summaryrefslogtreecommitdiffstats
path: root/drivers/pci/controller/pci-aardvark.c
AgeCommit message (Collapse)AuthorFilesLines
2022-12-07PCI: aardvark: Switch to using devm_gpiod_get_optional()Dmitry Torokhov1-12/+10
Switch the driver to the generic version of gpiod API (and away from OF-specific variant), so that we can stop exporting devm_gpiod_get_from_of_node(). Link: https://lore.kernel.org/r/Y3KMEZFv6dpxA+Gv@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Pali Rohár <pali@kernel.org>
2022-10-05Merge branch 'remotes/lorenzo/pci/bridge-emul'Bjorn Helgaas1-0/+1
- In an emulated PCI bridge, set Capability offsets so they match the hardware offsets shown by U-Boot (Pali Rohár) * remotes/lorenzo/pci/bridge-emul: PCI: pci-bridge-emul: Set position of PCI capabilities to real HW value
2022-09-16PCI: aardvark: Add support for PCI Bridge Subsystem Vendor ID on emulated bridgePali Rohár1-0/+3
Register with Subsystem Device/Vendor ID is at offset 0x2c. Export it via the emulated bridge to enable support for the Subsystem Device/Vendor ID - by reading it in the PCI controller config space and storing it in the emulated bridge control structures, so that it is exposed in the respective PCI capability. After this change Subsystem ID is visible in lspci output at line: Capabilities: [40] Subsystem Link: https://lore.kernel.org/r/20220711225915.13896-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-08-25PCI: pci-bridge-emul: Set position of PCI capabilities to real HW valuePali Rohár1-0/+1
mvebu and aardvark HW have PCIe capabilities on different offset in PCI config space. Extend pci-bridge-emul.c code to allow setting custom driver custom value where PCIe capabilities starts. With this change PCIe capabilities of both drivers are reported at the same location as where they are reported by U-Boot - in their real HW offset. Link: https://lore.kernel.org/r/20220824112124.21675-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-06-13PCI: aardvark: Fix reporting Slot capabilities on emulated bridgePali Rohár1-9/+24
Slot capabilities are currently not reported because emulated bridge does not report the PCI_EXP_FLAGS_SLOT flag. Set PCI_EXP_FLAGS_SLOT to let the kernel know that PCI_EXP_SLT* registers are supported. Move setting of PCI_EXP_SLTCTL register from "dynamic" pcie_conf_read function to static buffer as it is only statically filled the PCI_EXP_SLTSTA_PDS flag and dynamic read callback is not needed for this register. Set Presence State Bit to 1 since there is no support for unplugging the card and there is currently no platform able to detect presence of a card - in such a case the bit needs to be set to 1. Finally correctly set Physical Slot Number to 1 since there is only one port and zero value is reserved for ports within the same silicon as Root Port which is not our case for Aardvark HW. Link: https://lore.kernel.org/r/20220524132827.8837-3-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-06-13PCI: aardvark: Add support for AER registers on emulated bridgePali Rohár1-0/+79
Aardvark controller supports Advanced Error Reporting configuration registers. Export these registers on the emulated root bridge via new .read_ext() and .write_ext() methods. Note that in the Advanced Error Reporting Capability header the offset to the next Extended Capability header is set, but it is not documented in Armada 3700 Functional Specification. Since this change adds support only for Advanced Error Reporting, explicitly clear PCI_EXT_CAP_NEXT bits in AER capability header. Now the pcieport driver correctly detects AER support and allows PCIe AER driver to start receiving ERR interrupts. Kernel log now says: pcieport 0000:00:00.0: AER: enabled with IRQ 52 Link: https://lore.kernel.org/r/20220524132827.8837-2-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-16Revert "PCI: aardvark: Rewrite IRQ code to chained IRQ handler"Pali Rohár1-26/+22
This reverts commit 1571d67dc190e50c6c56e8f88cdc39f7cc53166e. This commit broke support for setting interrupt affinity. It looks like that it is related to the chained IRQ handler. Revert this commit until issue with setting interrupt affinity is fixed. Fixes: 1571d67dc190 ("PCI: aardvark: Rewrite IRQ code to chained IRQ handler") Link: https://lore.kernel.org/r/20220515125815.30157-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-03-28Merge tag 'char-misc-5.18-rc1' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...
