summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/iavf
AgeCommit message (Collapse)AuthorFilesLines
2023-01-20iavf: schedule watchdog immediately when changing primary MACStefan Assmann1-1/+1
iavf_replace_primary_mac() utilizes queue_work() to schedule the watchdog task but that only ensures that the watchdog task is queued to run. To make sure the watchdog is executed asap use mod_delayed_work(). Without this patch it may take up to 2s until the watchdog task gets executed, which may cause long delays when setting the MAC address. Fixes: a3e839d539e0 ("iavf: Add usage of new virtchnl format to set default MAC") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-20iavf: Move netdev_update_features() into watchdog taskMarcin Szycik2-18/+17
Remove netdev_update_features() from iavf_adminq_task(), as it can cause deadlocks due to needing rtnl_lock. Instead use the IAVF_FLAG_SETUP_NETDEV_FEATURES flag to indicate that netdev features need to be updated in the watchdog task. iavf_set_vlan_offload_features() and iavf_set_queue_vlan_tag_loc() can be called directly from iavf_virtchnl_completion(). Suggested-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-20iavf: fix temporary deadlock and failure to set MAC addressMichal Schmidt4-51/+49
We are seeing an issue where setting the MAC address on iavf fails with EAGAIN after the 2.5s timeout expires in iavf_set_mac(). There is the following deadlock scenario: iavf_set_mac(), holding rtnl_lock, waits on: iavf_watchdog_task (within iavf_wq) to send a message to the PF, and iavf_adminq_task (within iavf_wq) to receive a response from the PF. In this adapter state (>=__IAVF_DOWN), these tasks do not need to take rtnl_lock, but iavf_wq is a global single-threaded workqueue, so they may get stuck waiting for another adapter's iavf_watchdog_task to run iavf_init_config_adapter(), which does take rtnl_lock. The deadlock resolves itself by the timeout in iavf_set_mac(), which results in EAGAIN returned to userspace. Let's break the deadlock loop by changing iavf_wq into a per-adapter workqueue, so that one adapter's tasks are not blocked by another's. Fixes: 35a2443d0910 ("iavf: Add waiting for response from PF in set mac") Co-developed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-10iavf/iavf_main: actually log ->src mask when talking about itDaniil Tatianin1-1/+1
This fixes a copy-paste issue where dev_err would log the dst mask even though it is clearly talking about src. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: 0075fa0fadd0 ("i40evf: Add support to apply cloud filters") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-20/+31
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-23iavf: Fix error handling in iavf_init_module()Yuan Can1-1/+8
The iavf_init_module() won't destroy workqueue when pci_register_driver() failed. Call destroy_workqueue() when pci_register_driver() failed to prevent the resource leak. Similar to the handling of u132_hcd_init in commit f276e002793c ("usb: u132-hcd: fix resource leak") Fixes: 2803b16c10ea ("i40e/i40evf: Use private workqueue") Signed-off-by: Yuan Can <yuancan@huawei.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-18iavf: Fix race condition between iavf_shutdown and iavf_removeSlawomir Laba1-9/+7
Fix a deadlock introduced by commit 974578017fc1 ("iavf: Add waiting so the port is initialized in remove") due to race condition between iavf_shutdown and iavf_remove, where iavf_remove stucks forever in while loop since iavf_shutdown already set __IAVF_REMOVE adapter state. Fix this by checking if the __IAVF_IN_REMOVE_TASK has already been set and return if so. Fixes: 974578017fc1 ("iavf: Add waiting so the port is initialized in remove") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-18iavf: remove INITIAL_MAC_SET to allow gARP to work properlyStefan Assmann2-9/+0
IAVF_FLAG_INITIAL_MAC_SET prevents waiting on iavf_is_mac_set_handled() the first time the MAC is set. This breaks gratuitous ARP because the MAC address has not been updated yet when the gARP packet is sent out. Current behaviour: $ echo 1 > /sys/class/net/ens4f0/device/sriov_numvfs iavf 0000:88:02.0: MAC address: ee:04:19:14:ec:ea $ ip addr add 192.168.1.1/24 dev ens4f0v0 $ ip link set dev ens4f0v0 up $ echo 1 > /proc/sys/net/ipv4/conf/ens4f0v0/arp_notify $ ip link set ens4f0v0 addr 00:11:22:33:44:55 07:23:41.676611 ee:04:19:14:ec:ea > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.168.1.1 tell 192.168.1.1, length 28 With IAVF_FLAG_INITIAL_MAC_SET removed: $ echo 1 > /sys/class/net/ens4f0/device/sriov_numvfs iavf 0000:88:02.0: MAC address: 3e:8a:16:a2:37:6d $ ip addr add 192.168.1.1/24 dev ens4f0v0 $ ip link set dev ens4f0v0 up $ echo 1 > /proc/sys/net/ipv4/conf/ens4f0v0/arp_notify $ ip link set ens4f0v0 addr 00:11:22:33:44:55 07:28:01.836608 00:11:22:33:44:55 > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.168.1.1 tell 192.168.1.1, length 28 Fixes: 35a2443d0910 ("iavf: Add waiting for response from PF in set mac") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-18iavf: Do not restart Tx queues after reset task failureIvan Vecera1-1/+15
