summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci-mem.c
AgeCommit message (Collapse)AuthorFilesLines
2022-10-25xhci: Remove device endpoints from bandwidth list when freeing the deviceMathias Nyman1-8/+12
Endpoints are normally deleted from the bandwidth list when they are dropped, before the virt device is freed. If xHC host is dying or being removed then the endpoints aren't dropped cleanly due to functions returning early to avoid interacting with a non-accessible host controller. So check and delete endpoints that are still on the bandwidth list when freeing the virt device. Solves a list_del corruption kernel crash when unbinding xhci-pci, caused by xhci_mem_cleanup() when it later tried to delete already freed endpoints from the bandwidth list. This only affects hosts that use software bandwidth checking, which currenty is only the xHC in intel Panther Point PCH (Ivy Bridge) Cc: stable@vger.kernel.org Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221024142720.4122053-5-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()Jianglei Nie1-1/+6
xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak. We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential memory leak. Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12xhci: use generic command timer for stop endpoint commands.Mathias Nyman1-10/+2
The 'stop endpoint' command timer was started when a 'stop endpoint' command was added to the command queue. This can trigger unwanted timeouts if there are several pending commands in the queue that xHC needs to handle first. The generic command timer, which was added later than the 'stop endpoint' timeout timer, times each command currently being handled by xHC hardware. A timed out stop endpoint command was treated as a more severe issue than other failed commands, so the separate stop endpoint timer was left unchanged. Use the generic command timer for stop endpoint commands. Identify if the timed out command was a stop endpoint command in the generic handler, and treat it with the same severity as earlier. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220511220450.85367-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12xhci: prepare for operation w/o shared hcdHeiner Kallweit1-5/+6
This patch prepares xhci for the following scenario: - If either of the root hubs has no ports, then omit shared hcd - Main hcd can be USB3 if there are no USB2 ports Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220511220450.85367-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-03usb: host: xhci: fix a comment typo in xhci_mem_init()Linyu Yuan1-1/+1
It should be Device Context, not doorbell. Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220303110903.1662404-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-03usb: host: xhci: use ffs() in xhci_mem_init()Linyu Yuan1-5/+1
The for loop to find page size bit can be replaced with ffs(). Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220303110903.1662404-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-03xhci: make xhci_handshake timeout for xhci_reset() adjustableMathias Nyman1-1/+1
xhci_reset() timeout was increased from 250ms to 10 seconds in order to give Renesas 720201 xHC enough time to get ready in probe. xhci_reset() is called with interrupts disabled in other places, and waiting for 10 seconds there is not acceptable. Add a timeout parameter to xhci_reset(), and adjust it back to 250ms when called from xhci_stop() or xhci_shutdown() where interrupts are disabled, and successful reset isn't that critical. This solves issues when deactivating host mode on platforms like SM8450. For now don't change the timeout if xHC is reset in xhci_resume(). No issues are reported for it, and we need the reset to succeed. Locking around that reset needs to be revisited later. Additionally change the signed integer timeout parameter in xhci_handshake() to a u64 to match the timeout value we pass to readl_poll_timeout_atomic() Fixes: 22ceac191211 ("xhci: Increase reset timeout for Renesas 720201 host.") Cc: stable@vger.kernel.org Reported-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reported-by: Pavan Kondeti <quic_pkondeti@quicinc.com> Tested-by: Pavan Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220303110903.1662404-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-24xhci: omit mem read just after allocation of trbOliver Neukum1-1/+1
This has been allocated just a few lines earlier with a zalloc(). The value is known and "|=" is a waste of memory cycles. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220217133549.27961-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17usb: xhci: fix minmax.cocci warningskernel test robot1-2/+1
Simplify the code using max(). Generated by: scripts/coccinelle/misc/minmax.cocci Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220216095153.1303105-10-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17xhci: Allocate separate command structures for each LPM commandMathias Nyman1-7/+0
