summaryrefslogtreecommitdiffstats
path: root/drivers/soc/qcom/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2022-12-05soc: qcom: Select REMAP_MMIO for ICC_BWMON driverManivannan Sadhasivam1-0/+1
ICC_BWMON driver uses REGMAP_MMIO for accessing the hardware registers. So select the dependency in Kconfig. Without this, there will be errors while building the driver with COMPILE_TEST only: ERROR: modpost: "__devm_regmap_init_mmio_clk" [drivers/soc/qcom/icc-bwmon.ko] undefined! make[1]: *** [scripts/Makefile.modpost:126: Module.symvers] Error 1 make: *** [Makefile:1944: modpost] Error 2 Cc: <stable@vger.kernel.org> # 6.0 Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Fixes: b9c2ae6cac40 ("soc: qcom: icc-bwmon: Add bandwidth monitoring driver") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221129072022.41962-1-manivannan.sadhasivam@linaro.org
2022-12-05soc: qcom: Select REMAP_MMIO for LLCC driverManivannan Sadhasivam1-0/+1
LLCC driver uses REGMAP_MMIO for accessing the hardware registers. So select the dependency in Kconfig. Without this, there will be errors while building the driver with COMPILE_TEST only: ERROR: modpost: "__devm_regmap_init_mmio_clk" [drivers/soc/qcom/llcc-qcom.ko] undefined! make[1]: *** [scripts/Makefile.modpost:126: Module.symvers] Error 1 make: *** [Makefile:1944: modpost] Error 2 Cc: <stable@vger.kernel.org> # 4.19 Fixes: a3134fb09e0b ("drivers: soc: Add LLCC driver") Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221129071201.30024-2-manivannan.sadhasivam@linaro.org
2022-08-29soc: qcom: Make QCOM_RPMPD depend on OFYueHaibing1-1/+1
WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS_OF Depends on [n]: PM_GENERIC_DOMAINS [=y] && OF [=n] Selected by [m]: - QCOM_RPMPD [=m] && PM [=y] && QCOM_SMD_RPM [=m] PM_GENERIC_DOMAINS_OF depends on OF, so QCOM_RPMPD also depends on it. Fixes: 7d0221fb5912 ("soc/qcom: Make QCOM_RPMPD select PM_GENERIC_DOMAINS/_OF") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220820113202.23940-1-yuehaibing@huawei.com
2022-07-16soc: qcom: Make QCOM_RPMPD depend on PMKonrad Dybcio1-0/+1
QCOM_RPMPD requires PM_GENERIC_DOMAINS/_OF, which in turns requires CONFIG_PM. I forgot about the latter in my earlier patch (it's still in -next as of the time of committing, hence no Fixes: tag). Fix it. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220707212158.32684-1-konrad.dybcio@somainline.org
2022-07-06soc: qcom: icc-bwmon: Add bandwidth monitoring driverKrzysztof Kozlowski1-0/+15
Bandwidth monitoring (BWMON) sits between various subsytems like CPU, GPU, Last Level caches and memory subsystem. The BWMON can be configured to monitor the data throuhput between memory and other subsytems. The throughput is measured within specified sampling window and is used to vote for corresponding interconnect bandwidth. Current implementation brings support for BWMON v4, used for example on SDM845 to measure bandwidth between CPU (gladiator_noc) and Last Level Cache (memnoc). Usage of this BWMON allows to remove fixed bandwidth votes from cpufreq (CPU nodes) thus achieve high memory throughput even with lower CPU frequencies. The driver was tested on SDM845. Co-developed-by: Thara Gopinath <thara.gopinath@gmail.com> Signed-off-by: Thara Gopinath <thara.gopinath@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220704121730.127925-3-krzysztof.kozlowski@linaro.org
2022-07-05soc/qcom: Make QCOM_RPMPD select PM_GENERIC_DOMAINS/_OFKonrad Dybcio1-0/+2
The driver uses generic genpd OF APIs and with a very minimal config where nothing else selects them, this driver will not probe, as of_genpd_add_provider_onecell will return -EOPNOTSUPP. Make sure to select these in Kconfig to prevent that. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220701073700.17124-1-konrad.dybcio@somainline.org
2021-10-26qcom: spm: allow compile-testingArnd Bergmann1-1/+1
ARM_QCOM_SPM_CPUIDLE can be selected when compile-testing on other architectures, but this causes a Kconfig warning for QCOM_SPM: WARNING: unmet direct dependencies detected for QCOM_SPM Depends on [n]: ARCH_QCOM [=n] Selected by [y]: - ARM_QCOM_SPM_CPUIDLE [=y] && CPU_IDLE [=y] && (ARM [=y] || ARM64) && (ARCH_QCOM [=n] || COMPILE_TEST [=y]) && !ARM64 && MMU [=y] Make it possible to also compile-test this one, which can be done now that v5.15-rc5 lets you select QCOM_SCM everywhere. Fixes: a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver") Fixes: 498ba2a8a275 ("cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration") Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-16soc: qcom: Add Sleep stats driverMahesh Sivasubramanian1-0/+10
