summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/e1000e/netdev.c
AgeCommit message (Collapse)AuthorFilesLines
2022-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+2
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30e1000e: Fix TX dispatch conditionAkihiko Odaki1-2/+2
e1000_xmit_frame is expected to stop the queue and dispatch frames to hardware if there is not sufficient space for the next frame in the buffer, but sometimes it failed to do so because the estimated maximum size of frame was wrong. As the consequence, the later invocation of e1000_xmit_frame failed with NETDEV_TX_BUSY, and the frame in the buffer remained forever, resulting in a watchdog failure. This change fixes the estimated size by making it match with the condition for NETDEV_TX_BUSY. Apparently, the old estimation failed to account for the following lines which determines the space requirement for not causing NETDEV_TX_BUSY: ``` /* reserve a descriptor for the offload context */ if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL)) count++; count++; count += DIV_ROUND_UP(len, adapter->tx_fifo_limit); ``` This issue was found when running http-stress02 test included in Linux Test Project 20220930 on QEMU with the following commandline: ``` qemu-system-x86_64 -M q35,accel=kvm -m 8G -smp 8 -drive if=virtio,format=raw,file=root.img,file.locking=on -device e1000e,netdev=netdev -netdev tap,script=ifup,downscript=no,id=netdev ``` Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02e1000e: Remove unnecessary use of kmap_atomic()Anirudh Venkataramanan1-15/+5
alloc_rx_buf() allocates ps_page->page and buffer_info->page using either GFP_ATOMIC or GFP_KERNEL. Memory allocated with GFP_KERNEL/GFP_ATOMIC can't come from highmem and so there's no need to kmap() them. Just use page_address(). I don't have access to a 32-bit system so did some limited testing on qemu (qemu-system-i386 -m 4096 -smp 4 -device e1000e) with a 32-bit Debian 11.04 image. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Suggested-by: Ira Weiny <ira.weiny@intel.com> Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02e1000e: Add e1000e trace moduleSasha Neftin1-0/+4
Add tracepoints to the driver via a new file e1000e_trace.h and some new trace calls added in interesting places in the driver. Add some tracing for s0ix flows to help in a debug of shared resources with the CSME firmware. The idea here is that tracepoints have such low performance cost when disabled that we can leave these in the upstream driver. Performance not affected, and this can be very useful for debugging and adding new trace events to paths in the future. Usage: echo "e1000e_trace:*" > /sys/kernel/debug/tracing/set_event echo 1 > /sys/kernel/debug/tracing/events/e1000e_trace/enable Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02e1000e: Add support for the next LOM generationSasha Neftin1-0/+10
Add devices IDs for the next LOM generations that will be available on the next Intel Client platforms. This patch provides the initial support for these devices. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02e1000e: Separate MTP board type from ADPSasha Neftin1-8/+9
We have the same LAN controller on different PCH's. Separate MTP board type from an ADP which will allow for specific fixes to be applied for MTP platforms. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski1-1/+1
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang1-3/+3
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28e1000e: convert .adjfreq to .adjfineJacob Keller1-2/+2
The PTP implementation for the e1000e driver uses the older .adjfreq method. This method takes an adjustment in parts per billion. The newer .adjfine implementation uses scaled_ppm. The use of scaled_ppm allows for finer grained adjustments and is preferred over using the older implementation. Make use of mul_u64_u64_div_u64 in order to handle possible overflow of the multiplication used to calculate the desired adjustment to the hardware increment value. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-26/+4
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-14Revert "e1000e: Fix possible HW unit hang after an s0ix exit"Sasha Neftin1-26/+0
This reverts commit 1866aa0d0d6492bc2f8d22d0df49abaccf50cddd. Commit 1866aa0d0d64 ("e1000e: Fix possible HW unit hang after an s0ix exit") was a workaround for CSME problem to handle messages comes via H2ME mailbox. This problem has been fixed by patch "e1000e: Enable the GPT clock before sending message to the CSME". Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821 Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-14e1000e: Enable GPT clock before sending message to CSMESasha Neftin1-0/+4
On corporate (CSME) ADL systems, the Ethernet Controller may stop working ("HW unit hang") after exiting from the s0ix state. The reason is that CSME misses the message sent by the host. Enabling the dynamic GPT clock solves this problem. This clock is cleared upon HW initialization. Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821 Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-02net: add skb_[inner_]tcp_all_headers helpersEric Dumazet1-2/+2
