summaryrefslogtreecommitdiffstats
path: root/drivers/media/test-drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-12-13Merge tag 'media/v6.2-1' of ↵Linus Torvalds26-22/+3687
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - DVB core changes to avoid refcount troubles and UAF - DVB API/core has gained support for DVB-C2 and DVB-S2X - New sensor drivers: ov08x40, ov4689.c, st-vgxy61 and tc358746.c - Removal of an unused sensor driver: s5k4ecgx - Move microchip_csi2dc to a new directory, named after the manufacturer - Add media controller support to Microship drivers - Old Atmel/Microship drivers that don't use media controler got moved to staging - New drivers added for Renesas RZ/G2L CRU and MIPI CSI-2 support - Allwinner A31 camera sensor driver code was now split into a bridge and a separate processor driver - Added a virtual stateless decoder driver in order to test core support for stateless drivers and test userspace apps using it - removed platform-based support for ov9650, as this is not used anymore - atomisp now uses videobuf2 and supports normal mmap mode - the imx7-media-csi driver got promoted from staging - rcar-vin driver has gained support for gen3 UDS (Up Down Scaler) - most i2c drivers now use I2C .probe_new() kAPI - lots of drivers fixes, cleanups and improvements * tag 'media/v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (544 commits) media: s5c73m3: Switch to GPIO descriptors media: i2c: s5k5baf: switch to using gpiod API media: i2c: s5k6a3: switch to using gpiod API media: imx: remove code for non-existing config IMX_GPT_ICAP media: si470x: Fix use-after-free in si470x_int_in_callback() media: staging: stkwebcam: Restore MEDIA_{USB,CAMERA}_SUPPORT dependencies media: coda: Add check for kmalloc media: coda: Add check for dcoda_iram_alloc dt-bindings: media: s5c73m3: Fix reset-gpio descriptor media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property media: s5k4ecgx: Delete driver media: s5k4ecgx: Switch to GPIO descriptors media: Switch to use dev_err_probe() helper headers: Remove some left-over license text in include/uapi/linux/v4l2-* headers: Remove some left-over license text in include/uapi/linux/dvb/ media: usb: pwc-uncompress: Use flex array destination for memcpy() media: s5p-mfc: Fix to handle reference queue during finishing media: s5p-mfc: Clear workbit to handle error condition media: s5p-mfc: Fix in register read and write for H264 media: imx: Use get_mbus_config instead of parsing upstream DT endpoints ...
2022-11-25Merge tag 'br-v6.2g' of git://linuxtv.org/hverkuil/media_tree into media_stageMauro Carvalho Chehab2-6/+4
Despite being big, the changes here are trivial: they just change the probing method for I2C. So, apply it as a merge. Tag branch * tag 'br-v6.2g' of git://linuxtv.org/hverkuil/media_tree: (96 commits) media: v4l2-core/tuner-core: Convert to i2c's .probe_new() media: usb: go7007: s2250-board: Convert to i2c's .probe_new() media: tuners/tua9001: Convert to i2c's .probe_new() media: tuners/tda18250: Convert to i2c's .probe_new() media: tuners/tda18212: Convert to i2c's .probe_new() media: tuners/qm1d1c0042: Convert to i2c's .probe_new() media: tuners/qm1d1b0004: Convert to i2c's .probe_new() media: tuners/mxl301rf: Convert to i2c's .probe_new() media: tuners/mt2060: Convert to i2c's .probe_new() media: tuners/m88rs6000t: Convert to i2c's .probe_new() media: tuners/fc2580: Convert to i2c's .probe_new() media: tuners/e4000: Convert to i2c's .probe_new() media: vidtv: Convert to i2c's .probe_new() media: radio/tef6862: Convert to i2c's .probe_new() media: radio/saa7706h: Convert to i2c's .probe_new() media: radio/radio-tea5764: Convert to i2c's .probe_new() media: i2c/wm8775: Convert to i2c's .probe_new() media: i2c/wm8739: Convert to i2c's .probe_new() media: i2c/vs6624: Convert to i2c's .probe_new() media: i2c/vpx3220: Convert to i2c's .probe_new() ... Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-25media: vidtv: Fix use-after-free in vidtv_bridge_dvb_init()Chen Zhongjin1-14/+8
