summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc/lpfc_hbadisc.c
AgeCommit message (Collapse)AuthorFilesLines
2022-11-17scsi: lpfc: Fix crash involving race between FLOGI timeout and devloss handlerJustin Tee1-10/+26
When a FLOGI completes with a sequence timeout error, a freed kref ptr dereference crash can occur due to a timing race involving ndlp referencing in lpfc_dev_loss_tmo_callbk. Fix by ensuring the driver accounts for an outstanding FLOGI when dev_loss is active. Also, don't remove the HBA_FLOGI_OUTSTANDING flag when the FLOGI is retried to allow the driver to handle the reference counts correctly in lpfc_dev_loss_tmo_handler. Reported-by: Dietmar Hahn <dietmar.hahn@fujitsu.com> Tested-by: Dietmar Hahn <dietmar.hahn@fujitsu.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20221116011921.105995-5-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-10-11treewide: use get_random_{u8,u16}() when possible, part 1Jason A. Donenfeld1-3/+3
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done mechanically with this coccinelle script: @@ expression E; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; typedef __be16; typedef __le16; typedef u8; @@ ( - (get_random_u32() & 0xffff) + get_random_u16() | - (get_random_u32() & 0xff) + get_random_u8() | - (get_random_u32() % 65536) + get_random_u16() | - (get_random_u32() % 256) + get_random_u8() | - (get_random_u32() >> 16) + get_random_u16() | - (get_random_u32() >> 24) + get_random_u8() | - (u16)get_random_u32() + get_random_u16() | - (u8)get_random_u32() + get_random_u8() | - (__be16)get_random_u32() + (__be16)get_random_u16() | - (__le16)get_random_u32() + (__le16)get_random_u16() | - prandom_u32_max(65536) + get_random_u16() | - prandom_u32_max(256) + get_random_u8() | - E->inet_id = get_random_u32() + E->inet_id = get_random_u16() ) @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; identifier v; @@ - u16 v = get_random_u32(); + u16 v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; identifier v; @@ - u8 v = get_random_u32(); + u8 v = get_random_u8(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; u16 v; @@ - v = get_random_u32(); + v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; u8 v; @@ - v = get_random_u32(); + v = get_random_u8(); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Examine limits @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value < 256: coccinelle.RESULT = cocci.make_ident("get_random_u8") elif value < 65536: coccinelle.RESULT = cocci.make_ident("get_random_u16") else: print("Skipping large mask of %s" % (literal)) cocci.include_match(False) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; identifier add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + (RESULT() & LITERAL) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-09-15scsi: lpfc: Fix various issues reported by toolsJames Smart1-2/+2
This patch fixes below Smatch reported issues: 1. lpfc_hbadisc.c:3020 lpfc_mbx_cmpl_fcf_rr_read_fcf_rec() error: uninitialized symbol 'vlan_id'. 2. lpfc_hbadisc.c:3121 lpfc_mbx_cmpl_read_fcf_rec() error: uninitialized symbol 'vlan_id'. 3. lpfc_init.c:335 lpfc_dump_wakeup_param_cmpl() warn: always true condition '(prg->dist < 4) => (0-3 < 4)' 4. lpfc_init.c:2419 lpfc_parse_vpd() warn: inconsistent indenting. 5. lpfc_init.c:13248 lpfc_sli4_enable_msi() warn: 'phba->pcidev->irq' 2147483648 can't fit into 65535 'eqhdl->irq' 6. lpfc_debugfs.c:5300 lpfc_idiag_extacc_avail_get() error: uninitialized symbol 'ext_cnt' 7. lpfc_debugfs.c:5300 lpfc_idiag_extacc_avail_get() error: uninitialized symbol 'ext_size' 8. lpfc_vmid.c:248 lpfc_vmid_get_appid() warn: sleeping in atomic context. 9. lpfc_init.c:8342 lpfc_sli4_driver_resource_setup() warn: missing error code 'rc'. 10. lpfc_init.c:13573 lpfc_sli4_hba_unset() warn: variable dereferenced before check 'phba->pport' (see line 13546) 11. lpfc_auth.c:1923 lpfc_auth_handle_dhchap_reply() error: double free of 'hash_value' Fixes: 1. Initialize vlan_id to LPFC_FCOE_NULL_VID. 2. Initialize vlan_id to LPFC_FCOE_NULL_VID. 3. prg->dist is a 2 bit field. Its value can only be between 0-3. Remove redundent check 'if (prg->dist < 4)'. 4. Fix inconsistent indenting. Moved logic into helper function lpfc_fill_vpd(). 5. Define 'eqhdl->irq' as int value as pci_irq_vector() returns int. Also, check for return value of pci_irq_vector() and log message in case of failure. 6. Initialize 'ext_cnt' to 0. 7. Initialize 'ext_size' to 0. 8. Use alloc_percpu_gfp() with GFP_ATOMIC flag. 9. 'rc' was not updated when dma_pool_create() fails. Update 'rc = -ENOMEM' when dma_pool_create() fails before calling goto statement. 10. Add check for 'phba->pport' in lpfc_cpuhp_remove(). 11. Initialize 'hash_value' to NULL, same like 'aug_chal' variable. Link: https://lore.kernel.org/r/20220911221505.117655-13-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-15scsi: lpfc: Add reporting capability for Link Degrade SignalingJames Smart1-1/+9
Firmware reports link degrade signaling via ACQES. Handlers and new additions to the SET_FEATURES mbox command are implemented so that link degrade parameters for 64GB capable links are reported through EDC ELS frames. Link: https://lore.kernel.org/r/20220911221505.117655-12-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-15scsi: lpfc: Fix FLOGI ACC with wrong SID in PT2PT topologyJames Smart1-2/+7
