summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath9k/wmi.c
AgeCommit message (Collapse)AuthorFilesLines
2021-12-20ath9k_htc: fix NULL pointer dereference at ath9k_htc_tx_get_packet()Tetsuo Handa1-0/+4
syzbot is reporting lockdep warning at ath9k_wmi_event_tasklet() followed by kernel panic at get_htc_epid_queue() from ath9k_htc_tx_get_packet() from ath9k_htc_txstatus() [1], for ath9k_wmi_event_tasklet(WMI_TXSTATUS_EVENTID) depends on spin_lock_init() from ath9k_init_priv() being already completed. Since ath9k_wmi_event_tasklet() is set by ath9k_init_wmi() from ath9k_htc_probe_device(), it is possible that ath9k_wmi_event_tasklet() is called via tasklet interrupt before spin_lock_init() from ath9k_init_priv() from ath9k_init_device() from ath9k_htc_probe_device() is called. Let's hold ath9k_wmi_event_tasklet(WMI_TXSTATUS_EVENTID) no-op until ath9k_tx_init() completes. Link: https://syzkaller.appspot.com/bug?extid=31d54c60c5b254d6f75b [1] Reported-by: syzbot <syzbot+31d54c60c5b254d6f75b@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: syzbot <syzbot+31d54c60c5b254d6f75b@syzkaller.appspotmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/77b76ac8-2bee-6444-d26c-8c30858b8daa@i-love.sakura.ne.jp
2020-08-27ath9k: convert tasklets to use new tasklet_setup() APIAllen Pais1-4/+3
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200817090637.26887-3-allen.cryptic@gmail.com
2020-08-14ath9k: Fix typo in function namePavel Machek1-1/+1
Typo "destoy" made me wonder if correct patch is wrong; fix it. No functional change. Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200724083910.GA31930@amd
2020-04-07ath9k: Fix use-after-free Read in ath9k_wmi_ctrl_rxQiujun Huang1-1/+4
Free wmi later after cmd urb has been killed, as urb cb will access wmi. the case reported by syzbot: https://lore.kernel.org/linux-usb/0000000000000002fc05a1d61a68@google.com BUG: KASAN: use-after-free in ath9k_wmi_ctrl_rx+0x416/0x500 drivers/net/wireless/ath/ath9k/wmi.c:215 Read of size 1 at addr ffff8881cef1417c by task swapper/1/0 Call Trace: <IRQ> ath9k_wmi_ctrl_rx+0x416/0x500 drivers/net/wireless/ath/ath9k/wmi.c:215 ath9k_htc_rx_msg+0x2da/0xaf0 drivers/net/wireless/ath/ath9k/htc_hst.c:459 ath9k_hif_usb_reg_in_cb+0x1ba/0x630 drivers/net/wireless/ath/ath9k/hif_usb.c:718 __usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 Reported-and-tested-by: syzbot+5d338854440137ea0fef@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200404041838.10426-3-hqjagain@gmail.com
2020-04-07ath9k: Fix use-after-free Read in htc_connect_serviceQiujun Huang1-1/+0
The skb is consumed by htc_send_epid, so it needn't release again. The case reported by syzbot: https://lore.kernel.org/linux-usb/000000000000590f6b05a1c05d15@google.com usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 usb 1-1: Service connection timeout for: 256 ================================================================== BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:26 [inline] BUG: KASAN: use-after-free in refcount_read include/linux/refcount.h:134 [inline] BUG: KASAN: use-after-free in skb_unref include/linux/skbuff.h:1042 [inline] BUG: KASAN: use-after-free in kfree_skb+0x32/0x3d0 net/core/skbuff.c:692 Read of size 4 at addr ffff8881d0957994 by task kworker/1:2/83 Call Trace: kfree_skb+0x32/0x3d0 net/core/skbuff.c:692 htc_connect_service.cold+0xa9/0x109 drivers/net/wireless/ath/ath9k/htc_hst.c:282 ath9k_wmi_connect+0xd2/0x1a0 drivers/net/wireless/ath/ath9k/wmi.c:265 ath9k_init_htc_services.constprop.0+0xb4/0x650 drivers/net/wireless/ath/ath9k/htc_drv_init.c:146 ath9k_htc_probe_device+0x25a/0x1d80 drivers/net/wireless/ath/ath9k/htc_drv_init.c:959 ath9k_htc_hw_init+0x31/0x60 drivers/net/wireless/ath/ath9k/htc_hst.c:501 ath9k_hif_usb_firmware_cb+0x26b/0x500 drivers/net/wireless/ath/ath9k/hif_usb.c:1187 request_firmware_work_func+0x126/0x242 drivers/base/firmware_loader/main.c:976 process_one_work+0x94b/0x1620 kernel/workqueue.c:2264 worker_thread+0x96/0xe20 kernel/workqueue.c:2410 kthread+0x318/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Allocated by task 83: kmem_cache_alloc_node+0xdc/0x330 mm/slub.c:2814 __alloc_skb+0xba/0x5a0 net/core/skbuff.c:198 alloc_skb include/linux/skbuff.h:1081 [inline] htc_connect_service+0x2cc/0x840 