summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ice/ice_dcb.c
AgeCommit message (Collapse)AuthorFilesLines
2022-11-17ice: Add an option to pre-allocate memory for ice_sched_nodeMichal Wilczynski1-1/+1
devlink-rate API requires a priv object to be allocated when node still doesn't have a parent. This is problematic, because ice_sched_node can't be currently created without a parent. Add an option to pre-allocate memory for ice_sched_node struct. Add new arguments to ice_sched_add() and ice_sched_add_elems() that allow for pre-allocation of memory for ice_sched_node struct. Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-14ice: Cleanup after ice_status removalTony Nguyen1-11/+8
Clean up code after changing ice_status to int. Rearrange to fix reverse Christmas tree and pull lines up where applicable. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com>
2021-12-14ice: Remove enum ice_statusTony Nguyen1-16/+15
Replace uses of ice_status to, as equivalent as possible, error codes. Remove enum ice_status and its helper conversion function as they are no longer needed. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com>
2021-12-14ice: Use int for ice_statusTony Nguyen1-29/+29
To prepare for removal of ice_status, change the variables from ice_status to int. This eases the transition when values are changed to return standard int error codes over enum ice_status. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com>
2021-09-28ice: Add DSCP supportDave Ertman1-16/+209
Implement code to handle submission of APP TLV's containing DSCP to TC mapping. The first such mapping received on an interface will cause that PF to switch to L3 DSCP QoS mode, apply the default config for that mode, and apply the received mapping. Only one such mapping will be allowed per DSCP value, and when the last DSCP mapping is deleted, the PF will switch back into L2 VLAN QoS mode, applying the appropriate default QoS settings. L3 DSCP QoS mode will only be allowed in SW DCBx mode, in other words, when the FW LLDP engine is disabled. Commands that break this mutual exclusivity will be blocked. Co-developed-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+2
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c - keep the ZC code, drop the code related to reinit net/bridge/netfilter/ebtables.c - fix build after move to net_generic Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-14ice: use kernel definitions for IANA protocol ports and ether-typesBruce Allan1-4/+4
The well-known IANA protocol port 3260 (iscsi-target 0x0cbc) and the ether-types 0x8906 (ETH_P_FCOE) and 0x8914 (ETH_P_FIP) are already defined in kernel header files. Use those definitions instead of open-coding the same. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-13ice: Fix potential infinite loop when using u8 loop counterColin Ian King1-2/+2
A for-loop is using a u8 loop counter that is being compared to a u32 cmp_dcbcfg->numapp to check for the end of the loop. If cmp_dcbcfg->numapp is larger than 255 then the counter j will wrap around to zero and hence an infinite loop occurs. Fix this by making counter j the same type as cmp_dcbcfg->numapp. Addresses-Coverity: ("Infinite loop") Fixes: aeac8ce864d9 ("ice: Recognize 860 as iSCSI port in CEE mode") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-9/+29
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-03-29ice: Recognize 860 as iSCSI port in CEE modeChinh T Cao1-9/+29
iSCSI can use both TCP ports 860 and 3260. However, in our current implementation, the ice_aqc_opc_get_cee_dcb_cfg (0x0A07) AQ command doesn't provide a way to communicate the protocol port number to the AQ's caller. Thus, we assume that 3260 is the iSCSI port number at the AQ's caller layer. Rely on the dcbx-willing mode, desired QoS and remote QoS configuration to determine which port number that iSCSI will use. Fixes: 0ebd3ff13cca ("ice: Add code for DCB initialization part 2/4") Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-23ice: Fix prototype warningsTony Nguyen1-1/+1
Correct reported warnings for "warning: expecting prototype for ... Prototype was for ... instead" Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
2021-02-08ice: Refactor DCB related variables out of the ice_port_info structChinh T Cao1-20/+20
Refactor the DCB related variables out of the ice_port_info_struct. The goal is to make the ice_port_info struct cleaner. Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Co-developed-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-29ice: Implement LFC workaroundDave Ertman1-33/+0
There is a bug where the LFC settings are not being preserved through a link event. The registers in question are the ones that are touched (and restored) when a set_local_mib AQ command is performed. On a link-up event, make sure that a set_local_mib is being performed. Move the function ice_aq_set_lldp_mib() from the DCB specific ice_dcb.c to ice_common.c so that the driver always has access to this AQ command. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-01ice: avoid unnecessary single-member variable-length structsBruce Allan1-2/+2
There are a number of structures that consist of a one-element array as the only struct member. Some of those are unused so remove them. Others are used to index into a buffer/array consisting of a variable number of a different data or structure type. Those are unnecessary since we can use simple pointer arithmetic or index directly into the buffer to access individual elements of the buffer/array. Additional code cleanups were done near areas affected by this change. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-02-12ice: Trivial fixesTony Nguyen1-4/+4