Every lpm commmand, both for USB 2 and USB 3 devies used the same xhci->lpm_command structure to change max exit latency. xhci->lpm_command is only protected by a hcd->bandwidth mutex, which is not enoungh as USB 2 and USB 3 devices are behind separate HCDs. Simplify code and avoid unnecessary locking risks by allocating separate command structures for each lpm command, just like with all other commands. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220216095153.1303105-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17xhci: solve a double free problem while doing s4Zhangjiantao (Kirin, nanjing)1-0/+1
when system is doing s4, the process of xhci_resume may be as below: 1、xhci_mem_cleanup 2、xhci_init->xhci_mem_init->xhci_mem_cleanup(when memory is not enough). xhci_mem_cleanup will be executed twice when system is out of memory. xhci->port_caps is freed in xhci_mem_cleanup,but it isn't set to NULL. It will be freed twice when xhci_mem_cleanup is called the second time. We got following bug when system resumes from s4: kernel BUG at mm/slub.c:309! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP CPU: 0 PID: 5929 Tainted: G S W 5.4.96-arm64-desktop #1 pc : __slab_free+0x5c/0x424 lr : kfree+0x30c/0x32c Call trace: __slab_free+0x5c/0x424 kfree+0x30c/0x32c xhci_mem_cleanup+0x394/0x3cc xhci_mem_init+0x9ac/0x1070 xhci_init+0x8c/0x1d0 xhci_resume+0x1cc/0x5fc xhci_plat_resume+0x64/0x70 platform_pm_thaw+0x28/0x60 dpm_run_callback+0x54/0x24c device_resume+0xd0/0x200 async_resume+0x24/0x60 async_run_entry_fn+0x44/0x110 process_one_work+0x1f0/0x490 worker_thread+0x5c/0x450 kthread+0x158/0x160 ret_from_fork+0x10/0x24 Original patch that caused this issue was backported to 4.4 stable, so this should be backported to 4.4 stabe as well. Fixes: cf0ee7c60c89 ("xhci: Fix memory leak when caching protocol extended capability PSI tables - take 2") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Jiantao Zhang <water.zhangjiantao@huawei.com> Signed-off-by: Tao Xue <xuetao09@huawei.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210617150354.1512157-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17xhci: Add adaptive interrupt rate for isoch TRBs with XHCI_AVOID_BEI quirkMathias Nyman1-0/+2
Save a bit of power by not interrupting so often by default if XHCI_AVOID_BEI quirk is set. In normal cases the xhci driver will only generate an interrupt on the last isochronous TRB of an URB. In a common UVC webcam usecase there are 32 TRBs per URB. if AVOID_BEI flag is set then xhci driver will force an interrupt every 8th isoc TRB to make sure the event ring doesn't get too full. This is however way too frequent in common single webcam use cases, causing 1000 interrupts/sec and thus poor powermanagement performance. Instead start with interrupting every 32 isoc TRB, and halve it in case event ring becomes half-full. Stop halving when reaching a rate of every 8th trb. This is a one way solution. If interrupt rate is increased it will stay high until driver is reloaded. The highest rate is the same as the old default rate. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210617150354.1512157-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-06xhci: check port array allocation was successful before dereferencing itMathias Nyman1-0/+3
return if rhub->ports is null after rhub->ports = kcalloc_node() Klockwork reported issue Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210406070208.3406266-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: xhci: Fix port minor revisionThinh Nguyen1-0/+9
Some hosts incorrectly use sub-minor version for minor version (i.e. 0x02 instead of 0x20 for bcdUSB 0x320 and 0x01 for bcdUSB 0x310). Currently the xHCI driver works around this by just checking for minor revision > 0x01 for USB 3.1 everywhere. With the addition of USB 3.2, checking this gets a bit cumbersome. Since there is no USB release with bcdUSB 0x301 to 0x309, we can assume that sub-minor version 01 to 09 is incorrect. Let's try to fix this and use the minor revision that matches with the USB/xHCI spec to help with the version checking within the driver. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/ed330e95a19dc367819c5b4d78bf7a541c35aa0a.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: xhci-mtk: support to build xhci-mtk-hcd.koChunfeng Yun1-1/+1
Currently xhci-hcd.ko building depends on USB_XHCI_MTK, this is not flexible for some cases. For example: USB_XHCI_HCD is y, and USB_XHCI_MTK is m, then we can't implement extended functions if only update xhci-mtk.ko This patch is used to remove the dependence. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/0b62e21ddfacc1c2874726dd27ccab80c993f303.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: remove xhci_stream_id_to_ring() helperMathias Nyman1-17/+0
The one case that used this function can use the xhci_triad_to_transfer_ring() helper instead. Avoid having several functions doing basically the same thing. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-9-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: adjust parameters passed to cleanup_halted_endpoint()Mathias Nyman1-0/+2
