summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/sfc/nic.h
AgeCommit message (Collapse)AuthorFilesLines
2022-05-04sfc: Disable Siena supportMartin Habets1-4/+0
Disable the build of Siena code until later in this patch series. Prevent sfc.ko from binding to Siena NICs. efx_init_sriov/efx_fini_sriov is only used for Siena. Remove calls to those. Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: de-indirect TSO handlingEdward Cree1-0/+4
Remove the tx_queue->handle_tso function pointer, and just use tx_queue->tso_version to decide which function to call, thus removing an indirect call from the fast path. Instead of passing a tso_v2 flag to efx_mcdi_tx_init(), set the desired tx_queue->tso_version before calling it. In efx_mcdi_tx_init(), report back failure to obtain a TSOv2 context by setting tx_queue->tso_version to 0, which will cause the TX path to use the GSO-based fallback. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-30sfc: remove duplicate declaration of efx_enqueue_skb_tso()Edward Cree1-3/+0
Define it in nic_common.h, even though the ef100 driver will have a different implementation backing it (actually a WARN_ON_ONCE as it should never get called by ef100. But it needs to still exist because common TX path code references it). Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29sfc: commonise drain event handlingEdward Cree1-1/+0
Avoids a call from generic MCDI code into ef10.c. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29sfc: split up nic.hEdward Cree1-295/+1
The new nic_common.h contains the inlines for NIC-type function dispatch, declarations for NIC-generic functions in nic.c, and other similar NIC- generic functionality. Retained in nic.h are NIC-specific declarations such as the siena and ef10 nic_data structs and various farch functions. The EF100 driver will thus include nic_common.h but not nic.h. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29sfc: refactor EF10 stats handlingEdward Cree1-0/+3
Separate the generation-count handling from the format conversion, to make it easier to re-use both for EF100. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-11sfc: move rx_rss_context_exclusive into struct efx_mcdi_filter_tableEdward Cree1-2/+0
It's both set and used solely by mcdi_filters.c, so there's no reason for it to be in ef10-specific nic_data. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-11sfc: move 'must restore' flags out of ef10-specific nic_dataEdward Cree1-7/+0
Common code in mcdi_filters.c uses these flags, so by moving them to either struct efx_nic (in the case of must_realloc_vis) or struct efx_mcdi_filter_table (for must_restore_rss_contexts and must_restore_filters), decouple this code from ef10's nic_data. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-11sfc: move vport_id to struct efx_nicEdward Cree1-2/+0
Remove some usage of ef10-specific nic_data structs from common MCDI functions, in preparation for using them from a non-EF10 driver. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08sfc: add new headers in preparation for code splitAlex Maftei (amaftei)1-0/+6
New headers contain prototypes of functions that will be common between ef10 and upcoming driver. Removed static modifier from the affected functions. Some function prototypes were removed from existing headers. Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02sfc: Remove unnecessary dependencies on I2CBen Hutchings1-1/+0
Only the SFC4000 code, now moved to sfc-falcon, needed I2C. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-04sfc: remove ctpio_dmabuf_start from statsBert Kenward1-1/+0
The ctpio_dmabuf_start entry is not actually a stat and shouldn't be exposed to ethtool. Fixes: 2c0b6ee837db ("sfc: expose CTPIO stats on NICs that support them") Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27sfc: protect list of RSS contexts under a mutexEdward Cree1-0/+3
Otherwise races are possible between ethtool ops and efx_ef10_rx_restore_rss_contexts(). Also, don't try to perform the restore on every reset, only after an MC reboot, otherwise we'll leak RSS contexts on the NIC. Fixes: 42356d9a137b ("sfc: support RSS spreading of ethtool ntuple filters") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27sfc: replace asynchronous filter operationsEdward Cree1-2/+0
Instead of having an efx->type->filter_rfs_insert() method, just use workitems with a worker function that calls efx->type->filter_insert(). The only user of this is efx_filter_rfs(), which now queues a call to efx_filter_rfs_work(). Similarly, efx_filter_rfs_expire() is now a worker function called on a new channel->filter_work work_struct, so the method efx->type->filter_rfs_expire_one() is no longer called in atomic context. We also add a new mutex efx->rps_mutex to protect the RPS state (efx-> rps_expire_channel, efx->rps_expire_index, and channel->rps_flow_id) so that the taking of efx->filter_lock can be moved to efx->type->filter_rfs_expire_one(). Thus, all filter table functions are now called in a sleepable context, allowing them to use sleeping locks in a future patch. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08sfc: support RSS spreading of ethtool ntuple filtersEdward Cree1-2/+0
