summaryrefslogtreecommitdiffstats
path: root/drivers/pci/controller/dwc
AgeCommit message (Collapse)AuthorFilesLines
2022-08-04Merge branch 'pci/ctrl/qcom'Bjorn Helgaas3-164/+276
- Add PHY clock source implementation (Dmitry Baryshkov) - Use new clk_regmap_phy_mux_ops for gcc-sm8450 and gcc-sc7280 PCIe pipe clocks (Dmitry Baryshkov) - Set up rev 2.1.0 PARF_PHY before enabling clocks (Christian Marangi) - Power on PHY before accessing IPQ8074 DBI registers to avoid boot hangs (Robert Marko) - Power on PHY before accessing DBI registers on all variants for consistency (Robert Marko) - Remove unnecessary pipe_clk handling since this is done in PHY drivers (Dmitry Baryshkov) - Drop manual pipe_clk_src handling (Dmitry Baryshkov) - Move GEN3_RELATED DBI definitions to common dwc header (Baruch Siach) - Define slot capabilities using generic PCI_EXP_SLTCAP_* macros (Baruch Siach) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Fix DT description typo (Baruch Siach) - Fix DT "compatibles" typo (Johan Hovold) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) * pci/ctrl/qcom: PCI: qcom: Allow ASPM L1 and substates for 2.7.0 dt-bindings: PCI: qcom: Fix reset conditional dt-bindings: PCI: qcom: Fix description typo PCI: qcom: Add IPQ60xx support PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_* PCI: dwc: Move GEN3_RELATED DBI definitions to common header PCI: qcom: Drop manual pipe_clk_src handling PCI: qcom: Remove unnecessary pipe_clk handling PCI: qcom: Power on PHY before DBI register accesses PCI: qcom: Power on PHY before IPQ8074 DBI register accesses PCI: qcom: Set up rev 2.1.0 PARF_PHY before enabling clocks clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe clocks clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe clocks clk: qcom: regmap: add PHY clock source implementation
2022-08-04Merge branch 'pci/ctrl/imx6'Bjorn Helgaas1-304/+360
- Factor out ref clock disables to match enables (Bjorn Helgaas) - Collect clock enables in imx6_pcie_clk_enable() (Richard Zhu) - Propagate regulator and clock errors back to .host_init() caller (Richard Zhu) - Disable i.MX6QDL clock when disabling ref clocks (Richard Zhu) - Call host init function directly in resume instead of duplicating the code (Richard Zhu) - Turn off regulators when suspending (Richard Zhu) - Make link being down a non-fatal error so probe doesn't fail (Richard Zhu) - Start link in resume only if it was up before suspend to reduce resume time (Richard Zhu) - Move PHY init and power-on out of clock- and reset-related functions (Richard Zhu) - Rework suspend callback to be more symmetric with resume (Richard Zhu) - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu) - Allow speeds faster than Gen2 (Richard Zhu) * pci/ctrl/imx6: PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
2022-08-04Merge branch 'pci/ctrl/fu740'Bjorn Helgaas1-2/+0
- Remove unnecessary include files (Bjorn Helgaas) * pci/ctrl/fu740: PCI: fu740: Remove unnecessary include files
2022-08-01PCI: imx6: Support more than Gen2 speed link modeRichard Zhu1-4/+4
Support more than Gen2 speed link mode, since i.MX8MP PCIe supports up to Gen3 link speed. Link: https://lore.kernel.org/r/1658287576-26908-1-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registersRichard Zhu1-0/+4
The PCIE_DBI_RO_WR_EN bit should be set when write some DBI registers. To make sure that the DBI registers are writable, set the PCIE_DBI_RO_WR_EN properly when writing the DBI registers. Link: https://lore.kernel.org/r/1652866528-13220-1-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Reformat suspend callback to keep symmetric with resumeRichard Zhu1-25/+37
Create imx6_pcie_stop_link() and imx6_pcie_host_exit() functions. Encapsulate clocks, regulators disables and PHY uninitialization into imx6_pcie_host_exit(). To keep suspend/resume symmetric as much as possible, invoke these two new created functions in suspend callback. To be symmetric with imx6_pcie_host_exit(), move imx6_pcie_clk_enable() to imx6_pcie_host_init() from imx6_pcie_deassert_core_reset(). Link: https://lore.kernel.org/r/1657783869-19194-18-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Move the imx6_pcie_ltssm_disable() earlierRichard Zhu1-19/+19