Let's add a driver to read the stats from remote processor and export to debugfs. The driver creates "qcom_sleep_stats" directory in debugfs and adds files for various low power mode available. Below is sample output with command cat /sys/kernel/debug/qcom_sleep_stats/ddr count = 0 Last Entered At = 0 Last Exited At = 0 Accumulated Duration = 0 Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org> Signed-off-by: Lina Iyer <ilina@codeaurora.org> [mkshah: add subsystem sleep stats, create one file for each stat] Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1634107104-22197-3-git-send-email-mkshah@codeaurora.org
2021-09-27Merge tag '20210927135559.738-6-srinivas.kandagatla@linaro.org' into ↵Bjorn Andersson1-1/+1
drivers-for-5.16 v5.15-rc1 + 20210927135559.738-[23456]-srinivas.kandagatla@linaro.org This immutable branch is based on v5.15-rc1 and contains the following patches extending the existig APR driver to also implement GPR: 20210927135559.738-2-srinivas.kandagatla@linaro.org 20210927135559.738-3-srinivas.kandagatla@linaro.org 20210927135559.738-4-srinivas.kandagatla@linaro.org 20210927135559.738-5-srinivas.kandagatla@linaro.org 20210927135559.738-6-srinivas.kandagatla@linaro.org
2021-09-27soc: qcom: apr: Add GPR supportSrinivas Kandagatla1-1/+1
Qualcomm Generic Packet router aka GPR is the IPC mechanism found in AudioReach next generation signal processing framework to perform command and response messages between various processors. GPR has concepts of static and dynamic port, all static services like APM (Audio Processing Manager), PRM (Proxy resource manager) have fixed port numbers where as dynamic services like graphs have dynamic port numbers which are allocated at runtime. All GPR packet messages will have source and destination domain and port along with opcode and payload. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210927135559.738-6-srinivas.kandagatla@linaro.org
2021-09-21cpuidle: qcom_spm: Detach state machine from main SPM handlingAngeloGioacchino Del Regno1-0/+9
In commit a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver") the SPM driver has been converted to a generic CPUidle driver: that was mainly made to simplify the driver and that was a great accomplishment; Though, at that time, this driver was only applicable to ARM 32-bit SoCs, lacking logic about the handling of newer generation SAW. In preparation for the enablement of SPM features on AArch64/ARM64, split the cpuidle-qcom-spm driver in two: the CPUIdle related state machine (currently used only on ARM SoCs) stays there, while the SPM communication handling lands back in soc/qcom/spm.c and also making sure to not discard the simplifications that were introduced in the aforementioned commit. Since now the "two drivers" are split, the SCM dependency in the main SPM handling is gone and for this reason it was also possible to move the SPM initialization early: this will also make sure that whenever the SAW CPUIdle driver is getting initialized, the SPM driver will be ready to do the job. Please note that the anticipation of the SPM initialization was also done to optimize the boot times on platforms that have their CPU/L2 idle states managed by other means (such as PSCI), while needing SAW initialization for other purposes, like AVS control. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210729155609.608159-2-angelogioacchino.delregno@somainline.org
2020-10-27soc: qcom: Kconfig: make RPMH match Command DB settingLina Iyer1-0/+1
RPMH and drivers that use RPMH APIs need Command DB API to find the dynamic resource information. Let's match the RPMH to match the Command DB configuration. This should fix undefined symbol references reported by CI : aarch64-linux-ld: drivers/clk/qcom/clk-rpmh.o: in function `clk_rpmh_probe': >> clk-rpmh.c:(.text+0xac): undefined reference to `cmd_db_read_addr' >> aarch64-linux-ld: clk-rpmh.c:(.text+0xc0): undefined reference to `cmd_db_read_aux_data' aarch64-linux-ld: drivers/soc/qcom/rpmh-rsc.o: in function `rpmh_rsc_probe': >> rpmh-rsc.c:(.text+0x42c): undefined reference to `cmd_db_ready' aarch64-linux-ld: drivers/regulator/qcom-rpmh-regulator.o: in function `rpmh_regulator_probe': >> qcom-rpmh-regulator.c:(.text+0x3e0): undefined reference to `cmd_db_read_addr' Cc: Todd Kjos <tkjos@google.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Maulik Shah <mkshah@codeaurora.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Lina Iyer <ilina@codeaurora.org> Link: https://lore.kernel.org/r/20201008040907.7036-1-ilina@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-26soc: qcom: cmd-db: allow loading as a moduleLina Iyer1-1/+1