Use a linked list to associate user-facing context IDs with FW-facing context IDs (since the latter can change after an MC reset). Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: MAC TX timestamp handling on the 8000 seriesMartin Habets1-0/+1
TX timestamps on 8000 series are supplied from the MAC. This timestamp is only 48 bits long. The high order bits from the last time sync event are used for the top 16 bits. Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: only enable TX timestamping if the adapter is licensed for itMartin Habets1-0/+1
If we try to enable the feature and do not have the license for it, the MCPU will refuse and fail our TX queue init. Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: add function to determine which TX timestamping method to useMartin Habets1-0/+1
Use MC capability MC_CMD_GET_CAPABILITIES_V2_OUT_TX_MAC_TIMESTAMPING to detect whether the NIC supports timestamping packets sent out the main datapath. Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: handle TX timestamps in the normal data pathMartin Habets1-0/+1
Before this work, TX timestamping is done by sending each SKB to the MC. On the 8000 series (Medford1) we have high speed timestamping via the MAC, which means we can use normal TX queues for this without a significant drop in bandwidth. On the X2000 series (Medford2) support for transmitting via the MC is removed, so the new way must be used. This patch enables timestamping on a TX queue, if requested. It also enhances TX event handling to process the extra completion events, and puts the time in the SKB. Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21sfc: expose CTPIO stats on NICs that support themBert Kenward1-0/+17
While the Linux driver doesn't use CTPIO ('cut-through programmed I/O'), other drivers on the same port might, so if we're responsible for reporting per-port stats we need to include the CTPIO stats. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21sfc: expose FEC stats on Medford2Edward Cree1-0/+7
There's no explicit capability bit, so we just condition them on having efx->num_mac_stats >= MC_CMD_MAC_NSTATS_V2. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland1-3/+3
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-12sfc: revert changes to NIC revision numbersBert Kenward1-2/+6
The revision enum values (eg EFX_REV_HUNT_A0) form part of our API, and are included in ethtool. If these are inconsistent then ethtool will print garbage for a register dump (ethtool -d). Fixes: 5a6681e22c14 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09sfc: configure UDP tunnel offload portsJon Cooper1-0/+7
Implement ndo_udp_tunnel_{add,del} to update the NIC's list of VXLAN and GENEVE UDP ports. Also reset the port list to empty on driver load and on driver unload, with appropriate flag set on the unload case. These port numbers are used for RX inner checksum offload, and in future will also be used for TX inner checksum offload and encapsulated TSO. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17sfc: read back RX hash config from the NIC when querying it with ethtool -xEdward Cree1-0/+1
Ensures that we report the key and indirection table the NIC is using, rather than (if setting them failed earlier) what we wanted it to use. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-16sfc: get PIO buffer size from the NICEdward Cree1-0/+2
The 8000 series SFC NICs have 4K PIO buffers, rather than the 2K of the 7000 series. Rather than having a hard-coded PIO buffer size (ER_DZ_TX_PIOBUF_SIZE), read it from the GET_CAPABILITIES_V2 MCDI response. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-16sfc: allow PIO more oftenEdward Cree1-3/+14
If an option descriptor has been sent on a queue but not followed by a packet, there will have been no completion event, so the read and write counts won't match and we'll think we can't do PIO. This combines with the fact that we have two TX queues (for en/disable checksum offload), and that both must be empty for PIO to happen. This patch adds a separate "packet_write_count" that tracks the most recent write_count we expect to see a completion event for; this excludes option descriptors but _includes_ PIO descriptors (even though they look like option descriptors). This is then used, rather than write_count, in efx_nic_tx_is_empty(). We only bother to maintain packet_write_count on EF10, since on Siena (a) there are no option descriptors and it always equals write_count, and (b) there's no PIO, so we don't need it anyway. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driverEdward Cree1-170/+2
