summaryrefslogtreecommitdiffstats
path: root/include/drm/i915_component.h
AgeCommit message (Collapse)AuthorFilesLines
2021-10-04drm/i915/pxp: Define PXP component interfaceDaniele Ceraolo Spurio1-0/+1
This will be used for communication between the i915 driver and the mei one. Defining it in a stand-alone patch to avoid circualr dependedencies between the patches modifying the 2 drivers. Split out from an original patch from Huang, Sean Z v2: rename the component struct (Rodrigo) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-2-alan.previn.teres.alexis@intel.com
2019-07-11drm/i915/tgl: Add additional ports for Tiger LakeVandita Kulkarni1-1/+1
There are 2 new additional typeC ports in Tiger Lake and PORT-C is now a combophy port. This results in 6 typeC ports and 3 combophy ports. These 6 TC ports can be DP alternate mode, DP over thunderbolt, native DP on legacy DP connector or native HDMI on legacy connector. v2: Rebase on new modular FIA code (Lucas) v3: Also add new port in port_identifier(), even though it can't possibly be used there (requested by José) v4: Add conversion port->tc_port in helper function after introction of phy namespace (Lucas) Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-13-lucas.demarchi@intel.com
2019-02-15drm/i915: MEI interface definitionRamalingam C1-0/+1
Defining the mei-i915 interface functions and initialization of the interface. v2: Adjust to the new interface changes. [Tomas] Added further debug logs for the failures at MEI i/f. port in hdcp_port data is equipped to handle -ve values. v3: mei comp is matched for global i915 comp master. [Daniel] In hdcp_shim hdcp_protocol() is replaced with const variable. [Daniel] mei wrappers are adjusted as per the i/f change [Daniel] v4: port initialization is done only at hdcp2_init only [Danvet] v5: I915 registers a subcomponent to be matched with mei_hdcp [Daniel] v6: HDCP_disable for all connectors incase of comp_unbind. Tear down HDCP comp interface at i915_unload [Daniel] v7: Component init and fini are moved out of connector ops [Daniel] hdcp_disable is not called from unbind. [Daniel] Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> [v11] [danvet: For the topic/mei-hdcp shared branch drop everything but the header change needed by both drm/i915 and mei-hdcp. Also drop the no longer needed device.h include.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1550219730-17734-6-git-send-email-ramalingam.c@intel.com
2019-02-08i915/snd_hdac: I915 subcomponent for the snd_hdacDaniel Vetter1-0/+4
Since we need multiple components for I915 for different purposes (Audio & Mei_hdcp), we adopt the subcomponents methodology introduced by the previous patch (mentioned below). Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Jan 28 17:08:20 2019 +0530 components: multiple components for a device Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by-by: Ramalingam C <ramalinagm.c@intel.com> (commit message) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (code) cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Russell King <rmk+kernel@arm.linux.org.uk> cc: Rafael J. Wysocki <rafael@kernel.org> cc: Jaroslav Kysela <perex@perex.cz> cc: Takashi Iwai <tiwai@suse.com> cc: Rodrigo Vivi <rodrigo.vivi@intel.com> cc: Jani Nikula <jani.nikula@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190207232759.14553-4-daniel.vetter@ffwll.ch
2018-07-17drm/i915: Split audio component to a generic typeTakashi Iwai1-80/+5
For allowing other drivers to use the DRM audio component, rename the i915_audio_component_* with drm_audio_component_*, and split the generic part into drm_audio_component.h. The i915 specific stuff remains in struct i915_audio_component, which contains drm_audio_component as the base. The license of drm_audio_component.h is kept to MIT as same as the the original i915_component.h. This is a preliminary change for further development, and no functional changes by this patch itself, merely code-split and renames. v1->v2: Use SPDX for drm_audio_component.h, fix remaining i915 argument in drm_audio_component.h Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-01-19drm/i915/cnl: Add Port F definition.Rodrigo Vivi1-2/+1
Some Cannonlake SKUs will come with a full split between port A and port E. This will be called port F although it is not a 6th port, but only a split. Note this patch alone is not sufficient for port F enabling, it's just the first step. v2: Fix size of dvo_ports found by Ander. v3: Adding missing cases from intel_bios.c for Port_F v4: Adding other missing cases and fix the commit message. v5: Rebase on top of display headers rework. v6 (from Paulo): improve commit message, bikeshed bit definitions. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-2-paulo.r.zanoni@intel.com
2016-09-22drm/i915/dp: DP audio API changes for MSTPandiyan, Dhinakaran1-3/+3