This patch enables Command DB driver to be loaded as a module. Command DB is inherent to RPMH interaction and as such would never be unloaded. Add supress_bind_attrs to make it a permanently loaded module. Reviewed-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Lina Iyer <ilina@codeaurora.org> Link: https://lore.kernel.org/r/20201001154144.5226-1-ilina@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-26soc: qcom: rpmh: Allow RPMH driver to be loaded as a moduleJohn Stultz1-1/+1
This patch allow the rpmh driver to be loaded as a permenent module. Meaning it can be loaded from a module, but then cannot be unloaded. Ideally, it would include a remove hook and related logic, but the rpmh driver is fairly core to the system, so once its loaded with almost anything else to get the system to go, the dependencies are not likely to ever also be removed. So making it a permanent module at least improves things slightly over requiring it to be a built in driver. Cc: Todd Kjos <tkjos@google.com> Cc: Saravana Kannan <saravanak@google.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rajendra Nayak <rnayak@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [mkshah: Fix typos in commit message, send after removing _rcuidle trace] Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1601877596-32676-3-git-send-email-mkshah@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-22PM: AVS: qcom-cpr: Move the driver to the qcom specific driversUlf Hansson1-0/+16
The avs drivers are all SoC specific drivers that doesn't share any code. Instead they are located in a directory, mostly to keep similar functionality together. From a maintenance point of view, it makes better sense to collect SoC specific drivers like these, into the SoC specific directories. Therefore, let's move the qcom-cpr driver to the qcom directory. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Niklas Cassel <nks@flawful.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-08-07Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "It looks like a smaller batch of clk updates this time around. In the core framework we just have some minor tweaks and a debugfs feature, so not much to see there. The driver updates are fairly well split between AT91 and Qualcomm clk support. Adding those two drivers together equals about 50% of the diffstat. Otherwise, the big amount of work this time was on supporting Broadcom's Raspberry Pi firmware clks. Highlights: Core: - Document clk_hw_round_rate() so it gets some more use - Remove unused __clk_get_flags() - Add a prepare/enable debugfs feature similar to rate setting New Drivers: - Add support for SAMA7G5 SoC clks - Enable CPU clks on Qualcomm IPQ6018 SoCs - Enable CPU clks on Qualcomm MSM8996 SoCs - GPU clk support for Qualcomm SM8150 and SM8250 SoCs - Audio clks on Qualcomm SC7180 SoCs - Microchip Sparx5 DPLL clk - Add support for the new Renesas RZ/G2H (R8A774E1) SoC Updates: - Make defines for bcm63xx-gate clks to use in DT - Support BCM2711 SoC firmware clks - Add HDMI clks for BCM2711 SoCs - Add RTC related clks on Ingenic SoCs - Support USB PHY clks on Ingenic SoCs - Support gate clks on BCM6318 SoCs - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs - Use poll_timeout functions in Rockchip clk driver - Support Rockchip rk3288w SoC variant - Mark mac_lbtest critical on Rockchip rk3188 - Add CAAM clock support for i.MX vf610 driver - Add MU root clock support for i.MX imx8mp driver - Amlogic g12: add neural network accelerator clock sources - Amlogic meson8: remove critical flag for main PLL divider - Amlogic meson8: add video decoder clock gates - Convert one more Renesas DT binding to json-schema - Enhance critical clock handling on Renesas platforms to only consider clocks that were enabled at boot time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (79 commits) clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845 ipq806x: gcc: add support for child probe clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static clk: qcom: ipq8074: Add correct index for PCIe clocks clk: <linux/clk-provider.h>: drop a duplicated word clk: renesas: cpg-mssr: Add r8a774e1 support dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1 clk: Drop duplicate selection in Kconfig clk: qcom: smd: Add support for MSM8992/4 rpm clocks clk: qcom: ipq8074: Add missing clocks for pcie dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe Replace HTTP links with HTTPS ones: Common CLK framework clk: qcom: Add CPU clock driver for msm8996 dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996 soc: qcom: Separate kryo l2 accessors from PMU driver clk: meson: meson8b: add the vclk2_en gate clock clk: meson: meson8b: add the vclk_en gate clock clk: qcom: Fix return value check in apss_ipq6018_probe() clk: bcm: dvp: Add missing module informations clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2 ...