When a FLOGI is received before we have issued our FLOGI, the ACC response to the received FLOGI is issued with SID 2 instead of the expected fabric controller SID. Certain target vendors ignore the malformed ACC with SID 2 and wait for a properly filled ACC with a fabric controller SID. The lpfc_sli_prep_wqe() routine depends on the FC_PT2PT flag to fill in the fabric controller SID when in PT2PT mode, but due to a previous commit the flag was getting cleared. Fix by adding a check for the defer_flogi_acc flag to know whether or not to clear the FC_PT2PT flag on link up. Link: https://lore.kernel.org/r/20220911221505.117655-3-jsmart2021@gmail.com Fixes: 439b93293ff2 ("scsi: lpfc: Fix unsolicited FLOGI receive handling during PT2PT discovery") Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-31scsi: lpfc: Remove SANDiags related codeJames Smart1-17/+0
The SANDiags feature is unused, and related code is removed. Link: https://lore.kernel.org/r/20220819011736.14141-6-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-31scsi: lpfc: Fix unsolicited FLOGI receive handling during PT2PT discoveryJames Smart1-1/+0
During a stress offline/online test in PT2PT topology, target rediscovery can fail with a specific target vendor array. When the HBA transitions to online mode it is possible to receive an unsolicited FLOGI before processing the Link Up event. The received FLOGI will set the defer_flogi_acc_flag, which instructs the driver to wait until it transmits its own FLOGI before ACKing the received FLOGI. In this failure scenario, the link up processing clears the set defer_flogi_acc_flag before we have sent out the FLOGI. As the target has the higher WWPN and is responsible for sending the PLOGI, the target is stuck waiting for its FLOGI_ACC that the driver will never send. Remove the clear of defer_flogi_acc_flag from Link Up event processing. In this stress test case, the defer_flogi_acc_flag is cleared during the Link Down event processing anyways. Link: https://lore.kernel.org/r/20220819011736.14141-2-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: lpfc: Remove Menlo/Hornet related codeJames Smart1-51/+6
The Menlo/Hornet adapter was never released to the field. As such, driver code specific to the adapter is unnecessary and should be removed. Link: https://lore.kernel.org/r/20220701211425.2708-11-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: lpfc: Revert RSCN_MEMENTO workaround for misbehaved configurationJames Smart1-2/+1
The RSCN_MEMENTO logic was to workaround a target that does not register both FCP and NVMe FC4 types at the same time. This caused the configuration to not produce a second RSCN for the NVMe FC4 type registration in a timely manner. The intention of the RSCN_MEMENTO flag was to always signal to try NVMe PRLI. However, there are other FCP-only target arrays in correctly behaved configurations that reject the NVMe PRLI followed by a LOGO leading to never rediscovering the target after an issue_lip (as LOGO causes a repeat of PLOGI/PRLIs). Revert the RSCN_MEMENTO patch as it is causing correctly behaved configs to fail while it exists only to succeed on a misbehaved config. Link: https://lore.kernel.org/r/20220701211425.2708-9-jsmart2021@gmail.com Fixes: 1045592fc968 ("scsi: lpfc: Introduce FC_RSCN_MEMENTO flag for tracking post RSCN completion") Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-10scsi: lpfc: Rework FDMI initialization after link upJames Smart1-2/+3
After a link up, it's possible for the switch to change FDMI support (e.g. FDMI1 vs FDMI2 vs SmartSAN). If the switch reverts to FDMI1, then the revert is currently not detected. Additionally, when NPIV is configured, it's possible the physical port's RHBA is unprocessed by the switch before reciept of an NPIV port issued RPRT. This causes some switches vendors to reject the NPIV's RPRT. Fix by reinitializing base FDMI mode on link up, and defer FDMI vport RPRT submission until after confirming physical port's RHBA is completed. Link: https://lore.kernel.org/r/20220506035519.50908-10-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-10scsi: lpfc: Decrement outstanding gidft_inp counter if lpfc_err_lost_link()James Smart1-2/+3
During large NPIV port testing, it was sometimes seen that not all vports would log back in to the target device. There are instances when the fabric is slow to respond to a spam of GID_PT requests and as a result the SLI PORT may abort the GID_PT request because the fabric takes so long. lpfc_cmpl_ct_cmd_gid_pt() would enter the lpfc_err_lost_link() logic and attempt to lpfc_els_flush_rscn(), which is fine, but forgets to decrement the gidft_inp counter. This results in a vport->gidft_inp never reaching 0 and never restarting discovery again. Decrement vport->gidft_inp if lpfc_err_lost_link() is true for both lpfc_cmpl_ct_cmd_gid_pt() and lpfc_cmpl_ct_cmd_gid_ft(). Increase logging info during RSCN timeout and lpfc_err_lost_link() events. Link: https://lore.kernel.org/r/20220506035519.50908-8-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-10scsi: lpfc: Inhibit aborts if external loopback plug is insertedJames Smart1-0/+3
After running a short external loopback test, when the external loopback is removed and a normal cable inserted that is directly connected to a target device, the system oops in the llpfc_set_rrq_active() routine. When the loopback was inserted an FLOGI was transmit. As we're looped back, we receive the FLOGI request. The FLOGI is ABTS'd as we recognize the same wppn thus understand it's a loopback. However, as the ABTS sends address information the port is not set to (fffffe), the ABTS is dropped on the wire. A short 1 frame loopback test is run and completes before the ABTS times out. The looback is unplugged and the new cable plugged in, and the an FLOGI to the new device occurs and completes. Due to a mixup in ref counting the completion of the new FLOGI releases the fabric ndlp. Then the original ABTS completes and references the released ndlp generating the oops. Correct by no-op'ing the ABTS when in loopback mode (it will be dropped anyway). Added a flag to track the mode to recognize when it should be no-op'd. Link: https://lore.kernel.org/r/20220506035519.50908-5-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-10scsi: lpfc: Fix ndlp put following a LOGO completionJames Smart1-1/+7
