summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget/dummy_hcd.c
AgeCommit message (Collapse)AuthorFilesLines
2014-07-16usb: gadget: Gadget directory cleanup - group UDC driversAndrzej Pietrasiewicz1-2764/+0
The drivers/usb/gadget directory contains many files. Files which are related can be distributed into separate directories. This patch moves the UDC drivers into a separate directory. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-27usb: gadget: make return of 0 explicitJulia Lawall1-3/+1
Delete unnecessary local variable whose value is always 0 and that hides the fact that the result is always 0. A simplified version of the semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression ret; expression e; position p; @@ -ret = 0; ... when != ret = e return - ret + 0 ; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-17usb: gadget: add "maxpacket_limit" field to struct usb_epRobert Baldyga1-1/+1
This patch adds "maxpacket_limit" to struct usb_ep. This field contains maximum value of maxpacket supported by driver, and is set in driver probe. This value should be used by autoconfig() function, because value of field "maxpacket" is set to value from endpoint descriptor when endpoint becomes enabled. So when autoconfig() function will be called again for this endpoint, "maxpacket" value will contain wMaxPacketSize from descriptior instead of maximum packet size for this endpoint. For this reason this patch adds new field "maxpacket_limit" which contains value of maximum packet size (which defines maximum endpoint capabilities). This value is used in ep_matches() function used by autoconfig(). Value of "maxpacket_limit" should be set in UDC driver probe function, using usb_ep_set_maxpacket_limit() function, defined in gadget.h. This function set choosen value to both "maxpacket_limit" and "maxpacket" fields. This patch modifies UDC drivers by adding support for maxpacket_limit. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-11usb: Remove unnecessary semicolonsJoe Perches1-3/+3
These aren't necessary after switch and if blocks. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17usb: gadget: fix a bug and a WARN_ON in dummy-hcdAlan Stern1-3/+4
This patch fixes a NULL pointer dereference and a WARN_ON in dummy-hcd. These things were the result of moving to the UDC core framework, and possibly of changes to that framework. Now unloading a gadget driver causes the UDC to be stopped after the gadget driver is unbound, not before. Therefore the "driver" argument to dummy_udc_stop() can be NULL, so we must not try to print the driver's name without checking first. Also, the UDC framework automatically unregisters the gadget when the UDC is deleted. Therefore a sysfs attribute file attached to the gadget must be removed before the UDC is deleted, not after. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-27USB: gadget: audit sysfs attribute permissionsGreg Kroah-Hartman1-4/+4
Convert all USB gadget sysfs attributes to use the _RO or _RW variants, to make them easier to audit and ensure that the permissions are correct. Note, two are left using the DEVICE_ATTR() macro, as there is no DEVICE_ATTR_WO() in Linus's tree, that will happen after 3.12-rc1 is out, a follow-on patch will be sent then. Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -- drivers/usb/gadget/composite.c | 8 +++----- drivers/usb/gadget/dummy_hcd.c | 8 ++++---- drivers/usb/gadget/f_mass_storage.c | 14 ++++++-------- drivers/usb/gadget/net2272.c | 4 ++-- drivers/usb/gadget/net2280.c | 18 +++++++++--------- drivers/usb/gadget/storage_common.c | 25 ++++++++++++------------- drivers/usb/gadget/udc-core.c | 14 +++++++------- 7 files changed, 43 insertions(+), 48 deletions(-)
2013-05-15usb: gadget: dummy_hcd: fix error return code in init()Wei Yongjun1-1/+3
Fix to return -ENOMEM in the kzalloc() error handling case instead of 0(following platform_device_add_data() will overwrite it to 0), as done elsewhere in this function. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-15usb: gadget: dummy_hcd: Remove redundant platform_set_drvdata()Sachin Kamat1-1/+0
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-27usb: gadget: dummy: fix sparse warningFelipe Balbi1-1/+1
fix the following sparse warning: drivers/usb/gadget/dummy_hcd.c:1912:12: warning: symbol 'usb3_bos_desc' was not declared. Should it be static? Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: dummy_hcd: don't assign gadget.dev.release directlyFelipe Balbi1-6/+0
udc-core provides a better way to handle release methods, let's use it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: dummy_hcd: don't touch gadget.dev.driverFelipe Balbi1-2/+0
udc-core now handles that for us, which means we can remove it from our driver. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: drop now unnecessary flagFelipe Balbi1-1/+0
We don't need the ->register_my_device flag anymore because all UDC drivers have been properly converted. Let's remove every history of it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: dummy_hcd: let udc-core manage gadget->devFelipe Balbi1-9/+1
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-12-13usb: gadget: dummy: fix enumeration with g_multiSebastian Andrzej Siewior1-4/+5