drivers/net/wireless/ath/ath9k/htc_hst.c:257 ath9k_wmi_connect+0xd2/0x1a0 drivers/net/wireless/ath/ath9k/wmi.c:265 ath9k_init_htc_services.constprop.0+0xb4/0x650 drivers/net/wireless/ath/ath9k/htc_drv_init.c:146 ath9k_htc_probe_device+0x25a/0x1d80 drivers/net/wireless/ath/ath9k/htc_drv_init.c:959 ath9k_htc_hw_init+0x31/0x60 drivers/net/wireless/ath/ath9k/htc_hst.c:501 ath9k_hif_usb_firmware_cb+0x26b/0x500 drivers/net/wireless/ath/ath9k/hif_usb.c:1187 request_firmware_work_func+0x126/0x242 drivers/base/firmware_loader/main.c:976 process_one_work+0x94b/0x1620 kernel/workqueue.c:2264 worker_thread+0x96/0xe20 kernel/workqueue.c:2410 kthread+0x318/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Freed by task 0: kfree_skb+0x102/0x3d0 net/core/skbuff.c:690 ath9k_htc_txcompletion_cb+0x1f8/0x2b0 drivers/net/wireless/ath/ath9k/htc_hst.c:356 hif_usb_regout_cb+0x10b/0x1b0 drivers/net/wireless/ath/ath9k/hif_usb.c:90 __usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 __do_softirq+0x21e/0x950 kernel/softirq.c:292 Reported-and-tested-by: syzbot+9505af1ae303dabdc646@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200404041838.10426-2-hqjagain@gmail.com
2019-09-10ath9k: release allocated buffer if timed outNavid Emamdoost1-0/+1
In ath9k_wmi_cmd, the allocated network buffer needs to be released if timeout happens. Otherwise memory will be leaked. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-29ath9k: use irqsave() in USB's complete callbackSebastian Andrzej Siewior1-5/+6
The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-25ath9k: remove cast to void pointerHimanshu Jha1-2/+2
casting to void pointer from any pointer type and vice-versa is done implicitly and therefore casting is not needed in such a case. Done using Coccinellle. Semantic Patch used : @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T *)x)->f | - (T *) e ) Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-20net: manual clean code which call skb_put_[data:zero]yuan linyu1-2/+1
Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg1-1/+1
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg1-2/+1
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13ath9k_htc: wmi: match wait_for_completion_timeout return typeNicholas Mc Guire1-1/+2
Return type of wait_for_completion_timeout is unsigned long not int. As time_left is exclusively used for wait_for_completion_timeout here its type is simply changed to unsigned long. API conformance testing for completions with coccinelle spatches are being used to locate API usage inconsistencies: ./drivers/net/wireless/ath/ath9k/wmi.c:331 int return assigned to unsigned long Patch was compile tested with x86_64_defconfig + CONFIG_ATH_CARDS=m, CONFIG_ATH9K_HTC=m Patch is against 4.1-rc3 (localversion-next is -next-20150514) Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-04-07ath9k_htc: check seq number instead of cmd id for timeoutFred Chou1-6/+6
As the driver may send multiple wmi commands with identical cmd id, it is more robust to check seq number for timeout instead. Signed-off-by: Fred Chou <fred.chou.nd@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30ath9k_htc: add new WMI_REG_RMW_CMDID commandOleksij Rempel1-0/+3
Since usb bus add extra delay on each request, a command with read + write requests is too expensive. We can dramtically reduce usb load by moving this command to firmware. In my tests, this patch will reduce channel scan time for about 5-10 seconds. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2011-12-19ath: Convert ath_dbg(bar, ATH_DBG_<FOO>, to ath_dbg(bar, FOOJoe Perches1-5/+3
Add ATH_DBG_ to macros to shorten the uses and reduce the line count. Coalesce ath_dbg formats. Add missing spaces to coalesced formats. Add missing newline terminations to ath_dbg formats. Align ath_dbg arguments where appropriate. Standardize ath_dbg formats without periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: Drag the driver to the year 2011Sujith Manoharan1-1/+1
The Times They Are a-Changin'. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ath9k_htc: Add a new WMI command to set a rate maskSujith Manoharan1-0/+2
This patch adds WMI_BITRATE_MASK_CMDID which can be used by the set_bitrate_mask() handler. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ath9k_htc: Remove unused WMI_AGGR_LIMIT_CMDSujith Manoharan1-2/+0
