summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/marvell/octeontx2/af
AgeCommit message (Collapse)AuthorFilesLines
2023-01-06octeontx2-af: Fix LMAC config in cgx_lmac_rx_tx_enableAngela Czubak2-3/+2
PF netdev can request AF to enable or disable reception and transmission on assigned CGX::LMAC. The current code instead of disabling or enabling 'reception and transmission' also disables/enable the LMAC. This patch fixes this issue. Fixes: 1435f66a28b4 ("octeontx2-af: CGX Rx/Tx enable/disable mbox handlers") Signed-off-by: Angela Czubak <aczubak@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230105160107.17638-1-hkelam@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-26net: ethernet: marvell: octeontx2: Fix uninitialized variable warningAnuradha Weeraman1-1/+1
Fix for uninitialized variable warning. Addresses-Coverity: ("Uninitialized scalar variable") Signed-off-by: Anuradha Weeraman <anuradha@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni1-1/+5
Merge in the left-over fixes before the net-next pull-request. net/mptcp/subflow.c d3295fee3c75 ("mptcp: use proper req destructor for IPv6") 36b122baf6a8 ("mptcp: add subflow_v(4,6)_send_synack()") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-12octeontx2-af: cn10k: mcs: Fix a resource leak in the probe and remove functionsChristophe JAILLET1-1/+5
In mcs_register_interrupts(), a call to request_irq() is not balanced by a corresponding free_irq(), neither in the error handling path, nor in the remove function. Add the missing calls. Fixes: 6c635f78c474 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/69f153db5152a141069f990206e7389f961d41ec.1670693669.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-07octeontx2-af: Add FEC stats for RPM/RPM_USX blockHariprasad Kelam5-2/+82
CN10K silicon MAC block RPM and CN10KB silicon MAC block RPM_USX both support BASER and RSFEC modes. Also MAC (CGX) on OcteonTx2 silicon variants and MAC (RPM) on OcteonTx3 CN10K are different and FEC stats need to be read differently. CN10KB MAC block (RPM_USX) fec csr offsets are same as CN10K MAC block (RPM) mac_ops points to same fn(). Upper layer interface between RVU AF and PF netdev is kept same. Based on silicon variant appropriate fn() pointer is called to read FEC stats Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-07octeontx2-af: cn10kb: Add RPM_USX MAC supportHariprasad Kelam8-41/+270
OcteonTx2's next gen platform the CN10KB has RPM_USX MAC which has a different serdes when compared to RPM MAC. Though the underlying HW is different, the CSR interface has been designed largely inline with RPM MAC, with few exceptions though. So we are using the same CGX driver for RPM_USX MAC as well and will have a different set of APIs for RPM_USX where ever necessary. The RPM and RPM_USX blocks support a different number of LMACS. RPM_USX support 8 LMACS per MAC block whereas legacy RPM supports only 4 LMACS per MAC. with this RPM_USX support double the number of DMAC filters and fifo size. This patch adds initial support for CN10KB's RPM_USX MAC i.e registering the driver and defining MAC operations (mac_ops). Adds the logic to configure internal loopback and pause frames and assign FIFO length to LMACS. Kernel reads lmac features like lmac type, autoneg, etc from shared firmware data this structure only supports 4 lmacs per MAC, this patch extends this structure to accommodate 8 lmacs. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-07octeontx2-af: Support variable number of lmacsRakesh Babu Saladi8-40/+42
Most of the code in CGX/RPM driver assumes that max lmacs per given MAC as always, 4 and the number of MAC blocks also as 4. With this assumption, the max number of interfaces supported is hardcoded to 16. This creates a problem as next gen CN10KB silicon MAC supports 8 lmacs per MAC block. This patch solves the problem by using "max lmac per MAC block" value from constant csrs and uses cgx_cnt_max value which is populated based number of MAC blocks supported by silicon. Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-30net: devlink: clean-up empty devlink_ops::info_get()Vincent Mailhol1-7/+0
devlink_ops::info_get() is now optional and devlink will continue to report information even if that callback gets removed. Remove all the empty devlink_ops::info_get() callbacks from the drivers. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30net: devlink: let the core report the driver name instead of the driversVincent Mailhol1-1/+1
