summaryrefslogtreecommitdiffstats
path: root/drivers/phy/ti
AgeCommit message (Collapse)AuthorFilesLines
2022-09-24phy: ti: phy-j721e-wiz: fix reference leaks in wiz_probe()Dan Carpenter1-2/+3
These two error paths need to call of_node_put(child_node) before returning. Fixes: edd473d4293a ("phy: ti: phy-j721e-wiz: add support for j7200-wiz-10g") Fixes: 7ae14cf581f2 ("phy: ti: j721e-wiz: Implement DisplayPort mode to the wiz driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/YyxFI8aW23IC/21U@kili Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-20phy: ti: phy-j721e-wiz: stop name conflict if multiple serdes are initializedMatt Ranostay1-1/+14
When multiple serdes instances are initialized the first will succeed but additional will conflict over clocks names and probing fails. Signed-off-by: Matt Ranostay <mranostay@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20220909200026.3422-1-mranostay@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-13phy: ti: gmii-sel: Add support for CPSW5G GMII SEL in J7200Siddharth Vadapalli1-3/+44
Each of the CPSW5G ports in J7200 support additional modes like QSGMII. Add a new compatible for J7200 to support the additional modes. In TI's J7200, each of the CPSW5G ethernet interfaces can act as a QSGMII or QSGMII-SUB port. The QSGMII interface is responsible for performing auto-negotiation between the MAC and the PHY while the rest of the interfaces are designated as QSGMII-SUB interfaces, indicating that they will not be taking part in the auto-negotiation process. To indicate the interface which will serve as the main QSGMII interface, add a property "ti,qsgmii-main-ports", whose value indicates the port number of the interface which shall serve as the main QSGMII interface. The rest of the interfaces are then assigned QSGMII-SUB mode by default. The property "ti,qsgmii-main-ports" is used to configure the CTRLMMR_ENETx_CTRL register. Depending on the device, it is possible for more than one QSGMII main port to exist. Thus, the property "ti,qsgmii-main-ports" is defined as an array of values in order to reuse the property for other devices. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://lore.kernel.org/r/20220912085650.83263-4-s-vadapalli@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-08-30phy: ti: phy-j721e-wiz: set PMA_CMN_REFCLK_DIG_DIV based on reflk rateRoger Quadros1-0/+24
For J7200-SR2.0 and AM64 we don't model Common refclock divider as a clock divider as the divisor rate is fixed based on operating reference clock frequency. We just program the recommended value into the register. This simplifies the device tree and implementation a lot. Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20220628122255.24265-8-rogerq@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-08-30phy: ti: phy-j721e-wiz: add support for j7200-wiz-10gRoger Quadros1-9/+129
j7200-wiz-10g supports 2 reference clocks. However, the control bits for these clocks is in a separate register that sits in the System Control register space. Handle that register. Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20220628122255.24265-7-rogerq@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-08-30phy: ti: phy-j721e-wiz.c: Add usxgmii support in wiz driverTanmay Patil1-1/+50
Changes the wiz_p_mac_div_sel() and wiz_mode_select() to configure serdes for USXGMII. Adds the support to configure mac_src_sel, refclk_sel and rxfclk_sel in the LANECTL register and configures the serdes for usxgmii. [rogerq] Fix MAC_SRC_SEL to 0x3 for USXGMII as per CSL code. Signed-off-by: Tanmay Patil <t-patil@ti.com> Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20220628122255.24265-4-rogerq@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-08-30phy: ti: phy-j721e-wiz: Add SGMII support in wiz driver for J7200Siddharth Vadapalli1-6/+13
Select the same mac divider for SGMII too as the one being used for QSGMII. Enable full rate divider configuration support for J721E_WIZ_10G for SGMII. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20220628122255.24265-2-rogerq@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-08-04Merge tag 'spdx-6.0-rc1' of ↵Linus Torvalds1-10/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...
