summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
AgeCommit message (Collapse)AuthorFilesLines
2019-11-15iwlwifi: scan: create function for scan scheduling paramsTova Mussai1-23/+38
In the next patch, this code will be used from different places. As preparation export this code into function. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-05Merge tag 'wireless-drivers-next-2019-11-05' of ↵David S. Miller1-14/+6
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.5 First set of patches for 5.5. The most active driver here clearly is rtw88, lots of patches for it. More quiet on other drivers, smaller fixes and cleanups all over. This pull request also has a trivial conflict, the report and example resolution here: https://lkml.kernel.org/r/20191031111242.50ab1eca@canb.auug.org.au Major changes: rtw88 * add deep power save support * add mac80211 software tx queue (wake_tx_queue) support * enable hardware rate control * add TX-AMSDU support * add NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 support * add power tracking support * add 802.11ac beamformee support * add set_bitrate_mask support * add phy_info debugfs to show Tx/Rx physical status * add RFE type 3 support for 8822b ath10k * add support for hardware rfkill on devices where firmware supports it rtl8xxxu * add bluetooth co-existence support for single antenna iwlwifi * Revamp the debugging infrastructure ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30iwlwifi: fw api: support new API for scan config cmdAyala Beker1-8/+32
The API was reduced to include only knowledge currently needed by the FW scan logic, the rest is legacy. Support the new, reduced version. Using the old API with newer firmwares (starting from iwlwifi-*-50.ucode, which implements and requires the new API version) causes an assertion failure similar to this one: [ 2.854505] iwlwifi 0000:00:14.3: 0x20000038 | BAD_COMMAND Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-25iwlwifi: mvm: create function to convert nl80211 band to phy bandTova Mussai1-14/+6
Create the function and use it. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg_ini: remove apply point, switch to time point APIShahar S Matityahu1-2/+0
Remove the "apply points" mechanism as preparation for the changed debug API where this is now a "time point" instead. Use a new API across the code at the trigger points ("time points"), but don't yet implement it since that requires some more preparation. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg_ini: separate cfg and dump flows to different modulesShahar S Matityahu1-1/+1
separate configuration flows and dump collection flows. make ini configuration flows be in iwl-dbg-tlv.c and dump related flows in dbg.c to better reflect their logical difference. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: scan: don't pass large argument by valueAyala Beker1-7/+8
Function iwl_mvm_scan_set_legacy_probe_req() second argument size is too large to be passed by value. Fix it to be passed by reference. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: scan: add support for new scan request command versionAyala Beker1-24/+62
Scan API was changed to support 6Ghz channels as well. Support the new version. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: remove all the d0i3 referencesEmmanuel Grumbach1-7/+0
As part of the d0i3 removal. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: mvm: fix scan config command sizeBeker Ayala1-1/+1
Use the actual length of channels array and not the max capable length. Signed-off-by: Beker Ayala <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: fw api: support adwell HB default APs number apiShahar S Matityahu1-3/+9
Support adaptive dwell high band default number of APs new api. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: mvm: be more forgiving if num of channels is too bigShaul Triebitz1-10/+15
If number of channels in the driver is greater than number of scan channels given by firmware TLV, do not fail scan config, but adjust to firmware's number of channels. This is helpful for supporting in driver new channels before it being supported by firmware scan. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwiwifi: mvm: Fix FW scan concurrency support assumptionsIlan Peer1-2/+7
- The FW supports up to 4 concurrent scans, so adjust the definitions accordingly. - Only a single periodic scan is supported, so enforce it in the code. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-04iwlwifi: mvm: add fall through comments where neededLuca Coelho1-3/+3
Some switch-cases were missing a fall through comment, so the compiler may warn. Fix that by adding the comments where needed. In other cases there was more text in the comment, which the compiler doesn't recognize, so either remove the extra text or move it to a separate comment line as appropriate. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-04iwlwifi: mvm: simplify some return conditionsSara Sharon1-3/+2
Simplify some return conditions found by running a semantic patch to detect unnecessary assignments to local variables. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: mvm: activate apply pointsSara Sharon1-0/+2
Call the previously introduced apply points entry point when reaching an apply point. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11iwlwifi: mvm: switch management tx antenna only on tx failureAvraham Stern1-3/+1
Switch the antenna used for management tx only if previous tx failed. If previous tx succeeded, there is no reason to switch antennas. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-08iwlwifi: mvm: use fast balance scan in case of DCM mode with P2P GOAyala Beker1-23/+68