During testing with repeated asynchronous resets of the target, an issue was found when the driver issues a LOGO to disconnect its login and recover all exchanges. The LOGO command takes a node reference but neglects to remove it, keeping the node reference count artifically high. Add a call to lpfc_nlp_put() to lpfc_nlp_logo_unreg() and move the mempool free call to the routine exit along with the needed put. This is always safe as this will not be the last reference removed as lpfc_unreg_rpi() ensures there is an additional reference on the ndlp. Link: https://lore.kernel.org/r/20220506035519.50908-4-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-18scsi: lpfc: Change FA-PWWN detection methodologyJames Smart1-0/+8
Do not rely on vendor version field of the CSPs to determine if we are in a FA-PWWN environment. Instead, use the following procedure: First, during HBA initialization, driver does a READ_CONFIG to determine if FA-PWWN is configured on the HBA. A LPFC_FAWWPN_CONFIG hba_flag is set accordingly. Next, when the link comes up before the driver gets a link up event, the firmware logs into the fabric with FA-PWWN. If the fabric port does not support FA-PWWN, the driver will get a Misconfigured FA-WWN async event before the link up. A LPFC_FAWWPN_FABRIC hba_flag will be set accordingly. Finally, if the fabric supports FA-PWWN, the firmware will replace its CSPs WWN with the Fabric Assigned ones. Then after link up, the driver will retrieve the Fabric Assigned WWN when it does a READ_SPARAM mbox command. Link: https://lore.kernel.org/r/20220412222008.126521-23-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-18scsi: lpfc: Refactor cleanup of mailbox commandsJames Smart1-91/+33
The intention of this patch is to refactor mailbox memory allocation and cleanup steps in one routine respectively to prevent memory leaks or memory errors related to mailbox commands. There are trivial localized fixes as well. Provide lpfc_mbox_rsrc_prep() - this routine allocates the dmabuf and the mbuf associated with it. It also catches allocation errors and returns status. Provide lpfc_mbox_rsrc_cleanup() - this routine verifies a dmabuf exists and if so releases the associated mbuf and the dmabuf memory. It then sets the ctx_buf to NULL and releases the mailbox memory to the mailbox pool. Link: https://lore.kernel.org/r/20220412222008.126521-22-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-18scsi: lpfc: Fix field overload in lpfc_iocbq data structureJames Smart1-4/+4
The lpfc_iocbq data structure has void * pointers that are overloaded to be as many as 8 different data types and the driver translates the void * by casting. This patch removes the void * pointers by declaring the specific types needed by the driver. It also expands the context_un to include more seldom used pointer types to save structure bytes. It also groups the u8 types together to pack the 8 bytes needed. This work allows the lpfc_iocbq data structure to be more strongly typed and keeps it from being allocated from the 512 byte slab. [mkp: rolled in zeroday fix] Link: https://lore.kernel.org/r/20220412222008.126521-21-jsmart2021@gmail.com Reported-by: kernel test robot <lkp@intel.com> Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-18scsi: lpfc: Introduce FC_RSCN_MEMENTO flag for tracking post RSCN completionJames Smart1-1/+2
During an NVMe target reboot, the target may initialize itself as FCP only during the first RSCN and shortly after trigger a second RSCN claiming NVMe support. The timing of these RSCNs occur before FCP-PRLI for the first RSCN completes leading discovery issues over NVMe. Change RSCN and NVME-PRLI send logic based on a new FC_RSCN_MEMENTO flag that signals when lpfc_end_rscn() is completed and serves as a memento that discovery was started from RSCN. Link: https://lore.kernel.org/r/20220412222008.126521-20-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: lpfc: Fix unload hang after back to back PCI EEH faultsJames Smart1-0/+1
When injecting EEH errors the port is getting hung up waiting on the node list to empty, message number 0233. The driver is stuck at this point and also can't unload. The driver makes transport remoteport delete calls which try to abort I/O's, but the EEH daemon has already called the driver to detach and the detachment has set the global FC_UNLOADING flag. There are several code paths that will avoid I/O cleanup if the FC_UNLOADING flag is set, resulting in transports waiting for I/O while the driver is waiting on transports to clean up. Additionally, during study of the list, a locking issue was found in lpfc_sli_abort_iocb_ring that could corrupt the list. A special case was added to the lpfc_cleanup() routine to call lpfc_sli_flush_rings() if the driver is FC_UNLOADING and if the pci-slot is offline (e.g. EEH). The SLI4 part of lpfc_sli_abort_iocb_ring() is changed to use the ring_lock. Also added code to cancel the I/Os if the pci-slot is offline and added checks and returns for the FC_UNLOADING and HBA_IOQ_FLUSH flags to prevent trying to send an I/O that we cannot handle. Link: https://lore.kernel.org/r/20220317032737.45308-3-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: lpfc: Improve PCI EEH Error and Recovery HandlingJames Smart1-23/+96
