summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/mmci.h
AgeCommit message (Collapse)AuthorFilesLines
2020-03-24mmc: mmci_sdmmc: Implement signal voltage callbacksLudovic Barre1-0/+4
To prepare the voltage switch procedure, the VSWITCHEN bit must be set before sending the CMD11. To confirm completion of voltage switch, the VSWEND flag must be checked. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200128090636.13689-9-ludovic.barre@st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: mmci: Add callbacks for to manage signal voltage switchLudovic Barre1-0/+2
A variant may need to define some actions before and after a voltage switch. This patch adds 2 callbacks to manage signal voltage switch in the struct mmci_host_ops. ->pre_sig_volt_switch() allows to prepare a signal voltage switch before sending the SD_SWITCH_VOLTAGE command (CMD11). ->post_sig_volt_switch callback allows specific actions to be executed, after the I/O signal voltage level has been changed. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200128090636.13689-8-ludovic.barre@st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: mmci: Add private pointer for variantLudovic Barre1-0/+1
In variant init function, some references may be allocated for variant specific usage. Add a private void* to mmci_host struct allows at variant functions to access on this references by mmci_host structure. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200128090636.13689-5-ludovic.barre@st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24mmc: mmci: Add a reference at mmc_host_ops in mmci structLudovic Barre1-0/+1
The variant init function may need to add a mmc_host_ops, for example to add the execute_tuning support if this feature is available. This patch adds mmc_host_ops pointer in mmci struct. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200128090636.13689-4-ludovic.barre@st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-18mmc: mmci: Support any block sizes for ux500v2 and qcom variantLinus Walleij1-1/+7
For the ux500v2 variant of the PL18x block, any block sizes are supported. This is necessary to support some SDIO transfers. This also affects the QCOM MMCI variant and the ST micro variant. For Ux500 an additional quirk only allowing DMA on blocks that are a power of two is needed. This might be a bug in the DMA engine (DMA40) or the MMCI or in the interconnect, but the most likely is the MMCI, as transfers of these sizes work fine for other devices using the same DMA engine. DMA works fine also with SDIO as long as the blocksize is a power of 2. This patch has proven necessary for enabling SDIO for WLAN on PostmarketOS-based Ux500 platforms. What we managed to test in practice is Broadcom WiFi over SDIO on the Ux500 based Samsung GT-I8190 and GT-S7710. This WiFi chip, BCM4334 works fine after the patch. Before this patch: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4334-sdio for chip BCM4334/3 mmci-pl18x 80118000.sdi1_per2: unsupported block size (60 bytes) brcmfmac: brcmf_sdiod_ramrw: membytes transfer failed brcmfmac: brcmf_sdio_download_code_file: error -22 on writing 434236 membytes at 0x00000000 brcmfmac: brcmf_sdio_download_firmware: dongle image file download failed After this patch: brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4334/3 wl0: Nov 21 2012 00:21:28 version 6.10.58.813 (B2) FWID 01-0 Bringing up networks, discovering networks with "iw dev wlan0 scan" and connecting works fine from this point. This patch is inspired by Ulf Hansson's patch http://www.spinics.net/lists/linux-mmc/msg12160.html As the DMA engines on these platforms may now get block sizes they were not used to before, make sure to also respect if the DMA engine says "no" to a transfer. Make a drive-by fix for datactrl_blocksz, misspelled. Cc: Ludovic Barre <ludovic.barre@st.com> Cc: Brian Masney <masneyb@onstation.org> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Niklas Cassel <niklas.cassel@linaro.org> Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20191217143952.2885-1-linus.walleij@linaro.org
2019-12-18mmc: mmci: add threaded irq to abort DPSM of non-functional stateLudovic Barre1-0/+1
The stm32_sdmmc variant has build-in support for datatimeout for R1B requests. If a corresponding IRQ is raised, this triggers the DPSM to stay busy and remains in a non-functional state. Only a reset can bring it back to a functional state. Because a reset must be issued from non-atomic context, let's defer this to be managed from a threaded IRQ handler. Besides the reset, the threaded handler also calls mmc_request_done(), to finally complete the request. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20191211133934.16932-1-ludovic.Barre@st.com [Ulf: A few minor updates to the changelog/comments] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-16mmc: mmci: Convert to pinctrl_select_default_state()Ulf Hansson1-1/+0