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add detailed firmware statisticsSujith Manoharan1-11/+8
New debugfs files: <debugfs_root>/ath9k_htc/<phy#>/tgt_int_stats <debugfs_root>/ath9k_htc/<phy#>/tgt_tx_stats <debugfs_root>/ath9k_htc/<phy#>/tgt_rx_stats Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add a timer to cleanup WMI eventsSujith Manoharan1-0/+3
Occasionally, a WMI event would arrive ahead of the TX URB completion handler. Discarding these events would exhaust the available TX slots, so handle them by running a timer cleaning up such events. Also, timeout packets for which TX completion events have not arrived. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add support for TX completionSujith Manoharan1-0/+10
Now that the infrastructure is in place, process WMI TX status events and complete packets. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Introduce new HTC APISujith Manoharan1-1/+1
A new routine that takes an endpoint explicitly is introduced. The normal htc_send() now retrieves the endpoint from the packet's private data. This would be useful in TX completion when the endpoint ID would be required. While at it, use a helper function to map the queue to endpoint. Data/mgmt/beacon packets use htc_send(), while WMI comamnds pass the endpoint to HTC. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Use SKB's private area for TX parametersSujith Manoharan1-1/+1
For all packets sent through the USB_WLAN_TX_PIPE endpoint, the private area of the SKB's tx_info can be used to store driver-specific information. For packets sent through USB_REG_OUT_PIPE, this will not make a difference since they are routed through a separate routine that doesn't access the private region. This would help in situations where TX information is required in the URB callback. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Remove unused WMI commandsSujith Manoharan1-14/+0
WMI_TGT_TXQ_ENABLE_CMDID WMI_HOST_ATTACH WMI_DEBUG_INFO_CMDID WMI_BEACON_UPDATE_CMDID WMI_RESET_CMDID WMI_RX_LINK_CMDID WMI_STOP_DMA_RECV_CMDID Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Queue WMI eventsSujith Manoharan1-34/+63
Use a queue to handle WMI events and schedule a tasklet to process the events. This fixes the race between the WMI event ISR and the SWBA tasklet when the arrival of WMI events in quick succession could overwrite the SWBA data before the tasklet from a previous iteration could have been scheduled. Also, drain the WMI queue properly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add beacon slotsSujith Manoharan1-1/+3
Beacon transmission is now handled through a slot mechanism. This allows multiple beaconing interfaces to be be present. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Fix WMI and beacon headerSujith Manoharan1-1/+6
Match the beacon header with that of the firmware. Also, the firmware reports the TSF for an SWBA, so store it. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add a WMI command to get the firmware versionSujith Manoharan1-0/+2
Also, update the wiphy information and use the correct device pointer when registering. This would fix ethtool. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Configure beacon timers in AP modeSujith Manoharan1-4/+0
Handle multi-interface situations by checking if AP interfaces are already present. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04ath9k_htc: Handle FATAL eventsSujith Manoharan1-2/+16
The device has to be reset when a FATAL event is received. Not doing so would leave the card in a non-working state. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-22ath9k_htc: Fix warning on device removalSujith Manoharan1-1/+1
The commit "ath9k_hw: warn if we cannot change the power to the chip" introduced a new warning to indicate chip powerup failures, but this is not required for devices that have been removed. Handle USB device removal properly by checking for unplugged status. For PCI devices, this warning will still be seen when the card is pulled out, not sure how to check for card removal. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-07ath: Convert ath_print to ath_dbgJoe Perches1-6/+6