Currently in case of DCM with P2P GO where BSS DTIM interval < 220 msec the fw fails to allocate events for the P2P GO dtim due to long passive scan events. Fix this by requesting all scans in this scenario to be fragmented with fast balance scan time settings. The only exception is in case fragmented scan was planned to be set due to low latency or high throughput reason, set the scan timing as planned. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-08iwlwifi: mvm: introduce a new fragmented scan type: fast balanceAyala Beker1-7/+17
Fast balance scan is similar to SCAN_TYPE_MILD, but this scan is fragmented and has shorter out of operating channel time, and therefore better match low latency scenarios. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-06iwlwifi: mvm: allow channel reorder optimization during scanAyala Beker1-0/+3
Allow the FW to reorder HB channels and first scan HB channels with assumed APs, in order to reduce the scan duration. Currently enable it for all scan requests types. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: activate fragmented EBS in case of fragmented scanAyala Beker1-1/+11
In case of fragmented scan on the HB channels, configure EBS to be fragmented as well. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: remove all occurrences of the FSF address paragraphLuca Coelho1-3/+0
The Free Software Foundation address is superfluous and causes checkpatch to issue a warning when present. Remove all paragraphs with FSF's address to prevent that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: skip EBS in low latency mode while fragmented scan isn't supportedAyala Beker1-1/+10
While associated in low latency mode, or when traffic load is high, don't enable EBS in scan request if fragmented EBS is not supported by the FW. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-20iwlwifi: mvm: fix OOC priority in scansLuca Coelho1-0/+5
The code that sets the correct out-of-channel priority depending on the scan type was accidentally removed during a rebase. Add it back. Fixes: c1a7515393e4 ("iwlwifi: mvm: add adaptive dwell support") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: clean up scan capability checksJohannes Berg1-7/+8
Introduce and use iwl_mvm_cdb_scan_api(), which checks the family. Most of this will go away once the 22000 firmware supports adaptive dwell, after which the V6 scan API won't be used, but the V3 scan *config* API will still need to be distinguished. In any case, this gets rid of the completely bogus has_new_tx_api() checks. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: detect low latency and traffic load per bandSara Sharon1-42/+125
Detect low latency and traffic load per band. Add support for deciding on scan type and timings per band. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: use TCM data to decide scan priorityLuca Coelho1-1/+1
The code for changing the scan priority is already implemented, but isn't yet in use. Now that TCM data is available, we can base the scan priority decision on the traffic load. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: add traffic condition monitoring (TCM)Luca Coelho1-6/+5
Traffic condition monitor gathers data about the traffic load and other conditions and can be used to make decisions regarding latency, throughput etc. This patch introduces the code and data structures to collect this data for future use. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: fw api: support the new scan request FW API versionAyala Beker1-36/+78
Remove fragmented_dwell_time and add num_of_fragments to support the new API version. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: add support for oceZamir, Roee1-1/+20
Add support for Optimized Connectivity Experience (OCE). Get capabilities from the fw, expose them with nl80211, and enable them in UMAC scan if the relevant nl80211 flags are set by the userspace. Signed-off-by: Roee Zamir <roee.zamir@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: add adaptive dwell supportZamir, Roee1-33/+65
Update the scan command API with support for adaptive dwell. Adaptive dwell is a type of scan that dynamically changes the time it remains on each channel listening for beacons or probe responses. Signed-off-by: Roee Zamir <roee.zamir@intel.com> Signed-off-by: Beni Lev <beni.lev@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-05iwlwifi: mvm: add WFA vendor specific TPC report IE to probe requestAvraham Stern1-3/+32
Add the WFA vendor specific TPC report IE to probe requests when it is not added by the FW. The FW will still need to set the tx power field. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-15iwlwifi: mvm: support version 7 of the SCAN_REQ_UMAC FW commandLuca Coelho1-21/+65
Newer firmware versions (such as iwlwifi-8000C-34.ucode) have introduced an API change in the SCAN_REQ_UMAC command that is not backwards compatible. The driver needs to detect and use the new API format when the firmware reports it, otherwise the scan command will not work properly, causing a command timeout. Fix this by adding a TLV that tells the driver that the new API is in use and use the correct structures for it. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=197591 Fixes: d7a5b3e9e42e ("iwlwifi: mvm: bump API to 34 for 8000 and up") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-09-08iwlwifi: mvm: set status before calling iwl_mvm_send_cmd_status()Luca Coelho1-1/+1
We always must set the status to what we consider success before calling iwl_mvm_send_cmd_status() (also iwl_mvm_send_cmd_pdu_status() which calls it). Fix a few places where initialization is missing. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-01iwlwifi: mvm: add compile-time option to disable EBSZamir, Roee1-1/+1