2022-03-22Merge branch 'remotes/lorenzo/pci/mvebu'Bjorn Helgaas1-1/+1
- Add Pali Rohár as pci-mvebu.c maintainer (Pali Rohár) - Make struct pci_bridge_emul_ops const (Pali Rohár) - Rename PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR to PCI_BRIDGE_EMUL_NO_PREFMEM_FORWARD since it doesn't apply to BARs (Pali Rohár) - Add new flag PCI_BRIDGE_EMUL_NO_IO_FORWARD for bridges that don't support IO forwarding (Pali Rohár) - Add Kconfig help text for CONFIG_PCI_MVEBU (Pali Rohár) - Remove duplicate nports assignment (Pali Rohár) - Set PCI_BRIDGE_EMUL_NO_IO_FORWARD when IO is unsupported (Pali Rohár) - Initialize vendor, device and revision of emulated bridge (Pali Rohár) - Fix Data Link Layer Link Active reporting on emulated bridge (Pali Rohár) - Rearrange tests in bridge emulation for easier maintenance (Russell King) - Add emulated bridge support for PCIe extended capabilities (Russell King) - Add emulated bridge support for bridge Subsystem Vendor ID capability (Pali Rohár) - Configure Maximum Link Width based on DT "num-lanes" property (Pali Rohár) - Emulate bridge Subsystem Vendor ID capability (Pali Rohár) - Emulate AER Capability (Pali Rohár) - Use PCI core bridge->ops and bridge->child_ops to separate config accesses to Root Port vs downstream devices (Pali Rohár) - Unmask all INTx interrupts; they're reported via a single shared GIC source (Pali Rohár) - Add INTx support (Pali Rohár) * remotes/lorenzo/pci/mvebu: PCI: mvebu: Implement support for legacy INTx interrupts PCI: mvebu: Fix macro names and comments about legacy interrupts dt-bindings: PCI: mvebu: Update information about intx interrupts PCI: mvebu: Use child_ops API PCI: mvebu: Add support for Advanced Error Reporting registers on emulated bridge PCI: mvebu: Add support for PCI Bridge Subsystem Vendor ID on emulated bridge PCI: mvebu: Correctly configure x1/x4 mode dt-bindings: PCI: mvebu: Add num-lanes property PCI: pci-bridge-emul: Add support for PCI Bridge Subsystem Vendor ID capability PCI: pci-bridge-emul: Add support for PCIe extended capabilities PCI: pci-bridge-emul: Re-arrange register tests PCI: mvebu: Fix reporting Data Link Layer Link Active on emulated bridge PCI: mvebu: Update comment for PCI_EXP_LNKCTL register on emulated bridge PCI: mvebu: Update comment for PCI_EXP_LNKCAP register on emulated bridge PCI: mvebu: Properly initialize vendor, device and revision of emulated bridge PCI: mvebu: Set PCI_BRIDGE_EMUL_NO_IO_FORWARD when IO is unsupported PCI: mvebu: Remove duplicate nports assignment PCI: mvebu: Add help string for CONFIG_PCI_MVEBU option PCI: pci-bridge-emul: Add support for new flag PCI_BRIDGE_EMUL_NO_IO_FORWARD PCI: pci-bridge-emul: Rename PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR to PCI_BRIDGE_EMUL_NO_PREFMEM_FORWARD PCI: pci-bridge-emul: Make struct pci_bridge_emul_ops as const MAINTAINERS: Add Pali Rohár as pci-mvebu.c maintainer
2022-03-22Merge branch 'remotes/lorenzo/pci/aardvark'Bjorn Helgaas1-116/+274
- Use PCI_INTERRUPT_* definitions from PCI core instead of custom ones (Pali Rohár) - Derive MSI number from bit(s) set in PCIE_MSI_STATUS_REG, not from PCIE_MSI_PAYLOAD_REG (Pali Rohár) - Align multi-MSI vectors to power of two (Pali Rohár) - Rewrite IRQ code to use chained IRQ handler (Pali Rohár) - Check return value of generic_handle_domain_irq() and warn about spurious interrupts (Pali Rohár) - Make MSI irq_chip structures static to driver (Marek Behún) - Make msi_domain_info structure static to driver (Marek Behún) - Use dev_fwnode() instead of of_node_to_fwnode(dev->of_node) (Marek Behún) - Refactor unmasking of summary MSI interrupt (Pali Rohár) - Add support for masking MSI interrupts and leave them masked at setup (Pali Rohár) - Set MSI doorbell address to address of struct advk_pcie (Pali Rohár) - Enable MSI-X support (Pali Rohár) - Add support for ERR interrupt on emulated bridge (Pali Rohár) - Fix read of PCI_EXP_RTSTA_PME bit on emulated bridge (Pali Rohár) - Optimize writing PCI_EXP_RTCTL_PMEIE and PCI_EXP_RTSTA_PME on emulated bridge (Pali Rohár) - Add support for PME interrupts (Pali Rohár) - Fix support for PME requester on emulated bridge (Pali Rohár) - Use separate INTA interrupt for emulated Root Port so PME and AER interrupt is not shared with downstream devices (Pali Rohár) - Remove irq_mask_ack() callback for INTx interrupts (Pali Rohár) - Don't mask legacy INTx interrupts when mapping (Pali Rohár) - Drop unnecessary "__maybe_unused" from advk_pcie_disable_phy() (Marek Behún) - Update comment about why we check for link being up before issuing a config request (Marek Behún) * remotes/lorenzo/pci/aardvark: PCI: aardvark: Update comment about link going down after link-up PCI: aardvark: Drop __maybe_unused from advk_pcie_disable_phy() PCI: aardvark: Don't mask irq when mapping PCI: aardvark: Remove irq_mask_ack() callback for INTx interrupts PCI: aardvark: Use separate INTA interrupt for emulated root bridge PCI: aardvark: Fix support for PME requester on emulated bridge PCI: aardvark: Add support for PME interrupts PCI: aardvark: Optimize writing PCI_EXP_RTCTL_PMEIE and PCI_EXP_RTSTA_PME on emulated bridge PCI: aardvark: Fix reading PCI_EXP_RTSTA_PME bit on emulated bridge PCI: aardvark: Add support for ERR interrupt on emulated bridge PCI: aardvark: Enable MSI-X support PCI: aardvark: Fix setting MSI address PCI: aardvark: Add support for masking MSI interrupts PCI: aardvark: Refactor unmasking summary MSI interrupt PCI: aardvark: Use dev_fwnode() instead of of_node_to_fwnode(dev->of_node) PCI: aardvark: Make msi_domain_info structure a static driver structure PCI: aardvark: Make MSI irq_chip structures static driver structures PCI: aardvark: Check return value of generic_handle_domain_irq() when processing INTx IRQ PCI: aardvark: Rewrite IRQ code to chained IRQ handler PCI: aardvark: Fix support for MSI interrupts PCI: aardvark: Fix reading MSI interrupt number PCI: aardvark: Replace custom PCIE_CORE_INT_* macros with PCI_INTERRUPT_*