Following EEH errors, the driver can crash or hang when deleting the localport or when attempting to unload. The EEH handlers in the driver did not notify the NVMe-FC transport before tearing the driver down. This was delayed until the resume steps. This worked for SCSI because lpfc_block_scsi() would notify the scsi_fc_transport that the target was not available but it would not clean up all the references to the ndlp. The SLI3 prep for dev reset handler did the lpfc_offline_prep() and lpfc_offline() calls to get the port stopped before restarting. The SLI4 version of the prep for dev reset just destroyed the queues and did not stop NVMe from continuing. Also because the port was not really stopped the localport destroy would hang because the transport was still waiting for I/O. Additionally, a devloss tmo can fire and post events to a stopped worker thread creating another hang condition. lpfc_sli4_prep_dev_for_reset() is modified to call lpfc_offline_prep() and lpfc_offline() rather than just lpfc_scsi_dev_block() to ensure both SCSI and NVMe transports are notified to block I/O to the driver. Logic is added to devloss handler and worker thread to clean up ndlp references and quiesce appropriately. Link: https://lore.kernel.org/r/20220317032737.45308-2-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: lpfc: Copyright updates for 14.2.0.0 patchesJames Smart1-1/+1
Update copyrights to 2022 for files modified in the 14.2.0.0 patch set. Link: https://lore.kernel.org/r/20220225022308.16486-18-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: lpfc: SLI path split: Refactor misc ELS pathsJames Smart1-18/+26
This patch refactors the remaining ELS paths to use SLI-4 as the primary interface. Paths include RRQ, RSCN, unsolicited ELS RQST and RSP paths, ELS timeouts, etc.: - Remove unused routines lpfc_sli4_bpl2sgl and lpfc_sli4_iocb2wqe - Conversion away from using SLI-3 iocb structures to set/access fields in common routines. Use the new generic get/set routines that were added. This move changes code from indirect structure references to using local variables with the generic routines. - Refactor routines when setting non-generic fields, to have both SLI3 and SLI4 specific sections. This replaces the set-as-SLI3 then translate to SLI4 behavior of the past. Link: https://lore.kernel.org/r/20220225022308.16486-12-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06scsi: lpfc: Trigger SLI4 firmware dump before doing driver cleanupJames Smart1-1/+7
Extraneous teardown routines are present in the firmware dump path causing altered states in firmware captures. When a firmware dump is requested via sysfs, trigger the dump immediately without tearing down structures and changing adapter state. The driver shall rely on pre-existing firmware error state clean up handlers to restore the adapter. Link: https://lore.kernel.org/r/20211204002644.116455-6-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06scsi: lpfc: Fix NPIV port deletion crashJames Smart1-2/+0
The driver is calling schedule_timeout after the DA_ID nameserver request and LOGO commands are issued to the fabric by the initiator virtual endport. These fixed delay functions are causing long delays in the driver's worker thread when processing discovery I/Os in a serialized fashion, which is then triggering mailbox timeout errors artificially. To fix this, don't wait on the DA_ID request to complete and call wait_event_timeout to allow the vport delete thread to make progress on an event driven basis rather than fixing the wait time. Link: https://lore.kernel.org/r/20211204002644.116455-5-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-20scsi: lpfc: Allow fabric node recovery if recovery is in progress before devlossJames Smart1-2/+109
A link bounce to a slow fabric may observe FDISC response delays lasting longer than devloss tmo. Current logic decrements the final fabric node kref during a devloss tmo event. This results in a NULL ptr dereference crash if the FDISC completes for that fabric node after devloss tmo. Fix by adding the NLP_IN_RECOV_POST_DEV_LOSS flag, which is set when devloss tmo triggers and we've noticed that fabric node recovery has already started or finished in between the time lpfc_dev_loss_tmo_callbk queues lpfc_dev_loss_tmo_handler. If fabric node recovery succeeds, then the driver reverses the devloss tmo marked kref put with a kref get. If fabric node recovery fails, then the final kref put relies on the ELS timing out or the REG_LOGIN cmpl routine. Link: https://lore.kernel.org/r/20211020211417.88754-8-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-20scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routineJames Smart1-0/+1
An error is detected with the following report when unloading the driver: "KASAN: use-after-free in lpfc_unreg_rpi+0x1b1b" The NLP_REG_LOGIN_SEND nlp_flag is set in lpfc_reg_fab_ctrl_node(), but the flag is not cleared upon completion of the login. This allows a second call to lpfc_unreg_rpi() to proceed with nlp_rpi set to LPFC_RPI_ALLOW_ERROR. This results in a use after free access when used as an rpi_ids array index. Fix by clearing the NLP_REG_LOGIN_SEND nlp_flag in lpfc_mbx_cmpl_fc_reg_login(). Link: https://lore.kernel.org/r/20211020211417.88754-5-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14scsi: lpfc: Fix EEH support for NVMe I/OJames Smart1-0/+1
