summaryrefslogtreecommitdiffstats
path: root/drivers/power/supply/sc27xx_fuel_gauge.c
AgeCommit message (Collapse)AuthorFilesLines
2022-01-03power: supply_core: Pass pointer to battery infoLinus Walleij1-11/+11
The function to retrieve battery info (from the device tree) assumes we have a static info struct that gets populated by calling into power_supply_get_battery_info(). This is awkward since I want to support tables of static battery info by just assigning a pointer to all info based on e.g. a compatible value in the device tree. We also have a mixture of static and dynamically allocated variables here. Bite the bullet and let power_supply_get_battery_info() allocate also the memory used for the very top level struct power_supply_battery_info container. Pass pointers around and lifecycle this with the psy device just like the stuff we allocate inside it. Change all current users over. As part of the change, initializers need to be added to some previously uninitialized fields in struct power_supply_battery_info. Reviewed-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-05power: supply: sc27xx: Delete superfluous error messageTang Bin1-3/+1
In the function sc27xx_fgu_probe(), when get irq failed, platform_get_irq() logs an error message, so remove redundant message here. Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-05-13power: supply: sc27xx: Add missing MODULE_DEVICE_TABLEZou Wei1-0/+1
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-07-28power: supply: sc27xx: prevent adc * 1000 from overflowChunyan Zhang1-4/+5
The input parameter is int type, cause adc * 1000 could overflow. Change to use s64 to avoid this issue. Signed-off-by: Chen Yongzhi <yongzhi.chen@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-04-28power: supply: sc27xx: Add boot voltage supportYuanjiang Yu1-0/+8
Add new property to allow to get the voltage measured during boot time. Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-04-28power: supply: sc27xx: Add CURRENT_NOW/VOLTAGE_NOW properties supportYuanjiang Yu1-2/+58
Add new properties to get present current and voltage of the fuel gauge. Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-04-28power: supply: sc27xx: Allow to change the battery full capacityYuanjiang Yu1-1/+7
The battery full capacity can be affected by the temperature or the servicing time or other factors, so some platforms will track the real battery full capacity in charger manager service. Thus we should allow to change the battery full capacity by setting the 'POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN' property as writeable. Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-04-28power: supply: sc27xx: Set 'no_thermal' flag for SC27xx fuel gaugeYuanjiang Yu1-0/+1
There is no thermal zone should be created for the SC27XX FGU power supply, thus set the 'no_thermal' flag as true. Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-02-24power: supply: sc27xx: Add POWER_SUPPLY_PROP_CHARGE_NOW attributeBaolin Wang1-0/+12
Add the POWER_SUPPLY_PROP_CHARGE_NOW attribute to allow user to get current battery capacity (uAh) to do measurement. Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-12-19power: supply: sc27xx: Calibrate the resistance of coulomb counterBaolin Wang1-1/+16
There are some deviations between the real resistance and the ideal resistance of coulomb counter, which will affect the accuracy of the coulomb counter, thus calibrate the real resistance of coulomb counter to improve the accuracy. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-12-19power: supply: sc27xx: Optimize the battery resistance with measuring ↵Yuanjiang Yu1-2/+30
temperature Optimize the battery internal resistance in a certain temerature to get a accurate battery internal resistance. Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-09-02power: supply: sc27xx: Add POWER_SUPPLY_PROP_CALIBRATE attributeYuanjiang Yu1-8/+19
Add the 'POWER_SUPPLY_PROP_CALIBRATE' attribute to allow chareger manager to calibrate the battery capacity. Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-09-02power: supply: sc27xx: Optimize the battery capacity calibrationYuanjiang Yu1-35/+92
This patch factors out the capacity calibration into one single function to calibrate the battery capacity, and adding more abnormal cases to calibrate the capacity when the OCV value is not matchable with current capacity. Moreover we also allow to calibrate the capacity when charger magager tries to get current capacity to make sure we give a correct capacity for userspace. Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-09-02power: supply: sc27xx: Make sure the alarm capacity is larger than 0Yuanjiang Yu1-0/+2