2022-02-25Revert "PCI: aardvark: Fix initialization with old Marvell's Arm Trusted ↵Pali Rohár1-3/+1
Firmware" This reverts commit b0c6ae0f8948a2be6bf4e8b4bbab9ca1343289b6. Armada 3720 phy driver (phy-mvebu-a3700-comphy.c) does not return -EOPNOTSUPP from phy_power_on() callback anymore. So remove dead code which handles -EOPNOTSUPP return value. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20220203214444.1508-6-kabel@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-17PCI: Add defines for normal and subtractive PCI bridgesPali Rohár1-1/+1
Add these PCI class codes to pci_ids.h: PCI_CLASS_BRIDGE_PCI_NORMAL PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE Use these defines in all kernel code for describing PCI class codes for normal and subtractive PCI bridges. [bhelgaas: similar change in pci-mvebu.c] Link: https://lore.kernel.org/r/20220214114109.26809-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-02-08PCI: aardvark: Update comment about link going down after link-upMarek Behún1-2/+6
Update the comment about what happens when link goes down after we have checked for link-up. If a PIO request is done while link-down, we have a serious problem. Link: https://lore.kernel.org/r/20220110015018.26359-23-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Drop __maybe_unused from advk_pcie_disable_phy()Marek Behún1-1/+1
This function is now always used in driver remove method, drop the __maybe_unused attribute. Link: https://lore.kernel.org/r/20220110015018.26359-22-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Don't mask irq when mappingPali Rohár1-1/+0
By default, all Legacy INTx interrupts are masked, so there is no need to mask this interrupt during irq_map() callback. Link: https://lore.kernel.org/r/20220110015018.26359-21-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Remove irq_mask_ack() callback for INTx interruptsPali Rohár1-1/+0
Callback for irq_mask_ack() is the same as for irq_mask(). As there is no special handling for irq_ack(), there is no need to define irq_mask_ack() too. Link: https://lore.kernel.org/r/20220110015018.26359-20-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Marc Zyngier <maz@kernel.org>
2022-02-08PCI: aardvark: Use separate INTA interrupt for emulated root bridgePali Rohár1-2/+67
Emulated root bridge currently provides only one Legacy INTA interrupt which is used for reporting PCIe PME and ERR events and handled by kernel PCIe PME and AER drivers. Aardvark HW reports these PME and ERR events separately, so there is no need to mix real INTA interrupt and emulated INTA interrupt for PCIe PME and AER drivers. Register a new advk-RP (as in Root Port) irq chip and a new irq domain for emulated root bridge and use this new separate irq domain for providing INTA interrupt from emulated root bridge for PME and ERR events. The real INTA interrupt from real devices is now separate. A custom map_irq callback function on PCI host bridge structure is used to allocate IRQ mapping for emulated root bridge from new irq domain. Original callback of_irq_parse_and_map_pci() is used for all other devices as before. Link: https://lore.kernel.org/r/20220110015018.26359-19-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Fix support for PME requester on emulated bridgePali Rohár1-41/+50
Enable aardvark PME interrupt unconditionally by unmasking it and read PME requester ID to emulated bridge config space immediately after receiving interrupt. PME requester ID is stored in the PCIE_MSG_LOG_REG register, which contains the last inbound message. So when new inbound message is received by HW (including non-PM), the content in PCIE_MSG_LOG_REG register is replaced by a new value. PCIe specification mandates that subsequent PMEs are kept pending until the PME Status Register bit is cleared by software by writing a 1b. Support for masking/unmasking PME interrupt on emulated bridge via PCI_EXP_RTCTL_PMEIE bit is now implemented only in emulated bridge config space, to ensure that we do not miss any aardvark PME interrupt. Reading of PCI_EXP_RTCAP and PCI_EXP_RTSTA registers is simplified as final value is now always stored into emulated bridge config space by the interrupt handler, so there is no need to implement support for these registers in read_pcie callback. Clearing of W1C bit PCI_EXP_RTSTA_PME is now also simplified as it is done by pci-bridge-emul.c code for emulated bridge config space. So there is no need to implement support for clearing this bit in write_pcie callback. Link: https://lore.kernel.org/r/20220110015018.26359-18-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Add support for PME interruptsPali Rohár1-0/+12
Currently enabling PCI_EXP_RTSTA_PME bit in PCI_EXP_RTCTL register does nothing. This is because PCIe PME driver expects to receive PCIe interrupt defined in PCI_EXP_FLAGS_IRQ register, but aardvark hardware does not trigger PCIe INTx/MSI interrupt for PME event, rather it triggers custom aardvark interrupt which this driver is not processing yet. Fix this issue by handling PME interrupt in advk_pcie_handle_int() and chaining it to PCIe interrupt 0 with generic_handle_domain_irq() (since aardvark sets PCI_EXP_FLAGS_IRQ to zero). With this change PCIe PME driver finally starts receiving PME interrupt. Link: https://lore.kernel.org/r/20220110015018.26359-17-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Optimize writing PCI_EXP_RTCTL_PMEIE and PCI_EXP_RTSTA_PME on ↵Pali Rohár1-9/+11