2020-07-10soc: qcom: Separate kryo l2 accessors from PMU driverIlia Lin1-0/+4
The driver provides kernel level API for other drivers to access the MSM8996 L2 cache registers. Separating the L2 access code from the PMU driver and making it public to allow other drivers use it. The accesses must be separated with a single spinlock, maintained in this driver. Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1593766185-16346-2-git-send-email-loic.poulain@linaro.org Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-22soc: qcom: rpmh: Allow RPMH on ARM SoCLina Iyer1-1/+1
Remove config restriction for RPMH on ARM64 platforms only. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Link: https://lore.kernel.org/r/1590750158-20661-1-git-send-email-mkshah@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-08Merge tag 'rproc-v5.8' of ↵Linus Torvalds1-9/+0
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This introduces device managed versions of functions used to register remoteproc devices, add support for remoteproc driver specific resource control, enables remoteproc drivers to specify ELF class and machine for coredumps. It integrates pm_runtime in the core for keeping resources active while the remote is booted and holds a wake source while recoverying a remote processor after a firmware crash. It refactors the remoteproc device's allocation path to simplify the logic, fix a few cleanup bugs and to not clone const strings onto the heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a zero-length array is replaced with flexible-array. A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm SM8250 gains support for audio, compute and sensor remoteprocs and the Qualcomm SC7180 modem support is cleaned up and improved. The Qualcomm glink subsystem-restart driver is merged into the main glink driver, the Qualcomm sysmon driver is extended to properly notify remote processors about all other remote processors' state transitions" * tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (43 commits) remoteproc: Fix an error code in devm_rproc_alloc() MAINTAINERS: Add myself as reviewer for Ingenic rproc driver remoteproc: ingenic: Added remoteproc driver remoteproc: Add support for runtime PM dt-bindings: Document JZ47xx VPU auxiliary processor remoteproc: wcss: Fix arguments passed to qcom_add_glink_subdev() remoteproc: Fix and restore the parenting hierarchy for vdev remoteproc: Fall back to using parent memory pool if no dedicated available remoteproc: Replace zero-length array with flexible-array remoteproc: wcss: add support for rpmsg communication remoteproc: core: Prevent system suspend during remoteproc recovery remoteproc: qcom_q6v5_mss: Remove unused q6v5_da_to_va function remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space dt-bindings: remoteproc: qcom: Replace halt-nav with spare-regs remoteproc: qcom: pas: Add SM8250 PAS remoteprocs dt-bindings: remoteproc: qcom: pas: Add SM8250 remoteprocs remoteproc: qcom_q6v5_mss: Extract mba/mpss from memory-region dt-bindings: remoteproc: qcom: Use memory-region to reference memory remoteproc: qcom: pas: Add SC7180 Modem support ...
2020-06-04Merge tag 'arm-drivers-5.8' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM/SoC driver updates from Arnd Bergmann: "These are updates to SoC specific drivers that did not have another subsystem maintainer tree to go through for some reason: - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC that is getting added through the MIPS tree. - There are new soc_device identification drivers for TI K3, Qualcomm MSM8939 - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and Hisilicon hi6220 - The SCMI firmware interface can now work across ARM SMC/HVC as a transport. - Mediatek platforms now use a new driver for their "MMSYS" hardware block that controls clocks and some other aspects in behalf of the media and gpu drivers. - Some Tegra processors have improved power management support, including getting woken up by the PMIC and cluster power down during idle. - A new v4l staging driver for Tegra is added. - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and Tegra" * tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits) clk: sprd: fix compile-testing bus: bt1-axi: Build the driver into the kernel bus: bt1-apb: Build the driver into the kernel bus: bt1-axi: Use sysfs_streq instead of strncmp bus: bt1-axi: Optimize the return points in the driver bus: bt1-apb: Use sysfs_streq instead of strncmp bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method bus: bt1-apb: Fix show/store callback identations bus: bt1-apb: Include linux/io.h dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding memory: Add Baikal-T1 L2-cache Control Block driver bus: Add Baikal-T1 APB-bus driver bus: Add Baikal-T1 AXI-bus driver dt-bindings: bus: Add Baikal-T1 APB-bus binding dt-bindings: bus: Add Baikal-T1 AXI-bus binding staging: tegra-video: fix V4L2 dependency tee: fix crypto select drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static soc: ti: add k3 platforms chipid module driver dt-bindings: soc: ti: add binding for k3 platforms chipid module ...