We must make sure the alarm capacity is larger than 0, to help to calibrate the low battery capacity. Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-09-02power: supply: sc27xx: Fix the the accuracy issue of coulomb calculationYuanjiang Yu1-7/+4
The Spreadtrum fuel gauge will multiply by 2 for counting the coulomb counter to improve the accuracy, which means the value saved in fuel gauge is: coulomb counter * 2 * 1000ma_adc. Thus fix the conversion formular to improve the accuracy of calculating the battery capacity. Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-09-02power: supply: sc27xx: Fix conditon to enable the FGU interruptYuanjiang Yu1-1/+2
We should allow to enable FGU interrupt to adjust the battery capacity, when charging status is POWER_SUPPLY_STATUS_DISCHARGING. Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-09-02power: supply: sc27xx: Add POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN attributeYuanjiang Yu1-0/+5
Add POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN attribute to provide the battery's design capacity for charger manager to calculate the charging counter. Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-09-02power: supply: sc27xx: Replace devm_add_action() followed by failure action ↵Fuqian Huang1-2/+1
with devm_add_action_or_reset() devm_add_action_or_reset() is introduced as a helper function which internally calls devm_add_action(). If devm_add_action() fails then it will execute the action mentioned and return the error code. This reduce source code size (avoid writing the action twice) and reduce the likelyhood of bugs. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-09-02power: supply: sc27xx: Introduce local variable 'struct device *dev'Fuqian Huang1-23/+24
Introduce local variable 'struct device *dev' and use it instead of dereferencing it repeatly. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-23power: supply: sc27xx: Fix capacity saving functionYuanjiang Yu1-5/+59
We found sometimes we can not get the saving capacity to initialize the battery capacity, the reason is the user area registers are put on power always-on region, so we need delay some time to wait until values are updated successfully. Moreover we also should clear the USER_AREA_CLEAR register after setting the USER_AREA_SET register, otherwise we can not save the values in the USER_AREA_SET register. Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-23power: supply: sc27xx: Fix the incorrect formula when converting capacity to ↵Baolin Wang1-1/+1
coulomb counter We should multiply the calibrated current data (cur_1000ma_adc) when converting current capacity (mAh) to coulomb counter, which can get an accurate coulomb counter from the fuel gauge controller. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-01-23power: supply: sc27xx: Add one property to read charge voltageBaolin Wang1-0/+29
Add POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE property to get charge voltage sampling by ADC controller, which is used to validate if the charge voltage is in normal range or not in charger manager. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-06power: supply: sc27xx: Save last battery capacityYuanjiang Yu1-1/+134
Our charger manager can optimize the battery capacity periodically, so we can save last battery capacity into registers. Then next system power-on, we can read the last saved battery capacity as the initial battery capacity, which can make the battery capacity more accurate. Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-06power: supply: sc27xx: Add suspend/resume interfacesYuanjiang Yu1-0/+77
Add fuel gauge platform suspend and resume interfaces. In suspend state, we should enable the low voltage and coulomb counter threshold interrupts to wake up system to calibrate the battery capacity in lower voltage stage. Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-06power: supply: sc27xx: Add fuel gauge low voltage alarmYuanjiang Yu1-1/+170
Add low voltage alarm support to make sure the battery capacity more accurate in lower voltage stage. Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-06power: supply: sc27xx: Add fuel gauge calibrationBaolin Wang1-11/+51
This patch adds support to read calibration values from the eFuse controller to calibrate the ADC values corresponding to current and voltage, which can make the current and voltage data more accurate. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-11-09power: supply: Add Spreadtrum SC27XX fuel gauge unit driverBaolin Wang1-0/+656
This patch adds the Spreadtrum SC27XX serial PMICs fuel gauge support, which is used to calculate the battery capacity. Original-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-13 18:13:07 +0000