After commit aa626da947e9 ("iavf: Detach device during reset task") the device is detached during reset task and re-attached at its end. The problem occurs when reset task fails because Tx queues are restarted during device re-attach and this leads later to a crash. To resolve this issue properly close the net device in cause of failure in reset task to avoid restarting of tx queues at the end. Also replace the hacky manipulation with IFF_UP flag by device close that clears properly both IFF_UP and __LINK_STATE_START flags. In these case iavf_close() does not do anything because the adapter state is already __IAVF_DOWN. Reproducer: 1) Run some Tx traffic (e.g. iperf3) over iavf interface 2) Set VF trusted / untrusted in loop [root@host ~]# cat repro.sh PF=enp65s0f0 IF=${PF}v0 ip link set up $IF ip addr add 192.168.0.2/24 dev $IF sleep 1 iperf3 -c 192.168.0.1 -t 600 --logfile /dev/null & sleep 2 while :; do ip link set $PF vf 0 trust on ip link set $PF vf 0 trust off done [root@host ~]# ./repro.sh Result: [ 2006.650969] iavf 0000:41:01.0: Failed to init adminq: -53 [ 2006.675662] ice 0000:41:00.0: VF 0 is now trusted [ 2006.689997] iavf 0000:41:01.0: Reset task did not complete, VF disabled [ 2006.696611] iavf 0000:41:01.0: failed to allocate resources during reinit [ 2006.703209] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.737011] ice 0000:41:00.0: VF 0 is now trusted [ 2006.764536] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.768919] BUG: kernel NULL pointer dereference, address: 0000000000000b4a [ 2006.776358] #PF: supervisor read access in kernel mode [ 2006.781488] #PF: error_code(0x0000) - not-present page [ 2006.786620] PGD 0 P4D 0 [ 2006.789152] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 2006.792903] ice 0000:41:00.0: VF 0 is now trusted [ 2006.793501] CPU: 4 PID: 0 Comm: swapper/4 Kdump: loaded Not tainted 6.1.0-rc3+ #2 [ 2006.805668] Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.4 04/13/2022 [ 2006.815915] RIP: 0010:iavf_xmit_frame_ring+0x96/0xf70 [iavf] [ 2006.821028] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.821572] Code: 48 83 c1 04 48 c1 e1 04 48 01 f9 48 83 c0 10 6b 50 f8 55 c1 ea 14 45 8d 64 14 01 48 39 c8 75 eb 41 83 fc 07 0f 8f e9 08 00 00 <0f> b7 45 4a 0f b7 55 48 41 8d 74 24 05 31 c9 66 39 d0 0f 86 da 00 [ 2006.845181] RSP: 0018:ffffb253004bc9e8 EFLAGS: 00010293 [ 2006.850397] RAX: ffff9d154de45b00 RBX: ffff9d15497d52e8 RCX: ffff9d154de45b00 [ 2006.856327] ice 0000:41:00.0: VF 0 is now trusted [ 2006.857523] RDX: 0000000000000000 RSI: 00000000000005a8 RDI: ffff9d154de45ac0 [ 2006.857525] RBP: 0000000000000b00 R08: ffff9d159cb010ac R09: 0000000000000001 [ 2006.857526] R10: ffff9d154de45940 R11: 0000000000000000 R12: 0000000000000002 [ 2006.883600] R13: ffff9d1770838dc0 R14: 0000000000000000 R15: ffffffffc07b8380 [ 2006.885840] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.890725] FS: 0000000000000000(0000) GS:ffff9d248e900000(0000) knlGS:0000000000000000 [ 2006.890727] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2006.909419] CR2: 0000000000000b4a CR3: 0000000c39c10002 CR4: 0000000000770ee0 [ 2006.916543] PKRU: 55555554 [ 2006.918254] ice 0000:41:00.0: VF 0 is now trusted [ 2006.919248] Call Trace: [ 2006.919250] <IRQ> [ 2006.919252] dev_hard_start_xmit+0x9e/0x1f0 [ 2006.932587] sch_direct_xmit+0xa0/0x370 [ 2006.936424] __dev_queue_xmit+0x7af/0xd00 [ 2006.940429] ip_finish_output2+0x26c/0x540 [ 2006.944519] ip_output+0x71/0x110 [ 2006.947831] ? __ip_finish_output+0x2b0/0x2b0 [ 2006.952180] __ip_queue_xmit+0x16d/0x400 [ 2006.952721] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.956098] __tcp_transmit_skb+0xa96/0xbf0 [ 2006.965148] __tcp_retransmit_skb+0x174/0x860 [ 2006.969499] ? cubictcp_cwnd_event+0x40/0x40 [ 2006.973769] tcp_retransmit_skb+0x14/0xb0 ... Fixes: aa626da947e9 ("iavf: Detach device during reset task") Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Patryk Piotrowski <patryk.piotrowski@intel.com> Cc: SlawomirX Laba <slawomirx.laba@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-18iavf: Fix a crash during reset taskIvan Vecera1-0/+1
Recent commit aa626da947e9 ("iavf: Detach device during reset task") removed netif_tx_stop_all_queues() with an assumption that Tx queues are already stopped by netif_device_detach() in the beginning of reset task. This assumption is incorrect because during reset task a potential link event can start Tx queues again. Revert this change to fix this issue. Reproducer: 1. Run some Tx traffic (e.g. iperf3) over iavf interface 2. Switch MTU of this interface in a loop [root@host ~]# cat repro.sh IF=enp2s0f0v0 iperf3 -c 192.168.0.1 -t 600 --logfile /dev/null & sleep 2 while :; do for i in 1280 1500 2000 900 ; do ip link set $IF mtu $i sleep 2 done done [root@host ~]# ./repro.sh Result: [ 306.199917] iavf 0000:02:02.0 enp2s0f0v0: NIC Link is Up Speed is 40 Gbps Full Duplex [ 308.205944] iavf 0000:02:02.0 enp2s0f0v0: NIC Link is Up Speed is 40 Gbps Full Duplex [ 310.103223] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 310.110179] #PF: supervisor write access in kernel mode [ 310.115396] #PF: error_code(0x0002) - not-present page [ 310.120526] PGD 0 P4D 0 [ 310.123057] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 310.127408] CPU: 24 PID: 183 Comm: kworker/u64:9 Kdump: loaded Not tainted 6.1.0-rc3+ #2 [ 310.135485] Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.4 