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)" to compute headers length for a TCP packet, but others use more convoluted (but equivalent) ways. Add skb_tcp_all_headers() and skb_inner_tcp_all_headers() helpers to harmonize this a bit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+26
net/batman-adv/hard-interface.c commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check") commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message") https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/ net/smc/af_smc.c commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails") commit 462791bbfa35 ("net/smc: add sysctl interface for SMC") https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-28e1000e: Fix possible HW unit hang after an s0ix exitSasha Neftin1-0/+26
Disable the OEM bit/Gig Disable/restart AN impact and disable the PHY LAN connected device (LCD) reset during power management flows. This fixes possible HW unit hangs on the s0ix exit on some corporate ADL platforms. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821 Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Suggested-by: Nir Efrati <nir.efrati@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-18/+21
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01e1000e: Handshake with CSME starts from ADL platformsSasha Neftin1-2/+4
Handshake with CSME/AMT on none provisioned platforms during S0ix flow is not supported on TGL platform and can cause to HW unit hang. Update the handshake with CSME flow to start from the ADL platform. Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-01e1000e: Separate ADP board type from TGPSasha Neftin1-16/+17
We have the same LAN controller on different PCH's. Separate ADP board type from a TGP which will allow for specific fixes to be applied for ADP platforms. Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-27e1000e: Remove useless DMA-32 fallback configurationChristophe JAILLET1-15/+7
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. So, if dma_set_mask_and_coherent() succeeds, 'pci_using_dac' is known to be 1. Simplify code and remove some dead code accordingly. [1]: https://lkml.org/lkml/2021/6/7/398 Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-14net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEXHangbin Liu1-4/+0
Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") the user could get bond active interface's PHC index directly. But when there is a failover, the bond active interface will change, thus the PHC index is also changed. This may break the user's program if they did not update the PHC timely. This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX. When the user wants to get the bond active interface's PHC, they need to add this flag and be aware the PHC index may be changed. With the new flag. All flag checks in current drivers are removed. Only the checking in net_hwtstamp_validate() is kept. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-22/+23
Lots of simnple overlapping additions. With a build fix from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20e1000e: Separate TGP board type from SPTSasha Neftin1-22/+23
We have the same LAN controller on different PCHs. Separate TGP board type from SPT which will allow for specific fixes to be applied for TGP platforms. Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Mark Pearson <markpearson@lenovo.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-19e1000e: Remove redundant statementluo penghao1-1/+0
This assignment statement is meaningless, because the statement will execute to the tag "set_itr_now". The clang_analyzer complains as follows: drivers/net/ethernet/intel/e1000e/netdev.c:2552:3 warning: Value stored to 'current_itr' is never read. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: luo penghao <luo.penghao@zte.com.cn> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05ethernet: use eth_hw_addr_set() for dev->addr_len casesJakub Kicinski1-2/+2
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann1-1/+1
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net/e1000e: Fix spelling mistake "The" -> "This"Tree Davies1-1/+1
There is a spelling mistake in the comment block. Signed-off-by: Tree Davies <tdavies@darkphysics.net> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add support for the next LOM generationSasha Neftin1-0/+4
Add devices IDs for the next LOM generations that will be available on the next Intel Client platforms This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add support for Lunar LakeSasha Neftin1-0/+6
Add devices IDs for the next LOM generations that will be available on the next Intel Client platform (Lunar Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Additional PHY power saving in S0ixSasha Neftin1-0/+6
