summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/microchip
AgeCommit message (Collapse)AuthorFilesLines
2022-12-25treewide: Convert del_timer*() to timer_shutdown*()Steven Rostedt (Google)1-3/+3
Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-14/+46
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-24wifi: wilc1000: validate number of channelsPhil Turnbull1-6/+16
There is no validation of 'e->no_of_channels' which can trigger an out-of-bounds write in the following 'memset' call. Validate that the number of channels does not extends beyond the size of the channel list element. Signed-off-by: Phil Turnbull <philipturnbull@github.com> Tested-by: Ajay Kathat <ajay.kathat@microchip.com> Acked-by: Ajay Kathat <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221123153543.8568-5-philipturnbull@github.com
2022-11-24wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_CHANNEL_LIST attributePhil Turnbull1-1/+2
Validate that the IEEE80211_P2P_ATTR_CHANNEL_LIST attribute contains enough space for a 'struct wilc_attr_oper_ch'. If the attribute is too small then it can trigger an out-of-bounds write later in the function. 'struct wilc_attr_oper_ch' is variable sized so also check 'attr_len' does not extend beyond the end of 'buf'. Signed-off-by: Phil Turnbull <philipturnbull@github.com> Tested-by: Ajay Kathat <ajay.kathat@microchip.com> Acked-by: Ajay Kathat <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221123153543.8568-4-philipturnbull@github.com
2022-11-24wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_OPER_CHANNEL attributePhil Turnbull1-2/+12
Validate that the IEEE80211_P2P_ATTR_OPER_CHANNEL attribute contains enough space for a 'struct struct wilc_attr_oper_ch'. If the attribute is too small then it triggers an out-of-bounds write later in the function. Signed-off-by: Phil Turnbull <philipturnbull@github.com> Tested-by: Ajay Kathat <ajay.kathat@microchip.com> Acked-by: Ajay Kathat <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221123153543.8568-3-philipturnbull@github.com
2022-11-24wifi: wilc1000: validate pairwise and authentication suite offsetsPhil Turnbull1-5/+16
There is no validation of 'offset' which can trigger an out-of-bounds read when extracting RSN capabilities. Signed-off-by: Phil Turnbull <philipturnbull@github.com> Tested-by: Ajay Kathat <ajay.kathat@microchip.com> Acked-by: Ajay Kathat <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221123153543.8568-2-philipturnbull@github.com
2022-11-01wifi: wilc1000: sdio: fix module autoloadingMichael Walle1-0/+1
There are no SDIO module aliases included in the driver, therefore, module autoloading isn't working. Add the proper MODULE_DEVICE_TABLE(). Cc: stable@vger.kernel.org Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221027171221.491937-1-michael@walle.cc
2022-10-11treewide: use get_random_u32() when possibleJason A. Donenfeld1-1/+1
The prandom_u32() function has been a deprecated inline wrapper around get_random_u32() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. The same also applies to get_random_int(), which is just a wrapper around get_random_u32(). This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Acked-by: Helge Deller <deller@gmx.de> # for parisc Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-09-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni3-8/+47
drivers/net/ethernet/freescale/fec.h 7d650df99d52 ("net: fec: add pm_qos support on imx6q platform") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-02wifi: move from strlcpy with unused retval to strscpyWolfram Sang1-1/+1
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220830201457.7984-2-wsa+renesas@sang-engineering.com
2022-09-02wifi: wilc1000: remove redundant ret variableJinpeng Cui1-3/+2
Return value from cfg80211_rx_mgmt() directly instead of taking this in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220830105505.287564-1-cui.jinpeng2@zte.com.cn
2022-08-30wifi: wilc1000: fix DMA on stack objectsAjay.Kathat@microchip.com3-8/+47
Sometimes 'wilc_sdio_cmd53' is called with addresses pointing to an object on the stack. Use dynamically allocated memory for cmd53 instead of stack address which is not DMA'able. Fixes: 5625f965d764 ("wilc1000: move wilc driver out of staging") Reported-by: Michael Walle <mwalle@kernel.org> Suggested-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Reviewed-by: Michael Walle <mwalle@kernel.org> Tested-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220809075749.62752-1-ajay.kathat@microchip.com
2022-08-26Merge tag 'wireless-next-2022-08-26-v2' of ↵David S. Miller1-7/+10