Instead of passing slot id and endpoint index to cleanup_halted_endpoint() pass the endpoint structure pointer as it's already known. Avoids again digging out the endpoint structure based on slot id and endpoint index, and passing them along the call chain for this purpose only. Add slot_id to the virt_dev structure so that it can easily be found from a virt_dev, or its child, the virt_ep endpoint structure. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: Avoid parsing transfer events several timesMathias Nyman1-0/+2
When handling transfer events the event is passed along the handling callpath and parsed again in several occasions. The event contains slot_id and endpoint index, from which the driver endpoint structure can be found. There wasn't however a way to get the endpoint index or parent usb device from this endpoint structure. A lot of extra event parsing, and thus some DMA doublefetch cases, and excess variables and code can be avoided by adding endpoint index and parent usb virt device pointer to the endpoint structure. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-02Merge 5.10-rc2 into usb-nextGreg Kroah-Hartman1-2/+2
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29xhci: Fix sizeof() mismatchColin Ian King1-2/+2
An incorrect sizeof() is being used, sizeof(rhub->ports) is not correct, it should be sizeof(*rhub->ports). This bug did not cause any issues because it just so happens the sizes are the same. Fixes: bcaa9d5c5900 ("xhci: Create new structures to store xhci port information") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201028203124.375344-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28usb: xhci: Remove in_interrupt() checksAhmed S. Darwish1-1/+1
The usage of in_interrupt() in drivers is phased out for various reasons. xhci_set_hc_event_deq() has an !in_interrupt() check which is pointless because the function is only invoked from xhci_mem_init() which is clearly task context as it does GFP_KERNEL allocations. Remove it. xhci_urb_enqueue() prints a debug message if an URB is submitted after the underlying hardware was suspended. But that warning is only issued when in_interrupt() is true, which makes no sense. Simply return -ESHUTDOWN and be done with it. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Link: https://lore.kernel.org/r/20201019101110.148631116@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28usb: host: xhci-mem: remove unneeded breakTom Rix1-1/+0
A break is not needed if it is preceded by a return. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201026185812.1427461-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-23xhci: dbc: don't use generic xhci ring allocation functions for dbc.Mathias Nyman1-2/+2
The generic xhci ring allocations code needs struct xhci_hcd pointer, and it allocates memory for the rings from dma pools created for the xhci device. In order to decouple xhci and DbC we have to create our own ring allocation and free routines for DbC Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200723144530.9992-20-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23xhci: Don't pass struct xhci_hcd pointer to xhci_link_seg()Mathias Nyman1-11/+20
It's only used to dig out if we need to set a chain flag for specific hosts. Pass the flag directly as a parameter instead. No functional changes. xhci_link_seg() is also used by DbC code, this change helps decoupling xhci and DbC. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200723144530.9992-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: host: xhci-mem: Demote obvious misuse of kerneldoc to standard comment ↵Lee Jones1-1/+1
block No attempt has been made to document the demoted function here. Fixes the following W=1 kernel build warning(s): drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'xhci' not described in 'xhci_ring_alloc' drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'num_segs' not described in 'xhci_ring_alloc' drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'cycle_state' not described in 'xhci_ring_alloc' drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'type' not described in 'xhci_ring_alloc' drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'max_packet' not described in 'xhci_ring_alloc' drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'flags' not described in 'xhci_ring_alloc' Cc: Mathias Nyman <mathias.nyman@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-15-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12xhci: Wait until link state trainsits to U0 after setting USB_SS_PORT_LS_U0Kai-Heng Feng1-0/+1
Like U3 case, xHCI spec doesn't specify the upper bound of U0 transition time. The 20ms is not enough for some devices. Intead of polling PLS or PLC, we can facilitate the port change event to know that the link transits to U0 is completed. While at it, also separate U0 and U3 case to make the code cleaner. [variable rename to u3exit, and skip completion for usb2 ports -Mathias ] Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200312144517.1593-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-12xhci: Fix memory leak when caching protocol extended capability PSI tables - ↵Mathias Nyman1-22/+37
