summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/raw/stm32_fmc2_nand.c
AgeCommit message (Collapse)AuthorFilesLines
2022-09-21mtd: rawnand: stm32_fmc2: switch to using devm_fwnode_gpiod_get()Dmitry Torokhov1-3/+2
I would like to stop exporting OF-specific devm_gpiod_get_from_of_node() so that gpiolib can be cleaned a bit, so let's switch to the generic fwnode property API. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220903-gpiod_get_from_of_node-remove-v1-3-b29adfb27a6c@gmail.com
2022-09-21mtd: rawnand: stm32_fmc2: Fix dma_map_sg error checkJack Wang1-3/+5
dma_map_sg return 0 on error, in case of error return -EIO. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Christophe Kerello <christophe.kerello@foss.st.com> Cc: Cai Huoqing <cai.huoqing@linux.dev> Cc: linux-mtd@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: Christophe Kerello <christophe.kerello@foss.st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220819060801.10443-5-jinpu.wang@ionos.com
2022-02-18mtd: rawnand: stm32_fmc2: Add NAND Write Protect supportChristophe Kerello1-1/+39
This patch adds the support of the WP# signal. WP will be disabled in probe/resume callbacks and will be enabled in remove/suspend callbacks. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220217144755.270679-3-christophe.kerello@foss.st.com
2021-09-14mtd: rawnand: stm32_fmc2: Make use of the helper function ↵Cai Huoqing1-6/+2
devm_platform_ioremap_resource() Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Reviewed-by: Christophe Kerello <christophe.kerello@foss.st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210901074222.9433-1-caihuoqing@baidu.com
2021-03-11mtd: rawnand: stm32_fmc2: Fix fall-through warnings for ClangGustavo A. R. Silva1-0/+2
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple of warnings by explicitly adding a couple of break statements instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210305082953.GA137771@embeddedor
2020-10-30mtd: rawnand: stm32_fmc2: fix broken ECCChristophe Kerello1-7/+8
Since commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits"), ECC are broken in FMC2 driver in case of nand-ecc-step-size and nand-ecc-strength are not set in the device tree. To avoid this issue, the default settings are now set in stm32_fmc2_nfc_attach_chip function. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1604064819-26861-1-git-send-email-christophe.kerello@st.com
2020-09-30mtd: rawnand: stm32_fmc2: fix a buffer overflowChristophe Kerello1-1/+1
This patch solves following static checker warning: drivers/mtd/nand/raw/stm32_fmc2_nand.c:350 stm32_fmc2_nfc_select_chip() error: buffer overflow 'nfc->data_phys_addr' 2 <= 2 The CS value can only be 0 or 1. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1595325127-32693-1-git-send-email-christophe.kerello@st.com
2020-09-28mtd: rawnand: Use the new ECC engine type enumerationMiquel Raynal1-4/+5
Mechanical switch from the legacy "mode" enumeration to the new "engine type" enumeration in drivers and board files. The device tree parsing is also updated to return the new enumeration from the old strings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-11-miquel.raynal@bootlin.com
2020-08-07Merge tag 'nand/for-5.9' of ↵Richard Weinberger1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next Core changes: * Drop useless 'depends on' in Kconfig * Add an extra level in the Kconfig hierarchy * Trivial spellings * Dynamic allocation of the interface configurations * Dropping the default ONFI timing mode * Various cleanup (types, structures, naming, comments) * Hide the chip->data_interface indirection * Add the generic rb-gpios property * Add the ->choose_interface_config() hook * Introduce nand_choose_best_sdr_timings() * Use default values for tPROG_max and tBERS_max * Avoid redefining tR_max and tCCS_min * Add a helper to find the closest ONFI mode * bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: * fsl-upm: Deprecation of specific DT properties * fsl_upm: Driver rework and cleanup in favor of ->exec_op() * Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use * brcmnand: ECC error handling on EDU transfers * brcmnand: Don't default to EDU transfers * qcom: Set BAM mode only if not set already * qcom: Avoid write to unavailable register * gpio: Driver rework in favor of ->exec_op() * tango: ->exec_op() conversion * mtk: ->exec_op() conversion Raw NAND chip drivers changes: * toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4 * toshiba: Implement ->choose_interface_config() for TC58NVG0S3E * toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00 * hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC
2020-07-07mtd: rawnand: stm32_fmc2: get resources from parent nodeChristophe Kerello1-21/+50
FMC2 EBI support has been added. Common resources (registers base address and clock) can now be shared between the 2 drivers using "st,stm32mp1-fmc2-nfc" compatible string. It means that the common resources should now be found in the parent device when EBI node is available. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1591975362-22009-7-git-send-email-christophe.kerello@st.com
2020-07-07mtd: rawnand: stm32_fmc2: use regmap APIsChristophe Kerello1-143/+125
This patch uses regmap APIs to access all FMC2 registers. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1591975362-22009-6-git-send-email-christophe.kerello@st.com
2020-07-07mtd: rawnand: stm32_fmc2: do not display errors if the driver is deferredChristophe Kerello1-3/+3
A MDMA issue has been solved on Kernel 5.7. The effect of this fix is that the MDMA driver is now deferred and the FMC2 NFC driver is also deferred. All is working fine but there is a FMC2 log in the console: stm32_fmc2_nfc 58002000.nand-controller: failed to request tx DMA channel: -517 This patch removes the display of this log in the console in case of this error is -EPROBE_DEFER. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1591975362-22009-2-git-send-email-christophe.kerello@st.com
2020-06-26mtd: rawnand: s/data_interface/interface_config/Miquel Raynal1-2/+2
The name/suffix data_interface is a bit misleading in that the field or functions actually represent a configuration that can be applied by the controller/chip. Let's rename all fields/functions/hooks that are worth renaming. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-06-26mtd: rawnand: Hide the chip->data_interface indirectionMiquel Raynal1-1/+1
As a preparation for allocating the data interface structure dynamically (and rename it), let's avoid accessing chip->data_interface directly. Instead, we introduce a helper, nand_get_interface_config(), and use it to retrieve the current data interface configuration out of a nand_chip object. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200529111322.7184-19-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: stm32_fmc2: Stop using nand_release()Miquel Raynal1-1/+5
This helper is not very useful and very often people get confused: they use nand_release() instead of nand_cleanup(). Let's stop using nand_release() by calling mtd_device_unregister() and nand_cleanup() directly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Christophe Kerello <christophe.kerello@st.com> Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-53-miquel.raynal@bootlin.com
2020-05-24mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macrosChristophe Kerello1-92/+85
This patch removes custom macros and uses FIELD_PREP and FIELD_GET macros. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1589284068-4079-3-git-send-email-christophe.kerello@st.com
2020-05-24mtd: rawnand: stm32_fmc2: cosmetic change to use nfc instead of fmc2 where ↵Christophe Kerello1-407/+403
relevant This patch renames functions and local variables. This cleanup is done to get all functions starting by stm32_fmc2_nfc in the FMC2 raw NAND driver when all functions will start by stm32_fmc2_ebi in the FMC2 EBI driver. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1589284068-4079-2-git-send-email-christophe.kerello@st.com
2020-05-11mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_MS for timeoutsChristophe Kerello1-5/+4
This patch removes the constant FMC2_TIMEOUT_US. FMC2_TIMEOUT_MS will be used each time that we need to wait (except when the timeout value is set by the framework). It was seen, during stress tests with the sequencer in an overloaded system, that we could be close to 1 second, even if we never met this value. To be safe, FMC2_TIMEOUT_MS is set to 5 seconds. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1588756279-17289-4-git-send-email-christophe.kerello@st.com
2020-05-11mtd: rawnand: stm32_fmc2: remove useless inline commentsChristophe Kerello1-40/+0
Remove inline comments that are useless since function label are self explanatory. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1588756279-17289-3-git-send-email-christophe.kerello@st.com
2020-05-11mtd: rawnand: stm32_fmc2: manage all errors cases at probe timeChristophe Kerello1-6/+11