Remove ath/debug.h and the includes of these files. Coalesce long formats. Correct a few misspellings and missing "\n"s from these logging messages. Remove unnecessary trailing space before a newline. Remove ARRAY_SIZE casts, use printf type %zu Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14ath9k_htc: Fix memory leak on WMI event handlerRajkumar Manoharan1-50/+22
ath9k_wmi_ctrl_rx is racy with ath9k_wmi_tasklet on event notification due to which the wmi_skb may be overwritten which leads to memory leak. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath9k_htc: Add support for bluetooth coexistence.Vivek Natarajan1-0/+2
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k: cleanup: remove unneeded null checkDan Carpenter1-3/+0
We dereference "wmi" on the line before and also when we initialize "ah". This check has always been after a dereference since the first commit a couple months ago. Looking through the code, it looks like "wmi" can't actually be null here so I just removed the check. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26ath9k_htc: Fix WMI command raceSujith1-4/+4
My patch "ath9k_htc: Handle WMI timeouts properly" introduced a race condition in WMI command processing. The last issued command should be stored _before_ issuing a WMI command. Not doing this would result in the WMI event IRQ dropping correct command responses as invalid. Fix this race by storing the command id correctly. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26ath9k_htc: Handle device unplug properlySujith1-0/+3
When the USB device has been unplugged, there is no point in trying to send commands to the target. Fix this by denying all WMI commands in such a case. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_htc: Fix sparse endian warningsSujith1-1/+1
This patch fixes a bunch of endian issues that were exposed by sparse. It's a miracle that the driver worked at all till now. The Lord be praised. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_htc: Handle WMI timeouts properlySujith1-0/+13
If a WMI command has timed out for some reason, a late WMI response would end up updating the response region of a new WMI request that has been issued in the meantime. Fix this race condition by dropping a WMI response if a new WMI command has been issued. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_htc: Implement multiple register write supportSujith1-0/+1
This patch adds support for writing multiple registers in a single USB command. Specific calls from the HW code that performs multiple register writes would be modified to make use of this in subsequent patches. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-14ath9k-htc:respect usb buffer cacheline alignment in reg out pathMing Lei1-3/+3
In ath9k-htc register out path, ath9k-htc will pass skb->data into usb hcd and usb hcd will do dma mapping and unmapping to the buffer pointed by skb->data, so we should pass a cache-line aligned address. This patch replace __dev_alloc_skb with alloc_skb to make skb->data pointed to a cacheline aligned address simply since ath9k-htc does not skb_push on the skb and pass it to mac80211, also use kfree_skb to free the skb allocated by alloc_skb(we can use kfree_skb safely in hardirq context since skb->destructor is NULL always in the path). Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-14ath9k-htc:respect usb buffer cacheline alignment in reg in pathMing Lei1-2/+2
In ath9k-htc register in path, ath9k-htc will pass skb->data into usb hcd and usb hcd will do dma mapping and unmapping to the buffer pointed by skb->data, so we should pass a cache-line aligned address. This patch replace __dev_alloc_skb with alloc_skb to make skb->data pointed to a cacheline aligned address simply since ath9k-htc does not skb_push on the skb and pass it to mac80211, also use kfree_skb to free the skb allocated by alloc_skb(we can use kfree_skb safely in hardirq context since skb->destructor is NULL always in the path). Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-23ath9k_htc: Support for AR9271 chipset.Sujith1-0/+319
Features: * Station mode * IBSS mode * Monitor mode * Legacy support * HT support * TX/RX 11n Aggregation * HW encryption * LED * Suspend/Resume For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-01 23:56:13 +0000