The driver name is available in device_driver::name. Right now, drivers still have to report this piece of information themselves in their devlink_ops::info_get callback function. In order to factorize code, make devlink_nl_info_fill() add the driver name attribute. Now that the core sets the driver name attribute, drivers are not supposed to call devlink_info_driver_name_put() anymore. Remove devlink_info_driver_name_put() and clean-up all the drivers using this function in their callback. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Tested-by: Ido Schimmel <idosch@nvidia.com> # mlxsw Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30octeontx2-af: Simplify a size computation in rvu_npc_exact_init()Christophe JAILLET1-1/+1
We know that table_size = table->mem_table.depth * table->mem_table.ways, so use it instead, it is less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/5230dabe27f48948a9fd0f50a62e2437b65e6a6e.1669378798.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30octeontx2-af: Fix the size of memory allocated for the 'id_bmap' bitmapChristophe JAILLET1-2/+2
This allocation is really spurious. The size of the bitmap is 'tot_ids' and it is used as such in the driver. So we could expect something like: table->id_bmap = devm_kcalloc(rvu->dev, BITS_TO_LONGS(table->tot_ids), sizeof(long), GFP_KERNEL); However, when the bitmap is allocated, we allocate: BITS_TO_LONGS(table->tot_ids) * table->tot_ids ~= table->tot_ids / 32 * table->tot_ids ~= table->tot_ids^2 / 32 It is proportional to the square of 'table->tot_ids' which seems to potentially be big. Allocate the expected amount of memory, and switch to the bitmap API to have it more straightforward. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/ce2710771939065d68f95d86a27cf7cea7966365.1669378798.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30octeontx2-af: Use the bitmap API to allocate bitmapsChristophe JAILLET1-3/+3
Use devm_bitmap_zalloc() instead of hand-writing it. This also makes the comment "Allocate bitmap for 32 entry mcam" more explicit because now 32 is really used in the allocation function, instead of an obscure 'sizeof(long)'. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/24177a9ee7043259448b735263d9cfd6a70e89a4.1669378798.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30octeontx2-af: Slightly simplify rvu_npc_exact_init()Christophe JAILLET1-2/+1
Use kzalloc() instead of kmalloc()/memset(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/60ea220ccf3b61963f7d5a97e3df2c76a5feb837.1669378798.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30octeontx2-af: Fix a potentially spurious error messageChristophe JAILLET1-1/+1
When this error message is displayed, we know that the all the bits in the bitmap are set. So, bitmap_weight() will return the number of bits of the bitmap, which is 'table->tot_ids'. It is unlikely that a bit will be cleared between mutex_unlock() and dev_err(), but, in order to simplify the code and avoid this possibility, just take 'table->tot_ids'. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/5ce01c402f86412dc57884ff0994b63f0c5b3871.1669378798.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-3/+11
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-28octeontx2-pf: Add support to filter packet based on IP fragmentSuman Ghosh4-0/+22
1. Added support to filter packets based on IP fragment. For IPv4 packets check for ip_flag == 0x20 (more fragment bit set). For IPv6 packets check for next_header == 0x2c (next_header set to 'fragment header for IPv6') 2. Added configuration support from both "ethtool ntuple" and "tc flower". Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-24octeontx2-af: Fix reference count issue in rvu_sdp_init()Xiongfeng Wang1-2/+5
pci_get_device() will decrease the reference count for the *from* parameter. So we don't need to call put_device() to decrease the reference. Let's remove the put_device() in the loop and only decrease the reference count of the returned 'pdev' for the last loop because it will not be passed to pci_get_device() as input parameter. We don't need to check if 'pdev' is NULL because it is already checked inside pci_dev_put(). Also add pci_dev_put() for the error path. Fixes: fe1939bb2340 ("octeontx2-af: Add SDP interface support") Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Link: https://lore.kernel.org/r/20221123065919.31499-1-wangxiongfeng2@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-24octeontx2-pf: Add check for devm_kcallocJiasheng Jiang1-0/+2
As the devm_kcalloc may return NULL pointer, it should be better to add check for the return value, as same as the others. Fixes: e8e095b3b370 ("octeontx2-af: cn10k: Bandwidth profiles config support") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20221122055449.31247-1-jiasheng@iscas.ac.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-22octeontx2-pf: Add additional checks while configuring ucast/bcast/mcast rulesSuman Ghosh4-14/+99