2022-07-05phy: ti: tusb1210: Don't check for write errors when powering onAndy Shevchenko1-2/+3
On some platforms, like Intel Merrifield, the writing values during power on may timeout: tusb1210 dwc3.0.auto.ulpi: error -110 writing val 0x41 to reg 0x80 phy phy-dwc3.0.auto.ulpi.0: phy poweron failed --> -110 dwc3 dwc3.0.auto: error -ETIMEDOUT: failed to initialize core dwc3: probe of dwc3.0.auto failed with error -110 which effectively fails the probe of the USB controller. Drop the check as it was before the culprit commit (see Fixes tag). Fixes: 09a3512681b3 ("phy: ti: tusb1210: Improve ulpi_read()/_write() error checking") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Ferry Toth <fntoth@gmail.com> Link: https://lore.kernel.org/r/20220613160848.82746-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-16phy: ti: phy-j721e-wiz: use OF data for device specific dataRoger Quadros1-25/+50
Move device specific data into OF data structure so it is easier to maintain and we can get rid of if statements. Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Matt Ranostay <mranostay@ti.com> Link: https://lore.kernel.org/r/20220526064121.27625-1-rogerq@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_30.RULE ↵Thomas Gleixner1-10/+1
(part 2) Based on the normalized pattern: this program is free software you can redistribute it and/or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed as is without any warranty of any kind whether express or implied without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14phy: ti: Add missing pm_runtime_disable() in serdes_am654_probeMiaoqian Lin1-1/+1
The pm_runtime_enable() will increase power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Add missing pm_runtime_disable() for serdes_am654_probe(). Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220301025853.1911-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-13phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocksMiaoqian Lin1-1/+1
The corresponding API for clk_prepare_enable is clk_disable_unprepare. Make sure that the clock is unprepared on exit by changing clk_disable to clk_disable_unprepare. Fixes: ed31ee7cf1fe ("phy: ti: usb2: Fix logic on -EPROBE_DEFER") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220318105748.19532-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-11phy: ti: tusb1210: Fix an error handling path in tusb1210_probe()Christophe JAILLET1-2/+8
tusb1210_probe_charger_detect() must be undone by a corresponding tusb1210_remove_charger_detect() in the error handling path, as already done in the remove function. Fixes: 48969a5623ed ("phy: ti: tusb1210: Add charger detection") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/07c4926c42243cedb3b6067a241bb486fdda01b5.1648991162.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-11phy: ti: Fix missing of_node_put in ti_pipe3_get_sysctrl()Lv Ruyi1-0/+1
of_parse_phandle() returns node pointer with refcount incremented, use of_node_put() on it to decrease refcount when done. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Link: https://lore.kernel.org/r/20220408095617.2495234-1-lv.ruyi@zte.com.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-11phy: ti: tusb1210: Make tusb1210_chg_det_states staticHans de Goede1-1/+1
Make tusb1210_chg_det_states static, fixing the following sparse warning: drivers/phy/ti/phy-tusb1210.c:158:12: sparse: sparse: symbol 'tusb1210_chg_det_states' was not declared. Should it be static? Fixes: 48969a5623ed ("phy: ti: tusb1210: Add charger detection") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220411135440.558394-1-hdegoede@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-25phy: ti: tusb1210: Add charger detectionStephan Gerhold1-7/+370