If we do have endpoints named like "ep-a" then bEndpointAddress is counted internally by the gadget framework. If we do have endpoints named like "ep-1" then bEndpointAddress is assigned from the digit after "ep-". If we do have both, then it is likely that after we used up the "generic" endpoints we will use the digits and thus assign one bEndpointAddress to multiple endpoints. This theory can be proofed by using the completely enabled g_multi. Without this patch, the mass storage won't enumerate and times out because it shares endpoints with RNDIS. This patch also adds fills up the endpoints list so we have in total endpoints 1 to 15 in + out available while some of them are restricted to certain types like BULK or ISO. Without this change the nokia gadget won't load because the system does not provide enough (BULK) endpoints but it did before ep-a - ep-f were removed. Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31usb: gadget: dummy_hcd: remove global the_controller variableSebastian Andrzej Siewior1-22/+49
The one thing that makes two UDCs+HCDs impossible is the global the_controller variable. This patch changes this. After device allocation we allocate the "the_controller" variable and pass it as platform_data to the UDC and its companion. We can have now multiple instances dummy hcd and therefore I change the limit from one to two. I was able to test this with g_ncm adn g_zero: |# lsusb |Bus 001 Device 002: ID 0525:a4a0 Netchip Technology, Inc. Linux-USB "Gadget Zero" |Bus 002 Device 002: ID 0525:a4a1 Netchip Technology, Inc. Linux-USB Ethernet Gadget |Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub |Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub I was able to start testusb -a and ifconfig usb[01] up with no complains. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31usb: gadget: dummy_hcd: add setup / cleanup of multiple HW intancesSebastian Andrzej Siewior1-25/+72
This patch creates & adds multiple instances of the HCD and UDC. We have a new module option "num" which says how many emulated UDCs + HCDs we want. The default value is one and currently the maximum is one as well. This will change soon. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31usb: gadget: dummy_hdc: prepare for multiple instancesSebastian Andrzej Siewior1-16/+16
This patch replaces the single pdev variable by an array. One change: The device id is no longer -1 (i.e. none) but 0. This is prepation work for multiple instances of the dummy_hcd + udc which should help to test gadget framework with multiple UDCs. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-16Merge 3.6-rc6 into usb-nextGreg Kroah-Hartman1-4/+37
This resolves the merge problems with: drivers/usb/dwc3/gadget.c drivers/usb/musb/tusb6010.c that had been seen in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06usb: gadget: dummy_hcd: add support for USB_DT_BOS on rhSebastian Andrzej Siewior1-0/+33
Without a reply for USB_DT_BOS the USB3 mode does not work since 448b6eb1 ("USB: Make sure to fetch the BOS desc for roothubs.). Cc: stable@vger.kernel.org #v3.5 Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: gadget: dummy_hcd: fixup error probe pathSebastian Andrzej Siewior1-4/+4
If USB2 host controller probes fine but USB3 does not then we don't remove the USB controller properly and lock up the system while the HUB code will try to enumerate the USB2 controller and access memory which is no longer available in case the dummy_hcd was compiled as a module. This is a problem since 448b6eb1 ("USB: Make sure to fetch the BOS desc for roothubs.) if used in USB3 mode because dummy does not provide this descriptor and explodes later. Cc: stable@vger.kernel.org # v3.5 Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31usb: gadget: dummy-hcd: remember to update driver pointerAlan Stern1-0/+2
This patch (as1599) fixes dummy-hcd to make it update the appropriate driver pointer when a new gadget driver is bound or unbound. Without this change, the gadget driver's name doesn't appear in dev_printk output. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-05-11usb: gadget: dummy_hcd: fix build when BUG is not setSasha Levin1-1/+1
Use WARN_ON() instead of __WARN, which also means we won't use any internal macros. Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07Merge tag 'gadget-for-v3.5' of ↵Greg Kroah-Hartman1-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: gadget: patches for v3.5 This pull request is quite big, but mainly because there's a giant rework of the s3c_hsotg.c driver to make it friendlier for other users. Samsung Exynos platforms use the DesignWare Core USB2 IP from Synopsys so it's a bit unfair to have the driver work for Samsung platforms only. In short, the big rework is in preparation to make the driver more reusable. Another big rework in this pull request came from Ido, where he's removing the redundant pointer for the endpoint descriptor from the controller driver's own endpoint representation. The same pointer is available through the generic struct usb_ep structure. Also on this pull request is the conversion of a few extra controller drivers to the new style registration, which allows multiple controllers to be available on the same platform and helps remove global pointers from those drivers. Together with those big changes, there's the usual fixes and cleanups to gadget drivers. Nothing major.