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes berg says: ==================== Various updates: * rtw88: operation, locking, warning, and code style fixes * rtw89: small updates * cfg80211/mac80211: more EHT/MLO (802.11be, WiFi 7) work * brcmfmac: a couple of fixes * misc cleanups etc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-25wifi: cfg80211: Add link_id parameter to various key operations for MLOVeerendranath Jakkam1-7/+10
Add support for various key operations on MLD by adding new parameter link_id. Pass the link_id received from userspace to driver for add_key, get_key, del_key, set_default_key, set_default_mgmt_key and set_default_beacon_key to support configuring keys specific to each MLO link. Userspace must not specify link ID for MLO pairwise key since it is common for all the MLO links. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-08wifi: wilc1000: fix spurious inline in wilc_handle_disconnect()Kalle Valo2-2/+3
Sparse warns: drivers/net/wireless/microchip/wilc1000/hif.h:218:35: error: marked inline, but without a definition Remove the inline, it's not needed. Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Acked-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220801110440.13144-1-kvalo@kernel.org
2022-07-27wifi: wilc1000: use existing iftype variable to store the interface typeAjay Singh2-4/+3
For consistency, use an existing 'iftype' element which was already having the interface type. Replace 'mode' with 'iftype' as it was used for the same purpose. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220720160302.231516-8-ajay.kathat@microchip.com
2022-07-27wifi: wilc1000: add 'isinit' flag for SDIO bus similar to SPIAjay Singh4-3/+28
Similar to SPI priv data, add 'isinit' variable in SDIO priv. Make use of the state to invoke hif_init() once, and acquire the lock before accessing hif function. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220720160302.231516-7-ajay.kathat@microchip.com
2022-07-27wifi: wilc1000: cancel the connect operation during interface downAjay Singh3-4/+4
Cancel the ongoing connection request to avoid any issue if the interface is set down before the connection request is completed. host_int_handle_disconnect was already available, so renamed it and used the same API for 'ndio_close' cb. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220720160302.231516-6-ajay.kathat@microchip.com
2022-07-27wifi: wilc1000: get correct length of string WID from received config packetAjay Singh1-2/+3
For string type WID packet, the data length is received as 16-bit value so use 'get_unaligned_le16' conversion API to extract the correct length. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220720160302.231516-5-ajay.kathat@microchip.com
2022-07-27wifi: wilc1000: set station_info flag only when signal value is validAjay Singh1-2/+1
Set station_info->filled to indicate signal level only when its value is received successfully using wilc_get_rssi(). Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220720160302.231516-4-ajay.kathat@microchip.com
2022-07-27wifi: wilc1000: set correct value of 'close' variable in failure caseAjay Singh1-1/+1
Set 'close' variable to '1' to indicate closing operation when initialisation fails during wlan_initialize_threads() call. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220720160302.231516-3-ajay.kathat@microchip.com
2022-07-27wifi: wilc1000: add WID_TX_POWER WID in g_cfg_byte arrayAjay Singh1-0/+1
WID_TX_POWER WID value is fetched from the firmware so it should be added in'g_cfg_byte' array to store the data which is received from firmware. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220720160302.231516-2-ajay.kathat@microchip.com
2022-07-15wifi: cfg80211/mac80211: separate link params from station paramsShaul Triebitz1-9/+11
Put the link_station_parameters structure in the station_parameters structure (and remove the station_parameters fields already existing in link_station_parameters). Now, for an MLD station, the default link is added together with the station. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: cfg80211: do some rework towards MLO link APIsJohannes Berg1-1/+2