After transferring the MAC-PHY interface to the SMBus set the PHY to S0ix low power idle mode. Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add polling mechanism to indicate CSME DPG exitSasha Neftin1-0/+24
Per guidance from the CSME architecture team, it may take up to 1 second for unconfiguring dynamic power gating mode. Practically it can take more time. Wait up to 2.5 seconds to indicate dynamic power gating exit from the S0ix configuration. Detect scenarios that take more than 1 second but less than 2.5 seconds will emit warning message. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add handshake with the CSME to support S0ixSasha Neftin1-154/+174
On the corporate system, the driver will ask from the CSME (manageability engine) to perform device settings are required to allow S0ix residency. This patch provides initial support. Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-01e1000e: Fix an error handling path in 'e1000_probe()'Christophe JAILLET1-0/+1
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 111b9dc5c981 ("e1000e: add aer support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-11/+13
Trivial conflict in net/netfilter/nf_tables_api.c. Duplicate fix in tools/testing/selftests/net/devlink_port_split.py - take the net-next version. skmsg, and L4 bpf - keep the bpf code but remove the flags and err params. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-24e1000e: Check the PCIm stateSasha Neftin1-11/+13
Complete to commit def4ec6dce393e ("e1000e: PCIm function state support") Check the PCIm state only on CSME systems. There is no point to do this check on non CSME systems. This patch fixes a generation a false-positive warning: "Error in exiting dmoff" Fixes: def4ec6dce39 ("e1000e: PCIm function state support") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-19net: e1000e: remove repeated word "slot" for netdev.cHao Chen1-1/+1
There are double "slot" in comment, so remove the redundant one. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+5
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-23e1000e: Fix prototype warningSasha Neftin1-3/+3
Correct report warnings in ich8lan.c, netdev.c phy.c and ptp.c files Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-19e1000e: Mark e1000e_pm_prepare() as __maybe_unusedWei Yongjun1-1/+1
The function e1000e_pm_prepare() may have no callers depending on configuration, so it must be marked __maybe_unused to avoid harmless warning: drivers/net/ethernet/intel/e1000e/netdev.c:6926:12: warning: 'e1000e_pm_prepare' defined but not used [-Wunused-function] 6926 | static int e1000e_pm_prepare(struct device *dev) | ^~~~~~~~~~~~~~~~~ Fixes: ccf8b940e5fd ("e1000e: Leverage direct_complete to speed up s2ram") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-15e1000e: Remove the runtime suspend restriction on CNP+Chen Yu1-1/+1
Although there is platform issue of runtime suspend support on CNP, it would be more flexible to let the user decide whether to disable runtime or not because: 1. This can be done in userspace via echo on > /sys/devices/pci0000\:00/0000\:00\:1f.d/power/control 2. More and more NICs would support runtime suspend, disabling the runtime suspend on them by default would impact the validation. Only disable runtime suspend on CNP in case of any user space regression. Signed-off-by: Chen Yu <yu.c.chen@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-15e1000e: Leverage direct_complete to speed up s2ramChen Yu1-1/+9
The NIC is put in runtime suspend status when there is no cable connected. As a result, it is safe to keep non-wakeup NIC in runtime suspended during s2ram because the system does not rely on the NIC plug event nor WoL to wake up the system. Besides that, unlike the s2idle, s2ram does not need to manipulate S0ix settings during suspend. This patch introduces the .prepare() for e1000e so that if the NIC is runtime suspended the subsequent suspend/resume hooks will be skipped so as to speed up the s2ram. The pm core will check whether the NIC is a wake up device so there's no need to check it again in .prepare(). DPM_FLAG_SMART_PREPARE flag should be set during probe to ask the pci subsystem to honor the driver's prepare() result. Besides, the NIC remains runtime suspended after resumed from s2ram as there is no need to resume it. Tested on i7-2600K with 82579V NIC Before the patch: e1000e 0000:00:19.0: pci_pm_suspend+0x0/0x160 returned 0 after 225146 usecs e1000e 0000:00:19.0: pci_pm_resume+0x0/0x90 returned 0 after 140588 usecs After the patch: echo disabled > //sys/devices/pci0000\:00/0000\:00\:19.0/power/wakeup becomes 0 usecs because the hooks will be skipped. Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-11e1000e: add rtnl_lock() to e1000_reset_taskVitaly Lifshits1-1/+5
A possible race condition was found in e1000_reset_task, after discovering a similar issue in igb driver via commit 024a8168b749 ("igb: reinit_locked() should be called with rtnl_lock"). Added rtnl_lock() and rtnl_unlock() to avoid this. Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-23e1000e: Export S0ix flags to ethtoolMario Limonciello1-4/+5