2020-05-26cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driverStephan Gerhold1-10/+0
The Qualcomm SPM cpuidle driver seems to be the last driver still using the generic ARM CPUidle infrastructure. Converting it actually allows us to simplify the driver, and we end up being able to remove more lines than adding new ones: - We can parse the CPUidle states in the device tree directly with dt_idle_states (and don't need to duplicate that functionality into the spm driver). - Each "saw" device managed by the SPM driver now directly registers its own cpuidle driver, removing the need for any global (per cpu) state. The device tree binding is the same, so the driver stays compatible with all old device trees. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Lina Iyer <ilina@codeaurora.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-17Revert "soc: qcom: rpmh: Allow RPMH driver to be loaded as a module"Bjorn Andersson1-1/+1
Attempting to compile rpmh-rsc.c as a module with TRACING enabled causes a build error as no _rcuidle function is generated for tracepoints when CONFIG_MODULE is set. Attempts has been made, but no resolution has been agreed upon, so lets revert this commit for now. This reverts commit 1d3c6f86fd3f8b88c707f56d8c3f94e014b40e83. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-07rpmsg: glink: Integrate glink_ssr in qcom_glinkBjorn Andersson1-9/+0
In all but the very special case of a system with _only_ glink_rpm, GLINK is dependent on glink_ssr, so move it to rpmsg and combine it with qcom_glink_native in the new qcom_glink kernel module. Acked-by: Chris Lew <clew@codeaurora.org> Acked-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Link: https://lore.kernel.org/r/20200423003736.2027371-4-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-14soc: qcom: rpmpd: Allow RPMPD driver to be loaded as a moduleJohn Stultz1-2/+2
This patch allow the rpmpd driver to be loaded as a permenent module. Meaning it can be loaded from a module, but then cannot be unloaded. Ideally, it would include a remove hook and related logic, but apparently the genpd code isn't able to track usage and cleaning things up? (See: https://lkml.org/lkml/2019/1/24/38) So making it a permenent module at least improves things slightly over requiring it to be a built in driver. Cc: Todd Kjos <tkjos@google.com> Cc: Saravana Kannan <saravanak@google.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rajendra Nayak <rnayak@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Acked-by: Saravana Kannan <saravanak@google.com> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Link: https://lore.kernel.org/r/20200326224459.105170-2-john.stultz@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-14soc: qcom: rpmhpd: Allow RPMHPD driver to be loaded as a moduleJohn Stultz1-1/+1
This patch allow the rpmhpd driver to be loaded as a permenent module. Meaning it can be loaded from a module, but then cannot be unloaded. Ideally, it would include a remove hook and related logic, but apparently the genpd code isn't able to track usage and cleaning things up? So making it a permenent module at least improves things slightly over requiring it to be a built in driver. Cc: Todd Kjos <tkjos@google.com> Cc: Saravana Kannan <saravanak@google.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rajendra Nayak <rnayak@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Acked-by: Saravana Kannan <saravanak@google.com> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Link: https://lore.kernel.org/r/20200326224459.105170-4-john.stultz@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-14soc: qcom: rpmh: Allow RPMH driver to be loaded as a moduleJohn Stultz1-1/+1
This patch allow the rpmh driver to be loaded as a permenent module. Meaning it can be loaded from a module, but then cannot be unloaded. Ideally, it would include a remove hook and related logic, but the rpmh driver is fairly core to the system, so once its loaded with almost anythign else to get the system to go, the dependencies are not likely to ever also be removed. So making it a permenent module at least improves things slightly over requiring it to be a built in driver. Acked-by: Saravana Kannan <saravanak@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Saravana Kannan <saravanak@google.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rajendra Nayak <rnayak@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Link: https://lore.kernel.org/r/20200326224459.105170-3-john.stultz@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-16soc: qcom: Fix QCOM_APR dependenciesBjorn Andersson1-0/+1
QCOM_APR selects QCOM_PDR_HELPERS, which in turn selects QCOM_QMI_HELPERS, which depends on NET. So ensure that APR's dependencies are met by making it depend on NET as well. Fixes: 834735662602 ("soc: qcom: apr: Add avs/audio tracking functionality") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-14soc: qcom: apr: Add avs/audio tracking functionalitySibi Sankar1-0/+1