Injecting errors on the PCI slot while the driver is handling NVMe I/O will cause crashes and hangs. There are several rather difficult scenarios occurring. The main issue is that the adapter can report a PCI error before or simultaneously to the PCI subsystem reporting the error. Both paths have different entry points and currently there is no interlock between them. Thus multiple teardown paths are competing and all heck breaks loose. Complicating things is the NVMs path. To a large degree, I/O was able to be shutdown for a full FC port on the SCSI stack. But on NVMe, there isn't a similar call. At best, it works on a per-controller basis, but even at the controller level, it's a controller "reset" call. All of which means I/O is still flowing on different CPUs with reset paths expecting hw access (mailbox commands) to execute properly. The following modifications are made: - A new flag is set in PCI error entrypoints so the driver can track being called by that path. - An interlock is added in the SLI hw error path and the PCI error path such that only one of the paths proceeds with the teardown logic. - RPI cleanup is patched such that RPIs are marked unregistered w/o mbx cmds in cases of hw error. - If entering the SLI port re-init calls, a case where SLI error teardown was quick and beat the PCI calls now reporting error, check whether the SLI port is still live on the PCI bus. - In the PCI reset code to bring the adapter back, recheck the IRQ settings. Different checks for SLI3 vs SLI4. - In I/O completions, that may be called as part of the cleanup or underway just before the hw error, check the state of the adapter. If in error, shortcut handling that would expect further adapter completions as the hw error won't be sending them. - In routines waiting on I/O completions, which may have been in progress prior to the hw error, detect the device is being torn down and abort from their waits and just give up. This points to a larger issue in the driver on ref-counting for data structures, as it doesn't have ref-counting on q and port structures. We'll do this fix for now as it would be a major rework to be done differently. - Fix the NVMe cleanup to simulate NVMe I/O completions if I/O is being failed back due to hw error. - In I/O buf allocation, done at the start of new I/Os, check hw state and fail if hw error. Link: https://lore.kernel.org/r/20210910233159.115896-10-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14scsi: lpfc: Fix rediscovery of tape device after LIPJames Smart1-2/+5
On link up and node discovery, a remote port is registered with the SCSI transport and the driver sets fc4_xpt_flags to track transport registration. A link down event causes the driver to deregister with the SCSI transport, starting the devloss timer, and calls a local unreg routine to clear the login state. Part of the login state is the fc4_xpt_flags. However, with tape devices that support sequence level error recovery, which wants to preserve the login, the local unreg routine is skipped, thus the flags aren't cleared. A subsequent link up, ADISC is performed and the lpfc_nlp_reg_node() routine is called. As the fc4_xpt_flags is not clear, it's believed the node is already registered with the transport. Unfortunately, the registration was already terminated. Eventually the devloss tmo timer expires and tears down the device. Fix by ensuring the tape device, known by the ADISC flag, is always unregistered if the link drops. Link: https://lore.kernel.org/r/20210910233159.115896-6-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14scsi: lpfc: Fix hang on unload due to stuck fport nodeJames Smart1-1/+13
A test scenario encountered an unload hang while an FLOGI ELS was in flight when a link down condition occurred. The driver fails unload as it never releases the fport node. For most nodes, when the link drops, devloss tmo is started and the timeout will cause the final node release. For the Fport, as it has not yet registered with the SCSI transport, there is no devloss timer to be started, so there is no final release. Additionally, the link down sequence causes ABORTS to be issued for pending ELS's. The completions from the ABORTS perform the release of node references. However, as the adapter is being reset to be unloaded, those completions will never occur. Fix by the following: - In the ELS cleanup, recognize when unloading and place the ELS's on a different list that immediately cleans up/completes the ELS's. It's recognized that this condition primarily affects only the fport, with other ports having normal clean up logic that handles things. - Resolve the devloss issue by, when cleaning up nodes on after link down, recognizing when the fabric node does not have a completed state (its state is UNUSED) and removing a reference so the node can delete after the ELS reference is released. Link: https://lore.kernel.org/r/20210910233159.115896-5-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14scsi: lpfc: Don't release final kref on Fport node while ABTS outstandingJames Smart1-4/+6
In a rarely executed path, FLOGI failure, there is a refcounting error. If FLOGI completed with an error, typically a timeout, the initial completion handler would remove the job reference. However, the job completion isn't the actual end of the job/exchange as the timeout usually initiates an ABTS, and upon that ABTS completion, a final completion is sent. The driver removes the reference again in the final completion. Thus the imbalance. In the buggy cases, if there was a link bounce while the delayed response is outstanding, the fport node may be referenced again but there was no additional reference as it is already present. The delayed completion then occurs and removes the last reference freeing the node and causing issues in the link up processed that is using the node. Fix this scenario by removing the snippet that removed the reference in the initial FLOGI completion. The bad snippet was poorly trying to identify the FLOGI as OK to do so by realizing the node was not registered with either SCSI or NVMe transport. Link: https://lore.kernel.org/r/20210910233159.115896-3-jsmart2021@gmail.com Fixes: 618e2ee146d4 ("scsi: lpfc: Fix FLOGI failure due to accessing a freed node") Cc: <stable@vger.kernel.org> # v5.13+ Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: lpfc: Add support for the CM frameworkJames Smart1-0/+4