emulated bridge To optimize advk_pci_bridge_emul_pcie_conf_write() code, touch PCIE_ISR0_REG and PCIE_ISR0_MASK_REG registers only when it is really needed, when processing PCI_EXP_RTCTL_PMEIE and PCI_EXP_RTSTA_PME bits. Link: https://lore.kernel.org/r/20220110015018.26359-16-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Fix reading PCI_EXP_RTSTA_PME bit on emulated bridgePali Rohár1-1/+3
The emulated bridge returns incorrect value for PCI_EXP_RTSTA register during readout in advk_pci_bridge_emul_pcie_conf_read() function: the correct bit is BIT(16), but we are setting BIT(23), because the code does *value = (isr0 & PCIE_MSG_PM_PME_MASK) << 16 where PCIE_MSG_PM_PME_MASK is BIT(7). The code should probably have been something like *value = (!!(isr0 & PCIE_MSG_PM_PME_MASK)) << 16, but we are better of using an if() and using the proper macro for this bit. Link: https://lore.kernel.org/r/20220110015018.26359-15-kabel@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Add support for ERR interrupt on emulated bridgePali Rohár1-1/+34
ERR interrupt is triggered when corresponding bit is unmasked in both ISR0 and PCI_EXP_DEVCTL registers. Unmasking ERR bits in PCI_EXP_DEVCTL register is not enough. This means that currently the ERR interrupt is never triggered. Unmask ERR bits in ISR0 register at driver probe time. ERR interrupt is not triggered until ERR bits are unmasked also in PCI_EXP_DEVCTL register, which is done by AER driver. So it is safe to unconditionally unmask all ERR bits in aardvark probe. Aardvark HW sets PCI_ERR_ROOT_AER_IRQ to zero and when corresponding bits in ISR0 and PCI_EXP_DEVCTL are enabled, the HW triggers a generic interrupt on GIC. Chain this interrupt to PCIe interrupt 0 with generic_handle_domain_irq() to allow processing of ERR interrupts. Link: https://lore.kernel.org/r/20220110015018.26359-14-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Enable MSI-X supportPali Rohár1-1/+1
According to PCI 3.0 specification, sending both MSI and MSI-X interrupts is done by DWORD memory write operation to doorbell message address. The write operation for MSI has zero upper 16 bits and the MSI interrupt number in the lower 16 bits, while the write operation for MSI-X contains a 32-bit value from MSI-X table. Since the driver only uses interrupt numbers from range 0..31, the upper 16 bits of the DWORD memory write operation to doorbell message address are zero even for MSI-X interrupts. Thus we can enable MSI-X interrupts. Testing proves that kernel can correctly receive MSI-X interrupts from PCIe cards which supports both MSI and MSI-X interrupts. Link: https://lore.kernel.org/r/20220110015018.26359-13-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Fix setting MSI addressPali Rohár1-12/+9
MSI address for receiving MSI interrupts needs to be correctly set before enabling processing of MSI interrupts. Move code for setting PCIE_MSI_ADDR_LOW_REG and PCIE_MSI_ADDR_HIGH_REG from advk_pcie_init_msi_irq_domain() to advk_pcie_setup_hw(), before enabling PCIE_CORE_CTRL2_MSI_ENABLE. After this we can remove the now unused member msi_msg, which was used only for MSI doorbell address. MSI address can be any address which cannot be used to DMA to. So change it to the address of the main struct advk_pcie. Link: https://lore.kernel.org/r/20220110015018.26359-12-kabel@kernel.org Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org # f21a8b1b6837 ("PCI: aardvark: Move to MSI handling using generic MSI support")
2022-02-08PCI: aardvark: Add support for masking MSI interruptsPali Rohár1-5/+49
We should not unmask MSIs at setup, but only when kernel asks for them to be unmasked. At setup, mask all MSIs, and implement IRQ chip callbacks for masking and unmasking particular MSIs. Link: https://lore.kernel.org/r/20220110015018.26359-11-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Refactor unmasking summary MSI interruptPali Rohár1-4/+6
Refactor the masking of ISR0/1 Sources and unmasking of summary MSI interrupt so that it corresponds to the comments: - first mask all ISR0/1 - then unmask all MSIs - then unmask summary MSI interrupt Link: https://lore.kernel.org/r/20220110015018.26359-10-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Use dev_fwnode() instead of of_node_to_fwnode(dev->of_node)Marek Behún1-2/+1
Use simple dev_fwnode(dev) instead of struct device_node *node = dev->of_node; of_node_to_fwnode(node) especially since the node variable is not used elsewhere in the function. Link: https://lore.kernel.org/r/20220110015018.26359-9-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Make msi_domain_info structure a static driver structureMarek Behún1-8/+8
Make Aardvark's msi_domain_info structure into a private driver structure. Domain info is same for every potential instatination of a controller. Link: https://lore.kernel.org/r/20220110015018.26359-8-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Make MSI irq_chip structures static driver structuresMarek Behún1-14/+12
In [1] it was agreed that we should use struct irq_chip as a global static struct in the driver. Even though the structure currently contains a dynamic member (parent_device), In [2] the plans to kill it and make the structure completely static were set out. Convert Aardvark's priv->msi_bottom_irq_chip and priv->msi_irq_chip to static driver structure. [1] https://lore.kernel.org/linux-pci/877dbcvngf.wl-maz@kernel.org/ [2] https://lore.kernel.org/linux-pci/874k6gvkhz.wl-maz@kernel.org/ Link: https://lore.kernel.org/r/20220110015018.26359-7-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Check return value of generic_handle_domain_irq() when ↵Pali Rohár1-1/+3