Some Android x86 tablets with a Bay Trail (BYT) SoC and a Crystal Cove PMIC, which does not support charger-detection, rely on a TUSB1211 phy for charger-detection. Add support for charger detection on TUSB1211 phy-s and export the information about the detected charger through the standard power_supply class interface. power_supply class charger IC drivers like the bq24190_charger.c driver will then pick this up and set their input_current_limit based on this. Note the "linux,phy_charger_detect" property used to enable this is a special kernel-internal (so not part of the dt-bindings) property used by dwc3 platform code to indicate that the phy needs to do charger-detection. Changes by Hans de Goede: - Use "linux,phy_charger_detect" property to enable charger-detect - Switch from a linear flow to a state-machine, with retries on ulpi communication errors - Use SW_CONTROL bit to disable the FSM when detection is finished - Do a phy-reset on disconnect to work around the phy often refusing ulpi_read()/_write() commands after a disconnect - Use power_supply_reg_notifier() for Vbus monitoring - Export the detection result through a power_supply class device Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Co-developed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220213130524.18748-10-hdegoede@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-25phy: ti: tusb1210: Add a delay between power-on and restoring the phy-parametersHans de Goede1-0/+5
Now that we actually log errors on ulpi_write failures it becomes clear that the ulpi_write() restoring the phy-parameters on power-on is failing after a suspend/resume add a short delay after driving the cs line high to fix this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220213130524.18748-9-hdegoede@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-25phy: ti: tusb1210: Drop tusb->vendor_specific2 != 0 check from ↵Hans de Goede1-5/+2
tusb1210_power_on() Since commit eb445a15fa69 ("phy: tusb1210: use bitmasks to set VENDOR_SPECIFIC2") tusb->vendor_specific2 always contains a valid value so there no need to check that it is set. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220213130524.18748-8-hdegoede@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-25phy: ti: tusb1210: Improve ulpi_read()/_write() error checkingHans de Goede1-14/+48
ulpi_read() and ulpi_write() calls can fail. Add wrapper functions to log errors when this happens and add error checking to the read + write of the phy parameters from the TUSB1210_VENDOR_SPECIFIC2 register. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220213130524.18748-7-hdegoede@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-01-24phy: ti: Fix missing sentinel for clk_div_tableKishon Vijay Abraham I1-0/+1
_get_table_maxdiv() tries to access "clk_div_table" array out of bound defined in phy-j721e-wiz.c. Add a sentinel entry to prevent the following global-out-of-bounds error reported by enabling KASAN. [ 9.552392] BUG: KASAN: global-out-of-bounds in _get_maxdiv+0xc0/0x148 [ 9.558948] Read of size 4 at addr ffff8000095b25a4 by task kworker/u4:1/38 [ 9.565926] [ 9.567441] CPU: 1 PID: 38 Comm: kworker/u4:1 Not tainted 5.16.0-116492-gdaadb3bd0e8d-dirty #360 [ 9.576242] Hardware name: Texas Instruments J721e EVM (DT) [ 9.581832] Workqueue: events_unbound deferred_probe_work_func [ 9.587708] Call trace: [ 9.590174] dump_backtrace+0x20c/0x218 [ 9.594038] show_stack+0x18/0x68 [ 9.597375] dump_stack_lvl+0x9c/0xd8 [ 9.601062] print_address_description.constprop.0+0x78/0x334 [ 9.606830] kasan_report+0x1f0/0x260 [ 9.610517] __asan_load4+0x9c/0xd8 [ 9.614030] _get_maxdiv+0xc0/0x148 [ 9.617540] divider_determine_rate+0x88/0x488 [ 9.622005] divider_round_rate_parent+0xc8/0x124 [ 9.626729] wiz_clk_div_round_rate+0x54/0x68 [ 9.631113] clk_core_determine_round_nolock+0x124/0x158 [ 9.636448] clk_core_round_rate_nolock+0x68/0x138 [ 