DP MST provides the capability to send multiple video and audio streams through a single port. This requires the API's between i915 and audio drivers to distinguish between multiple audio capable displays that can be connected to a port. Currently only the port identity is shared in the APIs. This patch adds support for MST with an additional parameter 'int pipe'. The existing parameter 'port' does not change it's meaning. pipe = MST : display pipe that the stream originates from Non-MST : -1 Affected APIs: struct i915_audio_component_ops - int (*sync_audio_rate)(struct device *, int port, int rate); + int (*sync_audio_rate)(struct device *, int port, int pipe, + int rate); - int (*get_eld)(struct device *, int port, bool *enabled, - unsigned char *buf, int max_bytes); + int (*get_eld)(struct device *, int port, int pipe, + bool *enabled, unsigned char *buf, int max_bytes); struct i915_audio_component_audio_ops - void (*pin_eld_notify)(void *audio_ptr, int port); + void (*pin_eld_notify)(void *audio_ptr, int port, int pipe); This patch makes dummy changes in the audio drivers (thanks Libin) for build to succeed. The audio side drivers will send the right 'pipe' values for MST in patches that will follow. v2: Renamed the new API parameter from 'dev_id' to 'pipe'. (Jim, Ville) Included Asoc driver API compatibility changes from Jeeja. Added WARN_ON() for invalid pipe in get_saved_encoder(). (Takashi) Added comment for av_enc_map[] definition. (Takashi) v3: Fixed logic error introduced while renaming 'dev_id' as 'pipe' (Ville) Renamed get_saved_encoder() to get_saved_enc() to reduce line length v4: Rebased. Parameter check for pipe < -1 values in get_saved_enc() (Ville) Switched to for_each_pipe() in get_saved_enc() (Ville) Renamed 'pipe' to 'dev_id' in audio side code (Takashi) v5: Included a comment for the dev_id arg. (Libin) Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1474488168-2343-1-git-send-email-dhinakaran.pandiyan@intel.com
2015-12-10drm/i915: Add get_eld audio componentTakashi Iwai1-0/+14
Implement a new i915_audio_component_ops, get_eld(). It's called by the audio driver to fetch the current audio status and ELD of the given HDMI/DP port. It returns the size of expected ELD bytes if it's valid, zero if no valid ELD is found, or a negative error code. The current state of audio on/off is stored in the given pointer, too. Note that the returned size isn't limited to the given max bytes. If the size is greater than the max bytes, it means that only a part of ELD has been copied back. For achieving this implementation, a new field audio_connector is added to struct intel_digital_port. It points to the connector assigned to the given digital port. It's set/reset at each audio enable/disable call in intel_audio.c, and protected with av_mutex. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-19drm/i915: Improve kernel-doc for i915_audio_component structDavid Henningsson1-18/+51
Signed-off-by: David Henningsson <david.henningsson@canonical.com> Link: http://patchwork.freedesktop.org/patch/msgid/1444987464-8657-1-git-send-email-david.henningsson@canonical.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-07drm/i915: add kerneldoc for i915_audio_componentLibin Yang1-27/+38
Add the kerneldoc for i915_audio_component in i915_component.h Signed-off-by: Libin Yang <libin.yang@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-25drm/i915: set proper N/CTS in modesetLibin Yang1-0/+10
When modeset occurs and the TMDS frequency is set to some speical values, the N/CTS need to be set manually if audio is playing. Signed-off-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-25drm/i915: Add audio sync_audio_rate callbackLibin Yang1-0/+7
Add the sync_audio_rate callback. With the callback, audio driver can trigger i915 driver to set the proper N/CTS or N/M based on different sample rates. Signed-off-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-03drm/i915: Drop port_mst_index parameter from pin/eld callbackDavid Henningsson1-2/+1
The port_mst_index parameter was reserved for future use, but maintainers prefer to add it later when it is actually used. [Note: this is an update patch to commit [51e1d83cab99: drm/i915: Call audio pin/ELD notify function] where I mistakenly applied the older version. Jani and Daniel's review tags were to the latest version, so I add them below, too -- tiwai] Signed-off-by: David Henningsson <david.henningsson@canonical.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-02drm/i915: Add audio pin sense / ELD callbackDavid Henningsson1-0/+12
This callback will be called by the i915 driver to notify the hda driver that its HDMI information needs to be refreshed, i e, that audio output is now available (or unavailable) - usually as a result of a monitor being plugged in (or unplugged). Signed-off-by: David Henningsson <david.henningsson@canonical.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-05drm/i915/audio: add codec wakeup override enabled/disable callbackLu, Han1-0/+1
Add support for enabling codec wakeup override signal to allow re-enumeration of the controller on SKL after resume from low power state. In SKL, HDMI/DP codec and PCH HD Audio Controller are in different power wells, so it's necessary to reset display audio codecs when power well on, otherwise display audio codecs will disappear when resume from low power state. Reset steps when power on: enable codec wakeup -> azx_init_chip() -> disable codec wakeup v3 by Jani: Simplify to only support toggling the appropriate chicken bit. v4 by Han: add explanation and specify the hw swquence. Signed-off-by: Lu, Han <han.lu@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12drm/i915: add component supportImre Deak1-0/+38
Register a component to be used to interface with the snd_hda_intel driver. This is meant to replace the same interface that is currently based on module symbol lookup. v2: - change roles between the hda and i915 components (Daniel) - add the implementation to a new file (Jani) - use better namespacing (Jani) v3: - move the implementation to intel_audio.c (Daniel) - rename display_component to audio_component (Daniel) - add kerneldoc (Daniel) v4: - run forgotten git rm i915_component.c (Jani) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>