2012-05-04usb: gadget: dummy_hcd: allow to free requests on disabled endpointsSebastian Andrzej Siewior1-5/+3
ep->desc is set to NULL on endpoint disable. That means once an endpoint is disabled it is not possible to free requests. In my target gadget I first disable endpoints to make sure I have no requests on the fly and then free frequests. On dummy I am leaking memory here. Since I can't imagine a reason why it should be a bad thing, lets allow to free requests on disabled endpoints. On removal of composite the ep0 request is removed so lets allow that here as well. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-04-19usb: gadget: dummy: do not call pullup() on udc_stop()Felipe Balbi1-1/+0
pullup() is already called properly by udc-core.c and there's no need to call it from udc_stop(), in fact that will cause issues. Cc: stable@vger.kernel.org Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-28Remove all #inclusions of asm/system.hDavid Howells1-1/+0
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-02usb: gadget: dummy_hcd: signedness bug in transfer()Dan Carpenter1-1/+1
"len" is unsigned so it's never less than zero. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09usb: gadget: dummy_hcd: fix null-deref free reqSebastian Andrzej Siewior1-1/+3
_ep to ep is a pointer substraction so ep won't be zero unless _ep was 8. This was not intendent by the author, it was probably a typo while checking for NULL of the argument. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-09usb: gadget: dummy_hcd: don't assign ->desc on error caseSebastian Andrzej Siewior1-1/+1
If the stream check fails then we leave ep->desc assigend but we return with an error code. The caller assumes the endpoint is not enabled (which is the case) but it can not enable it again due to this assigment. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: gadget: dummy_hcd: clean up checkpatchSebastian Andrzej Siewior1-221/+211
This patch converts checkpatch output of |./scripts/checkpatch.pl drivers/usb/gadget/dummy_hcd.c -file from |total: 22 errors, 174 warnings, 2642 lines checked to |total: 0 errors, 0 warnings, 2632 lines checked Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: dummy_hcd: use usb_endpoint_type()Sebastian Andrzej Siewior1-3/+3
This patch makes use of usb_endpoint_type() instead of the open coding. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: gadget: dummy_hcd: complete stream supportSebastian Andrzej Siewior1-16/+181
dummy_hcd provides (alloc|free)_stream() callbacks but there are not doing anything. The transfer side also lacks matching of streams. This patch changes this and implements stream allocation / de-allocation support and proper urb <=> req matching. The UDC side exposes a limit of 16 streams. DWC3, the only USB3 UDC has no limitations in this regard except that it _needs_ to know that streams will be used at the ep_enable time. At the host side, there is no real limit either: XHCI can allocate any number of streams as long as it does not run out of memory. The UAS gadget currently requests 16 streams and the UAS host side fallbacks from the requested 256 down to 16 which is fine. From the UASP point of view (the only specified user), the number of used streams does not really matter. The only limitation is that the host may not use a higher stream than the gadget requested and can deal with. The dummy stream support has been modelled after current UAS + XHCI + DWC3 + UASP usage which helps me testing: - the device announces that each ep supports 16 streams (even it could more than that). - the device side looks into Companion descriptor at ep_enable time and enables them according to it. - the host side tries to enable the requested number of streams but the upper limit is the Comanion descriptor. None (zero streams) is an error condition, less is okay. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: gadget: dummy_hcd: make alloc/free streams staticSebastian Andrzej Siewior1-2/+2
There is no reason why dummy_alloc_streams() and dummy_free_streams() are global. Make them static instead. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: gadget: dummy_hcd: rename dummy_udc_udpate_ep0() to dummy_udc_update_ep0()Sebastian Andrzej Siewior1-2/+2
This renames a function so "update" is spelled properly. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: gadget: dummy_hcd: add sg supportSebastian Andrzej Siewior1-13/+67
This patch adds sg support to dummy_hcd. It seems that uas is not able to work with a hcd which does not support sg only based transfers. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: gadget: dummy_hcd: move the transfer part into its own functionSebastian Andrzej Siewior1-9/+19
This patch moves the part of the code which does the bare transfer into its function. It is a preparion for the implementation of sg support. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: gadget: dummy_hcd: initialize max_streams earlySebastian Andrzej Siewior1-9/+3
While playing with uasp I noticed that it does not work with dummy_hcd. The problem is that uasp requires a stream capable endpoint which it is requesting at bind time like every other gadget. dummy_hcd however initializes the max_stream value after connect once it knows if it runs at SS or not. I don't think that it is might be wrong to initialize the stream capability even at HS speed. The gadget may not use this descriptor at HS speed so it should not cause any damage. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: rename usb_gadget_driver::speed to max_speedMichal Nazarewicz1-7/+6