In order to support multi-link operation with multiple links, start adding some APIs. The notable addition here is to have the link ID in a new nl80211 attribute, that will be used to differentiate the links in many nl80211 operations. So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID attribute (as well as the NL80211_ATTR_MLO_LINKS attribute) and plugs it through the system in some places, checking the validity etc. along with other infrastructure needed for it. For now, I've decided to include only the over-the-air link ID in the API. I know we discussed that we eventually need to have to have other ways of identifying a link, but for local AP mode and auth/assoc commands as well as set_key etc. we'll use the OTA ID. Also included in this patch is some refactoring of the data structures in struct wireless_dev, splitting for the first time the data into type dependent pieces, to make reasoning about these things easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-30wifi: wilc1000: add IGTK supportAjay Singh6-23/+171
Add support to handle IGTK keys which are required for MFP to FW. Index ID 4 and 5 are used to store the IGTK key. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220524120606.9675-4-ajay.kathat@microchip.com
2022-05-30wifi: wilc1000: add WPA3 SAE supportAjay Singh9-14/+133
Enable SAE authentication for AP and STA mode. In STA mode, allow the driver to pass the auth frames which are received from firmware to userspace application(hostapd) so that SAE authentication is offloaded to userspace. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220524120606.9675-3-ajay.kathat@microchip.com
2022-05-30wifi: wilc1000: remove WEP security supportAjay Singh5-198/+2
Deprecated WEP security for WILC driver as well as in firmware from 15.6 FW release onwards. After WEP security removal, freeup some codespace which helped to add new features like WPA3 etc. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220524120606.9675-2-ajay.kathat@microchip.com
2022-05-30wifi: wilc1000: use correct sequence of RESET for chip Power-UP/DownAjay Singh1-3/+3
For power-up sequence, WILC expects RESET set to high 5ms after making chip_en(enable) so corrected chip power-up sequence by making RESET high. For Power-Down sequence, the correct sequence make RESET and CHIP_EN low without any extra delay. Fixes: ec031ac4792c ("wilc1000: Add reset/enable GPIO support to SPI driver") Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220524120606.9675-1-ajay.kathat@microchip.com
2022-05-11wilc1000: add valid vmm_entry check before fetching from TX queueAjay Singh1-3/+4
'vmm_table' array contains the size of data buffer length including host header length. In 'vmm_table' array, the Zero value means the end of vmm_entries that needs to transfer to firmware which is calculated based on VMM free size in firmware. Use 'vmm_table' valid entry check before fetching the entry from TX queue to only copy valid number of entries to avoid possible NULL pointer exception observed sometimes during large file transfers. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504161924.2146601-5-ajay.kathat@microchip.com
2022-05-11wilc1000: use 'u64' datatype for cookie variableAjay Singh1-1/+1
Use 'u64' instead of 'u32' for the cookie variable as expected by cfg80211 callback function argument. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504161924.2146601-4-ajay.kathat@microchip.com
2022-05-11wilc1000: fix crash observed in AP mode with cfg80211_register_netdevice()Ajay Singh1-2/+2
Monitor(mon.) interface is used for handling the AP mode and 'ieee80211_ptr' reference is not getting set for it. Like earlier implementation, use register_netdevice() instead of cfg80211_register_netdevice() which expects valid 'ieee80211_ptr' reference to avoid the possible crash. Fixes: 2fe8ef106238 ("cfg80211: change netdev registration/unregistration semantics") Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504161924.2146601-3-ajay.kathat@microchip.com
2022-05-11wilc1000: use fixed function base register value to access SDIO_FBR_ENABLE_CSAAjay Singh1-1/+1
The function number was not correct(reset to 0) when host resumes from suspend state. Use hardcoded value in function base information register(FBR base address) to re-initialize correctly on host resume. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504161924.2146601-2-ajay.kathat@microchip.com
2022-05-11wilc1000: increase firmware version array sizeAjay Singh1-1/+2
Increase firmware version array size to hold complete version information. The firmware commit id(Build:) information is also part of the firmware version string. Firmware version format: WILC_WIFI_FW_REL_XX_XX Build: XXXXX e.g. WILC_WIFI_FW_REL_15_6 Build: 12804 Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504161924.2146601-1-ajay.kathat@microchip.com
2022-02-28Merge tag 'spi-remove-void' of ↵Jakub Kicinski1-3/+1