processing INTx IRQ It is possible that we receive spurious INTx interrupt. Check for the return value of generic_handle_domain_irq() when processing INTx IRQ. Link: https://lore.kernel.org/r/20220110015018.26359-6-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Rewrite IRQ code to chained IRQ handlerPali Rohár1-22/+26
Rewrite the code to use irq_set_chained_handler_and_data() handler with chained_irq_enter() and chained_irq_exit() processing instead of using devm_request_irq(). advk_pcie_irq_handler() reads IRQ status bits and calls other functions based on which bits are set. These functions then read its own IRQ status bits and calls other aardvark functions based on these bits. Finally generic_handle_domain_irq() with translated linux IRQ numbers are called. Link: https://lore.kernel.org/r/20220110015018.26359-5-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Fix support for MSI interruptsPali Rohár1-10/+6
Aardvark hardware supports Multi-MSI and MSI_FLAG_MULTI_PCI_MSI is already set for the MSI chip. But when allocating MSI interrupt numbers for Multi-MSI, the numbers need to be properly aligned, otherwise endpoint devices send MSI interrupt with incorrect numbers. Fix this issue by using function bitmap_find_free_region() instead of bitmap_find_next_zero_area(). To ensure that aligned MSI interrupt numbers are used by endpoint devices, we cannot use Linux virtual irq numbers (as they are random and not properly aligned). Instead we need to use the aligned hwirq numbers. This change fixes receiving MSI interrupts on Armada 3720 boards and allows using NVMe disks which use Multi-MSI feature with 3 interrupts. Without this NVMe disks freeze booting as linux nvme-core.c is waiting 60s for an interrupt. Link: https://lore.kernel.org/r/20220110015018.26359-4-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Fix reading MSI interrupt numberPali Rohár1-7/+2
In advk_pcie_handle_msi() it is expected that when bit i in the W1C register PCIE_MSI_STATUS_REG is cleared, the PCIE_MSI_PAYLOAD_REG is updated to contain the MSI number corresponding to index i. Experiments show that this is not so, and instead PCIE_MSI_PAYLOAD_REG always contains the number of the last received MSI, overall. Do not read PCIE_MSI_PAYLOAD_REG register for determining MSI interrupt number. Since Aardvark already forbids more than 32 interrupts and uses own allocated hwirq numbers, the msi_idx already corresponds to the received MSI number. Link: https://lore.kernel.org/r/20220110015018.26359-3-kabel@kernel.org Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-08PCI: aardvark: Replace custom PCIE_CORE_INT_* macros with PCI_INTERRUPT_*Pali Rohár1-5/+1
Header file linux/pci.h defines enum pci_interrupt_pin with corresponding PCI_INTERRUPT_* values. Link: https://lore.kernel.org/r/20220110015018.26359-2-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
2022-02-03PCI: pci-bridge-emul: Make struct pci_bridge_emul_ops as constPali Rohár1-1/+1
It is read-only constant structure, so properly mark it with const keyword. Link: https://lore.kernel.org/r/20220104153529.31647-3-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-01-16Merge tag 'pci-v5.17-changes' of ↵Linus Torvalds1-14/+65
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Use pci_find_vsec_capability() instead of open-coding it (Andy Shevchenko) - Convert pci_dev_present() stub from macro to static inline to avoid 'unused variable' errors (Hans de Goede) - Convert sysfs slot attributes from default_attrs to default_groups (Greg Kroah-Hartman) - Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum (Rajat Jain) - Remove unnecessary initialization of static variables (Longji Guo) Resource management: - Always write Intel I210 ROM BAR on update to work around device defect (Bjorn Helgaas) PCIe native device hotplug: - Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede) - Fix infinite loop in pciehp IRQ handler on power fault (Lukas Wunner) Power management: - Convert amd64-agp, sis-agp, via-agp from legacy PCI power management to generic power management (Vaibhav Gupta) IOMMU: - Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller so it can work with an IOMMU (Yifeng Li) Error handling: - Add PCI_ERROR_RESPONSE and related definitions for signaling and checking for transaction errors on PCI (Naveen Naidu) - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead of in host controller drivers, when transactions fail on PCI (Naveen Naidu) - Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads (Naveen Naidu) Peer-to-peer DMA: - Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas) ASPM: - Calculate link L0s and L1 exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Calculate device L0s and L1 acceptable exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Remove struct aspm_latency since it's no longer needed (Saheed O. Bolarinwa) APM X-Gene PCIe controller driver: - Fix IB window setup, which was broken by the fact that IB resources are now sorted in address order instead of DT dma-ranges order (Rob Herring) Apple PCIe controller driver: - Enable clock gating to save power (Hector Martin) - Fix REFCLK1 enable/poll logic (Hector Martin) Broadcom STB PCIe controller driver: - Declare bitmap correctly for use by bitmap