This commit renames the “speed” field of the usb_gadget_driver structure to “max_speed”. This is so that to make it more apparent that the field represents the maximum speed gadget driver can support. This also make the field look more like fields with the same name in usb_gadget and usb_composite_driver structures. All of those represent the *maximal* speed given entity supports. After this commit, there are the following fields in various structures: * usb_gadget::speed - the current connection speed, * usb_gadget::max_speed - maximal speed UDC supports, * usb_gadget_driver::max_speed - maximal speed gadget driver supports, and * usb_composite_driver::max_speed - maximal speed composite gadget supports. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: replace usb_gadget::is_dualspeed with max_speedMichal Nazarewicz1-1/+1
This commit replaces usb_gadget's is_dualspeed field with a max_speed field. [ balbi@ti.com : Fixed DWC3 driver ] Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-09-09usb gadget: clean up FSF boilerplate textKlaus Schwarzkopf1-9/+0
remove the following two paragraphs as they are not needed: This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc.,59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. Signed-off-by: Klaus Schwarzkopf <schwarzkopf@sensortherm.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23USB: use usb_endpoint_maxp() instead of le16_to_cpu()Kuninori Morimoto1-2/+2
Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size instead of le16_to_cpu(desc->wMaxPacketSize). This patch fix it up Cc: Armin Fuerst <fuerst@in.tum.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Erdfelt <johannes@erdfelt.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Oliver Neukum <oliver@neukum.name> Cc: David Kubicek <dave@awk.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Brad Hards <bhards@bigpond.net.au> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de> Cc: David Brownell <david-b@pacbell.net> Cc: David Lopo <dlopo@chipidea.mips.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Xie Xiaobo <X.Xie@freescale.com> Cc: Li Yang <leoli@freescale.com> Cc: Jiang Bo <tanya.jiang@freescale.com> Cc: Yuan-hsin Chen <yhchen@faraday-tech.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Herbert Pötzl <herbert@13thfloor.at> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Roman Weissgaerber <weissg@vienna.at> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Florian Floe Echtler <echtler@fs.tum.de> Cc: Christian Lucht <lucht@codemercs.com> Cc: Juergen Stuber <starblue@sourceforge.net> Cc: Georges Toth <g.toth@e-biz.lu> Cc: Bill Ryder <bryder@sgi.com> Cc: Kuba Ober <kuba@mareimbrium.org> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01usb: gadget: dummy_hcd: convert to new-style udc-probeSebastian Andrzej Siewior1-35/+15
bind() and pull is moved to udc core, call callbacks are verified by the upper layer. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01usb: gadget: dummy_hcd: move selection of speed into ->pullup()Sebastian Andrzej Siewior1-25/+35
The configuration is static however we only know the speed after we have connected with the other side. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01usb: gadget: dummy_hcd: init is_otg in init_dummy_udc_hw()Sebastian Andrzej Siewior1-7/+4
This value is now assigned during bind(). The configuration depends on static values assigned by dummy driver itself. So there is no need to defer this assigment until one know the actuall speed since the configuration is static and known early. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01usb: gadget: dummy_hcd: move ep initialisation HW setupSebastian Andrzej Siewior1-23/+33
This is only required to be done once. There is no counter part to this in ->stop() so there is no need to re-do it next time. While here also init the max_stream size to 0 on SS speed. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01usb: gadget: dummy_hcd: move common bits of suspend/resume into one functionSebastian Andrzej Siewior1-19/+18
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01usb: gadget: remove net2280_set_fifo_mode()Sebastian Andrzej Siewior1-10/+0
This function has no user in my tree. It looks like it belongs to net2280 but it somehow morphed into the dummy_hcd. So I remove it before it spreads into more drivers. After some digging I figured out that the only user was removed in |commit 9079e91b5b5a84836e65cdc9128d2602e3beaef2 |Author: David Brownell <david-b@pacbell.net> |Date: Wed May 7 16:00:36 2008 -0700 | | USB: serial gadget: cleanup/reorg Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01usb: gadget: dummy_hcd: use less checks for USB_SPEED_SUPERSebastian Andrzej Siewior1-16/+14
Taking the correct struct once avoids doing the speed dance. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01usb: gadget: dummy_hcd: use gadget_to_dummy_hcd() where possibleSebastian Andrzej Siewior1-8/+3
gadget_to_dummy_hcd() already does the speed check, so it's unnecessary to unroll that all the time. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01usb: gadget: dummy_hcd: set gadget.is_otg before calling bind()Sebastian Andrzej Siewior1-7/+8
Before commit 53832daea ("usb: gadget: dummy_hcd: use the shared_hcd infrastructure") the is_otg field was set in dummy_udc_probe(). It seems to me that this field is used in gadget's bind function. Therefore I'm moving it before the bind() callback is called. Cc: Tatyana Brokhman <tlinder@codeaurora.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>