Use PDR helper functions to track the protection domains that the apr services are dependent upon on SDM845 SoC, specifically the "avs/audio" service running on ADSP Q6. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200312120842.21991-4-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-14soc: qcom: Introduce Protection Domain Restart helpersSibi Sankar1-0/+4
Qualcomm SoCs (starting with MSM8998) allow for multiple protection domains to run on the same Q6 sub-system. This allows for services like ATH10K WLAN FW to have their own separate address space and crash/recover without disrupting the modem and other PDs running on the same sub-system. The PDR helpers introduces an abstraction that allows for tracking/controlling the life cycle of protection domains running on various Q6 sub-systems. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200312120842.21991-2-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-03soc: qcom: Do not depend on ARCH_QCOM for QMI helpersManivannan Sadhasivam1-1/+0
QMI helpers are not always used by Qualcomm platforms. One of the exceptions is the external modems available in near future. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200220095854.4804-17-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-28soc: qcom: Fix Kconfig indentationKrzysztof Kozlowski1-15/+15
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191120133925.13712-1-krzk@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-06Merge tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+10
Pull more drm updates from Dave Airlie: "Rob pointed out I missed his pull request for msm-next, it's been in next for a while outside of my tree so shouldn't cause any unexpected issues, it has some OCMEM support in drivers/soc that is acked by other maintainers as it's outside my tree. Otherwise it's a usual fixes pull, i915, amdgpu, the main ones, with some tegra, omap, mgag200 and one core fix. Summary: msm-next: - OCMEM support for a3xx and a4xx GPUs. - a510 support + display support core: - mst payload deletion fix i915: - uapi alignment fix - fix for power usage regression due to security fixes - change default preemption timeout to 640ms from 100ms - EHL voltage level display fixes - TGL DGL PHY fix - gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning - CI spotted deadlock fix - EHL port D programming fix amdgpu: - VRAM lost fixes on BACO for CI/VI - navi14 DC fixes - misc SR-IOV, gfx10 fixes - XGMI fixes for arcturus - SRIOV fixes amdkfd: - KFD on ppc64le enabled - page table optimisations radeon: - fix for r1xx/2xx register checker. tegra: - displayport regression fixes - DMA API regression fixes mgag200: - fix devices that can't scanout except at 0 addr omap: - fix dma_addr refcounting" * tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm: (100 commits) drm/dp_mst: Correct the bug in drm_dp_update_payload_part1() drm/omap: fix dma_addr refcounting drm/tegra: Run hub cleanup on ->remove() drm/tegra: sor: Make the +5V HDMI supply optional drm/tegra: Silence expected errors on IOMMU attach drm/tegra: vic: Export module device table drm/tegra: sor: Implement system suspend/resume drm/tegra: Use proper IOVA address for cursor image drm/tegra: gem: Remove premature import restrictions drm/tegra: gem: Properly pin imported buffers drm/tegra: hub: Remove bogus connection mutex check ia64: agp: Replace empty define with do while agp: Add bridge parameter documentation agp: remove unused variable num_segments agp: move AGPGART_MINOR to include/linux/miscdevice.h agp: remove unused variable size in agp_generic_create_gatt_table drm/dp_mst: Fix build on systems with STACKTRACE_SUPPORT=n drm/radeon: fix r1xx/r2xx register checker for POT textures drm/amdgpu: fix GFX10 missing CSIB set(v3) drm/amdgpu: should stop GFX ring in hw_fini ...
2019-10-07soc: qcom: add OCMEM driverBrian Masney1-0/+10
The OCMEM driver handles allocation and configuration of the On Chip MEMory that is present on some Snapdragon SoCs. Devices which have OCMEM do not have GMEM inside the GPU core, so the GPU must instead use OCMEM to be functional. Since the GPU is currently the only OCMEM user with an upstream driver, this is just a minimal implementation sufficient for statically allocating to the GPU it's chunk of OCMEM. This driver currently does not read the gmu-sram node that is described in the device tree bindings. The starting memory address of the GPU's reserved memory region is hardcoded to zero to match what the hardware expects. The driver can be updated to read the reserved memory regions from device tree once other users of OCMEM are added upstream. Signed-off-by: Brian Masney <masneyb@onstation.org> Co-developed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Gabriel Francisco <frc.gabrielgmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-01soc: qcom: llcc cleanup to get rid of sdm845 specific driver fileVivek Gautam1-11/+3
A single file should suffice the need to program the llcc for various platforms. Get rid of sdm845 specific driver file to make way for a more generic driver. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05soc: qcom: Add socinfo driverImran Khan1-0/+8