KASAN reports a use-after-free: BUG: KASAN: use-after-free in dvb_dmxdev_release+0x4d5/0x5d0 [dvb_core] Call Trace: ... dvb_dmxdev_release+0x4d5/0x5d0 [dvb_core] vidtv_bridge_probe+0x7bf/0xa40 [dvb_vidtv_bridge] platform_probe+0xb6/0x170 ... Allocated by task 1238: ... dvb_register_device+0x1a7/0xa70 [dvb_core] dvb_dmxdev_init+0x2af/0x4a0 [dvb_core] vidtv_bridge_probe+0x766/0xa40 [dvb_vidtv_bridge] ... Freed by task 1238: dvb_register_device+0x6d2/0xa70 [dvb_core] dvb_dmxdev_init+0x2af/0x4a0 [dvb_core] vidtv_bridge_probe+0x766/0xa40 [dvb_vidtv_bridge] ... It is because the error handling in vidtv_bridge_dvb_init() is wrong. First, vidtv_bridge_dmx(dev)_init() will clean themselves when fail, but goto fail_dmx(_dev): calls release functions again, which causes use-after-free. Also, in fail_fe, fail_tuner_probe and fail_demod_probe, j = i will cause out-of-bound when i finished its loop (i == NUM_FE). And the loop releasing is wrong, although now NUM_FE is 1 so it won't cause problem. Fix this by correctly releasing everything. Fixes: f90cf6079bf6 ("media: vidtv: add a bridge driver") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-25media: visl: add virtual stateless decoder driverDaniel Almeida19-0/+3645
A virtual stateless device for stateless uAPI development purposes. This tool's objective is to help the development and testing of userspace applications that use the V4L2 stateless API to decode media. A userspace implementation can use visl to run a decoding loop even when no hardware is available or when the kernel uAPI for the codec has not been upstreamed yet. This can reveal bugs at an early stage. This driver can also trace the contents of the V4L2 controls submitted to it. It can also dump the contents of the vb2 buffers through a debugfs interface. This is in many ways similar to the tracing infrastructure available for other popular encode/decode APIs out there and can help develop a userspace application by using another (working) one as a reference. Note that no actual decoding of video frames is performed by visl. The V4L2 test pattern generator is used to write various debug information to the capture buffers instead. Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-25media: vimc: Fix wrong function called when vimc_init() failsChen Zhongjin1-1/+1
In vimc_init(), when platform_driver_register(&vimc_pdrv) fails, platform_driver_unregister(&vimc_pdrv) is wrongly called rather than platform_device_unregister(&vimc_pdev), which causes kernel warning: Unexpected driver unregister! WARNING: CPU: 1 PID: 14517 at drivers/base/driver.c:270 driver_unregister+0x8f/0xb0 RIP: 0010:driver_unregister+0x8f/0xb0 Call Trace: <TASK> vimc_init+0x7d/0x1000 [vimc] do_one_initcall+0xd0/0x4e0 do_init_module+0x1cf/0x6b0 load_module+0x65c2/0x7820 Fixes: 4a29b7090749 ("[media] vimc: Subdevices as modules") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-21media: vidtv: Convert to i2c's .probe_new()Uwe Kleine-König2-6/+4
The probe functions doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-11-18treewide: use get_random_u32_below() instead of deprecated functionJason A. Donenfeld6-10/+10
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-15Merge tag 'br-v6.2d' of git://linuxtv.org/hverkuil/media_tree into media_stageMauro Carvalho Chehab2-1/+28
Tag branch * tag 'br-v6.2d' of git://linuxtv.org/hverkuil/media_tree: (35 commits) media: saa7164: remove variable cnt atomisp: fix potential NULL pointer dereferences radio-terratec: Remove variable p media: platform: s5p-mfc: Fix spelling mistake "mmaping" -> "mmapping" media: platform: mtk-mdp3: remove unused VIDEO_MEDIATEK_VPU config media: vivid: remove redundant assignment to variable checksum media: cedrus: h264: Optimize mv col buffer allocation media: cedrus: h265: Associate mv col buffers with buffer media: mediatek: vcodec: fix h264 cavlc bitstream fail media: cedrus: hevc: Fix offset adjustments media: imx-jpeg: Fix Coverity issue in probe media: v4l2-ioctl.c: Unify YCbCr/YUV terms in format descriptions media: atomisp: Fix spelling mistake "mis-match" -> "mismatch" media: c8sectpfe: Add missed header(s) media: adv748x: afe: Select input port when initializing AFE media: vimc: Update device configuration in the documentation media: adv748x: Remove dead function declaration media: mxl5005s: Make array RegAddr static const media: atomisp: Fix spelling mistake "modee" -> "mode" media: meson/vdec: always init coef_node_start ...