04/13/2022 [ 310.145728] Workqueue: iavf iavf_reset_task [iavf] [ 310.150520] RIP: 0010:iavf_xmit_frame_ring+0xd1/0xf70 [iavf] [ 310.156180] Code: d0 0f 86 da 00 00 00 83 e8 01 0f b7 fa 29 f8 01 c8 39 c6 0f 8f a0 08 00 00 48 8b 45 20 48 8d 14 92 bf 01 00 00 00 4c 8d 3c d0 <49> 89 5f 08 8b 43 70 66 41 89 7f 14 41 89 47 10 f6 83 82 00 00 00 [ 310.174918] RSP: 0018:ffffbb5f0082caa0 EFLAGS: 00010293 [ 310.180137] RAX: 0000000000000000 RBX: ffff92345471a6e8 RCX: 0000000000000200 [ 310.187259] RDX: 0000000000000000 RSI: 000000000000000d RDI: 0000000000000001 [ 310.194385] RBP: ffff92341d249000 R08: ffff92434987fcac R09: 0000000000000001 [ 310.201509] R10: 0000000011f683b9 R11: 0000000011f50641 R12: 0000000000000008 [ 310.208631] R13: ffff923447500000 R14: 0000000000000000 R15: 0000000000000000 [ 310.215756] FS: 0000000000000000(0000) GS:ffff92434ee00000(0000) knlGS:0000000000000000 [ 310.223835] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 310.229572] CR2: 0000000000000008 CR3: 0000000fbc210004 CR4: 0000000000770ee0 [ 310.236696] PKRU: 55555554 [ 310.239399] Call Trace: [ 310.241844] <IRQ> [ 310.243855] ? dst_alloc+0x5b/0xb0 [ 310.247260] dev_hard_start_xmit+0x9e/0x1f0 [ 310.251439] sch_direct_xmit+0xa0/0x370 [ 310.255276] __qdisc_run+0x13e/0x580 [ 310.258848] __dev_queue_xmit+0x431/0xd00 [ 310.262851] ? selinux_ip_postroute+0x147/0x3f0 [ 310.267377] ip_finish_output2+0x26c/0x540 Fixes: aa626da947e9 ("iavf: Detach device during reset task") Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Patryk Piotrowski <patryk.piotrowski@intel.com> Cc: SlawomirX Laba <slawomirx.laba@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+2
drivers/net/can/pch_can.c ae64438be192 ("can: dev: fix skb drop check") 1dd1b521be85 ("can: remove obsolete PCH CAN driver") https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-09iavf: Fix VF driver counting VLAN 0 filtersMichal Jaron1-0/+2
VF driver mistakenly counts VLAN 0 filters, when no PF driver counts them. Do not count VLAN 0 filters, when VLAN_V2 is engaged. Counting those filters in, will affect filters size by -1, when sending batched VLAN addition message. Fixes: 968996c070ef ("iavf: Fix VLAN_V2 addition/rejection") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02iavf: Change information about device removal in dmesgBartosz Staszewski1-1/+1
Changed information about device removal in dmesg. In function iavf_remove changed printed message from "Remove" to "Removing" after hot vf plug/unplug. Reason for this change is that, that "Removing" word is better because it is clearer for the user that the device is already being removed rather than implying that the user should remove this device. Signed-off-by: Bartosz Staszewski <bartoszx.staszewski@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02iavf: Replace __FUNCTION__ with __func__ye xingchen1-1/+1
__FUNCTION__ exists only for backwards compatibility reasons with old gcc versions. Replace it with __func__. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-10-28net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers).Thomas Gleixner1-4/+4
Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski1-1/+1
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-11/+14
drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-19iavf: Fix set max MTU size with port VLAN and jumbo framesMichal Jaron1-2/+5
After setting port VLAN and MTU to 9000 on VF with ice driver there was an iavf error "PF returned error -5 (IAVF_ERR_PARAM) to our request 6". During queue configuration, VF's max packet size was set to IAVF_MAX_RXBUFFER but on ice max frame size was smaller by VLAN_HLEN due to making some space for port VLAN as VF is not aware whether it's in a port VLAN. This mismatch in sizes caused ice to reject queue configuration with ERR_PARAM error. Proper max_mtu is sent from ice PF to VF with GET_VF_RESOURCES msg but VF does not look at this. In iavf change max_frame from IAVF_MAX_RXBUFFER to max_mtu received from pf with GET_VF_RESOURCES msg to make vf's max_frame_size dependent from pf. Add check if received max_mtu is not in eligible range then set it to IAVF_MAX_RXBUFFER. Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-19iavf: Fix bad page stateNorbert Zulinski1-2/+2
Fix bad page state, free inappropriate page in handling dummy descriptor. iavf_build_skb now has to check not only if rx_buffer is NULL but also if size is zero, same thing in iavf_clean_rx_irq. Without this patch driver would free page that will be used by napi_build_skb. Fixes: a9f49e006030 ("iavf: Fix handling of dummy receive descriptors") Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-08iavf: Fix cached head and tail value for iavf_get_tx_pendingBrett Creeley1-1/+4
The underlying hardware may or may not allow reading of the head or tail registers and it really makes no difference if we use the software cached values. So, always used the software cached values. Fixes: 9c6c12595b73 ("i40e: Detection and recovery of TX queue hung logic moved to service_task from tx_timeout") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Co-developed-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-08iavf: Fix change VF's mac addressSylwester Dziedziuch1-6/+3