The Qualcomm socinfo driver exposes information about the SoC, its version and its serial number to user space. Tested-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Imran Khan <kimran@codeaurora.org> [Bjorn: Extract code to platform_driver, split patch in multiple] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [Vaishali: Simplify declarations, introduce qcom_socinfo struct, Fix memory leak, Remove extra code and Misc code refactoring] Signed-off-by: Vaishali Thakkar <vaishali.thakkar@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-25Merge tag 'qcom-drivers-for-5.3' of ↵Olof Johansson1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm ARM Based Driver Updates for v5.3 * Add ACPI support to Qualcomm GENI SE * Update Qualcomm Maintainers entry to remove David Brown as maintainer and fixup typos and incorrect DT file entry * Fixup APR domain id usage and making callbacks in non-atomic context * Add AOSS QMP driver and bindings * Add power domains for MSM8998 and QCS404 in QCOM RPMPD * Add corner macros, max state support, and fixups for setting performance state for Qcom RPMPD * tag 'qcom-drivers-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: geni: Add support for ACPI MAINTAINERS: Remove myself as qcom maintainer soc: qcom: apr: Don't use reg for domain id soc: qcom: fix QCOM_AOSS_QMP dependency and build errors soc: qcom: Add AOSS QMP driver dt-bindings: soc: qcom: Add AOSS QMP binding qcom: apr: Make apr callbacks in non-atomic context soc: qcom: rpmpd: Add MSM8998 power-domains dt-bindings: power: Add rpm power domain bindings for msm8998 soc: qcom: rpmpd: Add QCS404 power-domains dt-bindings: power: Add rpm power domain bindings for qcs404 soc: qcom: rpmpd: Modify corner defining macros soc: qcom: rpmpd: Add support to set rpmpd state to max soc: qcom: rpmpd: fixup rpmpd set performance state MAINTAINER: Fix Qualcomm ETHQOS ethernet DT file MAINTAINERS: fix typo in file name Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-14soc: qcom: fix QCOM_AOSS_QMP dependency and build errorsRandy Dunlap1-1/+1
Fix Kconfig warning and subsequent build errors that are caused when PM_GENERIC_DOMAINS=y but CONFIG_PM is not set/enabled. WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS Depends on [n]: PM [=n] Selected by [m]: - QCOM_AOSS_QMP [=m] && (ARCH_QCOM || COMPILE_TEST [=y]) && MAILBOX [=y] && COMMON_CLK [=y] Fixes these build errors: ../drivers/base/power/domain.c: In function ‘genpd_queue_power_off_work’: ../drivers/base/power/domain.c:485:13: error: ‘pm_wq’ undeclared (first use in this function) queue_work(pm_wq, &genpd->power_off_work); ../drivers/base/power/domain.c:485:13: note: each undeclared identifier is reported only once for each function it appears in ../drivers/base/power/domain.c: In function ‘genpd_dev_pm_qos_notifier’: ../drivers/base/power/domain.c:675:25: error: ‘struct dev_pm_info’ has no member named ‘ignore_children’ if (!dev || dev->power.ignore_children) ../drivers/base/power/domain.c: In function ‘rtpm_status_str’: ../drivers/base/power/domain.c:2754:16: error: ‘struct dev_pm_info’ has no member named ‘runtime_error’ if (dev->power.runtime_error) ../drivers/base/power/domain.c:2756:21: error: ‘struct dev_pm_info’ has no member named ‘disable_depth’ else if (dev->power.disable_depth) ../drivers/base/power/domain.c:2758:21: error: ‘struct dev_pm_info’ has no member named ‘runtime_status’ else if (dev->power.runtime_status < ARRAY_SIZE(status_lookup)) ../drivers/base/power/domain.c:2759:31: error: ‘struct dev_pm_info’ has no member named ‘runtime_status’ p = status_lookup[dev->power.runtime_status]; ../drivers/base/power/domain_governor.c: In function ‘default_suspend_ok’: ../drivers/base/power/domain_governor.c:82:17: error: ‘struct dev_pm_info’ has no member named ‘ignore_children’ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-11soc: qcom: Add AOSS QMP driverBjorn Andersson1-0/+12
The Always On Subsystem (AOSS) Qualcomm Messaging Protocol (QMP) driver is used to communicate with the AOSS for certain side-channel requests, that are not available through the RPMh interface. The communication is a very simple synchronous mechanism of messages being written in message RAM and a doorbell in the AOSS is rung. As the AOSS has processed the message length is cleared and an interrupt is fired by the AOSS as acknowledgment. The driver exposes the QDSS clock as a clock and the low-power state associated with the remoteprocs in the system as a set of power-domains. Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22soc: qcom: update config dependencies for QCOM_RPMPDRajendra Nayak1-1/+1
Since QCOM_RPMPD is bool and it depends on QCOM_SMD_RPM which is tristate, configurations such as arm64:allmodconfig result in CONFIG_QCOM_RPMPD=y CONFIG_QCOM_SMD_RPM=m This in turn results in drivers/soc/qcom/rpmpd.o: In function `rpmpd_send_corner': rpmpd.c:(.text+0x10c): undefined reference to `qcom_rpm_smd_write' drivers/soc/qcom/rpmpd.o: In function `rpmpd_power_on': rpmpd.c:(.text+0x3b4): undefined reference to `qcom_rpm_smd_write' drivers/soc/qcom/rpmpd.o: In function `rpmpd_power_off': rpmpd.c:(.text+0x520): undefined reference to `qcom_rpm_smd_write' make: *** [vmlinux] Error 1 Fix it by making QCOM_RPMPD depend on QCOM_SMD_RPM=y Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22soc: qcom: rpmpd: Drop family A RPM dependencyBjorn Andersson1-1/+1
