| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For internal needs of our CI we need to move all the common code into a
common folder instead of putting them in the root folder of the driver.
Same applies to the common header files under include/
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
Extract detection of the cpu boot status to a function
to allow code reuse
Signed-off-by: Christine Gharzuzi <cgharzuzi@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
rephrase some error/warning/notice messages to make them more accessible to
ordinary users.
There is no need to print context ASID as the driver currently doesn't
support multiple contexts.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
|
|
Rephrase F/W error message to make it more understandable to ordinary
users.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
function header
Looks as though documentation for these function arguments have
been missing since the driver's inception last year.
Fixes the following W=1 kernel build warnings:
drivers/misc/habanalabs/firmware_if.c:26: warning: Function parameter or member 'fw_name' not described in 'hl_fw_load_fw_to_device'
drivers/misc/habanalabs/firmware_if.c:26: warning: Function parameter or member 'dst' not described in 'hl_fw_load_fw_to_device'
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instead of writing similar event handling code for each ASIC, move the code
to the common firmware file. This code will be used for GAUDI and all
future ASICs.
In addition, add two new fields to the auto-generated events file: valid
and description. This will save the need to manually write the events
description in the source code and simplify the code.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Load CPU device boot loader during driver boot time in order to avoid flash
write for every boot loader update.
To preserve backward-compatibility, skip the device boot load if the device
doesn't request it.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Move the code of device CPU initialization from being ASIC-Dependent to
common code. In addition, add support for the new error reporting feature
of the firmware boot code.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Successful device initialization is mentioned in kernel log with the
message "Successfully added device to habanalabs driver". There is no point
of spamming the log with additional messages about successful queue
testing, which are implied by the above mentioned message.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
This patch fix a bug in the host memory polling macro. The bug is that the
memory being polled can be written by the device, which always writes it
in LE. However, if the host is running Linux in BE mode, we need to
convert the value that was written by the device before matching it to the
required value that the caller has given to the macro.
Signed-off-by: Ben Segal <bpsegal20@gmail.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
writeX macros might perform byte-swapping in BE architectures. As our F/W
is in LE format, we need to make sure no byte-swapping will occur.
There is a standard kernel function (called memcpy_toio) for copying data
to I/O area which is used in a lot of drivers to download F/W to PCIe
adapters. That function also makes sure the data is copied "as-is",
without byte-swapping.
This patch use that function to copy the F/W to the GOYA ASIC instead of
writeX macros.
Signed-off-by: Ben Segal <bpsegal20@gmail.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This patch removes a limitation on the maximum packet size that is read by
the device CPU as that limitation is not needed.
Therefore, the patch also removes an elaborate calculation that is based
on this limitation which is also not needed now. Instead, use a fixed
value for the memory pool size of the packets.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This patch changes two polling functions to macros, in order to make their
API the same as the standard readl_poll_timeout so we would be able to
define the "condition for exit" when calling these macros.
This will simplify the code as it will eliminate the need to check both
for timeout and for the (cond) in the calling function.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This patch fixes comments on various structure members and some spelling
errors in log messages.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This patch improves the error message that is shown when a new user tries
to open a new FD while there is already an existing user that is working
on the device.
It also improves the error message in case of missing firmware file.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Routing device accesses to the host memory requires the usage of a base
offset, which is canceled by the iATU just before leaving the device.
The value of the base offset might be distinctive between different ASIC
types.
The manipulation of the addresses is currently used throughout the
driver code, and one should be aware to it whenever providing a host
memory address to the device.
This patch removes this manipulation from the driver common code, and
moves it to the ASIC specific functions that are responsible for
host memory allocation/mapping.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This patch moves the code that is responsible of the communication
vs. the F/W to a dedicated file. This will allow us to share the code
between different ASICs.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