Let's drop the boilerplate code for managing the default pinctrl state and convert into using the new pinctrl_select_default_state(). Additionally, move away from using pinctrl_pm_select_default_state() as it's scheduled for removal and use pinctrl_select_default_state() instead. Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191206170821.29711-4-ulf.hansson@linaro.org
2019-11-13mmc: mmci: sdmmc: add busy_complete callbackLudovic Barre1-0/+1
This patch adds a specific busy_complete callback for sdmmc variant. sdmmc has 2 status flags: -busyd0: This is a hardware status flag (inverted value of d0 line). it does not generate an interrupt. -busyd0end: This indicates only end of busy following a CMD response. On busy to Not busy changes, an interrupt is generated (if unmask) and BUSYD0END status flag is set. Status flag is cleared by writing corresponding interrupt clear bit in MMCICLEAR. The legacy busy completion has no dedicated interrupt for the end of busy, so it's must monitor step by step the busy progression. On sdmmc variant, this procedure is not needed, it's just need to wait the busyd0end interrupt. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: mmci: add busy_complete callbackLudovic Barre1-0/+1
This patch adds busy_completion callback at mmci_host_ops to allow to define a specific busy completion by variant. The legacy code corresponding to busy completion used by ux500 variants is moved to ux500_busy_complete function. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: mmci: add hardware busy timeout featureLudovic Barre1-0/+3
In the stm32_sdmmc variant, the datatimer is active not only during data transfers with the DPSM, but also while waiting for the busyend IRQs from commands having the MMC_RSP_BUSY flag set. This leads to an incorrect IRQ being raised to signal MCI_DATATIMEOUT error, which simply breaks the behaviour. Address this by updating the datatimer value before sending a command having the MMC_RSP_BUSY flag set. To inform the mmc core about the maximum supported busy timeout, which also depends on the current clock rate, set ->max_busy_timeout (in ms). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-15mmc: mmci: replace blksz_datactrlXX by get_datactrl_cfg callbackLudovic Barre1-7/+0
This patch allows to get datactrl configuration specific at variant. This introduce more flexibility on datactlr value. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-04-15mmc: mmci: stm32: define get_dctrl_cfgLudovic Barre1-0/+5
This patch defines get_dctrl_cfg callback for sdmmc variant. sdmmc variant has specific stm32 transfer modes. sdmmc data transfer mode selection could be: -Block data transfer ending on block count. -SDIO multibyte data transfer. -MMC Stream data transfer (not used). -Block data transfer ending with STOP_TRANSMISSION command. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-04-15mmc: mmci: add get_datactrl_cfg callback and helper functionsLudovic Barre1-0/+6
This patch adds get_datactrl_cfg callback in mmci_host_ops to allow to get datactrl configuration specific at variant. Common helper function is defined and could be call by variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-04-15mmc: mmci: Share sdmmc_variant_init() via the common header fileUlf Hansson1-0/+6
It's good practice to share functions via header files, rather than from the c-files. Therefore, let's move sdmmc_variant_init() to mmci.h. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Ludovic Barre <ludovic.barre@st.com> Tested-by: Ludovic Barre <ludovic.barre@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-15mmc: mmci: Drop qcom specific header fileUlf Hansson1-0/+6
It seems a bit silly to have a header file to share only the qcom_variant_init() function. So, let's just drop it and move the declaration of the function into the common mmci.h instead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-15mmc: mmci: Don't share un-implemented DMA functionsUlf Hansson1-0/+2
Some of the DMA functions are shared via mmci.h, however they are not implemented unless CONFIG_DMA_ENGINE is set. Therefore, add that constraint to the header file as well. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-25mmc: mmci: Send a CMD12 to clear the DPSM at errorsUlf Hansson1-0/+1
The current approach with sending a CMD12 (STOP_TRANSMISSION) to complete a data transfer request, either because of using the open-ended transmission type or because of receiving an error during a pre-defined data transfer, isn't sufficient for the STM32 sdmmc variant. More precisely, this variant needs to clear the DPSM ("Data Path State Machine") by sending a CMD12, for all failing ADTC commands. Support this, by adding a struct mmc_command inside the struct mmci_host and initialize it to a CMD12 during ->probe(). Let's also add checks for the new conditions, to enable mmci_data_irq() and mmci_cmd_irq() to postpone the calls to mmci_request_end(), but instead send the CMD12. Cc: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Barre <ludovic.barre@st.com>