1. If a profile does not support DMAC extraction then avoid installing NPC flow rules for unicast. Similarly, if LXMB(L2 and L3) extraction is not supported by the profile then avoid installing broadcast and multicast rules. 2. Allow MCAM entry insertion for promiscuous mode. 3. For the profiles where DMAC is not extracted in MKEX key default unicast entry installed by AF is not valid. Hence do not use action from the AF installed default unicast entry for such cases. 4. Adjacent packet header fields in a packet like IP header source and destination addresses or UDP/TCP header source port and destination can be extracted together in MKEX profile. Therefore MKEX profile can be configured to in two ways: a. Total of 4 bytes from start of UDP header(src port + destination port) or b. Two bytes from start and two bytes from offset 2 Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://lore.kernel.org/r/20221118053329.2288486-1-sumang@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-21octeontx2-af: cn10k: mcs: Fix copy and paste bug in mcs_bbe_intr_handler()Dan Carpenter1-1/+1
This code accidentally uses the RX macro twice instead of the RX and TX. Fixes: 6c635f78c474 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts") Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18octeontx2-af: debugsfs: fix pci device refcount leakYang Yingliang1-0/+3
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So before returning from rvu_dbg_rvu_pf_cgx_map_display() or cgx_print_dmac_flt(), pci_dev_put() is called to avoid refcount leak. Fixes: dbc52debf95f ("octeontx2-af: Debugfs support for DMAC filters") Fixes: e2fb37303865 ("octeontx2-af: Display CGX, NIX and PF map in debugfs.") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221117124658.162409-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-02octeontx2-af: Allow mkex profile without DMAC and add L2M/L2B header ↵Suman Ghosh3-18/+70
extraction support 1. It is possible to have custom mkex profiles which do not extract DMAC at all into the key. Hence allow mkex profiles which do not have DMAC to be loaded into MCAM hardware. This patch also adds debugging prints needed to identify profiles with wrong configuration. 2. If a mkex profile set "l2l3mb" field for Rx interface, then Rx multicast and broadcast entry should be configured. Signed-off-by: Suman Ghosh <sumang@marvell.com> Link: https://lore.kernel.org/r/20221031090856.1404303-1-sumang@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-09octeontx2-af: cn10k: mcs: Fix error return code in mcs_register_interrupts()Yang Yingliang1-1/+3
If alloc_mem() fails in mcs_register_interrupts(), it should return error code. Fixes: 6c635f78c474 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Add debugfs supportGeetha sowjanya2-0/+350
This patch adds debugfs entry to dump MCS secy, sc, sa, flowid and port stats. This helps in debugging the packet path and to figure out where exactly packet was dropped. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Handle MCS block interruptsGeetha sowjanya8-12/+865
Hardware triggers an interrupt for events like PN wrap to zero, PN crosses set threshold. This interrupt is received by the MCS_AF. MCS AF then finds the PF/VF to which SA is mapped and notifies them using mcs_intr_notify mbox message. PF/VF using mcs_intr_cfg mbox can configure the list of interrupts for which they want to receive the notification from AF. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Support for stats collectionGeetha sowjanya6-0/+1048
Add mailbox messages to return the resource stats to the caller. Stats of SecY, SC and SAs as per the macsec standard, TCAM flow id hits/miss, mailbox to clear the stats are implemented. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Install a default TCAM for normal trafficGeetha sowjanya3-0/+69
Out of all the TCAM entries, reserve last TX and RX TCAM flow entry(low priority) so that normal traffic can be sent out and received. The traffic which needs macsec processing hits the high priority TCAM flows. Also install a FLR handler to free the allocated resources for PF/VF. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Manage the MCS block hardware resourcesGeetha sowjanya6-1/+1530
To establish a macsec connection association netdev driver needs hardware resources like SecY, TCAM flows, SCs and SAs. This patch manages allocating, freeing and configuring those resources. AF consumers can request resources and configure them via these mailbox messages. AF can allocate until it runs out of hardware resources. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Add mailboxes for port related operationsGeetha sowjanya5-4/+376
There are set of configurations to be done at MCS port level like bringing port out of reset, making port as operational or bypass. This patch adds all the port related mailbox message handlers so that AF consumers can use them. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: Introduce driver for macsec block.Geetha sowjanya8-1/+678