interfaces (Christophe JAILLET) - Clean up computation of legacy and non-legacy MSI bitmasks (Florian Fainelli) - Update suspend/resume/remove error handling to warn about errors and not fail the operation (Jim Quinlan) - Correct the "pcie" and "msi" interrupt descriptions in DT binding (Jim Quinlan) - Add DT bindings for endpoint voltage regulators (Jim Quinlan) - Split brcm_pcie_setup() into two functions (Jim Quinlan) - Add mechanism for turning on voltage regulators for connected devices (Jim Quinlan) - Turn voltage regulators for connected devices on/off when bus is added or removed (Jim Quinlan) - When suspending, don't turn off voltage regulators for wakeup devices (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Add i.MX8MM support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Use DWC common ops instead of layerscape-specific link-up functions (Hou Zhiqiang) Intel VMD host bridge driver: - Honor platform ACPI _OSC feature negotiation for Root Ports below VMD (Kai-Heng Feng) - Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan) - Reset everything below VMD before enumerating to work around failure to enumerate NVMe devices when guest OS reboots (Nirmal Patel) Bridge emulation (used by Marvell Aardvark and MVEBU): - Make emulated ROM BAR read-only by default (Pali Rohár) - Make some emulated legacy PCI bits read-only for PCIe devices (Pali Rohár) - Update reserved bits in emulated PCIe Capability (Pali Rohár) - Allow drivers to emulate different PCIe Capability versions (Pali Rohár) - Set emulated Capabilities List bit for all PCIe devices, since they must have at least a PCIe Capability (Pali Rohár) Marvell Aardvark PCIe controller driver: - Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2, DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali Rohár) - Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2 registers (Pali Rohár) - Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár) - Disable bus mastering when unbinding host controller driver (Pali Rohár) - Mask all interrupts when unbinding host controller driver (Pali Rohár) - Fix memory leak in host controller unbind (Pali Rohár) - Assert PERST# when unbinding host controller driver (Pali Rohár) - Disable link training when unbinding host controller driver (Pali Rohár) - Disable common PHY when unbinding host controller driver (Pali Rohár) - Fix resource type checking to check only IORESOURCE_MEM, not IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár) Marvell MVEBU PCIe controller driver: - Implement pci_remap_iospace() for ARM so mvebu can use devm_pci_remap_iospace() instead of the previous ARM-specific pci_ioremap_io() interface (Pali Rohár) - Use the standard pci_host_probe() instead of the device-specific mvebu_pci_host_probe() (Pali Rohár) - Replace all uses of ARM-specific pci_ioremap_io() with the ARM implementation of the standard pci_remap_iospace() interface and remove pci_ioremap_io() (Pali Rohár) - Skip initializing invalid Root Ports (Pali Rohár) - Check for errors from pci_bridge_emul_init() (Pali Rohár) - Ignore any bridges at non-zero function numbers (Pali Rohár) - Return ~0 data for invalid config read size (Pali Rohár) - Disallow mapping interrupts on emulated bridges (Pali Rohár) - Clear Root Port Memory & I/O Space Enable and Bus Master Enable at initialization (Pali Rohár) - Make type bits in Root Port I/O Base register read-only (Pali Rohár) - Disable Root Port windows when base/limit set to invalid values (Pali Rohár) - Set controller to Root Complex mode (Pali Rohár) - Set Root Port Class Code to PCI Bridge (Pali Rohár) - Update emulated Root Port secondary bus numbers to better reflect the actual topology (Pali Rohár) - Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so pci_reset_secondary_bus() can reset connected devices (Pali Rohár) - Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root Ports (Pali Rohár) - Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports (Pali Rohár) - Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on Armada XP and newer devices (Pali Rohár) - Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module (Pali Rohár) - Add support for compiling as a module (Pali Rohár) MediaTek PCIe controller driver: - Assert PERST# for 100ms to allow power and clock to stabilize (qizhong cheng) MediaTek PCIe Gen3 controller driver: - Disable Mediatek DVFSRC voltage request since lack of DVFSRC to respond to the request causes failure to exit L1 PM Substate (Jianjun Wang) MediaTek MT7621 PCIe controller driver: - Declare mt7621_pci_ops static (Sergio Paracuellos) - Give pcibios_root_bridge_prepare() access to host bridge windows (Sergio Paracuellos) - Move MIPS I/O coherency unit setup from driver to pcibios_root_bridge_prepare() (Sergio Paracuellos) - Add missing MODULE_LICENSE() (Sergio Paracuellos) - Allow COMPILE_TEST for all arches (Sergio Paracuellos) Microsoft Hyper-V host bridge driver: - Add hv-internal interfaces to encapsulate arch IRQ dependencies (Sunil Muthuswamy) - Add arm64 Hyper-V vPCI support (Sunil Muthuswamy) Qualcomm PCIe controller driver: - Undo PM setup in qcom_pcie_probe() error handling path (Christophe JAILLET) - Use __be16 type to store return value from cpu_to_be16() (Manivannan Sadhasivam) - Constify static dw_pcie_ep_ops (Rikard Falkeborn) Renesas R-Car PCIe controller driver: - Fix aarch32 abort handler so it doesn't check the wrong bus clock before accessing the host controller (Marek Vasut) TI Keystone PCIe controller driver: - Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode DT properties (Kishon Vijay Abraham I) MicroSemi