Move the imx6_pcie_ltssm_disable() earlier and place it just behind the imx6_pcie_ltssm_enable(), since it might not be only used by suspend callback directly. To be symmetric with imx6_pcie_ltssm_enable(), add the IMX6Q and IMX8MQ switch cases in imx6_pcie_ltssm_disable(). Link: https://lore.kernel.org/r/1657783869-19194-17-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Disable clocks in reverse order of enableBjorn Helgaas1-2/+2
imx6_pcie_clk_enable() enables clocks in the order: pcie_phy pcie_bus pcie imx6_pcie_enable_ref_clk Change imx6_pcie_clk_disable() to disable them in the reverse order. Link: https://lore.kernel.org/r/1657783869-19194-16-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01PCI: imx6: Do not hide PHY driver callbacks and refine the error handlingRichard Zhu1-13/+23
Move the phy_power_on() to host_init from imx6_pcie_clk_enable(). Move the phy_init() to host_init from imx6_pcie_deassert_core_reset(). Refine the error handling in imx6_pcie_host_init() accordingly. Link: https://lore.kernel.org/r/1657783869-19194-15-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Reduce resume time by only starting link if it was up before suspendRichard Zhu1-1/+6
i.MX PCIe doesn't support hotplug. During resume, only start PCIe link training when the link was up before system suspend to avoid the long latency in the link training period. Link: https://lore.kernel.org/r/1657783869-19194-14-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Mark the link down as non-fatal errorRichard Zhu1-7/+8
If the PCIe link is down, return zero from imx6_pcie_start_link() so the driver will probe successfully. Link: https://lore.kernel.org/r/1657783869-19194-13-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()Richard Zhu1-20/+16
Move regulator enable out of imx6_pcie_deassert_core_reset(), since the regulator_enable() has nothing to do with imx6_pcie_deassert_core_reset(). Link: https://lore.kernel.org/r/1657783869-19194-12-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Turn off regulator when system is in suspend modeRichard Zhu1-12/+5
The driver should undo any enables it did itself. The regulator disable shouldn't be basing decisions on regulator_is_enabled(). Move the regulator_disable to the suspend function, turn off regulator when the system is in suspend mode. Link: https://lore.kernel.org/r/1657783869-19194-11-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: imx6: Call host init function directly in resumeRichard Zhu1-3/+3
Call imx6_pcie_host_init() instead of duplicating codes in resume. Note that this also means we do MPLL setup again during resume, which we didn't do before. [bhelgaas: add MPLL setup note, pointed out by Lucas] Link: https://lore.kernel.org/r/1657783869-19194-10-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Disable i.MX6QDL clock when disabling ref clocksRichard Zhu1-0/+8
When disabling PCIe clocks, disable i.MX6QDL ref clock too. Link: https://lore.kernel.org/r/1657783869-19194-9-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Propagate .host_init() errors to callerRichard Zhu1-4/+12
Since dw_pcie_host_init() checks for errors from ops->host_init(), check for errors when enabling power regulators and clocks and return them. [bhelgaas: commit log] Link: https://lore.kernel.org/r/1657783869-19194-8-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()Richard Zhu1-39/+56
Encapsulate the i.MX PCIe clock enable operations into one standalone function, imx6_pcie_clk_enable(). No functional change intended. [bhelgaas: split pure code moves into separate patches] Link: https://lore.kernel.org/r/1657783869-19194-7-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Factor out ref clock disable to match enableBjorn Helgaas1-6/+10
The PCIe ref clocks are specific to different variants. The enables are already split out into imx6_pcie_enable_ref_clk(), but the disables were combined with the more generic bus/phy/pcie clock disables in imx6_pcie_clk_disable(). Split out the variant-specific disables into imx6_pcie_disable_ref_clk() to match imx6_pcie_enable_ref_clk(). No functional change intended. Link: https://lore.kernel.org/r/1657783869-19194-6-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01PCI: imx6: Move imx6_pcie_clk_disable() earlierRichard Zhu1-24/+24