CN10K-B and CNF10K-B has macsec block(MCS) to encrypt and decrypt packets at MAC level. This block is a global resource with hardware resources like SecYs, SCs and SAs and is in between NIX block and RPM LMAC. CN10K-B silicon has only one MCS block which receives packets from all LMACS whereas CNF10K-B has seven MCS blocks for seven LMACs. Both MCS blocks are similar in operation except for few register offsets and some configurations require writing to different registers. Those differences between IPs are handled using separate ops. This patch adds basic driver and does the initial hardware calibration and parser configuration. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-17octeontx2-af: Initialize PTP_SEC_ROLLOVER register properlyNaveen Mamindlapalli1-0/+10
Since the reset value of PTP_SEC_ROLLOVER is incorrect on CNF10KB silicon, the ptp timestamps are inaccurate. This patch initializes the PTP_SEC_ROLLOVER register properly for the CNF10KB silicon. Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-17octeontx2-af: Add PTP PPS Errata workaround on CN10K siliconNaveen Mamindlapalli3-1/+86
Errata: The ptp_clock_hi rollsover to zero one clock cycle before it reaches one second boundary. As a result, the pps threshold comparison fails after one second and the pps output signal won't toggle further. This patch workarounds the issue by programming the pps_lo_incr register to 500msec minus one clock cycle period, ensuring that the pps threshold comparison succeeds at one second rollover boundary and pps edge toggles. After that point, the driver will have enough time (~500msec) to reset the pps threshold value. After each one second boundary, hrtimer is invoked which resets the pps threshold value. Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-17octeontx2-pf: Add support for ptp 1-step mode on CN10K siliconHariprasad Kelam4-3/+30
Add support for ptp 1-step mode using timecounter. The seconds and nanoseconds to be updated in PTP header are calculated by adding the timecounter offset to the free running PTP clock counter time. The PF driver periodically gets the PTP clock time using AF mbox. The 1-step support uses HW feature to update correction field rather than OriginTimestamp field in PTP header. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-17octeontx2-af: return correct ptp timestamp for CN10K siliconNaveen Mamindlapalli1-1/+13
The MIO_PTP_TIMESTAMP format has been changed in CN10K silicon family. The upper 32-bits represents seconds and lower 32-bits represents nanoseconds. This patch returns nanosecond timestamp to NIX PF driver. Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-05octeontx2-af: Fix key checking for source macSubbaraya Sundeep1-1/+2
Given a field with its location/offset in input packet, the key checking logic verifies whether extracting the field can be supported or not based on the mkex profile loaded in hardware. This logic is wrong wrt source mac and this patch fixes that. Fixes: 9b179a960a96 ("octeontx2-af: Generate key field bit mask from KEX profile") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-05octeontx2-af: Fix mcam entry resource leakSubbaraya Sundeep2-0/+12
The teardown sequence in FLR handler returns if no NIX LF is attached to PF/VF because it indicates that graceful shutdown of resources already happened. But there is a chance of all allocated MCAM entries not being freed by PF/VF. Hence free mcam entries even in case of detached LF. Fixes: c554f9c1574e ("octeontx2-af: Teardown NPA, NIX LF upon receiving FLR") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-05octeontx2-af: suppress external profile loading warningHarman Kalra1-1/+1
The packet parser profile supplied as firmware may not be present all the time and default profile is used mostly. Hence suppress firmware loading warning from kernel due to absence of firmware in kernel image. Fixes: 3a7244152f9c ("octeontx2-af: add support for custom KPU entries") Signed-off-by: Harman Kalra <hkalra@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-05octeontx2-af: Apply tx nibble fixup alwaysStanislaw Kardach1-3/+4
NPC_PARSE_NIBBLE for TX interface has to be equal to the RX one for some silicon revisions. Mistakenly this fixup was only applied to the default MKEX profile while it should also be applied to any loaded profile. Fixes: 1c1935c9945d ("octeontx2-af: Add NIX1 interfaces to NPC") Signed-off-by: Stanislaw Kardach <skardach@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-15octeontx2-af: Set NIX link credits based on max LMACSunil Goutham7-9/+102