Rationale: The differences between Falcon and Siena are in many ways larger than those between Siena and EF10 (despite Siena being nominally "Falcon- architecture"); for instance, Falcon has no MCPU, so there is no MCDI. Removing Falcon support from the sfc driver should simplify the latter, and avoid the possibility of Falcon support being broken by changes to sfc (which are rarely if ever tested on Falcon, it being end-of-lifed hardware). The sfc-falcon driver created in this changeset is essentially a copy of the sfc driver, but with Siena- and EF10-specific code, including MCDI, removed and with the "efx_" identifier prefix changed to "ef4_" (for "EFX 4000- series") to avoid collisions when both drivers are built-in. This changeset removes Falcon from the sfc driver's PCI ID table; then in sfc I've removed obvious Falcon-related code: I removed the Falcon NIC functions, Falcon PHY code, and EFX_REV_FALCON_*, then fixed up everything that referenced them. Also, increment minor version of both drivers (to 4.1). For now, CONFIG_SFC selects CONFIG_SFC_FALCON, so that updating old configs doesn't cause Falcon support to disappear; but that should be undone at some point in the future. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18sfc: Firmware-Assisted TSO version 2Bert Kenward1-0/+2
Add support for FATSOv2 to the driver. FATSOv2 offloads far more of the task of TCP segmentation to the firmware, such that we now just pass a single super-packet to the NIC. This means TSO has a great deal in common with a normal DMA transmit, apart from adding a couple of option descriptors. NIC-specific checks have been moved off the fast path and in to initialisation where possible. This also moves FATSOv1/SWTSO to a new file (tx_tso.c). The end of transmit and some error handling is now outside TSO, since it is common with other code. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26sfc: work around TRIGGER_INTERRUPT command not working on SFC9140Jon Cooper1-2/+2
MC_CMD_TRIGGER_INTERRUPT does not work on the SFC9140, as used in the sfn7x42q and sfn7x24f. Check for this using the MCDI workaround mechanism. The command is only used during self test. If it's not supported, skip the interrupt test. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12sfc: set interrupt moderation via MCDIBert Kenward1-0/+2
SFN8000-series NICs require a new method of setting interrupt moderation, via MCDI. This is indicated by a workaround flag. This new MCDI command takes an explicit time value rather than a number of ticks. It therefore makes sense to also store the moderation values in terms of time, since that is what the ethtool interface is interested in. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12sfc: retrieve second word of datapath capabilitiesBert Kenward1-0/+3
Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15sfc: Implement list of VLANs added over interfaceAndrew Rybchenko1-0/+5
Right now it contains dummy VLAN entry with unspecified VID only. The entry is used for the case when HW VLAN filtering is not used. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21sfc: enable cascaded multicast filters in MCFWDaniel Pieczko1-0/+2
After creating event queue 0, check to see if the workaround is enabled, and enable it if necessary. This will be called during PCI probe and also when coming back up after a reset. The nic_data->workaround_26807 will be used in the future to control the filter insertion behaviour based on this workaround. Only the primary PF can enable this workaround, so tolerate an EPERM error and continue. Otherwise, if any step in the checking and enabling of the workaround fails, the event queue must be removed. We check that workaround is implemented before trying to enable it, and store the current workaround setting before trying to change it. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02sfc: display vadaptor statistics for all interfacesDaniel Pieczko1-0/+18
All interfaces will display vadaptor statistics, so set all the relevant bits in the stats bitmask. Only functions with the LINKCTRL flag will see other stats, including (per-port) MAC stats. The vadaptor stats are from rx_unicast to tx_overflow. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02sfc: add "port_" prefix to MAC statsDaniel Pieczko1-53/+53
The MAC stats are per-port and will only be displayed on the PF with control of the link (one per physical port). Vadapter stats will also be displayed for this PF, so distinguish the MAC stats by adding a prefix of "port_". Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02sfc: Implement ndo_gets_phys_port_id() for EF10 VFsShradha Shah1-0/+1
Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-21sfc: Store vf_index in nic_data for Ef10.Shradha Shah1-0/+1
Added function efx_ef10_get_vf_index to store the vf_index in nic_data during probe vf_index is needed in future patches to access a particular VF in the VF data structure. Moved efx_ef10_probe_pf and efx_ef10_probe_vf in order to used efx_ef10_remove Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09sfc: Add use of shared RSS contexts.Jon Cooper1-0/+2
Allow PFs to allocate shared RSS contexts if we exhaust our exclusive RSS contexts. Make VFs use shared RSS contexts in all cases. Spruce up error handling so that the shadow copy of the RSS table is updated after successful update, rather than in all cases, so that we report the actual contents of the RSS table after a failure to set it, rather than what we'd like it to be. Populate context_size parameter when vacuously allocating RSS context of size 1. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09sfc: create vports for VFs and assign random MAC addressesShradha Shah1-0/+7