Move imx6_pcie_clk_disable() earlier to be near other clock-related functions. No functional change intended. [bhelgaas: reorder patch so pure moves are earlier] Link: https://lore.kernel.org/r/1657783869-19194-5-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01PCI: imx6: Move imx6_pcie_enable_ref_clk() earlierBjorn Helgaas1-48/+48
Move imx6_pcie_enable_ref_clk() earlier so it's not in the middle between imx6_pcie_assert_core_reset() and imx6_pcie_deassert_core_reset(). No functional change intended. Link: https://lore.kernel.org/r/1657783869-19194-4-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01PCI: imx6: Move PHY management functions togetherBjorn Helgaas1-128/+128
Collect imx6_pcie_init_phy(), imx7d_pcie_wait_for_phy_pll_lock(), and imx6_setup_phy_mpll() earlier with other PHY-related code. No functional change intended. Link: https://lore.kernel.org/r/1657783869-19194-3-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlierBjorn Helgaas1-25/+25
Move imx6_pcie_grp_offset() and imx6_pcie_configure_type() earlier in the file since they depend on nothing and are used by several other functions that will be moved earlier. No functional change intended. Link: https://lore.kernel.org/r/1657783869-19194-2-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()Bjorn Helgaas1-4/+2
Replace SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() with NOIRQ_SYSTEM_SLEEP_PM_OPS(), which has the advantage that the compiler always sees the PM callbacks as referenced, so they don't need to be wrapped with "#ifdef CONFIG_PM_SLEEP" or tagged with "__maybe_unused" to avoid "defined but not used" warnings. See 1a3c7bb08826 ("PM: core: Add new *_PM_OPS macros, deprecate old ones"). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2022-08-01PCI: exynos: Correct generic PHY usageMarek Szyprowski1-2/+1
The proper initialization for generic PHYs is to call first phy_init(), then phy_power_on(). While touching this, remove the phy_reset() call. It is just a left-over from the obsoleted Exynos5440 support and the current exynos-pcie PHY driver doesn't even support this function. It is also rarely used by other drivers. Link: https://lore.kernel.org/r/20220628220409.26545-2-m.szyprowski@samsung.com Reported-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Chanho Park <chanho61.park@samsung.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-08-01PCI: dwc: Handle MSIs routed to multiple GIC interruptsDmitry Baryshkov1-3/+58
On some Qualcomm platforms each group of 32 MSI vectors is routed to a separate GIC interrupt. Implement support for such configurations by parsing "msi0" ... "msiX" interrupts and attaching them to the chained handler. Note that if DT doesn't list an array of MSI interrupts and uses a single "msi" IRQ, the driver will limit the number of supported MSI vectors to 32. Link: https://lore.kernel.org/r/20220707134733.2436629-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Convert struct pcie_port.msi_irq to an arrayDmitry Baryshkov7-17/+24
The Qualcomm DWC PCIe controller supports more than 32 MSI interrupts, but they are routed to separate interrupts in groups of 32 vectors. To support this configuration, change the msi_irq field to an array. Let the DWC core handle all interrupts that were set in this array. [bhelgaas: reorder, drop "irq" temporary to make patch cleaner] Link: https://lore.kernel.org/r/20220707134733.2436629-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Split MSI IRQ parsing/allocation to a separate functionDmitry Baryshkov1-42/+54
Split handling of MSI host IRQs to a separate dw_pcie_msi_host_init() function. The code is complex enough to warrant a separate function. [bhelgaas: reorder patch earlier] Link: https://lore.kernel.org/r/20220707134733.2436629-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Correct msi_irq condition in dw_pcie_free_msi()Dmitry Baryshkov1-1/+1