When number of LMACs active on a CGX/RPM are 3, then current NIX link credit config based on per lmac fifo length which inturn is calculated as 'lmac_fifo_len = total_fifo_len / 3', is incorrect. In HW one of the LMAC gets half of the FIFO and rest gets 1/4th. Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha Sowjanya <gakula@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-15octeontx2-af: Fixes static warningsRatheesh Kannoth1-11/+38
Fixes smatch static tool warning reported by smatch tool. rvu_npc_hash.c:1232 rvu_npc_exact_del_table_entry_by_id() error: uninitialized symbol 'drop_mcam_idx'. rvu_npc_hash.c:1312 rvu_npc_exact_add_table_entry() error: uninitialized symbol 'drop_mcam_idx'. rvu_npc_hash.c:1391 rvu_npc_exact_update_table_entry() error: uninitialized symbol 'hash_index'. rvu_npc_hash.c:1428 rvu_npc_exact_promisc_disable() error: uninitialized symbol 'drop_mcam_idx'. rvu_npc_hash.c:1473 rvu_npc_exact_promisc_enable() error: uninitialized symbol 'drop_mcam_idx'. otx2_dmac_flt.c:191 otx2_dmacflt_update() error: 'rsp' dereferencing possible ERR_PTR() otx2_dmac_flt.c:60 otx2_dmacflt_add_pfmac() error: 'rsp' dereferencing possible ERR_PTR() Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13octeontx2-af: Limit link bringup time at firmwareHariprasad Kelam4-5/+15
Set the maximum time firmware should poll for a link. If not set firmware could block CPU for a long time resulting in mailbox failures. If link doesn't come up within 1second, firmware will anyway notify the status as and when LINK comes up Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Geetha Sowjanya <gakula@marvell.com> Link: https://lore.kernel.org/r/20220712161815.12621-1-gakula@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-13octeontx2-af: returning uninitialized variableSebin Sebastian1-1/+1
Fix coverity error 'use of uninitialized variable'. err is uninitialized and is returned which can lead to unintended results. err has been replaced with -einval. Coverity issue: 1518921 (uninitialized scalar variable) Signed-off-by: Sebin Sebastian <mailmesebin00@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13octeontx2-af: Remove duplicate includeJiapeng Chong1-2/+0
The include is in line 14 and 23. Remove the duplicate. Fix following checkincludes warning: ./drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c: linux/bitfield.h is included more than once. ./drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c: rvu_npc_hash.h is included more than once. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13octeontx2-af: Skip CGX/RPM probe incase of zero lmac countHariprasad Kelam5-4/+17
In few error cases MAC(CGX/RPM) block is having 0 lmacs. AF driver uses MAC block with lmac pair to get firmware data etc. These commands will fail as there is no LMAC associated with MAC block. This patch skips the probe of these MAC blocks such that AF driver uses correct MAC block and LMAC pair for firmware communication and define new LMAC_AF_ERROR types for command timeout etc. This patch also enables channel back pressure for all LMACs. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-11octeontx2-af: Enable Exact match flag in kex profileRatheesh Kannoth1-2/+3
Enabled EXACT match flag in Kex default profile. Since there is no space in key, NPC_PARSE_NIBBLE_ERRCODE is removed Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Invoke exact match functions if supportedRatheesh Kannoth2-0/+41
If exact match table is supported, call functions to add/del/update entries in exact match table instead of RPM dmac filters Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Wrapper functions for MAC addr add/del/update/resetRatheesh Kannoth2-12/+370
These functions are wrappers for mac add/addr/del/update in exact match table. These will be invoked from mbox handler routines if exact matct table is supported and enabled. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2: Modify mbox request and response structuresRatheesh Kannoth2-8/+23
Exact match table modification requires wider fields as it has more number of slots to fill in. Modifying an entry in exact match table may cause hash collision and may be required to delete entry from 4-way 2K table and add to fully associative 32 entry CAM table. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Debugsfs support for exact match.Ratheesh Kannoth1-0/+179
There debugfs files created. 1. General information on exact match table 2. Exact match table entries. 3. NPC mcam drop on hit count stats. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Drop rules for NPC MCAMRatheesh Kannoth6-6/+481
NPC exact match table installs drop on hit rules in NPC mcam for each channel. This rule has broadcast and multicast bits cleared. Exact match bit cleared and channel bits set. If exact match table hit bit is 0, corresponding NPC mcam drop rule will be hit for the packet and will be dropped. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 15:02:23 +0000