Previously changing mac address gives false negative because ip link set <interface> address <MAC> return with RTNLINK: Permission denied. In iavf_set_mac was check if PF handled our mac set request, even before filter was added to list. Because this check returns always true and it never waits for PF's response. Move iavf_is_mac_handled to wait_event_interruptible_timeout instead of false. Now it will wait for PF's response and then check if address was added or rejected. Fixes: 35a2443d0910 ("iavf: Add waiting for response from PF in set mac") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Co-developed-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni1-3/+11
drivers/net/ethernet/freescale/fec.h 7d650df99d52 ("net: fec: add pm_qos support on imx6q platform") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-06iavf: Fix race between iavf_close and iavf_reset_taskMichal Jaron1-36/+141
During stress tests with adding VF to namespace and changing vf's trust there was a race between iavf_reset_task and iavf_close. Sometimes when IAVF_FLAG_AQ_DISABLE_QUEUES from iavf_close was sent to PF after reset and before IAVF_AQ_GET_CONFIG was sent then PF returns error IAVF_NOT_SUPPORTED to disable queues request and following requests. There is need to get_config before other aq_required will be send but iavf_close clears all flags, if get_config was not sent before iavf_close, then it will not be send at all. In case when IAVF_FLAG_AQ_GET_OFFLOAD_VLAN_V2_CAPS was sent before IAVF_FLAG_AQ_DISABLE_QUEUES then there was rtnl_lock deadlock between iavf_close and iavf_adminq_task until iavf_close timeouts and disable queues was sent after iavf_close ends. There was also a problem with sending delete/add filters. Sometimes when filters was not yet added to PF and in iavf_close all filters was set to remove there might be a try to remove nonexistent filters on PF. Add aq_required_tmp to save aq_required flags and send them after disable_queues will be handled. Clear flags given to iavf_down different than IAVF_FLAG_AQ_GET_CONFIG as this flag is necessary to sent other aq_required. Remove some flags that we don't want to send as we are in iavf_close and we want to disable interface. Remove filters which was not yet sent and send del filters flags only when there are filters to remove. Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-02iavf: Detach device during reset taskIvan Vecera1-3/+11
iavf_reset_task() takes crit_lock at the beginning and holds it during whole call. The function subsequently calls iavf_init_interrupt_scheme() that grabs RTNL. Problem occurs when userspace initiates during the reset task any ndo callback that runs under RTNL like iavf_open() because some of that functions tries to take crit_lock. This leads to classic A-B B-A deadlock scenario. To resolve this situation the device should be detached in iavf_reset_task() prior taking crit_lock to avoid subsequent ndos running under RTNL and reattach the device at the end. Fixes: 62fe2a865e6d ("i40evf: add missing rtnl_lock() around i40evf_set_interrupt_capability") Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Patryk Piotrowski <patryk.piotrowski@intel.com> Cc: SlawomirX Laba <slawomirx.laba@intel.com> Tested-by: Vitaly Grinberg <vgrinber@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang1-3/+3
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-12iavf: Fix deadlock in initializationIvan Vecera1-1/+10
Fix deadlock that occurs when iavf interface is a part of failover configuration. 1. Mutex crit_lock is taken at the beginning of iavf_watchdog_task() 2. Function iavf_init_config_adapter() is called when adapter state is __IAVF_INIT_CONFIG_ADAPTER 3. iavf_init_config_adapter() calls register_netdevice() that emits NETDEV_REGISTER event 4. Notifier function failover_event() then calls net_failover_slave_register() that calls dev_open() 5. dev_open() calls iavf_open() that tries to take crit_lock in end-less loop Stack trace: ... [ 790.251876] usleep_range_state+0x5b/0x80 [ 790.252547] iavf_open+0x37/0x1d0 [iavf] [ 790.253139] __dev_open+0xcd/0x160 [ 790.253699] dev_open+0x47/0x90 [ 790.254323] net_failover_slave_register+0x122/0x220 [net_failover] [ 790.255213] failover_slave_register.part.7+0xd2/0x180 [failover] [ 790.256050] failover_event+0x122/0x1ab [failover] [ 790.256821] notifier_call_chain+0x47/0x70 [ 790.257510] register_netdevice+0x20f/0x550 [ 790.258263] iavf_watchdog_task+0x7c8/0xea0 [iavf] [ 790.259009] process_one_work+0x1a7/0x360 [ 790.259705] worker_thread+0x30/0x390 To fix the situation we should check the current adapter state after first unsuccessful mutex_trylock() and return with -EBUSY if it is __IAVF_INIT_CONFIG_ADAPTER. Fixes: 226d528512cf ("iavf: fix locking of critical sections") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-12iavf: Fix reset error handlingPrzemyslaw Patynowski1-3/+6