The dwc-based drivers set pp->msi_irq to -ENODEV if they do not want the dwc core to do anything with pp->msi_irq. dw_pcie_host_init() sets the handler and data when "pp->msi_irq > 0", so use the same condition when removing the handler and data in dw_pcie_free_msi(). Link: https://lore.kernel.org/r/20220707134733.2436629-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Use the bitmap API to allocate bitmapsChristophe JAILLET1-8/+4
Use devm_bitmap_zalloc() instead of hand-writing them. It is less verbose and it improves the semantic. Link: https://lore.kernel.org/r/bc6586a603abc0db7d4531308b698fbe7a6d7083.1657375829.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: dwc: Fix MSI msi_msg DMA mappingWill McVicker2-7/+9
As of 07940c369a6b ("PCI: dwc: Fix MSI page leakage in suspend/resume"), the PCIe designware host driver has been using the driver data allocation for the msi_msg DMA mapping which can result in a DMA_MAPPING_ERROR due to the DMA overflow check in dma_direct_map_page() when the address is greater than 32 bits (reported in [1]). The commit was trying to address a memory leak on suspend/resume by moving the MSI mapping to dw_pcie_host_init(), but subsequently dropped the page allocation thinking it wasn't needed. To fix the DMA mapping issue as well as make msi_msg DMA'able, switch back to allocating a 32-bit page for the msi_msg. To avoid the suspend/resume leak, allocate the page in dw_pcie_host_init() since that shouldn't be called during suspend/resume. [1] https://lore.kernel.org/all/Yo0soniFborDl7+C@google.com/ Signed-off-by: Will McVicker <willmcvicker@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-08-01PCI: dwc: Check iATU in/outbound range setup statusSerge Semin4-59/+114
Make the DWC PCIe RC/EP safer and more verbose for invalid or failed inbound and outbound iATU window setups. Silently ignoring iATU regions setup errors may cause unpredictable errors. For instance if a cfg or IO window fails to be activated, then any CFG/IO requested won't reach target PCIe devices and the corresponding accessors will return platform-specific random values. [bhelgaas: trim commit log] Link: https://lore.kernel.org/r/20220624143947.8991-15-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Validate iATU outbound mappings against hardware constraintsSerge Semin2-19/+29
Make __dw_pcie_prog_outbound_atu() check the requested region base and size against what the hardware can support. Return error if the region is not correctly aligned or of a supported size. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-14-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Add iATU regions size detection procedureSerge Semin2-4/+31
The DWC PCIe RC/EP/DM IP core configuration parameters determine the number of inbound and outbound iATU windows, alignment requirements (which is also the minimum window size), minimum and maximum sizes. If internal ATU is enabled, the former settings are determined by CX_ATU_MIN_REGION_SIZE; the latter are determined by CX_ATU_MAX_REGION_SIZE. Determine the required alignment and maximum size supported by the controller and log it to help verify whether the requested inbound or outbound memory mappings can be fully created. Note 1. The extended iATU regions have been supported since DWC PCIe v4.60a. There is no need in testing the upper limit register availability for the older cores. Note 2. The regions alignment is determined with using the fls() method since the lower four bits of the ATU Limit register can be occupied with the Circular Buffer Increment setting, which can be initialized with zeros. Link: https://lore.kernel.org/r/20220624143947.8991-13-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Simplify in/outbound iATU setup methodsSerge Semin3-237/+108