This is a collection of trivial fixes including fixing whitespace, typos, function headers, reverse Christmas tree, etc. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-11-06ice: Adjust DCB INIT for SW modeDave Ertman1-3/+3
Adjust ice_init_dcb to set the is_sw_lldp boolean in the case where the FW has been detected to be in an untenable state such that the driver should forcibly make sure it is off. This will ensure that the FW is in a known state. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-05ice: Allow for delayed LLDP MIB change registrationDave Ertman1-4/+35
Add an additional boolean parameter to the ice_init_dcb function. This boolean controls if the LLDP MIB change events are registered for. Also, add a new function defined ice_cfg_lldp_mib_change. The additional function is necessary to be able to register for LLDP MIB change events after calling ice_init_dcb. The net effect of these two changes is to allow a delayed registration for MIB change events so that the driver is not accepting events before it is ready for them. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-03ice: Deduce TSA value from the priority value in the CEE modeChinh T Cao1-1/+7
In CEE mode, the TSA information can be derived from the reported priority value. Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-08-23ice: Treat DCBx state NOT_STARTED as validDave Ertman1-1/+2
When a port is not cabled, but DCBx is enabled in the firmware, the status of DCBx will be NOT_STARTED. This is a valid state for FW enabled and should not be treated as a is_fw_lldp true automatically. Add the code to treat NOT_STARTED as another valid state. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-30ice: Trivial cosmetic changesAnirudh Venkataramanan1-7/+7
This patch mostly capitalizes abbreviations in code comments. Fixed some typos and removed some unnecessary newlines as well. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Refactor the LLDP MIB change event handlingUsha Ketineni1-2/+3
This patch fixes the LLDP MIB change event handling code by removing the workarounds in the current code. Added ice_dcb_need_recfg() to print the DCB configuration changes detected via MIB change event. Signed-off-by: Usha Ketineni <usha.k.ketineni@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Implement LLDP persistenceAnirudh Venkataramanan1-3/+13
Implement LLDP persistence across reboots, start and stop of LLDP agent. Add additional parameter to ice_aq_start_lldp and ice_aq_stop_lldp. Also change the ethtool private flag from "disable-fw-lldp" to "enable-fw-lldp". This change will flip the boolean logic of the functionality of the flag (on = enable, off = disable). The change in name and functionality is to differentiate between the pre-persistence and post-persistence states. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-04-18ice: Add code to control FW LLDP and DCBXAnirudh Venkataramanan1-1/+27
This patch adds code to start or stop LLDP and DCBX in firmware through use of ethtool private flags. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-04-18ice: Add code to process LLDP MIB change eventsAnirudh Venkataramanan1-3/+2
This patch adds support to process LLDP MIB change notifications sent by the firmware. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-04-18ice: Add code for DCB initialization part 3/4Anirudh Venkataramanan1-0/+463
This patch adds a new function ice_pf_dcb_cfg (and related helpers) which applies the DCB configuration obtained from the firmware. As part of this, VSIs/netdevs are updated with traffic class information. This patch requires a bit of a refactor of existing code. 1. For a MIB change event, the associated VSI is closed and brought up again. The gap between closing and opening the VSI can cause a race condition. Fix this by grabbing the rtnl_lock prior to closing the VSI and then only free it after re-opening the VSI during a MIB change event. 2. ice_sched_query_elem is used in ice_sched.c and with this patch, in ice_dcb.c as well. However, ice_dcb.c is not built when CONFIG_DCB is unset. This results in namespace warnings (ice_sched.o: Externally defined symbols with no external references) when CONFIG_DCB is unset. To avoid this move ice_sched_query_elem from ice_sched.c to ice_common.c. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-04-18ice: Add code for DCB initialization part 2/4Anirudh Venkataramanan1-0/+819
This patch introduces a new top level function ice_init_dcb (and related lower level helper functions) which continues the DCB init flow. This function uses ice_get_dcb_cfg to get, parse and store the DCB configuration. Once this is done, it sets itself up to be notified by the firmware on LLDP MIB change events. Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-04-18ice: Add code for DCB initialization part 1/4Anirudh Venkataramanan1-0/+85
This patch introduces a skeleton for ice_init_pf_dcb, the top level function for DCB initialization. Subsequent patches will add to this DCB init flow. In this patch, ice_init_pf_dcb checks if DCB is a supported capability. If so, an admin queue call to start the LLDP and DCBx in firmware is issued. If not, an error is reported. Note that we don't fail the driver init if DCB init fails. Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-05 23:13:31 +0000