take 2 xhci driver assumed that xHC controllers have at most one custom supported speed table (PSI) for all usb 3.x ports. Memory was allocated for one PSI table under the xhci hub structure. Turns out this is not the case, some controllers have a separate "supported protocol capability" entry with a PSI table for each port. This means each usb3 roothub port can in theory support different custom speeds. To solve this, cache all supported protocol capabilities with their PSI tables in an array, and add pointers to the xhci port structure so that every port points to its capability entry in the array. When creating the SuperSpeedPlus USB Device Capability BOS descriptor for the xhci USB 3.1 roothub we for now will use only data from the first USB 3.1 capable protocol capability entry in the array. This could be improved later, this patch focuses resolving the memory leak. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com> Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Cc: stable <stable@vger.kernel.org> # v4.4+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200211150158.14475-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-12Revert "xhci: Fix memory leak when caching protocol extended capability PSI ↵Greg Kroah-Hartman1-36/+22
tables" This reverts commit fc57313d1017dd6b6f37a94e88daa8df54368ecc. Marek reports that it breaks things: This patch landed in today's linux-next (20200211) and causes NULL pointer dereference during second suspend/resume cycle on Samsung Exynos5422-based (arm 32bit) Odroid XU3lite board: A more complete fix will be added soon. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: fc57313d1017 ("xhci: Fix memory leak when caching protocol extended capability PSI tables") Cc: Paul Menzel <pmenzel@molgen.mpg.de> Cc: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com> Cc: stable <stable@vger.kernel.org> # v4.4+ Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10xhci: Fix memory leak when caching protocol extended capability PSI tablesMathias Nyman1-22/+36
xhci driver assumed that xHC controllers have at most one custom supported speed table (PSI) for all usb 3.x ports. Memory was allocated for one PSI table under the xhci hub structure. Turns out this is not the case, some controllers have a separate "supported protocol capability" entry with a PSI table for each port. This means each usb3 roothub port can in theory support different custom speeds. To solve this, cache all supported protocol capabilities with their PSI tables in an array, and add pointers to the xhci port structure so that every port points to its capability entry in the array. When creating the SuperSpeedPlus USB Device Capability BOS descriptor for the xhci USB 3.1 roothub we for now will use only data from the first USB 3.1 capable protocol capability entry in the array. This could be improved later, this patch focuses resolving the memory leak. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com> Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Cc: stable <stable@vger.kernel.org> # v4.4+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200210134553.9144-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10xhci: Force Maximum Packet size for Full-speed bulk devices to valid range.Mathias Nyman1-3/+9
A Full-speed bulk USB audio device (DJ-Tech CTRL) with a invalid Maximum Packet Size of 4 causes a xHC "Parameter Error" at enumeration. This is because valid Maximum packet sizes for Full-speed bulk endpoints are 8, 16, 32 and 64 bytes. Hosts are not required to support other values than these. See usb 2 specs section 5.8.3 for details. The device starts working after forcing the maximum packet size to 8. This is most likely the case with other devices as well, so force the maximum packet size to a valid range. Cc: stable@vger.kernel.org Reported-by: Rene D Obermueller <cmdrrdo@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200210134553.9144-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: Fix memory leak in xhci_add_in_port()Mika Westerberg1-0/+4
When xHCI is part of Alpine or Titan Ridge Thunderbolt controller and the xHCI device is hot-removed as a result of unplugging a dock for example, the driver leaks memory it allocates for xhci->usb3_rhub.psi and xhci->usb2_rhub.psi in xhci_add_in_port() as reported by kmemleak: unreferenced object 0xffff922c24ef42f0 (size 16): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 16 bytes): 21 00 0c 00 12 00 dc 05 23 00 e0 01 00 00 00 00 !.......#....... backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 unreferenced object 0xffff922c24ef3318 (size 8): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 8 bytes): 34 01 05 00 35 41 0a 00 4...5A.. backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 Fix this by calling kfree() for the both psi objects in xhci_mem_cleanup(). Cc: <stable@vger.kernel.org> # 4.4+ Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25usb: host: Remove call to memset after dma_alloc_coherentFuqian Huang1-1/+0
In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Link: https://lore.kernel.org/r/20190715032010.7258-1-huangfq.daxian@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-21usb: xhci: fix build warning - missing prototypeJean-Philippe Menil1-1/+1