Do not call iavf_close in iavf_reset_task error handling. Doing so can lead to double call of napi_disable, which can lead to deadlock there. Removing VF would lead to iavf_remove task being stuck, because it requires crit_lock, which is held by iavf_close. Call iavf_disable_vf if reset fail, so that driver will clean up remaining invalid resources. During rapid VF resets, HW can fail to setup VF mailbox. Wrong error handling can lead to iavf_remove being stuck with: [ 5218.999087] iavf 0000:82:01.0: Failed to init adminq: -53 ... [ 5267.189211] INFO: task repro.sh:11219 blocked for more than 30 seconds. [ 5267.189520] Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1 [ 5267.189764] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 5267.190062] task:repro.sh state:D stack: 0 pid:11219 ppid: 8162 flags:0x00000000 [ 5267.190347] Call Trace: [ 5267.190647] <TASK> [ 5267.190927] __schedule+0x460/0x9f0 [ 5267.191264] schedule+0x44/0xb0 [ 5267.191563] schedule_preempt_disabled+0x14/0x20 [ 5267.191890] __mutex_lock.isra.12+0x6e3/0xac0 [ 5267.192237] ? iavf_remove+0xf9/0x6c0 [iavf] [ 5267.192565] iavf_remove+0x12a/0x6c0 [iavf] [ 5267.192911] ? _raw_spin_unlock_irqrestore+0x1e/0x40 [ 5267.193285] pci_device_remove+0x36/0xb0 [ 5267.193619] device_release_driver_internal+0xc1/0x150 [ 5267.193974] pci_stop_bus_device+0x69/0x90 [ 5267.194361] pci_stop_and_remove_bus_device+0xe/0x20 [ 5267.194735] pci_iov_remove_virtfn+0xba/0x120 [ 5267.195130] sriov_disable+0x2f/0xe0 [ 5267.195506] ice_free_vfs+0x7d/0x2f0 [ice] [ 5267.196056] ? pci_get_device+0x4f/0x70 [ 5267.196496] ice_sriov_configure+0x78/0x1a0 [ice] [ 5267.196995] sriov_numvfs_store+0xfe/0x140 [ 5267.197466] kernfs_fop_write_iter+0x12e/0x1c0 [ 5267.197918] new_sync_write+0x10c/0x190 [ 5267.198404] vfs_write+0x24e/0x2d0 [ 5267.198886] ksys_write+0x5c/0xd0 [ 5267.199367] do_syscall_64+0x3a/0x80 [ 5267.199827] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 5267.200317] RIP: 0033:0x7f5b381205c8 [ 5267.200814] RSP: 002b:00007fff8c7e8c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 5267.201981] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5b381205c8 [ 5267.202620] RDX: 0000000000000002 RSI: 00005569420ee900 RDI: 0000000000000001 [ 5267.203426] RBP: 00005569420ee900 R08: 000000000000000a R09: 00007f5b38180820 [ 5267.204327] R10: 000000000000000a R11: 0000000000000246 R12: 00007f5b383c06e0 [ 5267.205193] R13: 0000000000000002 R14: 00007f5b383bb880 R15: 0000000000000002 [ 5267.206041] </TASK> [ 5267.206970] Kernel panic - not syncing: hung_task: blocked tasks [ 5267.207809] CPU: 48 PID: 551 Comm: khungtaskd Kdump: loaded Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1 [ 5267.208726] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.11.0 11/02/2019 [ 5267.209623] Call Trace: [ 5267.210569] <TASK> [ 5267.211480] dump_stack_lvl+0x33/0x42 [ 5267.212472] panic+0x107/0x294 [ 5267.213467] watchdog.cold.8+0xc/0xbb [ 5267.214413] ? proc_dohung_task_timeout_secs+0x30/0x30 [ 5267.215511] kthread+0xf4/0x120 [ 5267.216459] ? kthread_complete_and_exit+0x20/0x20 [ 5267.217505] ret_from_fork+0x22/0x30 [ 5267.218459] </TASK> Fixes: f0db78928783 ("i40evf: use netdev variable in reset task") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-12iavf: Fix NULL pointer dereference in iavf_get_link_ksettingsPrzemyslaw Patynowski1-1/+1
Fix possible NULL pointer dereference, due to freeing of adapter->vf_res in iavf_init_get_resources. Previous commit introduced a regression, where receiving IAVF_ERR_ADMIN_QUEUE_NO_WORK from iavf_get_vf_config would free adapter->vf_res. However, netdev is still registered, so ethtool_ops can be called. Calling iavf_get_link_ksettings with no vf_res, will result with: [ 9385.242676] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 9385.242683] #PF: supervisor read access in kernel mode [ 9385.242686] #PF: error_code(0x0000) - not-present page [ 9385.242690] PGD 0 P4D 0 [ 9385.242696] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [ 9385.242701] CPU: 6 PID: 3217 Comm: pmdalinux Kdump: loaded Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1 [ 9385.242708] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.11.0 11/02/2019 [ 9385.242710] RIP: 0010:iavf_get_link_ksettings+0x29/0xd0 [iavf] [ 9385.242745] Code: 00 0f 1f 44 00 00 b8 01 ef ff ff 48 c7 46 30 00 00 00 00 48 c7 46 38 00 00 00 00 c6 46 0b 00 66 89 46 08 48 8b 87 68 0e 00 00 <f6> 40 08 80 75 50 8b 87 5c 0e 00 00 83 f8 08 74 7a 76 1d 83 f8 20 [ 9385.242749] RSP: 0018:ffffc0560ec7fbd0 EFLAGS: 00010246 [ 9385.242755] RAX: 0000000000000000 RBX: ffffc0560ec7fc08 RCX: 0000000000000000 [ 9385.242759] RDX: ffffffffc0ad4550 RSI: ffffc0560ec7fc08 RDI: ffffa0fc66674000 [ 9385.242762] RBP: 00007ffd1fb2bf50 R08: b6a2d54b892363ee R09: ffffa101dc14fb00 [ 9385.242765] R10: 0000000000000000 R11: 0000000000000004 R12: ffffa0fc66674000 [ 9385.242768] R13: 0000000000000000 R14: ffffa0fc66674000 R15: 00000000ffffffa1 [ 9385.242771] FS: 00007f93711a2980(0000) GS:ffffa0fad72c0000(0000) knlGS:0000000000000000 [ 9385.242775] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9385.242778] CR2: 0000000000000008 CR3: 0000000a8e61c003 CR4: 00000000003706e0 [ 9385.242781] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 9385.242784] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 9385.242787] Call Trace: [ 9385.242791] <TASK> [ 9385.242793] ethtool_get_settings+0x71/0x1a0 [ 9385.242814] __dev_ethtool+0x426/0x2f40 [ 9385.242823] ? slab_post_alloc_hook+0x4f/0x280 [ 9385.242836] ? kmem_cache_alloc_trace+0x15d/0x2f0 [ 9385.242841] ? dev_ethtool+0x59/0x170 [ 9385.242848] dev_ethtool+0xa7/0x170 [ 9385.242856] dev_ioctl+0xc3/0x520 [ 9385.242866] sock_do_ioctl+0xa0/0xe0 [ 9385.242877] sock_ioctl+0x22f/0x320 [ 9385.242885] __x64_sys_ioctl+0x84/0xc0 [ 9385.242896] do_syscall_64+0x3a/0x80 [ 9385.242904] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 9385.242918] RIP: 0033:0x7f93702396db [ 9385.242923] Code: 73 01 c3 48 8b 0d ad 57 38 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 57 38 00 f7 d8 64 89 01 48 [ 9385.242927] RSP: 002b:00007ffd1fb2bf18 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 9385.242932] RAX: ffffffffffffffda RBX: 000055671b1d2fe0 RCX: 00007f93702396db [ 9385.242935] RDX: 00007ffd1fb2bf20 RSI: 0000000000008946 RDI: 0000000000000007 [ 9385.242937] RBP: 00007ffd1fb2bf20 R08: 0000000000000003 R09: 0030763066307330 [ 9385.242940] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd1fb2bf80 [ 9385.242942] R13: 0000000000000007 R14: 0000556719f6de90 R15: 00007ffd1fb2c1b0 [ 9385.242948] </TASK> [ 9385.242949] Modules linked in: iavf(E) xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nft_compat nf_nat_tftp nft_objref nf_conntrack_tftp bridge stp llc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables rfkill nfnetlink vfat fat irdma ib_uverbs ib_core intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm iTCO_wdt iTCO_vendor_support ice irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl i40e pcspkr intel_cstate joydev mei_me intel_uncore mxm_wmi mei ipmi_ssif lpc_ich ipmi_si acpi_power_meter xfs libcrc32c mgag200 i2c_algo_bit drm_shmem_helper drm_kms_helper sd_mod t10_pi crc64_rocksoft crc64 syscopyarea sg sysfillrect sysimgblt fb_sys_fops drm ixgbe ahci libahci libata crc32c_intel mdio dca wmi dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ 9385.243065] [last unloaded: iavf] Dereference happens in if (ADV_LINK_SUPPORT(adapter)) statement Fixes: 209f2f9c7181 ("iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 negotiation") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-12iavf: Fix adminq error handlingPrzemyslaw Patynowski1-2/+13
iavf_alloc_asq_bufs/iavf_alloc_arq_bufs allocates with dma_alloc_coherent memory for VF mailbox. Free DMA regions for both ASQ and ARQ in case error happens during configuration of ASQ/ARQ registers. Without this change it is possible to see when unloading interface: 74626.583369: dma_debug_device_change: device driver has pending DMA allocations while released from device [count=32] One of leaked entries details: [device address=0x0000000b27ff9000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent] Fixes: d358aa9a7a2d ("i40evf: init code and hardware support") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni2-2/+50
Conflicts: net/ax25/af_ax25.c d7c4c9e075f8c ("ax25: fix incorrect dev_tracker usage") d62607c3fe459 ("net: rename reference+tracking helpers") drivers/net/netdevsim/fib.c 180a6a3ee60a ("netdevsim: fib: Fix reference count leak on route deletion failure") 012ec02ae441 ("netdevsim: convert driver to use unlocked devlink API during init/fini") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-29iavf: Fix 'tc qdisc show' listing too many queuesPrzemyslaw Patynowski2-0/+26
Fix tc qdisc show dev <ethX> root displaying too many fq_codel qdiscs. tc_modify_qdisc, which is caller of ndo_setup_tc, expects driver to call netif_set_real_num_tx_queues, which prepares qdiscs. Without this patch, fq_codel qdiscs would not be adjusted to number of queues on VF. e.g.: tc qdisc show dev <ethX> qdisc mq 0: root qdisc fq_codel 0: parent :4 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64 qdisc fq_codel 0: parent :3 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64 qdisc fq_codel 0: parent :2 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64 qdisc fq_codel 0: parent :1 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64 tc qdisc add dev <ethX> root mqprio num_tc 2 map 1 0 0 0 0 0 0 0 queues 1@0 1@1 hw 1 mode channel shaper bw_rlimit max_rate 5000Mbit 150Mbit tc qdisc show dev <ethX> qdisc mqprio 8003: root tc 2 map 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 queues:(0:0) (1:1) mode:channel shaper:bw_rlimit max_rate:5Gbit 150Mbit qdisc fq_codel 0: parent 8003:4 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64 qdisc fq_codel 0: parent 8003:3 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64 qdisc fq_codel 0: parent 8003:2 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64 qdisc fq_codel 0: parent 8003:1 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64 While after fix: tc qdisc add dev <ethX> root mqprio num_tc 2 map 1 0 0 0 0 0 0 0 queues 1@0 1@1 hw 1 mode channel shaper bw_rlimit max_rate 5000Mbit 150Mbit tc qdisc show dev <ethX> #should show 2, shows 4 qdisc mqprio 8004: root tc 2 map 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 queues:(0:0) (1:1) mode:channel shaper:bw_rlimit max_rate:5Gbit 150Mbit qdisc fq_codel 0: parent 8004:2 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64 qdisc fq_codel 0: parent 8004:1 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64 Fixes: d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Co-developed-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Co-developed-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-29iavf: Fix max_rate limitingPrzemyslaw Patynowski2-2/+24