9.641260] clk_core_set_rate_nolock+0x268/0x3a8 [ 9.645987] clk_set_rate+0x50/0xa8 [ 9.649499] cdns_sierra_phy_init+0x88/0x248 [ 9.653794] phy_init+0x98/0x108 [ 9.657046] cdns_pcie_enable_phy+0xa0/0x170 [ 9.661340] cdns_pcie_init_phy+0x250/0x2b0 [ 9.665546] j721e_pcie_probe+0x4b8/0x798 [ 9.669579] platform_probe+0x8c/0x108 [ 9.673350] really_probe+0x114/0x630 [ 9.677037] __driver_probe_device+0x18c/0x220 [ 9.681505] driver_probe_device+0xac/0x150 [ 9.685712] __device_attach_driver+0xec/0x170 [ 9.690178] bus_for_each_drv+0xf0/0x158 [ 9.694124] __device_attach+0x184/0x210 [ 9.698070] device_initial_probe+0x14/0x20 [ 9.702277] bus_probe_device+0xec/0x100 [ 9.706223] deferred_probe_work_func+0x124/0x180 [ 9.710951] process_one_work+0x4b0/0xbc0 [ 9.714983] worker_thread+0x74/0x5d0 [ 9.718668] kthread+0x214/0x230 [ 9.721919] ret_from_fork+0x10/0x20 [ 9.725520] [ 9.727032] The buggy address belongs to the variable: [ 9.732183] clk_div_table+0x24/0x440 Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20220117110108.4117-1-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-30Merge tag 'phy-for-5.17' of ↵Greg Kroah-Hartman1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.17 - New support: - Qualcomm eDP PHY driver - Qualcomm SM8450 UFS, USB2, USB3, PCIe0 and PCIe1 phy support - Lan966x ethernet serdes PHY driver - Support for uniphier NXI & Pro4 SoC - Qualcomm SM6350 USB2 support - Amlogic Meson8 HDMI TX PHY driver - Rockchip rk3568 usb2 support - Intel Thunder Bay eMMC PHY driver - Freescale IMX8 PCIe phy driver - Updates: - Cadence Sierra driver updates for multilink configurations - Bcm usb2 updates for Phy reg space * tag 'phy-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits) phy: cadence: Sierra: Add support for derived reference clock output dt-bindings: phy: cadence-sierra: Add clock ID for derived reference clock phy: cadence: Sierra: Add PCIe + QSGMII PHY multilink configuration phy: cadence: Sierra: Add support for PHY multilink configurations phy: cadence: Sierra: Fix to get correct parent for mux clocks phy: cadence: Sierra: Update single link PCIe register configuration phy: cadence: Sierra: Check PIPE mode PHY status to be ready for operation phy: cadence: Sierra: Check cmn_ready assertion during PHY power on phy: cadence: Sierra: Add PHY PCS common register configurations phy: cadence: Sierra: Rename some regmap variables to be in sync with Sierra documentation phy: cadence: Sierra: Add support to get SSC type from device tree dt-bindings: phy: cadence-sierra: Add binding to specify SSC mode dt-bindings: phy: cadence-torrent: Rename SSC macros to use generic names phy: cadence: Sierra: Prepare driver to add support for multilink configurations phy: cadence: Sierra: Use of_device_get_match_data() to get driver data phy: mediatek: Fix missing check in mtk_mipi_tx_probe phy: uniphier-usb3ss: fix unintended writing zeros to PHY register phy: phy-mtk-tphy: use new io helpers to access register phy: phy-mtk-xsphy: use new io helpers to access register phy: mediatek: add helpers to update bits of registers ...
2021-12-14phy: ti: Use IS_ERR_OR_NULL() to clean codeMiaoqian Lin1-3/+3
Use IS_ERR_OR_NULL() to make the code cleaner. Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20211212142226.23674-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: ti: omap-usb2: Fix the kernel-doc styleVinod Koul1-3/+3
The documentation uses incorrect style, so fix that. drivers/phy/ti/phy-omap-usb2.c:102: warning: Function parameter or member 'comparator' not described in 'omap_usb2_set_comparator' While at it, use a single line for function description Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Liam Beguin <liambeguin@gmail.com> Link: https://lore.kernel.org/r/20211120061531.410771-2-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-20phy: ti: tusb1210: Fix the kernel-doc warnVinod Koul1-1/+1