Fix build warning when building drivers/usb/host/xhci-mem.o with W=1 due to missing prototype for xhci_free_virt_devices_depth_first. This function is only used in xhci-mem.c so just make it static. Signed-off-by: Jean-Philippe Menil <jpmenil@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain1-4/+4
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-07xhci: move bus_state structure under the xhci_hub structure.Mathias Nyman1-5/+5
Move the bus_state structure under struct usb_hub. We need a bus_state strucure for each roothub to keep track of suspend related info for each port. Instead of keeping an array of two bus_state structures right under struct xhci, it makes more sense move them to the xhci_hub structure. No functional changes. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-07xhci: remove the unused sw_lpm_supportZeng Tao1-16/+4
It is introduced for the pre-0.96 xHC controllers, and the driver only support HW LPM for 1.0 and later controllers.It's not actually used now and is thought not to be used in the future any more, so just remove it. Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10usb: xhci: fix interrupt transfer error happened on MTK platformsChunfeng Yun1-0/+4
The MTK xHCI controller use some reserved bytes in endpoint context for bandwidth scheduling, so need keep them in xhci_endpoint_copy(); The issue is introduced by: commit f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") It resets endpoints and will drop bandwidth scheduling parameters used by interrupt or isochronous endpoints on MTK xHCI controller. Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06xhci: xhci-mem: off by one in xhci_stream_id_to_ring()Dan Carpenter1-1/+1
The > should be >= here so that we don't read one element beyond the end of the ep->stream_info->stream_rings[] array. Fixes: e9df17eb1408 ("USB: xhci: Correct assumptions about number of rings per endpoint.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25xhci: Fix kernel oops in trace_xhci_free_virt_deviceZhengjun Xing1-2/+2
commit 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device") set dev->udev pointer to NULL in xhci_free_dev(), it will cause kernel panic in trace_xhci_free_virt_device. This patch reimplement the trace function trace_xhci_free_virt_device, remove dev->udev dereference and added more useful parameters to show in the trace function,it also makes sure dev->udev is not NULL before calling trace_xhci_free_virt_device. This issue happened when xhci-hcd trace is enabled and USB devices hot plug test. Original use-after-free patch went to stable so this needs so be applied there as well. [ 1092.022457] usb 2-4: USB disconnect, device number 6 [ 1092.092772] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 1092.101694] PGD 0 P4D 0 [ 1092.104601] Oops: 0000 [#1] SMP [ 1092.207734] Workqueue: usb_hub_wq hub_event [ 1092.212507] RIP: 0010:trace_event_raw_event_xhci_log_virt_dev+0x6c/0xf0 [ 1092.220050] RSP: 0018:ffff8c252e883d28 EFLAGS: 00010086 [ 1092.226024] RAX: ffff8c24af86fa84 RBX: 0000000000000003 RCX: ffff8c25255c2a01 [ 1092.234130] RDX: 0000000000000000 RSI: 00000000aef55009 RDI: ffff8c252e883d28 [ 1092.242242] RBP: ffff8c252550e2c0 R08: ffff8c24af86fa84 R09: 0000000000000a70 [ 1092.250364] R10: 0000000000000a70 R11: 0000000000000000 R12: ffff8c251f21a000 [ 1092.258468] R13: 000000000000000c R14: ffff8c251f21a000 R15: ffff8c251f432f60 [ 1092.266572] FS: 0000000000000000(0000) GS:ffff8c252e880000(0000) knlGS:0000000000000000 [ 1092.275757] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1092.282281] CR2: 0000000000000000 CR3: 0000000154209001 CR4: 00000000003606e0 [ 1092.290384] Call Trace: [ 1092.293156] <IRQ> [ 1092.295439] xhci_free_virt_device.part.34+0x182/0x1a0 [ 1092.301288] handle_cmd_completion+0x7ac/0xfa0 [ 1092.306336] ? trace_event_raw_event_xhci_log_trb+0x6e/0xa0 [ 1092.312661] xhci_irq+0x3e8/0x1f60 [ 1092.316524] __handle_irq_event_percpu+0x75/0x180 [ 1092.321876] handle_irq_event_percpu+0x20/0x50 [ 1092.326922] handle_irq_event+0x36/0x60 [ 1092.331273] handle_edge_irq+0x6d/0x180 [ 1092.335644] handle_irq+0x16/0x20 [ 1092.339417] do_IRQ+0x41/0xc0 [ 1092.342782] common_interrupt+0xf/0xf [ 1092.346955] </IRQ> Fixes: 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device") Cc: <stable@vger.kernel.org> Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12treewide: kzalloc_node() -> kcalloc_node()Kees Cook1-2/+2