For testing purposes, we may want to disable EBS scans at compile time. Signed-off-by: Roee Zamir <roee.zamir@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-01iwlwifi: reorganize firmware APIJohannes Berg1-1/+1
Apart from DVM, all firmware uses the same base API, and there's code outside iwlmvm that needs to interact with it. Reflect this in the source better and reorganize the firmware API to a new fw/api/ directory. While at it, split the already pretty large fw-api.h file into a number of smaller files, going from almost 3k lines in there to a maximum number of lines less than 1k. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-29iwlwifi: unify external & internal modparam namesJohannes Berg1-2/+2
Where possible (all except for "11n_disable", which isn't valid in C) rename the internal names for module parameters to be the same as the externally visible names, to aid finding their use etc. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-05iwlwifi: mvm: use schedule_delayed_work()Johannes Berg1-2/+2
There's no need to refer to system_wq directly, use the provided wrapper schedule_delayed_work(). Made with the following spatch: @@ expression E,F; @@ -queue_delayed_work(system_wq, E, F); +schedule_delayed_work(E, F); Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: mvm: use defines instead of variables for shared dwell timesSara Sharon1-35/+20
Most of the dwells are constant across different scan types. Use defines instead of depending on scan type. This is needed as preparation to having different scan type per band. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: mvm: scan: avoid "big" printsMordechai Goodstein1-27/+4
Delete the scanned channel results. No need in it we get it any way when logging. The print only clogs up the ftrace print buffer. Signed-off-by: Mordechai Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-19iwlwifi: mvm: remove unnecessary debugging from UMAC scanLuca Coelho1-4/+1
There are several occasions where a scan of the same type is requested concurrently, so logging every time this happens is just noisy and unnecessary. Remove the logging for these cases. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-19iwlwifi: mvm: use same scan API for all a000 devicesSara Sharon1-36/+44
API will be the same regardless of FW compilation. CDB related values will be filled in only for CDB. Cahneg code and names accordingly. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-02-03iwlwifi: mvm: support new scan APISara Sharon1-66/+162
For CDB devices we will want to configure scan parameters per band. Support the new scan API for now. Logic per band will be added in the future. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-02-03iwlwifi: mvm: cleanup incorrect and redundant defineSara Sharon1-1/+1
Currently we have up to 3 phy contexts - defined by NUM_PHY_CTX. However - some code paths validate the ID by using MAX_PHYS define which is set to 4. While there is no harm it is incorrect - since the maximum is 3. Remove the define and use the correct one. Cleanup the code a bit while at it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-10-19iwlwifi: mvm: fix netdetect starting/stopping for unified imagesLuca Coelho1-6/+27
With unified images, we need to make sure the net-detect scan is stopped after resuming, since we don't restart the FW. Also, we need to make sure we check if there are enough scan slots available to run it, as we do with other scans. Fixes: commit 23ae61282b88 ("iwlwifi: mvm: Do not switch to D3 image on suspend") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26iwlwifi: remove support for fw older than -17 and -22Luca Coelho1-23/+4
FW versions older than -17 for 3160 and 7260 and older than -22 for newer NICs are not supported anymore. Don't load these versions and remove code that handles them. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: Add support for RRM by scanAvrahams Stern1-6/+55
Implement support for RRM by adding an option to configure the scan dwell time and reporting scan start time and BSS detection time, and Advertise support for these features. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-14Merge tag 'wireless-drivers-next-for-davem-2016-07-13' of ↵David S. Miller1-8/+10
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.8 Major changes: iwlwifi * more work on the RX path for the 9000 device series * some more dynamic queue allocation work * SAR BIOS implementation * some work on debugging capabilities * added support for GCMP encryption * data path rework in preparation for new HW * some cleanup to remove transport dependency on mac80211 * support for MSIx in preparation for new HW * lots of work in preparation for HW support (9000 and a000 series) mwifiex * implement get_tx_power and get_antenna cfg80211 operation callbacks wl18xx * add support for 64bit clock rtl8xxxu * aggregation support (optional for now) Also wireless-drivers is merged to fix some conflicts. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-06mac80211: Add support for beacon report radio measurementAvraham Stern1-8/+29
Add the following to support beacon report radio measurement with the measurement mode field set to passive or active: 1. Propagate the required scan duration to the device 2. Report the scan start time (in terms of TSF) 3. Report each BSS's detection time (also in terms of TSF) TSF times refer to the BSS that the interface that requested the scan is connected to. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> [changed ath9k/10k, at76c59x-usb, iwlegacy, wl1251 and wlcore to match the new API] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-05-07 17:45:43 +0000