Complete the enablement of the cm framework feature in the adapter. Perform the following: - Detect the presence of the congestion management framework feature. When the cm framework is present: - Issue the SET_FEATURE command to enable the feature. - Register the cm statistics buffer with the adapter. - Read the cm enablement buffer to determine the cm framework state for cm management. When cm management is enabled: - Monitor all FPIN and congestion signalling events, incrementing counters. - Regularly sync with the adapter to communicate congestion events and to receive an rx request limit. - Monitor requests for rx data and ensure that no more than the adapter prescribed limit is issued on the link. If the limit is exceeded, SCSI and/or NVMe traffic is temporarily suspended. - Maintain the minute, hourly, daily statistics buffer. - Monitor for congestion enablement change events, causing a reread of the enablement buffer and acting on any change in enablement. And: - Add teardown logic, including buffer deregistration, on adapter detachment or reset. Link: https://lore.kernel.org/r/20210816162901.121235-10-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: lpfc: Add EDC ELS supportJames Smart1-2/+17
When congestion management is enabled, issue EDC ELS to register congestion signaling capabilities with the fabric. The response handling will process the fabric parameters and set the reporting parameters. Similarly, add support for receiving an EDC request from the fabric generating a corresponding response. Implement handlers for congestion signals from the fabric and maintain statistics for them. Link: https://lore.kernel.org/r/20210816162901.121235-6-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: lpfc: Add 256 Gb link speed supportJames Smart1-0/+1
Update routines to support 256 Gb link speed for LPe37000/LPe38000 adapters. 256 Gb speeds can be seen on trunk links. Link: https://lore.kernel.org/r/20210722221721.74388-5-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-18scsi: lpfc: Delay unregistering from transport until GIDFT or ADISC completesJames Smart1-49/+148
On an RSCN event, the nodes specified in RSCN payload and in MAPPED state are moved to NPR state in order to revalidate the login. This triggers an immediate unregister from SCSI/NVMe backend. The assumption is that the node may be missing. The re-registration with the backend happens after either relogin (PLOGI/PRLI; if ADISC is disabled or login truly lost) or when ADISC completes successfully (rediscover with ADISC enabled). However, the NVMe-FC standard provides for an RSCN to be triggered when the remote port supports a discovery controller and there was a change of discovery log content. As the remote port typically also supports storage subsystems, this unregister causes all storage controller connections to fail and require reconnect. Correct by reworking the code to ensure that the unregistration only occurs when a login state is truly terminated, thereby leaving the NVMe storage controllers in place. The changes made are: - Retain node state in ADISC_ISSUE when scheduling ADISC ELS retry. - Do not clear wwpn/wwnn values upon ADISC failure. - Move MAPPED nodes to NPR during RSCN processing, but do not unregister with transport. On GIDFT completion, identify missing nodes (not marked NLP_NPR_2B_DISC) and unregister them. - Perform unregistration for nodes that will go through ADISC processing if ADISC completion fails. - Successful ADISC completion will move node back to MAPPED state. Link: https://lore.kernel.org/r/20210707184351.67872-16-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-10scsi: lpfc: vmid: Add QFPA and VMID timeout check in worker threadGaurav Srivastava1-0/+43
Add a periodic check for issuing of QFPA command and VMID timeout in the worker thread. The inactivity timeout check is added via the timer function. Link: https://lore.kernel.org/r/20210608043556.274139-13-muneendra.kumar@broadcom.com Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-10scsi: lpfc: vmid: Timeout implementation for VMIDGaurav Srivastava1-0/+105
Implement timeout functionality for the VMID. After the set time period of inactivity, the VMID is deregistered from the switch. Link: https://lore.kernel.org/r/20210608043556.274139-12-muneendra.kumar@broadcom.com Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-21scsi: lpfc: Fix node handling for Fabric Controller and Domain ControllerJames Smart1-4/+50
During link bounce testing, RPI counts were seen to differ from the number of nodes. For fabric and domain controllers, a temporary RPI is assigned, but the code isn't registering it. If the nodes do go away, such as on link down, the temporary RPI isn't being released. Change the way these two fabric services are managed, make them behave like any other remote port. Register the RPI and register with the transport. Never leave the nodes in a NPR or UNUSED state where their RPI is in limbo. This allows them to follow normal dev_loss_tmo handling, RPI refcounting, and normal removal rules. It also allows fabric I/Os to use the RPI for traffic requests. Note: There is some logic that still has a couple of exceptions when the Domain controller (0xfffcXX). There are cases where the fabric won't have a valid login but will send RDP. Other times, it will it send a LOGO then an RDP. It makes for ad-hoc behavior to manage the node. Exceptions are documented in the code. Link: https://lore.kernel.org/r/20210514195559.119853-7-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-21scsi: lpfc: Fix unreleased RPIs when NPIV ports are createdJames Smart1-2/+25