Fix max_rate option in TC, check for proper quanta boundaries. Check for minimum value provided and if it fits expected 50Mbps quanta. Without this patch, iavf could send settings for max_rate limiting that would be accepted from by PF even the max_rate option is less than expected 50Mbps quanta. It results in no rate limiting on traffic as rate limiting will be floored to 0. Example: tc qdisc add dev $vf root mqprio num_tc 3 map 0 2 1 queues \ 2@0 2@2 2@4 hw 1 mode channel shaper bw_rlimit \ max_rate 50Mbps 500Mbps 500Mbps Should limit TC0 to circa 50 Mbps tc qdisc add dev $vf root mqprio num_tc 3 map 0 2 1 queues \ 2@0 2@2 2@4 hw 1 mode channel shaper bw_rlimit \ max_rate 0Mbps 100Kbit 500Mbps Should return error Fixes: d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jun Zhang <xuejun.zhang@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-22iavf: Check for duplicate TC flower filter before parsingAvinash Dayanand1-22/+33
Record of all the TC flower filters are kept for local book keeping, so take advantage of that and check for duplicate filter even before sending a request to the PF driver. Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Signed-off-by: Jun Zhang <xuejun.zhang@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski5-26/+81
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18iavf: Fix missing state logsPrzemyslaw Patynowski1-0/+4
Fix debug prints, by adding missing state prints. Extend iavf_state_str by strings for __IAVF_INIT_EXTENDED_CAPS and __IAVF_INIT_CONFIG_ADAPTER. Without this patch, when enabling debug prints for iavf.h, user will see: iavf 0000:06:0e.0: state transition from:__IAVF_INIT_GET_RESOURCES to:__IAVF_UNKNOWN_STATE iavf 0000:06:0e.0: state transition from:__IAVF_UNKNOWN_STATE to:__IAVF_UNKNOWN_STATE Fixes: 605ca7c5c670 ("iavf: Fix kernel BUG in free_msi_irqs") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jun Zhang <xuejun.zhang@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-18iavf: Fix handling of dummy receive descriptorsPrzemyslaw Patynowski1-3/+2
Fix memory leak caused by not handling dummy receive descriptor properly. iavf_get_rx_buffer now sets the rx_buffer return value for dummy receive descriptors. Without this patch, when the hardware writes a dummy descriptor, iavf would not free the page allocated for the previous receive buffer. This is an unlikely event but can still happen. [Jesse: massaged commit message] Fixes: efa14c398582 ("iavf: allow null RX descriptors") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-18iavf: Disallow changing rx/tx-frames and rx/tx-frames-irqPrzemyslaw Patynowski4-13/+1
Remove from supported_coalesce_params ETHTOOL_COALESCE_MAX_FRAMES and ETHTOOL_COALESCE_MAX_FRAMES_IRQ. As tx-frames-irq allowed user to change budget for iavf_clean_tx_irq, remove work_limit and use define for budget. Without this patch there would be possibility to change rx/tx-frames and rx/tx-frames-irq, which for rx/tx-frames did nothing, while for rx/tx-frames-irq it changed rx/tx-frames and only changed budget for cleaning NAPI poll. Fixes: fbb7ddfef253 ("i40evf: core ethtool functionality") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jun Zhang <xuejun.zhang@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-18iavf: Fix VLAN_V2 addition/rejectionPrzemyslaw Patynowski3-10/+74
Fix VLAN addition, so that PF driver does not reject whole VLAN batch. Add VLAN reject handling, so rejected VLANs, won't litter VLAN filter list. Fix handling of active_(c/s)vlans, so it will be possible to re-add VLAN filters for user. Without this patch, after changing trust to off, with VLAN filters saturated, no VLAN is added, due to PF rejecting addition. Fixes: 92fc50859872 ("iavf: Restrict maximum VLAN filters for VIRTCHNL_VF_OFFLOAD_VLAN_V2") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-30intel/iavf:fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'a'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-30intel: remove unused macrosJesse Brandeburg1-4/+0
As found by the compile option -Wunused-macros, remove these macros that are never used by the code. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-09iavf: Fix issue with MAC address of VF shown as zeroMichal Wilczynski1-1/+1
After reinitialization of iavf, ice driver gets VIRTCHNL_OP_ADD_ETH_ADDR message with incorrectly set type of MAC address. Hardware address should have is_primary flag set as true. This way ice driver knows what it has to set as a MAC address. Check if the address is primary in iavf_add_filter function and set flag accordingly. To test set all-zero MAC on a VF. This triggers iavf re-initialization and VIRTCHNL_OP_ADD_ETH_ADDR message gets sent to PF. For example: ip link set dev ens785 vf 0 mac 00:00:00:00:00:00 This triggers re-initialization of iavf. New MAC should be assigned. Now check if MAC is non-zero: ip link show dev ens785 Fixes: a3e839d539e0 ("iavf: Add usage of new virtchnl format to set default MAC") Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-07iavf: Add waiting for response from PF in set macMateusz Palczewski3-21/+174