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Mark Brown says: ==================== spi: Make remove() return void This series from Uwe Kleine-König converts the spi remove function to return void since there is nothing useful that we can do with a failure and it as more buses are converted it'll enable further work on the driver core. ==================== Link: https://lore.kernel.org/r/20220228173957.1262628-2-broonie@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-09spi: make remove callback a void functionUwe Kleine-König1-3/+1
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-31wilc1000: use min_t() to make code cleanerChangcheng Deng1-4/+1
Use min_t() in order to make code cleaner. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211222070815.483009-1-deng.changcheng@zte.com.cn
2021-12-22wilc1000: Add reset/enable GPIO support to SPI driverDavid Mosberger-Tang2-4/+60
For the SDIO driver, the RESET/ENABLE pins of WILC1000 are controlled through the SDIO power sequence driver. This commit adds analogous support for the SPI driver. Specifically, during initialization, the chip will be ENABLEd and taken out of RESET and during deinitialization, the chip will be placed back into RESET and disabled (both to reduce power consumption and to ensure the WiFi radio is off). Both RESET and ENABLE GPIOs are optional. However, if the ENABLE GPIO is specified, then the RESET GPIO should normally also be specified as otherwise there is no way to ensure proper timing of the ENABLE/RESET sequence. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211221212531.4011609-2-davidm@egauge.net
2021-12-22wilc1000: Convert static "chipid" variable to device-local variableDavid Mosberger-Tang2-14/+14
Move "chipid" variable into the per-driver structure so the code doesn't break if more than one wilc1000 module is present. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211221210538.4011227-1-davidm@egauge.net
2021-12-20wilc1000: fix double free error in probe()Dan Carpenter3-1/+4
Smatch complains that there is a double free in probe: drivers/net/wireless/microchip/wilc1000/spi.c:186 wilc_bus_probe() error: double free of 'spi_priv' drivers/net/wireless/microchip/wilc1000/sdio.c:163 wilc_sdio_probe() error: double free of 'sdio_priv' The problem is that wilc_netdev_cleanup() function frees "wilc->bus_data". That's confusing and a layering violation. Leave the frees in probe(), delete the free in wilc_netdev_cleanup(), and add some new frees to the remove() functions. Fixes: dc8b338f3bcd ("wilc1000: use goto labels on error path") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211217150311.GC16611@kili
2021-12-16wilc1000: Improve WILC TX performance when power_save is offDavid Mosberger-Tang3-2/+6
The wakeup and sleep commands need to be sent to the WILC chip only when it is in power save mode (PSM, as controlled by "iw dev wlan0 set power_save on/off"). The commands are relatively costly, so it pays to skip them when possible. iperf3 without this patch (no significant different with PSM on/off): TX 0.00-120.01 sec 140 MBytes 9.82 Mbits/sec RX 0.00-120.69 sec 283 MBytes 19.6 Mbits/sec with this patch applied: PSM off (TX is 46% improved, RX slightly improved; may not be significant): TX 0.00-120.00 sec 206 MBytes 14.4 Mbits/sec RX 0.00-120.48 sec 322 MBytes 22.4 Mbits/sec PSM on (no significant change): TX 0.00-120.00 sec 140 MBytes 9.78 Mbits/sec RX 0.00-120.08 sec 257 MBytes 18.0 Mbits/sec Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211210203016.3680425-2-davidm@egauge.net
2021-12-14wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"David Mosberger-Tang2-11/+14
This follows normal Linux convention and is more useful since the new name will make it apparent which network device the work-queue is for (e.g., the name will be "wlan0-wq" for network device "wlan0"). hif_workqueue allocation has to move from cfg80211.c:wilc_cfg80211_init() to netdev.c:wilc_netdev_ifc_init() because the network device name is not known until after the netdev is registered. The move also makes sense because netdev.c is already responsible for destroying the work queue when it is no longer needed. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209044411.3482259-5-davidm@egauge.net
2021-12-14wilc1000: Rename tx task from "K_TXQ_TASK" to NETDEV-txDavid Mosberger-Tang1-1/+1
This follows normal Linux conventions and is also more useful because the netdevice name is part of the task name (e.g., "wlan0-tx" for network device "wlan0"). Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209044411.3482259-4-davidm@egauge.net
2021-12-14wilc1000: Rename irq handler from "WILC_IRQ" to netdev nameDavid Mosberger-Tang1-1/+1
This change follows normal Linux convention and the new name is more useful since it'll be clear which irq handler statistics correspond to which net device. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209044411.3482259-3-davidm@egauge.net