While testing NPIV and watching logins and used RPI levels, it was seen the used RPI count was much higher than the number of remote ports discovered. Code inspection showed that remote port removals on any NPIV instance are releasing the RPI, but not performing an UNREG_RPI with the adapter thus the reference counting never fully drops and the RPI is never fully released. This was happening on NPIV nodes due to a log of fabric ELS's to fabric addresses. This lack of UNREG_RPI was introduced by a prior node rework patch that performed the UNREG_RPI as part of node cleanup. To resolve the issue, do the following: - Restore the RPI release code, but move the location to so that it is in line with the new node cleanup design. - NPIV ports now release the RPI and drop the node when the caller sets the NLP_RELEASE_RPI flag. - Set the NLP_RELEASE_RPI flag in node cleanup which will trigger a release of RPI to free pool. - Ensure there's an UNREG_RPI at LOGO completion so that RPI release is completed. - Stop offline_prep from skipping nodes that are UNUSED. The RPI may not have been released. - Stop the default RPI handling in lpfc_cmpl_els_rsp() for SLI4. - Fixed up debugfs RPI displays for better debugging. Fixes: a70e63eee1c1 ("scsi: lpfc: Fix NPIV Fabric Node reference counting") Link: https://lore.kernel.org/r/20210514195559.119853-2-jsmart2021@gmail.com Cc: <stable@vger.kernel.org> # v5.11+ Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: lpfc: Standardize discovery object logging formatJames Smart1-5/+5
Code inspection showed lpfc was using three different pointer formats when logging discovery object pointers. Standardize the pointer format to x%px. Note: %px use is limited to discovery objects in order to aid core analysis. Link: https://lore.kernel.org/r/20210412013127.2387-14-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: lpfc: Fix missing FDMI registrations after Mgmt Svc loginJames Smart1-2/+4
FDMI registration needs to be performed after every login with the FC Mgmt service. The flag the driver is using to track registration is cleared on link up, but never on Mgmt service logout/re-login. Fix by clearing the flag whenever a new login is completed with the FC Mgmt service. While perusing the flag use, logging was performed as if FDMI registration occurred on vports. However, it is limited to the physical port only. Revise the logging to reflect physical port based. Link: https://lore.kernel.org/r/20210412013127.2387-10-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: lpfc: Fix rmmod crash due to bad ring pointers to abort_iotagJames Smart1-7/+3
Rmmod on SLI-4 adapters is sometimes hitting a bad ptr dereference in lpfc_els_free_iocb(). A prior patch refactored the lpfc_sli_abort_iocb() routine. One of the changes was to convert from building/sending an abort within the routine to using a common routine. The reworked routine passes, without modification, the pring ptr to the new common routine. The older routine had logic to check SLI-3 vs SLI-4 and adapt the pring ptr if necessary as callers were passing SLI-3 pointers even when not on an SLI-4 adapter. The new routine is missing this check and adapt, so the SLI-3 ring pointers are being used in SLI-4 paths. Fix by cleaning up the calling routines. In review, there is no need to pass the ring ptr argument to abort_iocb at all. The routine can look at the adapter type itself and reference the proper ring. Link: https://lore.kernel.org/r/20210412013127.2387-2-jsmart2021@gmail.com Fixes: db7531d2b377 ("scsi: lpfc: Convert abort handling to SLI-3 and SLI-4 handlers") Cc: <stable@vger.kernel.org> # v5.11+ Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15scsi: lpfc: Fix incorrect naming of __lpfc_update_fcf_record()Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/scsi/lpfc/lpfc_hbadisc.c:1505: warning: expecting prototype for lpfc_update_fcf_record(). Prototype was for __lpfc_update_fcf_record() instead Link: https://lore.kernel.org/r/20210303144631.3175331-28-lee.jones@linaro.org Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04scsi: lpfc: Update copyrights for 12.8.0.7 and 12.8.0.8 changesJames Smart1-1/+1
For the files modified in 2021 via the 12.8.0.7 and 12.8.0.8 patch sets, update the copyright for 2021. Link: https://lore.kernel.org/r/20210301171821.3427-23-jsmart2021@gmail.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04scsi: lpfc: Fix vport indices in lpfc_find_vport_by_vpid()James Smart1-2/+2
Calls to lpfc_find_vport_by_vpid() for the highest indexed vport fails with error, "2936 Could not find Vport mapped to vpi XXX". Our vport indices in the loop and if-clauses were off by one. Correct the vpid range used for vpi lookup to include the highest possible vpid. Link: https://lore.kernel.org/r/20210301171821.3427-3-jsmart2021@gmail.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-26scsi: lpfc: Fix ancient double freeDan Carpenter1-8/+7
The "pmb" pointer is freed at the start of the function and then freed again in the error handling code. Link: https://lore.kernel.org/r/YA6E8rO51hE56SVw@mwanda Fixes: 92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-07scsi: lpfc: Implement health checking when aborting I/OJames Smart1-0/+3