The comment is not kernel-doc one and starts with /**, so fix that. drivers/phy/ti/phy-tusb1210.c:16: warning: expecting prototype for tusb1210.c(). Prototype was for TUSB1210_VENDOR_SPECIFIC2() instead Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Liam Beguin <liambeguin@gmail.com> Link: https://lore.kernel.org/r/20211116103951.34482-6-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-16phy: ti: report 2 non-kernel-doc commentsRandy Dunlap2-2/+2
Do not use "/**" to begin a non-kernel-doc comment. Fixes these build warnings: drivers/phy/ti/phy-am654-serdes.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * PCIe SERDES driver for AM654x SoC drivers/phy/ti/phy-j721e-wiz.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Wrapper driver for SERDES used in J721E Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: linux-phy@lists.infradead.org Link: https://lore.kernel.org/r/20211115030559.13994-1-rdunlap@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: ti: gmii-sel: check of_get_address() for failureDan Carpenter1-0/+2
Smatch complains that if of_get_address() returns NULL, then "size" isn't initialized. Also it would lead to an Oops. Fixes: 7f78322cdd67 ("phy: ti: gmii-sel: retrieve ports number and base offset from dt") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20210914110038.GB11657@kili Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-06phy: phy-twl4030-usb: Disable PHY for suspendTony Lindgren1-0/+15
Since commit 88d26136a256 ("PM: Prevent runtime suspend during system resume"), PM runtime will not let devices idle during system suspend. This is because of the pm_runtime_get_noresume() call done in device_prepare() that is not released until at device_complete() after resume. We must now disable the USB PHY in suspend if no USB cable is connected. Cc: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210727104512.52968-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-23Merge tag 'phy-for-5.14_v2' of ↵Greg Kroah-Hartman2-7/+16
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.14 version 2 - Updates: - Yaml conversion for renesas,rcar-gen3 pcie phy and rockchip-usb-phy bindings - Support for devm_phy_get() taking NULL phy name - New support: - PCIe phy for Qualcomm IPQ60xx - PCIe phy for Qualcomm SDX55 - USB phy for RK3308 - CAN transceivers phy for TI TCAN104x - Innosilicon-based CSI dphy for rockchip * tag 'phy-for-5.14_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (36 commits) phy: Revert "phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'" phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe() phy: uniphier-pcie: Fix updating phy parameters phy/rockchip: add Innosilicon-based CSI dphy dt-bindings: phy: add yaml binding for rockchip-inno-csi-dphy phy: rockchip: remove redundant initialization of pointer cfg phy: phy-can-transceiver: Add support for generic CAN transceiver driver dt-bindings: phy: Add binding for TI TCAN104x CAN transceivers phy: core: Reword the comment specifying the units of max_link_rate to be Mbps phy: phy-mtk-hdmi: Remove redundant dev_err call in mtk_hdmi_phy_probe() phy: phy-mtk-mipi-dsi: Remove redundant dev_err call in mtk_mipi_tx_probe() phy: phy-mmp3-hsic: Remove redundant dev_err call in mmp3_hsic_phy_probe() phy: bcm-ns-usb3: Remove redundant dev_err call in bcm_ns_usb3_mdio_probe() MAINTAINERS: update marvell,armada-3700-utmi-phy.yaml reference phy: phy-twl4030-usb: use DEVICE_ATTR_RO macro dt-bindings: phy: convert rockchip-usb-phy.txt to YAML phy: phy-rockchip-inno-usb2: add support for RK3308 USB phy dt-bindings: phy: rockchip-inno-usb2: add compatible for rk3308 USB phy phy: stm32: manage optional vbus regulator on phy_power_on/off dt-bindings: phy: add vbus-supply optional property to phy-stm32-usbphyc ...