Make iavf_set_mac synchronous by waiting for a response from a PF. Without this iavf_set_mac is always returning success even though set_mac can be rejected by a PF. This ensures that when set_mac exits netdev MAC is updated. This is needed for sending ARPs with correct MAC after changing VF's MAC. This is also needed by bonding module. Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-08Revert "iavf: Fix deadlock occurrence during resetting VF interface"Mateusz Palczewski1-5/+2
This change caused a regression with resetting while changing network namespaces. By clearing the IFF_UP flag, the kernel now thinks it has fully closed the device. This reverts commit 0cc318d2e8408bc0ffb4662a0c3e5e57005ac6ff. Fixes: 0cc318d2e840 ("iavf: Fix deadlock occurrence during resetting VF interface") Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+14
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17iavf: Fix hang during reboot/shutdownIvan Vecera1-0/+7
Recent commit 974578017fc1 ("iavf: Add waiting so the port is initialized in remove") adds a wait-loop at the beginning of iavf_remove() to ensure that port initialization is finished prior unregistering net device. This causes a regression in reboot/shutdown scenario because in this case callback iavf_shutdown() is called and this callback detaches the device, makes it down if it is running and sets its state to __IAVF_REMOVE. Later shutdown callback of associated PF driver (e.g. ice_shutdown) is called. That callback calls among other things sriov_disable() that calls indirectly iavf_remove() (see stack trace below). As the adapter state is already __IAVF_REMOVE then the mentioned loop is end-less and shutdown process hangs. The patch fixes this by checking adapter's state at the beginning of iavf_remove() and skips the rest of the function if the adapter is already in remove state (shutdown is in progress). Reproducer: 1. Create VF on PF driven by ice or i40e driver 2. Ensure that the VF is bound to iavf driver 3. Reboot [52625.981294] sysrq: SysRq : Show Blocked State [52625.988377] task:reboot state:D stack: 0 pid:17359 ppid: 1 f2 [52625.996732] Call Trace: [52625.999187] __schedule+0x2d1/0x830 [52626.007400] schedule+0x35/0xa0 [52626.010545] schedule_hrtimeout_range_clock+0x83/0x100 [52626.020046] usleep_range+0x5b/0x80 [52626.023540] iavf_remove+0x63/0x5b0 [iavf] [52626.027645] pci_device_remove+0x3b/0xc0 [52626.031572] device_release_driver_internal+0x103/0x1f0 [52626.036805] pci_stop_bus_device+0x72/0xa0 [52626.040904] pci_stop_and_remove_bus_device+0xe/0x20 [52626.045870] pci_iov_remove_virtfn+0xba/0x120 [52626.050232] sriov_disable+0x2f/0xe0 [52626.053813] ice_free_vfs+0x7c/0x340 [ice] [52626.057946] ice_remove+0x220/0x240 [ice] [52626.061967] ice_shutdown+0x16/0x50 [ice] [52626.065987] pci_device_shutdown+0x34/0x60 [52626.070086] device_shutdown+0x165/0x1c5 [52626.074011] kernel_restart+0xe/0x30 [52626.077593] __do_sys_reboot+0x1d2/0x210 [52626.093815] do_syscall_64+0x5b/0x1a0 [52626.097483] entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 974578017fc1 ("iavf: Add waiting so the port is initialized in remove") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Link: https://lore.kernel.org/r/20220317104524.2802848-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-15iavf: Fix double free in iavf_reset_taskPrzemyslaw Patynowski1-1/+7
Fix double free possibility in iavf_disable_vf, as crit_lock is freed in caller, iavf_reset_task. Add kernel-doc for iavf_disable_vf. Remove mutex_unlock in iavf_disable_vf. Without this patch there is double free scenario, when calling iavf_reset_task. Fixes: e85ff9c631e1 ("iavf: Fix deadlock in iavf_reset_task") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-4/+50
net/dsa/dsa2.c commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails") commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master") https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/ drivers/net/ethernet/intel/ice/ice.h commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU") commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device") https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/ drivers/staging/gdm724x/gdm_lte.c commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()") commit 4bcc4249b4cf ("staging: Use netif_rx().") https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-08iavf: Fix adopting new combined settingMichal Maloszewski2-4/+10
In some cases overloaded flag IAVF_FLAG_REINIT_ITR_NEEDED which should indicate that interrupts need to be completely reinitialized during reset leads to RTNL deadlocks using ethtool -C while a reset is in progress. To fix, it was added a new flag IAVF_FLAG_REINIT_MSIX_NEEDED used to trigger MSI-X reinit. New combined setting is fixed adopt after VF reset. This has been implemented by call reinit interrupt scheme during VF reset. Without this fix new combined setting has never been adopted. Fixes: 209f2f9c7181 ("iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 negotiation") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-08iavf: Fix handling of vlan strip virtual channel messagesMichal Maloszewski1-0/+40
Modify netdev->features for vlan stripping based on virtual channel messages received from the PF. Change is needed to synchronize vlan strip status between PF sysfs and iavf ethtool. Fixes: 5951a2b9812d ("iavf: Fix VLAN feature flags after VFR") Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-05 07:01:20 +0000