This flag can be used by an end user to disable S0ix flows on a buggy system or by an OEM for development purposes. If you need this flag to be persisted across reboots, it's suggested to use a udev rule to call adjust it until the kernel could have your configuration in a disallow list. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Yijun Shen <Yijun.shen@dell.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-23Revert "e1000e: disable s0ix entry and exit flows for ME systems"Mario Limonciello1-43/+2
commit e086ba2fccda ("e1000e: disable s0ix entry and exit flows for ME systems") disabled s0ix flows for systems that have various incarnations of the i219-LM ethernet controller. This changed caused power consumption regressions on the following shipping Dell Comet Lake based laptops: * Latitude 5310 * Latitude 5410 * Latitude 5410 * Latitude 5510 * Precision 3550 * Latitude 5411 * Latitude 5511 * Precision 3551 * Precision 7550 * Precision 7750 This commit was introduced because of some regressions on certain Thinkpad laptops. This comment was potentially caused by an earlier commit 632fbd5eb5b0e ("e1000e: fix S0ix flows for cable connected case"). or it was possibly caused by a system not meeting platform architectural requirements for low power consumption. Other changes made in the driver with extended timeouts are expected to make the driver more impervious to platform firmware behavior. Fixes: e086ba2fccda ("e1000e: disable s0ix entry and exit flows for ME systems") Reviewed-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Yijun Shen <Yijun.shen@dell.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-23e1000e: Only run S0ix flows if shutdown succeededMario Limonciello1-6/+7
If the shutdown failed, the part will be thawed and running S0ix flows will put it into an undefined state. Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Reviewed-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Tested-by: Yijun Shen <Yijun.shen@dell.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09e1000e: fix S0ix flow to allow S0i3.2 subset entryVitaly Lifshits1-4/+4
Changed a configuration in the flows to align with architecture requirements to achieve S0i3.2 substate. This helps both i219V and i219LM configurations. Also fixed a typo in the previous commit 632fbd5eb5b0 ("e1000e: fix S0ix flows for cable connected case"). Fixes: 632fbd5eb5b0 ("e1000e: fix S0ix flows for cable connected case"). Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Link: https://lore.kernel.org/r/20201208185632.151052-1-mario.limonciello@dell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-28e1000e: Add support for Meteor LakeSasha Neftin1-0/+6
Add devices IDs for the next LOM generations that will be available on the next Intel Client platform (Meteor Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-25intel-ethernet: clean up W=1 warnings in kdocJesse Brandeburg1-13/+37
This takes care of all of the trivial W=1 fixes in the Intel Ethernet drivers, which allows developers and maintainers to build more of the networking tree with more complete warning checks. There are three classes of kdoc warnings fixed: - cannot understand function prototype: 'x' - Excess function parameter 'x' description in 'y' - Function parameter or member 'x' not described in 'y' All of the changes were trivial comment updates on function headers. Inspired by Lee Jones' series of wireless work to do the same. Compile tested only, and passes simple test of $ git ls-files *.[ch] | egrep drivers/net/ethernet/intel | \ xargs scripts/kernel-doc -none Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+0
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-01ethernet/intel: Convert fallthrough code commentsJeff Kirsher1-16/+14
Convert all the remaining 'fall through" code comments to the newer 'fallthrough;' keyword. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-06-25net/intel: remove driver versions from Intel driversJeff Kirsher1-7/+1
As with other networking drivers, remove the unnecessary driver version from the Intel drivers. The ethtool driver information and module version will then report the kernel version instead. For ixgbe, i40e and ice drivers, the driver passes the driver version to the firmware to confirm that we are up and running. So we now pass the value of UTS_RELEASE to the firmware. This adminq call is required per the HAS document. The Device then sends an indication to the BMC that the PF driver is present. This is done using Host NC Driver Status Indication in NC-SI Get Link command or via the Host Network Controller Driver Status Change AEN. What the BMC may do with this information is implementation-dependent, but this is a standard NC-SI 1.1 command we honor per the HAS. CC: Bruce Allan <bruce.w.allan@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Alek Loktionov <aleksandr.loktionov@intel.com> CC: Kevin Liedtke <kevin.d.liedtke@intel.com> CC: Aaron Rowden <aaron.f.rowden@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-08 14:56:37 +0000