2018-12-17mmc: mmci: add variant property to set command stop bitLudovic Barre1-0/+2
On cmd12 (STOP_TRANSMISSION), STM32 sdmmc variant needs to set cmdstop bit in command register. The CPSM ("Command Path State Machine") treats the command as a Stop Transmission command and signals abort to the DPSM ("Data Path State Machine"). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add stm32 sdmmc variantLudovic Barre1-0/+5
This patch adds a stm32 sdmmc variant, rev 1.1. Introduces a new Manufacturer id "0x53, ascii 'S' to define new stm32 sdmmc family with clean range of amba revision/configurations bits (corresponding to sdmmc_ver register with major/minor fields). Add 2 variants properties: -dma_lli, to enable link list support. -stm32_idmabsize_mask, defines the range of SDMMC_IDMABSIZER register which specify the number bytes per buffer. DT properties for sdmmc: -Indicate signal directions (only one property for d0dir, d123dir, cmd_dir) -Select command and data phase relation. -Select "clock in" from an external driver. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add stm32 sdmmc registersLudovic Barre1-0/+56
This patch adds stm32 sdmmc specific registers. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add clock divider for stm32 sdmmcLudovic Barre1-0/+2
The STM32 sdmmc variant has a different clock divider. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add optional reset propertyLudovic Barre1-0/+2
This patch adds a optional reset management. STM32 sdmmc variant needs to reset hardware block during the power cycle procedure (for re-initialization). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add variant property to not read datacntLudovic Barre1-0/+3
This patch adds a boolean property to not read datacnt register. Needed to support the STM32 sdmmc variant. MMCIDATACNT register should be read only after the data transfer is completed. When reading after an error event the read data count value may be different from the real number of data bytes transferred. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add variant property to write datactrl before commandLudovic Barre1-0/+2
This patch adds a boolean property to allow to write datactrl before to send command, whatever the command type (read or write). Needed to support the STM32 sdmmc variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add variant property to define irq pio maskLudovic Barre1-1/+4
This patch allows to define specific pio mask for variants. Needed to support the STM32 sdmmc variant which has some bits with different meaning (bits: 21,20,13,12,9) Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add variant property to define dpsm bitLudovic Barre1-0/+2
This patch adds datactrl variant property to define dpsm enable bit. Needed to support the STM32 variant (STM32 has no dpsm enable bit). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add variant properties to define cpsm & cmdresp bitsLudovic Barre1-0/+8
This patch adds command variant properties to define cpsm enable bit and responses. Needed to support the STM32 variant (shift of cpsm bit, specific definition of commands response). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: expand startbiterr to irqmask and error checkLudovic Barre1-3/+3
All variants don't pretend to have a startbiterr. -While data error check, if status register return an error (like MCI_DATACRCFAIL) we must avoid to check MCI_STARTBITERR (if not desired). -expand start_err to MCI_IRQENABLE to avoid to set this bit by default. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add datactrl block size variant propertyLudovic Barre1-0/+2
This patch allows to define a datactrl block size by variant, requested by STM32 sdmmc variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add set_clk/pwrreg callbacksLudovic Barre1-0/+5
This patch adds set_clkreg and set_pwrreg callbacks at mmci_host_ops to allow to call specific variant. extends visibility of mmci_write_clk/pwrreg functions to be used into specific file variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add validate_data callbackLudovic Barre1-0/+1
This patch adds validate_data callback at mmci_host_ops to check specific constraints of variant. Move mmci_validate_data function to regroup mmci_host_ops interfaces. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add dma_error callbackLudovic Barre1-0/+2
This patch adds dma_error callback at mmci_host_ops to allow to call specific variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add dma_finalize callbackLudovic Barre1-1/+2
This patch adds dma_finalize callback at mmci_host_ops to allow to call specific variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add dma_start callbackLudovic Barre1-0/+2