Several errors have occurred where the adapter stops or fails but does not raise the register values for the driver to detect failure. Thus driver is unaware of the failure. The failure typically results in I/O timeouts, the I/O timeout handler failing (after several seconds), and the error handler escalating recovery policy and resulting in more errors. Eventually, the driver is in a position where things have spiraled and it can't do recovery because other recovery ops are still outstanding and it becomes unusable. Resolve the situation by having the I/O timeout handler (actually a els, SCSI I/O, NVMe ls, or NVMe I/O timeout), in addition to aborting the I/O, perform a mailbox command and look for a response from the hardware. If the mailbox command fails, it will mark the adapter offline and then invoke the adapter reset handler to clean up. The new I/O timeout test will be limited to a test every 5s. If there are multiple I/O timeouts concurrently, only the 1st I/O timeout will generate the mailbox command. Further testing will only occur once a timeout occurs after a 5s delay from the last mailbox command has expired. Link: https://lore.kernel.org/r/20210104180240.46824-14-jsmart2021@gmail.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-07scsi: lpfc: Fix crash when a fabric node is released prematurelyJames Smart1-5/+13
The driver's management of the fabric controller (aka pseudo-scsi initiator) node in SLI3 mode is causing this crash. The crash occurs because of a node reference imbalance that frees the fabric controller node while devloss is outstanding from the SCSI transport. This is triggered by an odd behavior where the switch reacts to a rejected RDP request with a PLOGI and nothing else, not even a LOGO. The driver ACKS the PLOGI and after successfully registering the RPI, incorrectly registers the fabric controller node because it has the NLP_FC4_FCP flag still set from the fabric controller PRLI. If a LIP is issued, the driver attempts to cleanup on Link Up and ends up executing too many puts. Fix by detecting the fabric node type and clearing out the nodes internal flags that triggered a SCSI transport registration and subsequence dev_loss event. The driver cannot count on any persistence from fabric controller nodes. Link: https://lore.kernel.org/r/20210104180240.46824-5-jsmart2021@gmail.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-19scsi: lpfc: Fix set but unused variables in lpfc_dev_loss_tmo_handler()James Smart1-2/+0
Remove set but not used variable shost in lpfc_dev_loss_tmo_handler(). Link: https://lore.kernel.org/r/20201119203353.121866-1-james.smart@broadcom.com Fixes: 52edb2caf675 ("scsi: lpfc: Remove ndlp when a PLOGI/ADISC/PRLI/REG_RPI ultimately fails") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-19scsi: lpfc: Fix set but not used warnings from Rework remote port lock handlingJames Smart1-4/+0
Remove local variables that are set but not used. Link: https://lore.kernel.org/r/20201119203340.121819-1-james.smart@broadcom.com Fixes: c6adba150191 ("scsi: lpfc: Rework remote port lock handling") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-17scsi: lpfc: Convert abort handling to SLI-3 and SLI-4 handlersJames Smart1-1/+1
This patch reworks the abort interfaces such that SLI-3 retains the iocb-based formatting and completions and SLI-4 now uses native WQEs and completion routines. The following changes are made: - The code is refactored from a confusing 2 routine sequence of xx_abort_iotag_issue(), which creates/formats and abort cmd, and xx_issue_abort_tag(), which then issues and handles the completion of the abort cmd - into a single interface of xx_issue_abort_iotag(). The new interface will determine whether SLI-3 or SLI-4 and then call the appropriate handler. A completion handler can now be specified to address the differences in completion handling. Note: original code is all iocb based, with SLI-4 converting to SLI-3 for the SCSI/ELS path, and NVMe natively using wqes. - The SLI-3 side is refactored: The older iocb-base lpfc_sli_issue_abort_iotag() routine is combined with the logic of lpfc_sli_abort_iotag_issue() as well as the iocb-specific code in lpfc_abort_handler() and lpfc_sli_abort_iocb() to create the new single SLI-3 abort routine that formats and issues the iocb. - The SLI-4 side is refactored and added to: The native WQE abort code in NVMe is moved to the new SLI-4 issue_abort_iotag() routine. Items in SCSI that set fields not set by NVMe is migrated into the new routine. Thus the routine supports NVMe and SCSI initiators. The nvmet block (target) formats the abort slightly different (like the old NVMe initiator) thus it has its own prep routine stolen from NVMe initiator and it retains the current code it has for issuing the WQE (does not use the commonized routine the initiators do). SLI-4 completion handlers were also added. - lpfc_abort_handler now becomes a wrapper that determines whether SLI-3 or SLI-4 and calls the proper abort handler. Link: https://lore.kernel.org/r/20201115192646.12977-16-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-17scsi: lpfc: Fix NPIV Fabric Node reference countingJames Smart1-17/+12
While testing initiator-side cable swaps with NPIV, oops occur. The reference counts for the Fabric nodes on the NPIV vports isn't balanced, resulting in premature node removal. The following fixes were made: - Removed the FC_LBIT check in lpfc_linkup_port. This removed the special case for vports that didn't have them clean up just like the physical port. - Removed the unreg_rpi call in lpfc_cleanup_node. In this section, the node is being removed in the context of a reference count release and a mailbox command can't be issued at this point. - Remove special case handling in the default mailbox completion handler that allowed the skipping of a node reference. Now, reference counting always requires the removal of the reference. - Move the location of the DEVICE_RM event is done during LOGO handling as the driver has additional work to do on the ndlp before puts/releases can be performed. Link: https://lore.kernel.org/r/20201115192646.12977-10-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-28 08:50:46 +0000