The kzalloc_node() function has a 2-factor argument form, kcalloc_node(). This patch replaces cases of: kzalloc_node(a * b, gfp, node) with: kcalloc_node(a * b, gfp, node) as well as handling cases of: kzalloc_node(a * b * c, gfp, node) with: kzalloc_node(array3_size(a, b, c), gfp, node) as it's slightly less ugly than: kcalloc_node(array_size(a, b), c, gfp, node) This does, however, attempt to ignore constant size factors like: kzalloc_node(4 * 1024, gfp, node) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc_node( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc_node( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc_node( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(char) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc_node + kcalloc_node ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc_node( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc_node( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc_node( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc_node( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc_node(C1 * C2 * C3, ...) | kzalloc_node( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc_node( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc_node( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc_node( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc_node(sizeof(THING) * C2, ...) | kzalloc_node(sizeof(TYPE) * C2, ...) | kzalloc_node(C1 * C2 * C3, ...) | kzalloc_node(C1 * C2, ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - (E1) * E2 + E1, E2 , ...) | - kzalloc_node + kcalloc_node ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc_node + kcalloc_node ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-01usb: xhci: force all memory allocations to nodeAdam Wallis1-19/+38
The xhci driver forces DMA memory to be node aware, however, there are several ring-related memory allocations that are not memory node aware. This patch resolves those *alloc functions to be allocated on the proper memory node. Signed-off-by: Adam Wallis <awallis@codeaurora.org> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: xhci-mem: remove port_arrays and the code initializing themMathias Nyman1-89/+11
As we are now using the new port strtuctes the port_arrays are no longer needed, remove them completely Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: Create new structures to store xhci port informationMathias Nyman1-1/+57
Current way of having one array telling only the port speed, and then two separate arrays with mmio addresses for usb2 and usb3 ports requeres helper functions to transate hw to hcd, and hcd to hw port numbers, and is hard to expand. Instead create a structure describing a port, including the mmio address, the port hardware index, hcd port index, and a pointer to the roothub it belongs to. Create one array containing all port structures in the same order the hardware controller sees them. Then add an array of port pointers to each xhci hub structure pointing to the ports that belonging to the roothub. This way we can easily convert hw indexed port events to usb core hcd port numbers, and vice versa usb core hub hcd port numbers to hw index and mmio address. Other benefit is that we can easily find the parent hcd and xhci structure of a port structure. This is useful in debugfs where we can give one port structure pointer as parameter and get both the correct mmio address and xhci lock needed to set some port parameter. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-16xhci: zero usb device slot_id member when disabling and freeing a xhci slotMathias Nyman1-0/+2
set udev->slot_id to zero when disabling and freeing the xhci slot. Prevents usb core from calling xhci with a stale slot id. xHC controller may be reset during resume to recover from some error. All slots are unusable as they are disabled and freed. xhci driver starts slot enumeration again from 1 in the order they are enabled. In the worst case a stale udev->slot_id for one device matches a newly enabled slot_id for a different device, causing us to perform a action on the wrong device. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-04USB: host: Use zeroing memory allocator rather than allocator/memsetHimanshu Jha1-5/+2
Use dma_zalloc_coherent for allocating zeroed memory and remove unnecessary memset function. Done using Coccinelle. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci 0-day tested with no failures. Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-18Merge 4.15-rc4 into usb-nextGreg Kroah-Hartman1-4/+18
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-08xhci: Don't add a virt_dev to the devs array before it's fully allocatedMathias Nyman1-4/+11
Avoid null pointer dereference if some function is walking through the devs array accessing members of a new virt_dev that is mid allocation. Add the virt_dev to xhci->devs[i] _after_ the virt_device and all its members are properly allocated. issue found by KASAN: null-ptr-deref in xhci_find_slot_id_by_port "Quick analysis suggests that xhci_alloc_virt_device() is not mutex protected. If so, there is a time frame where xhci->devs[slot_id] is set but not fully initialized. Specifically, xhci->devs[i]->udev can be NULL." Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-08usb: xhci: Cleanup printk debug message for registersLu Baolu1-4/+0
The content of each register has been exposed through debugfs. There is no need to dump register content with printk in code lines. Remove them to make code more concise and readable. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-08usb: xhci: Make some static functions globalLu Baolu1-39/+55
This patch makes some static functions global to avoid duplications in different files. These functions can be used in the implementation of xHCI debug capability. There is no functional change. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-03 15:27:54 +0000