This patch adds dma_start callback to mmci_host_ops. Create a generic mmci_dma_start function which regroup common action between variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add get_next_data callbackLudovic Barre1-0/+2
This patch adds get_next_data callback to mmci_host_ops. Generic mmci_get_next_data factorizes next_cookie check and the host ops call. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: add prepare/unprepare_data callbacksLudovic Barre1-0/+8
This patch adds prepare/unprepare callbacks to mmci_host_ops. Like this mmci_pre/post_request can be generic, mmci_prepare_data and mmci_unprepare_data provide common next_cookie management. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: introduce dma_priv pointer to mmci_hostLudovic Barre1-15/+4
-Introduces dma_priv pointer to define specific needs for each dma engine. This patch is needed to prepare sdmmc variant with internal dma which not use dmaengine API. -Moves next cookie to mmci host structure to share same cookie management between all variants. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-09mmc: mmci: create common mmci_dma_setup/releaseLudovic Barre1-1/+6
This patch creates a common mmci_dma_setup/release which calls dma_setup/release callbacks of mmci_host_ops and manages common features like use_dma... If there is a fallbacks to pio mode, dma functions must check use_dma. error management: -mmci_dmae_setup fail if Tx and Rx dma channels are not defined -qcom_dma_setup fail if one of both dma channels is not defined, Qcom has no specific resource to release, just mmci dmae resource. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-08mmc: mmci: Change struct members from bool to u8Ludovic Barre1-16/+16
Recent versions of checkpatch have a new warning based on a documented preference of Linus to not use bool in structures due to wasted space and the size of bool is implementation dependent. For more information, see the email thread at https://lkml.org/lkml/2017/11/21/384 fix checkpatch --strict issues: -CHECK: Avoid using bool structure members because of possible alignment issues - see: https://lkml.org/lkml/2017/11/21/384 -WARNING: Avoid using bool as bitfield. Prefer bool bitfields as unsigned int or u<8|16|32> Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-08mmc: mmci: internalize dma_inprogress into mmci dma functionsLudovic Barre1-2/+0
This patch internalizes the dma_inprogress into mmci dma interfaces. This allows to simplify and prepare the next dma callbacks for mmci host ops. dma_inprogress is called in mmci_dma_data_error and mmci_dma_finalize. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-08-01mmc: mmci: Add and implement a ->dma_setup() callback for qcom dmlUlf Hansson1-0/+1
As a first step to improve the variant specific code for mmci, add a ->dma_setup() callback to the struct mmci_host_ops. To show its use, let's deploy the callback for the qcom dml, which involves also to the assign the mmci_host_ops pointer from the variant ->init() callback. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Ludovic Barre <ludovic.barre@st.com>
2018-07-30mmc: mmci: Initial support to manage variant specific callbacksUlf Hansson1-1/+79
To be able to better support different mmci variants, we need to be able to use variant specific callbacks, rather than continue to sprinkle the code with additional variant data. To move in this direction, let's add an optional ->init() callback to the variant data struct, which variants shall use to assign the mmci_host_ops pointer. Using an ->init() callback enables us to partition the code between different files. To allow separate mmci variant files to implement the variant specifics, let's also move the definition of the struct variant_data to the common mmci header file. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Ludovic Barre <ludovic.barre@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-18mmc: mmci: Add support for setting pad type via pinctrlPatrice Chotard1-0/+5
If variant hasn't the control bit to switch pads in opendrain mode, we can achieve the same result by asking to the pinmux driver to configure pins for us. This patch make the mmci driver able to do this whenever needed. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-01-18mmc: mmci: Don't pretend all variants to have MMCIMASK1 registerPatrice Chotard1-0/+1
Two mask registers are used in order to select which events have to actually generate an interrupt on each IRQ line. It seems that in the single-IRQ case it's assumed that the IRQs lines are simply OR-ed, while the two mask registers are still present. The driver still programs the two mask registers separately. However the STM32 variant has only one IRQ, and also has only one mask register. This patch prepares for STM32 variant support by making the driver using only one mask register. This patch also optimize the MMCIMASK1 mask usage by caching it into host->mask1_reg which avoid to read it into mmci_irq(). Tested only on STM32 variant. RFT for variants other than STM32 Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: core/mmci: restore pre/post_req behaviourLinus Walleij1-1/+2