2021-12-14wilc1000: Rename SPI driver from "WILC_SPI" to "wilc1000_spi"David Mosberger-Tang2-3/+3
The name "wilc1000_spi" follows normal Linux conventions and also is analogous to the SDIO driver, which uses "wilc1000_sdio". Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209044411.3482259-2-davidm@egauge.net
2021-12-14wilc1000: Fix spurious "FW not responding" errorDavid Mosberger-Tang1-1/+2
When deinitializing the driver, one or more "FW not responding" error appears on the console. This appears to be due to wilc_wlan_stop() disabling host/WILC1000 communication, but then right afterwards, it tries to release the bus with chip-sleep enabled. The problem is enabling the chip-sleep cannot success once host/WILC1000 communication is disabled. Fix by only releasing the bus. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211208062747.3405221-1-davidm@egauge.net
2021-12-14wilc1000: Remove misleading USE_SPI_DMA macroDavid Mosberger-Tang1-5/+0
The USE_SPI_DMA macro name suggests that it could be set to 1 to control whether or not SPI DMA should be used. However, that's not what it does. If set to 1, it'll set the SPI messages' "is_dma_mapped" flag to true, even though the tx/rx buffers aren't actually DMA mapped by the driver. In other words, setting this flag to 1 will break the driver. Best to clean up this confusion by removing the macro altogether. There is no need to explicitly initialize "is_dma_mapped" because the message is cleared to zero anyhow, so "is_dma_mapped" is set to false by default. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Acked-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211207002453.3193737-1-davidm@egauge.net
2021-12-14wilc1000: Fix missing newline in error messageDavid Mosberger-Tang1-1/+1
Add missing newline in pr_err() message. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211206232709.3192856-3-davidm@egauge.net
2021-12-14wilc1000: Fix copy-and-paste typo in wilc_set_mac_addressDavid Mosberger-Tang1-1/+1
The messages appears to have been copied from wilc_get_mac_address and says "get" when it should say "set". Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211206232709.3192856-2-davidm@egauge.net
2021-12-08wilc1000: Add id_table to spi_driverDavid Mosberger-Tang1-0/+7
This eliminates warning message: SPI driver WILC_SPI has no spi_device_id for microchip,wilc1000 and makes device-tree autoloading work. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211202045001.2901903-1-davidm@egauge.net
2021-12-07Merge tag 'wireless-drivers-next-2021-12-07' of ↵Jakub Kicinski1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.17 First set of patches for v5.17. The biggest change is the iwlmei driver for Intel's AMT devices. Also now WCN6855 support in ath11k should be usable. Major changes: ath10k * fetch (pre-)calibration data via nvmem subsystem ath11k * enable 802.11 power save mode in station mode for qca6390 and wcn6855 * trace log support * proper board file detection for WCN6855 based on PCI ids * BSS color change support rtw88 * add debugfs file to force lowest basic rate * add quirk to disable PCI ASPM on HP 250 G7 Notebook PC mwifiex * add quirk to disable deep sleep with certain hardware revision in Surface Book 2 devices iwlwifi * add iwlmei driver for co-operating with Intel's Active Management Technology (AMT) devices * tag 'wireless-drivers-next-2021-12-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (87 commits) iwlwifi: mei: fix linking when tracing is not enabled rtlwifi: rtl8192de: Style clean-ups mwl8k: Use named struct for memcpy() region intersil: Use struct_group() for memcpy() region libertas_tf: Use struct_group() for memcpy() region libertas: Use struct_group() for memcpy() region wlcore: no need to initialise statics to false rsi: Fix out-of-bounds read in rsi_read_pkt() rsi: Fix use-after-free in rsi_rx_done_handler() brcmfmac: Configure keep-alive packet on suspend wilc1000: remove '-Wunused-but-set-variable' warning in chip_wakeup() iwlwifi: mvm: read the rfkill state and feed it to iwlmei iwlwifi: mvm: add vendor commands needed for iwlmei iwlwifi: integrate with iwlmei iwlwifi: mei: add debugfs hooks iwlwifi: mei: add the driver to allow cooperation with CSME mei: bus: add client dma interface mwifiex: Ignore BTCOEX events from the 88W8897 firmware mwifiex: Ensure the version string from the firmware is 0-terminated mwifiex: Add quirk to disable deep sleep with certain hardware revision ... ==================== Link: https://lore.kernel.org/r/20211207144211.A9949C341C1@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-06-18 12:08:50 +0000