The parent PF creates vports for all its child VFs and adds MAC addresses to these. When the VF driver loads, it can make an MCDI call to get the MAC address that the parent PF assigned it. The parent PF also assigns a mac address to its own vport because implicit creation of a vAdaptor will only work on evb ports with MAC addresses assigned. The vport MAC address needs to be stored in the PF's nic_data struct as it can later be changed on the vadaptor (and its net_dev struct). When removing a vport the original MAC address must be deleted. A new flag is needed in the VF data structure to identify whether a vport has been assigned to the VF. This is to determine whether it needs to be un-assigned before freeing the vport. Also, attempting to un-assign a vport which is not assigned will result in an EALREADY error. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09sfc: Prepare to bind the sfc driver to the VF.Shradha Shah1-0/+1
Added efx_nic_type structure for VF. Mapped a different BAR for VF as it uses BAR 0 for memory. Added functions sriov_init and sriov_fini. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09sfc: get the PF number and record in nic_dataDaniel Pieczko1-0/+2
Use MC_CMD_GET_FUNCTION_INFO to record the PF number in nic_data. This will be needed when assigned vports to VFs. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09sfc: create VEB vswitch and vport above default firmware setupDaniel Pieczko1-0/+2
Adds functions to allocate and free vswitches and vports; vadaptors are automatically allocated and freed when TX/RX queues are initialised and finalised. This vswitching structure is only created if the firmware supports it, so a check that full-featured firmware is running is performed first. If the MC resets, the vswitching infrastructure will need to be recreated, so mark the "must_probe_vswitching" flag when an MC reboot is detected. Don't try to create a vswitch if vf-count=0 This allocation of vswitches and vports does not currently support configuring VLAN tags, but that can be added in a future change. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09sfc: record the PF's vport ID in nic_dataDaniel Pieczko1-0/+2
The default port ID of EVB_PORT_ID_ASSIGNED is a "magic" number for the MCFW to select the physical port of the PF. If other vswitches and vports are created on top of the default firmware configuration, the ID of the newly created vport is then required when passed to MCDI commands. Currently, this doesn't happen so the vport_id is never changed, but a subsequent patch will change this behaviour so that other vswitches and vports are created. The vport_id recorded in nic_data is only relevant for PFs. VFs will have their vports created by their parent PF, and in that case the parent PF will record the vport ID of each VF. For a VF, nic_data->vport_id is expected to remain at the default value. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09sfc: Record [rt]x_dpcpu_fw_id in EF10 nic_dataDaniel Pieczko1-0/+4
The (future) code to add/remove vswitches and vports will be dependent on the firmware variant. To simplify the checking of the firmware variant, record values for rx_dpcpu_fw_id and tx_dpcpu_fw_id in EF10 nic_data. There was only one place where this was previously used: efx_mcdi_print_fwver() in ethtool.c. The MC_CMD_GET_CAPABILITIES can be replaced and the values from nic_data used instead. Note that the printing of "?" if the MC command fails or if the outlength is incorrect no longer apply, because errors are returned in efx_ef10_init_datapath_caps() in both of these cases. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09sfc: Move and rename efx_vf struct to siena_vfDaniel Pieczko1-0/+2
The efx_vf struct contains Siena-specific fields for VFs, so rename to siena_vf. Also move it into the siena_nic_data struct, as EF10 will track its VFs in its own ef10_nic_data, storing much less information about them since VFDI is no longer used. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09sfc: Own header for nic-specific sriov functions, single instance of ↵Shradha Shah1-111/+0
netdev_ops and sriov removed from Falcon code By putting all the efx_{siena,ef10}_sriov_* declarations in {siena,ef10}_sriov.h, ensure they cannot be called from nic-generic code. Also fixes up an instance of this, where mcdi.c was calling efx_siena_sriov_flr. The single instance of netdev_ops should call general high level functions that can then call something adapter specific in efx_nic_type. We should only do adapter specialisation via efx_nic_type. Removal of sriov functionality from the Falcon code means that tests are needed for the presence of some callbacks. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06sfc: Add NIC type operations to replace direct calls from efx.c into ↵Shradha Shah1-1/+23
siena_sriov.c Also add dummy functions where required to avoid NULL pointer dereference. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06sfc: Rename implementations in siena_sriov.c to have a 'siena' prefixShradha Shah1-33/+37
Patch in preparation for the upcoming EF10 sriov support. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-28 01:37:30 +0000