2021-06-21phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe()Christophe JAILLET1-4/+13
Add an error handling path in the probe to release some resources, as already done in the remove function. Fixes: 609adde838f4 ("phy: Add a driver for dm816x USB PHY") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/ac5136881f6bdec50be19b3bf73b3bc1b15ef1f1.1622898974.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: ti: Fix an error code in wiz_probe()Yang Li1-0/+1
When the code execute this if statement, the value of ret is 0. However, we can see from the dev_err() log that the value of ret should be -EINVAL. Clean up smatch warning: drivers/phy/ti/phy-j721e-wiz.c:1216 wiz_probe() warn: missing error code 'ret' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: c9f9eba06629 ("phy: ti: j721e-wiz: Manage typec-gpio-dir") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1621939832-65535-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: phy-twl4030-usb: use DEVICE_ATTR_RO macroYueHaibing1-3/+3
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR, which makes the code a bit shorter and easier to read. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210520135132.37628-1-yuehaibing@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-16phy: Revert "phy: ti: j721e-wiz: add missing of_node_put"Vinod Koul1-1/+0
This reverts commit 00f2e6f668b0 ("phy: ti: j721e-wiz: add missing of_node_put") as it erroneously adds the of_node_put() as incorrect place. Reported-by: Junlin Yang <yangjunlin@yulong.com> Link: https://lore.kernel.org/r/20210408062914.3813102-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-16phy: ti: j721e-wiz: Add missing include linux/slab.hShixin Liu1-0/+1
When compiling with CONFIG_PHY_J721E_WIZ, Hulk Robot reported: drivers/phy/ti/phy-j721e-wiz.c: In function ‘wiz_mux_clk_register’: drivers/phy/ti/phy-j721e-wiz.c:659:17: error: implicit declaration of function ‘kzalloc’; did you mean ‘vzalloc’? [-Werror=implicit-function-declaration] 659 | parent_names = kzalloc((sizeof(char *) * num_parents), GFP_KERNEL); | ^~~~~~~ | vzalloc drivers/phy/ti/phy-j721e-wiz.c:659:15: warning: assignment to ‘const char **’ from ‘int’ makes pointer from integer without a cast [-Wint-conversion] 659 | parent_names = kzalloc((sizeof(char *) * num_parents), GFP_KERNEL); | ^ drivers/phy/ti/phy-j721e-wiz.c:697:2: error: implicit declaration of function ‘kfree’; did you mean ‘vfree’? [-Werror=implicit-function-declaration] 697 | kfree(parent_names); | ^~~~~ | vfre Fixes: 040cbe768731 ("phy: ti: j721e-wiz: Model the internal clocks without device tree input") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Shixin Liu <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20210408012829.432938-1-liushixin2@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-16phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()Yang Yingliang1-1/+1
This driver's remove path calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This means that the callback function may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that the work is properly cancelled, no longer running, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210407092716.3270248-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-31phy: ti: j721e-wiz: Configure 'p_standard_mode' only for DP/QSGMIIKishon Vijay Abraham I1-0/+2
Configure 'p_standard_mode' only for DP/QSGMII as for other modes it's not used as per the programming sequence. Add "continue" in the else to prevent random value from being written to p_standard_mode. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210331131417.15596-1-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: ti: j721e-wiz: Do not configure wiz if its already configuredFaiz Abbas1-5/+16
Serdes lanes might be shared between multiple cores in some usecases and its not possible to lock PLLs for both the lanes independently by the two cores. This requires a bootloader to configure both the lanes at early boot time. To handle this case, skip all configuration if any of the lanes has already been enabled. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210330110138.24356-2-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: ti: j721e-wiz: Get PHY properties only for "phy" or "link" subnodeKishon Vijay Abraham I1-0/+4
"serdes" node (child node of WIZ) can have sub-nodes for representing links or it can have sub-nodes for representing the various clocks within the serdes. Instead of trying to read "reg" from every child node used for assigning "lane_phy_type", read only if the child node's name is "phy" or "link" subnode. Ideally all PHY dt nodes should have node name as "phy", however existing devicetree used "link" as subnode. So in order to maintain old DT compatibility get PHY properties for "phy" or "link" subnode. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210319124128.13308-5-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: ti: j721e-wiz: Invoke wiz_init() before of_platform_device_create()Kishon Vijay Abraham I1-10/+7