This patch defers its probe when the expected reset control is not yet ready. This patch also handles properly all errors cases at probe time. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1588756279-17289-2-git-send-email-christophe.kerello@st.com
2020-05-11mtd: rawnand: Rename a NAND chip optionMiquel Raynal1-1/+1
NAND controller drivers can set the NAND_USE_BOUNCE_BUFFER flag to a chip 'option' field. With this flag, the core is responsible of providing DMA-able buffers. The current behavior is to not force the use of a bounce buffer when the core thinks this is not needed. So in the end the name is a bit misleading, because in theory we will always have a DMA buffer but in practice it will not always be a bounce buffer. Rename this flag NAND_USES_DMA to be more accurate. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200507105241.14299-4-miquel.raynal@bootlin.com
2020-05-10mtd: rawnand: Take check_only into accountBoris Brezillon1-3/+3
->exec_op() is passed a check_only argument that encodes when the controller should just check whether the operation is supported or not without executing it. Some controllers simply ignore this arguments, others don't but keep modifying some of the registers before returning. Let's fix all those drivers. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200418194217.1016060-1-boris.brezillon@collabora.com
2020-03-11mtd: rawnand: stm32_fmc2: Use dma_request_chan() instead ↵Peter Ujfalusi1-7/+37
dma_request_slave_channel() dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. Use using dma_request_chan() directly and inform user of error in case the DMA request failed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200227123749.24064-8-peter.ujfalusi@ti.com
2020-01-09mtd: rawnand: stm32_fmc2: avoid to lock the CPU busChristophe Kerello1-2/+36
We are currently using nand_soft_waitrdy to poll the status of the NAND flash. FMC2 enables the wait feature bit (this feature is mandatory for the sequencer mode). By enabling this feature, we can't poll the status of the NAND flash, the read status command is stucked in FMC2 pipeline until R/B# signal is high, and locks the CPU bus. To avoid to lock the CPU bus, we poll FMC2 ISR register. This register reports the status of the R/B# signal. Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver") Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-08mtd: Remove dev_err() usage after platform_get_irq()Stephen Boyd1-4/+1
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-25mtd: rawnand: stm32_fmc2: avoid warnings when building with W=1 optionChristophe Kerello1-61/+29
This patch solves warnings detected by setting W=1 when building. Warnings type detected: drivers/mtd/nand/raw/stm32_fmc2_nand.c: In function ‘stm32_fmc2_calc_timings’: drivers/mtd/nand/raw/stm32_fmc2_nand.c:1417:23: warning: comparison is always false due to limited range of data type [-Wtype-limits] else if (tims->twait > FMC2_PMEM_PATT_TIMING_MASK) Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Cc: stable@vger.kernel.org Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-28mtd: rawnand: stm32_fmc2: increase DMA completion timeoutsAmelie Delaunay1-6/+9
When the system is overloaded, DMA data transfer completion occurs after 100ms. Increase the timeouts to let it the time to complete. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: stm32_fmc2: manage the get_irq error caseFabien Dessenne1-0/+6
During probe, check the "get_irq" error value. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: stm32_fmc2: add polling modeChristophe Kerello1-32/+297
This patch adds the polling mode, a basic mode that do not need any DMA channels. This mode is also useful for debug purpose. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driverChristophe Kerello1-0/+1808
The driver adds the support for the STMicroelectronics FMC2 NAND Controller found on STM32MP SOCs. This patch is based on FMC2 command sequencer. The purpose of the command sequencer is to facilitate the programming and the reading of NAND flash pages with the ECC and to free the CPU of sequencing tasks. It requires one DMA channel for write and two DMA channels for read operations. Only NAND_ECC_HW mode is actually supported. The driver supports a maximum 8k page size. The following ECC strength and step size are currently supported: - nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8) - nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4) - nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Extended ECC based on Hamming) This patch has been tested on Micron MT29F8G08ABACAH4 and MT29F8G16ABACAH4 Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-20 01:38:00 +0000