Previously __dw_pcie_prog_outbound_atu() duplicated a lot of code between the iatu_unroll_enabled version and the PCIE_ATU_VIEWPORT version: __dw_pcie_prog_outbound_atu if (iatu_unroll_enabled) dw_pcie_prog_outbound_atu_unroll dw_pcie_writel_ob_unroll(PCIE_ATU_UNR_LOWER_BASE, ...) dw_pcie_writel_ob_unroll(PCIE_ATU_UNR_UPPER_BASE, ...) ... return dw_pcie_writel_dbi(PCIE_ATU_VIEWPORT, ...) dw_pcie_writel_dbi(PCIE_ATU_LOWER_BASE, ...) dw_pcie_writel_dbi(PCIE_ATU_UPPER_BASE, ...) ... Unify those by pushing the unroll address computation and viewport selection down into dw_pcie_writel_atu() so we can use the same dw_pcie_writel_atu_ob() accessor for both paths: __dw_pcie_prog_outbound_atu dw_pcie_writel_atu_ob(PCIE_ATU_LOWER_BASE, ...) dw_pcie_writel_atu dw_pcie_select_atu # new if (iatu_unroll_enabled) return pci->atu_base + PCIE_ATU_UNROLL_BASE(...) dw_pcie_writel_dbi(PCIE_ATU_VIEWPORT, ...) return pci->atu_base dw_pcie_write(base + reg) dw_pcie_writel_atu_ob(PCIE_ATU_UPPER_BASE, ...) ... In the non-unroll case, this does involve more MMIO writes to PCIE_ATU_VIEWPORT, but it's mainly in initialization paths and the code simplification is significant. [bhelgaas: commit log, simplify dw_pcie_select_atu()] Link: https://lore.kernel.org/r/20220624143947.8991-12-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01PCI: dwc: Drop enum dw_pcie_region_type in favor of PCIE_ATU_REGION_DIR_IB/OBSerge Semin4-34/+13
Previously callers of dw_pcie_disable_atu() supplied enum dw_pcie_region_type (DW_PCIE_REGION_INBOUND, DW_PCIE_REGION_OUTBOUND), which dw_pcie_disable_atu() converted to the PCIE_ATU_REGION_DIR_IB or PCIE_ATU_REGION_DIR_OB values needed to program the ATU registers. Simplify the code by dropping the dw_pcie_region_type enum and passing PCIE_ATU_REGION_DIR_IB or PCIE_ATU_REGION_DIR_OB directly. Reorder dw_pcie_disable_atu() arguments to (dir, index) since "index" indicates an ATU window in the regions of the corresponding direction. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-11-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Drop enum dw_pcie_as_type in favor of PCIE_ATU_TYPE_MEM/IOSerge Semin3-50/+15
Previously dw_pcie_ep_set_bar() converted the BAR PCI_BASE_ADDRESS_SPACE bit to the internal dw_pcie_as_type enum (DW_PCIE_AS_MEM, DW_PCIE_AS_IO) and passed it down to dw_pcie_prog_inbound_atu(), which converted the enum to the PCIE_ATU_TYPE_MEM/PCIE_ATU_TYPE_IO values needed to program the ATU registers. Simplify the code by dropping the dw_pcie_as_type enum and passing PCIE_ATU_TYPE_MEM or PCIE_ATU_TYPE_IO directly. Reorder inbound ATU function arguments to match the outbound functions, with address-related parameters at the end. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-10-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Add dw_pcie_ops.host_deinit() callbackSerge Semin2-5/+17
dw_pcie_host_init() calls the dw_pcie_ops.host_init() callback to do platform-specific host initialization. Add a dw_pcie_ops.host_deinit() callback to perform the corresponding cleanups in dw_pcie_host_deinit() and in dw_pcie_host_init() failure paths. Link: https://lore.kernel.org/r/20220624143947.8991-9-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: tegra194: Drop manual DW PCIe controller version setupSerge Semin1-1/+0
Since the DW PCIe common code (dw_pcie_version_detect()) now reads the IP core version directly from the hardware, there is no point manually setting the version for controllers newer than v4.70a. Tegra194 only supports v4.90a, so remove the now-superfluous code that sets struct dw_pcie.version. Suggested-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220624143947.8991-8-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: intel-gw: Drop manual DW PCIe controller version setupSerge Semin1-15/+1
Since the DW PCIe common code (dw_pcie_version_detect()) now reads the IP core version directly from the hardware, there is no point manually setting the version for controllers newer than v4.70a. Remove the now-superfluous intel-gw code that sets struct dw_pcie.version. Suggested-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220624143947.8991-7-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Add macros to compare Synopsys IP core versionsSerge Semin3-5/+20
Add macros to compare DWC IP core versions: dw_pcie_ver_is() dw_pcie_ver_is_ge() dw_pcie_ver_type_is() dw_pcie_ver_type_is_ge() These are along the lines of DWC3_VER_IS() and dw_spi_ver_is(). [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-08-01PCI: dwc: Read DWC IP core version from registerSerge Semin4-0/+34