commit 64b12a68a9f74bb32d8efd7af1ad8a2ba02fc884 "mmc: core: fix prepared requests while doing bkops" is fixing a bug in the wrong way. A bug in the MMCI device driver is fixed by amending the MMC core. Thinking about it: what the pre- and post-callbacks are doing is to essentially map and unmap SG lists for DMA transfers. Why would we not be able to do that just because a BKOPS command is sent inbetween? Having to unprepare/prepare the next asynchronous request for DMA seems wrong. Looking the backtrace in that commit we can see what the real problem actually is: mmci_data_irq() is calling mmci_dma_unmap() twice which is goung to call arm_dma_unmap_sg() twice and v7_dma_inv_range() twice for the same sglist and that will crash. This happens because a request is prepared, then a BKOPS is sent. The IRQ completing the BKOPS command goes through mmci_data_irq() and thinks that a DMA operation has just been completed because dma_inprogress() reports true. It then proceeds to unmap the sglist. But that was wrong! dma_inprogress() should NOT be true because no DMA was actually in progress! We had just prepared the sglist, and the DMA channel dma_current has been configured, but NOT started! Because of this, the sglist is already unmapped when we get our actual data completion IRQ, and we are unmapping the sglist once more, and we get this crash. Therefore, we need to revert this solution pushing the problem to the core and causing problems, and instead augment the implementation such that dma_inprogress() only reports true if some DMA has actually been started. After this we can keep the request prepared during the BKOPS and we need not unprepare/reprepare it. Fixes: 64b12a68a9f7 ("mmc: core: fix prepared requests while doing bkops") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29mmc: mmci: refactor ST Micro busy detectionLinus Walleij1-1/+1
The ST Micro-specific busy detection was made after the assumption that only this variant supports busy detection. So when doing busy detection, the host immediately tries to use some ST-specific register bits. Since the qualcomm variant also supports some busy detection schemes, encapsulate the variant flags better in the variant struct and prepare to add more variants by just providing some bitmasks to the logic. Put the entire busy detection logic within an if()-clause in the mmci_cmd_irq() function so the code is only executed when busy detection is enabled, and so that it is kept in (almost) one place, and add comments describing what is going on so the code can be understood. Tested on the Ux500 by introducing some prints in the busy detection path and noticing how the IRQ is enabled, used and disabled successfully. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29mmc: mmci: clean up header definesLinus Walleij1-31/+38
There was some confusion in the CPSM (Command Path State Machine) and DPSM (Data Path State Machine) regarding the naming of the registers, clarify the meaning of this acronym so the naming is understandable, and consistently use BIT() to define these fields. Consequently name the register bit defines MCI_[C|D]PSM_* and adjust the driver as well. Include new definitions for a few bits found in a patch from Srinivas Kandagatla. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: mmci: Add Qcom specific rx_fifocnt logic.Srinivas Kandagatla1-0/+1
MCIFIFOCNT register behaviour on Qcom chips is very different than the other pl180 integrations. MCIFIFOCNT register contains the number of words that are still waiting to be transferred through the FIFO. It keeps decrementing once the host CPU reads the MCIFIFO. With the existing logic and the MCIFIFOCNT behaviour, mmci_pio_read will loop forever, as the FIFOCNT register will always return transfer size before reading the FIFO. Also the data sheet states that "This register is only useful for debug purposes and should not be used for normal operation since it does not reflect data which may or may not be in the pipeline". This patch implements a qcom specific get_rx_fifocnt function which is implemented based on status register flags. Based on qcom_fifo flag in variant data structure, the corresponding get_rx_fifocnt function is selected. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: mmci: add explicit clk controlSrinivas Kandagatla1-0/+2
On Controllers like Qcom SD card controller where cclk is mclk and mclk should be directly controlled by the driver. This patch adds support to control mclk directly in the driver, and also adds explicit_mclk_control flag in variant structure giving more flexibility to the driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> [Ulf Hansson] Fixed checkpatch warning Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-29 21:46:40 +0000