Switchtec management driver: - Add Gen4 automotive device IDs (Kelvin Cao) - Declare state_names[] as static so it's not allocated and initialized for every call (Kelvin Cao) Host controller driver cleanups: - Use of_device_get_match_data(), not of_match_device(), when we only need the device data in altera, artpec6, cadence, designware-plat, dra7xx, keystone, kirin (Fan Fei) - Drop pointless of_device_get_match_data() cast in j721e (Bjorn Helgaas) - Drop redundant struct device * from j721e since struct cdns_pcie already has one (Bjorn Helgaas) - Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4, mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier, xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei) - Fix invalid address space conversions in hisi, spear13xx (Bjorn Helgaas) Miscellaneous: - Sort Intel Device IDs by value (Andy Shevchenko) - Change Capability offsets to hex to match spec (Baruch Siach) - Correct misspellings (Krzysztof Wilczyński) - Terminate statement with semicolon in pci_endpoint_test.c (Ming Wang)" * tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits) PCI: mt7621: Allow COMPILE_TEST for all arches PCI: mt7621: Add missing MODULE_LICENSE() PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare() PCI: Let pcibios_root_bridge_prepare() access bridge->windows PCI: mt7621: Declare mt7621_pci_ops static PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: Add mechanism to turn on subdev regulators PCI: brcmstb: Split brcm_pcie_setup() into two funcs dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map. PCI: brcmstb: Fix function return value handling PCI: brcmstb: Do not use __GENMASK PCI: brcmstb: Declare 'used' as bitmap, not unsigned long PCI: hv: Add arm64 Hyper-V vPCI support PCI: hv: Make the code arch neutral by adding arch specific interfaces PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors x86/PCI: Remove initialization of static variables to false PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum misc: pci_endpoint_test: Terminate statement with semicolon ...
2022-01-13Merge branch 'pci/errors'Bjorn Helgaas1-3/+1
- Add PCI_ERROR_RESPONSE and related definitions for signaling and checking for transaction errors on PCI (Naveen Naidu) - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead of in host controller drivers, when transactions fail on PCI (Naveen Naidu) - Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads (Naveen Naidu) * pci/errors: PCI: xgene: Use PCI_ERROR_RESPONSE to identify config read errors PCI: hv: Use PCI_ERROR_RESPONSE to identify config read errors PCI: keystone: Use PCI_ERROR_RESPONSE to identify config read errors PCI: Use PCI_ERROR_RESPONSE to identify config read errors PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config reads PCI/PME: Use PCI_POSSIBLE_ERROR() to check config reads PCI/DPC: Use PCI_POSSIBLE_ERROR() to check config reads PCI: pciehp: Use PCI_POSSIBLE_ERROR() to check config reads PCI: vmd: Use PCI_POSSIBLE_ERROR() to check config reads PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config reads PCI: rockchip-host: Drop error data fabrication when config read fails PCI: rcar-host: Drop error data fabrication when config read fails PCI: altera: Drop error data fabrication when config read fails PCI: mvebu: Drop error data fabrication when config read fails PCI: aardvark: Drop error data fabrication when config read fails PCI: kirin: Drop error data fabrication when config read fails PCI: histb: Drop error data fabrication when config read fails PCI: exynos: Drop error data fabrication when config read fails PCI: mediatek: Drop error data fabrication when config read fails PCI: iproc: Drop error data fabrication when config read fails PCI: thunder: Drop error data fabrication when config read fails PCI: Drop error data fabrication when config read fails PCI: Use PCI_SET_ERROR_RESPONSE() for disconnected devices PCI: Set error response data when config read fails PCI: Add PCI_ERROR_RESPONSE and related definitions
2022-01-13Merge branch 'remotes/lorenzo/pci/bridge-emul'Bjorn Helgaas1-1/+3
- Make emulated ROM BAR read-only by default (Pali Rohár) - Make some emulated legacy PCI bits read-only for PCIe devices (Pali Rohár) - Update reserved bits in emulated PCIe Capability (Pali Rohár) - Allow drivers to emulate different PCIe Capability versions (Pali Rohár) - Set emulated Capabilities List bit for all PCIe devices, since they must have at least a PCIe Capability (Pali Rohár) * remotes/lorenzo/pci/bridge-emul: PCI: pci-bridge-emul: Set PCI_STATUS_CAP_LIST for PCIe device PCI: pci-bridge-emul: Correctly set PCIe capabilities PCI: pci-bridge-emul: Fix definitions of reserved bits PCI: pci-bridge-emul: Properly mark reserved PCIe bits in PCI config space PCI: pci-bridge-emul: Make expansion ROM Base Address register read-only
2021-12-06PCI: pci-bridge-emul: Correctly set PCIe capabilitiesPali Rohár1-1/+3
Older mvebu hardware provides PCIe Capability structure only in version 1. New mvebu and aardvark hardware provides it in version 2. So do not force version to 2 in pci_bridge_emul_init() and rather allow drivers to set correct version. Drivers need to set version in pcie_conf.cap field without overwriting PCI_CAP_LIST_ID register. Both drivers (mvebu and aardvark) do not provide slot support yet, so do not set PCI_EXP_FLAGS_SLOT flag. Link: https://lore.kernel.org/r/20211124155944.1290-6-pali@kernel.org Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org
2021-12-06PCI: aardvark: Fix checking for MEM resource typePali Rohár1-4/+2