The MFD_QCOM_RPM is the RPM in family A, but the rpmpd driver only implements support for SMD based devices. Drop the dependency and remove includes of the family A headers. No functional change. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22soc: qcom: rpmhpd: Add RPMh power domain driverRajendra Nayak1-0/+9
The RPMh power domain driver aggregates the corner votes from various consumers for the ARC resources and communicates it to RPMh. With RPMh we use 2 different numbering space for corners, one used by the clients to express their performance needs, and another used to communicate to RPMh hardware. The clients express their performance requirements using a sparse numbering space which are mapped to meaningful levels like RET, SVS, NOMINAL, TURBO etc which then get mapped to another number space between 0 and 15 which is communicated to RPMh. The sparse number space, also referred to as vlvl is mapped to the continuous number space of 0 to 15, also referred to as hlvl, using command DB. Some power domain clients could request a performance state only while the CPU is active, while some others could request for a certain performance state all the time regardless of the state of the CPU. We handle this by internally aggregating the votes from both type of clients and then send the aggregated votes to RPMh. There are also 3 different types of votes that are comunicated to RPMh for every resource. 1. ACTIVE_ONLY: This specifies the requirement for the resource when the CPU is active 2. SLEEP: This specifies the requirement for the resource when the CPU is going to sleep 3. WAKE_ONLY: This specifies the requirement for the resource when the CPU is coming out of sleep to active state We add data for all power domains on sdm845 SoC as part of the patch. The driver can be extended to support other SoCs which support RPMh Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22soc: qcom: rpmpd: Add a Power domain driver to model cornersRajendra Nayak1-0/+9
The Power domains for corners just pass the performance state set by the consumers to the RPM (Remote Power manager) which then takes care of setting the appropriate voltage on the corresponding rails to meet the performance needs. We add all power domain data needed on msm8996 here. This driver can easily be extended by adding data for other qualcomm SoCs as well. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14soc: qcom: Drop help text for QCOM_QMI_HELPERSNiklas Cassel1-5/+0
The help text is visible in menuconfig, however QCOM_QMI_HELPERS is a hidden kconfig, so it is not selectable in menuconfig. Remove the help text so that it is more clear that this is intentionally a hidden kconfig. Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-09-13soc: qcom: Allow COMPILE_TEST of qcom SoC KconfigsNiklas Cassel1-7/+8
Since commit cab673583d96 ("soc: Unconditionally include qcom Makefile"), we unconditionally include the soc/qcom/Makefile. This opens up the possibility to compile test the code even when building for other architectures. Allow COMPILE_TEST for all qcom SoC Kconfigs, except for two Kconfigs that depend on QCOM_SCM, since that triggers lots of build errors in qcom_scm. Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-09-13soc: qcom: Remove depends on OF from QCOM_RPMHNiklas Cassel1-1/+1
QCOM_RPHM already selects ARM64, which always selects OF. Additionally, the rpmh driver only uses linux/of.h, which has dummy definitions for all functions, in order for code to to be able to build without CONFIG_OF set. Remove the superfluous depends on OF. Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-09-13soc: qcom: Remove bogus depends on OF from QCOM_SMD_RPMNiklas Cassel1-1/+1
QCOM_SMD_RPM builds perfectly fine without CONFIG_OF set. Remove the bogus depends on OF. Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-09-13soc: qcom: smsm: Add select IRQ_DOMAINNiklas Cassel1-0/+1
Since we are using irq_domain_add_linear(), add a select on IRQ_DOMAIN. This is needed in order to be able to remove the depends on ARCH_QCOM. drivers/soc/qcom/smsm.c: In function ‘smsm_inbound_entry’: drivers/soc/qcom/smsm.c:411:18: error: implicit declaration of function ‘irq_domain_add_linear’ entry->domain = irq_domain_add_linear(node, 32, &smsm_irq_ops, entry); ^~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-09-13soc: qcom: smp2p: Add select IRQ_DOMAINNiklas Cassel1-0/+1
Since we are using irq_domain_add_linear(), add a select on IRQ_DOMAIN. This is needed in order to be able to remove the depends on ARCH_QCOM. drivers/soc/qcom/smp2p.c: In function ‘qcom_smp2p_inbound_entry’: drivers/soc/qcom/smp2p.c:317:18: error: implicit declaration of function ‘irq_domain_add_linear’ entry->domain = irq_domain_add_linear(node, 32, &smp2p_irq_ops, entry); ^~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-08-10Merge branch 'regulator-4.19' into regulator-nextMark Brown1-0/+27
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-30 03:24:25 +0000