Since DWC PCIe v4.70a, the controller version and version type can be read from the PORT_LOGIC.PCIE_VERSION_OFF and PORT_LOGIC.PCIE_VERSION_TYPE_OFF registers respectively. Read the version from those registers and warn if if's different from the version we got from the device tree. We can only read the version after platform-specific drivers have done any DBI-related initialization, such as reference clock activation. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Use native DWC IP core version representationSerge Semin5-14/+22
Save the DWC IP core version in the same format as the PORT_LOGIC.PCIE_VERSION_OFF register, similar to what other drivers for DWC IP do (dw_spi_hw_init(), dwc3_core_is_valid(), stmmac_hwif_init()). [bhelgaas: trim commit log] Link: https://lore.kernel.org/r/20220624143947.8991-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Detect iATU settings after getting "addr_space" resourceSerge Semin1-2/+2
Previously, dw_pcie_ep_init() did: dw_pcie_iatu_detect(pci); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space"); if (!res) return -EINVAL; The platform_get_resource_byname() can fail, and dw_pcie_iatu_detect() doesn't depend on the "addr_space" resource, so delay it until afterwards, i.e., platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space"); dw_pcie_iatu_detect(pci); [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Log link speed and width if it comes upSerge Semin1-6/+16
Printing just "link up" isn't very informative for PCI Express. Even if the link is up, bus performance can degrade to slower speeds or to narrower width than both Root Port and its partner is capable of. In that case it would be handy to know the link specifications as early as possible. If the link comes up, log the link speed (PCIe generation) and width. Link: https://lore.kernel.org/r/20220624143947.8991-2-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-07-29PCI: qcom: Allow ASPM L1 and substates for 2.7.0Krishna chaitanya chundru1-0/+8
Allow ASPM L1 and its substates. By default this is disabled in the qcom specific hardware. Enable it explicitly only for controllers belonging to 2_7_0. This does not affect any link capability registers; it will allow the link transitions to L1 and its substates only if they are already supported. Link: https://lore.kernel.org/r/1657886366-32685-1-git-send-email-quic_krichai@quicinc.com Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-07-27PCI: Convert to new *_PM_OPS macrosBjorn Helgaas3-13/+11
Replace SET_*_PM_OPS with *_PM_OPS, which which have the advantage that the compiler always sees the PM callbacks as referenced, so they don't need to be wrapped with "#ifdef CONFIG_PM_SLEEP" or tagged with "__maybe_unused" to avoid "defined but not used" warnings. See 1a3c7bb08826 ("PM: core: Add new *_PM_OPS macros, deprecate old ones"). Link: https://lore.kernel.org/r/20220719215108.1583108-1-helgaas@kernel.org Tested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pali Rohár <pali@kernel.org> # pci-mvebu.c Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2022-07-22PCI: tegra194: Add Tegra234 PCIe supportVidya Sagar1-59/+225
Add support for Synopsys DesignWare core IP based PCIe host controllers present in the Tegra234 SoC. Link: https://lore.kernel.org/r/20220721142052.25971-17-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22PCI: tegra194: Extend Endpoint mode supportVidya Sagar1-0/+9
Since only Controller-5 can be used in the Endpoint mode in P2972-0000 platform, support is available only for Controller-5. Extend that support by enabling the Endpoint mode capable controller during initialization which otherwise is not required if it is only Controller-5. Link: https://lore.kernel.org/r/20220721142052.25971-16-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22PCI: tegra194: Fix link up retry sequenceVidya Sagar1-1/+1
Add the missing DLF capability offset while clearing DL_FEATURE_EXCHANGE_EN bit during link up retry. Link: https://lore.kernel.org/r/20220721142052.25971-15-vidyas@nvidia.com Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22PCI: tegra194: Clean up the exit path for Endpoint modeVidya Sagar1-14/+31
Clean up the exit path during .remove() and .shutdown() calls when in Endpoint mode. Link: https://lore.kernel.org/r/20220721142052.25971-14-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-03-31 14:07:41 +0000