IORESOURCE_MEM_64 is not a resource type but a type flag. Remove incorrect check for type IORESOURCE_MEM_64. Link: https://lore.kernel.org/r/20211125160148.26029-2-kabel@kernel.org Fixes: 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02PCI: aardvark: Disable common PHY when unbinding driverPali Rohár1-0/+3
Disable the PCIe PHY when unbinding driver. This should save some power. Link: https://lore.kernel.org/r/20211130172913.9727-12-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02PCI: aardvark: Disable link training when unbinding driverPali Rohár1-0/+5
Disable link training circuit in driver unbind sequence. We want to leave link training in the same state as it was before the driver was probed. Link: https://lore.kernel.org/r/20211130172913.9727-11-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02PCI: aardvark: Assert PERST# when unbinding driverPali Rohár1-0/+4
Put the PCIe card into reset by asserting PERST# signal when unbinding driver. It doesn't make sense to leave the card working if it can't communicate with the host. This should also save some power. Link: https://lore.kernel.org/r/20211130172913.9727-10-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02PCI: aardvark: Fix memory leak in driver unbindPali Rohár1-0/+3
Free config space for emulated root bridge when unbinding driver to fix memory leak. Do it after disabling and masking all interrupts, since aardvark interrupt handler accesses config space of emulated root bridge. Link: https://lore.kernel.org/r/20211130172913.9727-9-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02PCI: aardvark: Mask all interrupts when unbinding driverPali Rohár1-0/+21
Ensure that no interrupt can be triggered after driver unbind. Link: https://lore.kernel.org/r/20211130172913.9727-8-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02PCI: aardvark: Disable bus mastering when unbinding driverPali Rohár1-0/+6
Ensure that after driver unbind PCIe cards are not able to forward memory and I/O requests in the upstream direction. Link: https://lore.kernel.org/r/20211130172913.9727-7-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02PCI: aardvark: Comment actions in driver remove methodPali Rohár1-0/+2
Add two more comments into the advk_pcie_remove() method. Link: https://lore.kernel.org/r/20211130172913.9727-6-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02PCI: aardvark: Clear all MSIs at setupPali Rohár1-2/+4
We already clear all the other interrupts (ISR0, ISR1, HOST_CTRL_INT). Define a new macro PCIE_MSI_ALL_MASK and do the same clearing for MSIs, to ensure that we don't start receiving spurious interrupts. Use this new mask in advk_pcie_handle_msi(); Link: https://lore.kernel.org/r/20211130172913.9727-5-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02PCI: aardvark: Add support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2 ↵Pali Rohár1-4/+11
registers on emulated bridge PCI aardvark hardware supports access to DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2 configuration registers of PCIe core via PCIE_CORE_PCIEXP_CAP. Export them via emulated software root bridge. Link: https://lore.kernel.org/r/20211130172913.9727-4-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-01Revert "PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge"Marek Behún1-9/+0
This reverts commit 239edf686c14a9ff926dec2f350289ed7adfefe2. 239edf686c14 ("PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge") added support for the Type 1 Expansion ROM BAR at config offset 0x38, based on the register being listed in the Marvell Armada A3720 spec. But the spec doesn't document it at all for RC mode, and there is no ROM in the SOC, so remove this emulation for now. The PCI bridge which represents aardvark's PCIe Root Port has an Expansion ROM Base Address register at offset 0x30, but its meaning is different than PCI's Expansion ROM BAR register, although the layout is the same. (This is why we thought it does the same thing.) First: there is no ROM (or part of BootROM) in the A3720 SOC dedicated for PCIe Root Port (or controller in RC mode) containing executable code that would initialize the Root Port, suitable for execution in bootloader (this is how Expansion ROM BAR is used on x86). Second: in A3720 spec the register (address 0xD0070030) is not documented at all for Root Complex mode, but similar to other BAR registers, it has an "entangled partner" in register 0xD0075920, which does address translation for the BAR in 0xD0070030: - the BAR register sets the address from the view of PCIe bus - the translation register sets the address from the view of the CPU The other BAR registers also have this entangled partner, and they can be used to: - in RC mode: address-checking on the receive side of the RC (they can define address ranges for memory accesses from remote Endpoints to the RC) - in Endpoint mode: allow the remote CPU to access memory on A3720 The Expansion ROM BAR has only the Endpoint part documented, but from the similarities we think that it can also be used in RC mode in that way. So either Expansion ROM BAR has different meaning (if the hypothesis above is true), or we don't know it's meaning (since it is not documented for RC mode). Remove the register from the emulated bridge accessing functions. [bhelgaas: summarize reason for removal (first paragraph)] Fixes: 239edf686c14 ("PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge") Link: https://lore.kernel.org/r/20211125160148.26029-3-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pali Rohár <pali@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-02 16:13:33 +0000