Invoke wiz_init() before configuring anything else in Sierra/Torrent (invoked as part of of_platform_device_create()). wiz_init() resets the SERDES device and any configuration done in the probe() of Sierra/Torrent will be lost. In order to prevent SERDES configuration from getting reset, invoke wiz_init() immediately before invoking of_platform_device_create(). Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Cc: <stable@vger.kernel.org> # v5.10 Link: https://lore.kernel.org/r/20210319124128.13308-3-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: ti: j721e-wiz: add missing call to of_node_put()Yang Li1-0/+1
In one of the error paths of the for_each_child_of_node() loop in of_property_read_u32, add missing call to of_node_put(). Fix the following coccicheck warning: ./drivers/phy/ti/phy-j721e-wiz.c:786:1-23: WARNING: Function "for_each_child_of_node" should have of_node_put() before return around line 795. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1614244674-66556-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: ti: j721e-wiz: Add support for configuring QSGMIIKishon Vijay Abraham I1-2/+62
Configure MAC clock dividers required for QSGMII to be functional. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1614838096-32291-3-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: ti: j721e-wiz: Enable reference clock output in cmn_refclk_<p/m>Kishon Vijay Abraham I1-0/+89
cmn_refclk_<p/m> lines in Torrent SERDES is used for connecting external reference clock. cmn_refclk_<p/m> can also be configured to output the reference clock. In order to drive the refclk out from the SERDES (Cadence Torrent), PHY_EN_REFCLK should be set in SERDES_RST of WIZ. Model PHY_EN_REFCLK as a clock, so that platforms like AM642 EVM can enable it. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210310120840.16447-6-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: ti: j721e-wiz: Model the internal clocks without device tree inputKishon Vijay Abraham I1-5/+139
commit 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") modeled the internal clocks depending on the subnodes that are populated in device tree. However recent discussions in the mailing list [1] suggested to just add #clock cells in the parent DT node and model the clocks within the driver. Model the mux clocks without device tree input for AM64x SoC. Don't remove the earlier design since DT nodes for J7200 and J721e are already upstreamed. [1] -> http://lore.kernel.org/r/20210108025943.GA1790601@robh.at.kernel.org Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210310120840.16447-5-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: ti: j721e-wiz: Configure full rate divider for AM64Kishon Vijay Abraham I1-3/+36
The frequency of the txmclk between PCIe and SERDES has changed to 250MHz from 500MHz. Configure full rate divider for AM64 accordingly. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210310120840.16447-4-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: ti: j721e-wiz: Delete "clk_div_sel" clk provider during cleanupKishon Vijay Abraham I1-0/+6
commit 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") modeled both MUX clocks and DIVIDER clocks in wiz. However during cleanup, it removed only the MUX clock provider. Remove the DIVIDER clock provider here. Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210310120840.16447-3-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: ti: j721e-wiz: Remove "regmap_field" from wiz_clk_{mux|div}_selKishon Vijay Abraham I1-41/+34
Both "struct wiz_clk_div_sel" and "struct wiz_clk_mux_sel" are static data that is common for all wiz instances. Including "struct regmap_field" for each of the wiz instances can yield undesirable results. Move "struct regmap_field" out of "struct wiz_clk_div_sel" and "struct wiz_clk_mux_sel" and make them point to constant data. So far no issues are observed since both these structures are not accessed outside the probe. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210310120840.16447-2-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-15phy: ti: j721e-wiz: add missing of_node_putJunlin Yang1-0/+1
Fix OF node leaks by calling of_node_put in for_each_child_of_node when the cycle returns. Generated by: scripts/coccinelle/iterators/for_each_child.cocci Signed-off-by: Junlin Yang <yangjunlin@yulong.com> Link: https://lore.kernel.org/r/20210216082739.1414-1-angkery@163.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-12phy: tusb1210: use bitmasks to set VENDOR_SPECIFIC2Liam Beguin1-13/+14
Start by reading the content of the VENDOR_SPECIFIC2 register and update each bit field based on device properties when defined. The use of bit masks prevents fields from overriding each other and enables users to clear bits which are set by default, like datapolarity in this instance. Signed-off-by: Liam Beguin <lvb@xiphos.com> Link: https://lore.kernel.org/r/20201211191241.21306-1-liambeguin@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-16phy: ti: convert to devm_platform_ioremap_resource(_byname)Chunfeng Yun3-25/+11
Use devm_platform_ioremap_resource(_byname) to simplify code Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1604642930-29019-17-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-05Merge 5.9-rc8 into usb-nextGreg Kroah-Hartman1-2/+4
We need the USB fixes in here as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 01:37:30 +0000