2022-11-04media: vivid: fix compose size exceed boundaryLiu Shixin1-0/+1
syzkaller found a bug: BUG: unable to handle page fault for address: ffffc9000a3b1000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 100000067 P4D 100000067 PUD 10015f067 PMD 1121ca067 PTE 0 Oops: 0002 [#1] PREEMPT SMP CPU: 0 PID: 23489 Comm: vivid-000-vid-c Not tainted 6.1.0-rc1+ #512 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:memcpy_erms+0x6/0x10 [...] Call Trace: <TASK> ? tpg_fill_plane_buffer+0x856/0x15b0 vivid_fillbuff+0x8ac/0x1110 vivid_thread_vid_cap_tick+0x361/0xc90 vivid_thread_vid_cap+0x21a/0x3a0 kthread+0x143/0x180 ret_from_fork+0x1f/0x30 </TASK> This is because we forget to check boundary after adjust compose->height int V4L2_SEL_TGT_CROP case. Add v4l2_rect_map_inside() to fix this problem for this case. Fixes: ef834f7836ec ("[media] vivid: add the video capture and output parts") Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-25media: vivid: set num_in/outputs to 0 if not supportedHans Verkuil1-4/+12
If node_types does not have video/vbi/meta inputs or outputs, then set num_inputs/num_outputs to 0 instead of 1. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 0c90f649d2f5 (media: vivid: add vivid_create_queue() helper) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: vivid: drop GFP_DMA32Hans Verkuil1-1/+1
>From what I can see, this is not needed. And since using it issues a 'deprecated' warning, just drop it. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: vivid: fix control handler mutex deadlockHans Verkuil1-0/+8
vivid_update_format_cap() can be called from an s_ctrl callback. In that case (keep_controls == true) no control framework functions can be called that take the control handler mutex. The new call to v4l2_ctrl_modify_dimensions() did exactly that. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 6bc7643d1b9c (media: vivid: add pixel_array test control) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: vivid: dev->bitmap_cap wasn't freed in all casesHans Verkuil1-5/+13
Whenever the compose width/height values change, the dev->bitmap_cap vmalloc'ed array must be freed and dev->bitmap_cap set to NULL. This was done in some places, but not all. This is only an issue if overlay support is enabled and the bitmap clipping is used. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: vivid: s_fbuf: add more sanity checksHans Verkuil3-1/+32
VIDIOC_S_FBUF is by definition a scary ioctl, which is why only root can use it. But at least check if the framebuffer parameters match that of one of the framebuffer created by vivid, and reject anything else. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-24media: vivid: remove redundant assignment to variable checksumColin Ian King1-1/+0
Variable checksum is assigned a value that is never read, it is assigned a new value in a following for-loop. The assignment is redundant and can be removed. Cleans up clang scan build warning: drivers/media/test-drivers/vivid/vivid-vbi-gen.c:197:2: warning: Value stored to 'checksum' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24vivid: add INTEGER and INTEGER64 test control arraysHans Verkuil1-0/+28
Add INTEGER and INTEGER64 control arrays to test support for such controls. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-22Merge tag 'media/v6.1-2' of ↵Linus Torvalds1-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull missed media updates from Mauro Carvalho Chehab: "It seems I screwed-up my previous pull request: it ends up that only half of the media patches that were in linux-next got merged in -rc1. The script which creates the signed tags silently failed due to 5.19->6.0 so it ended generating a tag with incomplete stuff. So here are the missing parts: - a DVB core security fix - lots of fixes and cleanups for atomisp staging driver - old drivers that are VB1 are being moved to staging to be deprecated - several driver updates - mostly for embedded systems, but there are also some things addressing issues with some PC webcams, in the UVC video driver" * tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits) media: sun6i-csi: Move csi buffer definition to main header file media: sun6i-csi: Introduce and use video helper functions media: sun6i-csi: Add media ops with link notify callback media: sun6i-csi: Remove controls handler from the driver media: sun6i-csi: Register the media device after creation media: sun6i-csi: Pass and store csi device directly in video code media: sun6i-csi: Tidy up video code media: sun6i-csi: Tidy up v4l2 code media: sun6i-csi: Tidy up Kconfig media: sun6i-csi: Use runtime pm for clocks and reset media: sun6i-csi: Define and use variant to get module clock rate media: sun6i-csi: Always set exclusive module clock rate media: sun6i-csi: Tidy up platform code media: sun6i-csi: Refactor main driver data structures media: sun6i-csi: Define and use driver name and (reworked) description media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER ...
2022-10-11treewide: use get_random_u32() when possibleJason A. Donenfeld1-2/+2
The prandom_u32() function has been a deprecated inline wrapper around get_random_u32() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. The same also applies to get_random_int(), which is just a wrapper around get_random_u32(). This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Acked-by: Helge Deller <deller@gmx.de> # for parisc Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use get_random_{u8,u16}() when possible, part 1Jason A. Donenfeld1-2/+2
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done mechanically with this coccinelle script: @@ expression E; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; typedef __be16; typedef __le16; typedef u8; @@ ( - (get_random_u32() & 0xffff) + get_random_u16() | - (get_random_u32() & 0xff) + get_random_u8() | - (get_random_u32() % 65536) + get_random_u16() | - (get_random_u32() % 256) + get_random_u8() | - (get_random_u32() >> 16) + get_random_u16() | - (get_random_u32() >> 24) + get_random_u8() | - (u16)get_random_u32() + get_random_u16() | - (u8)get_random_u32() + get_random_u8() | - (__be16)get_random_u32() + (__be16)get_random_u16() | - (__le16)get_random_u32() + (__le16)get_random_u16() | - prandom_u32_max(65536) + get_random_u16() | - prandom_u32_max(256) + get_random_u8() | - E->inet_id = get_random_u32() + E->inet_id = get_random_u16() ) @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; identifier v; @@ - u16 v = get_random_u32(); + u16 v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; identifier v; @@ - u8 v = get_random_u32(); + u8 v = get_random_u8(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; u16 v; @@ - v = get_random_u32(); + v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; u8 v; @@ - v = get_random_u32(); + v = get_random_u8(); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Examine limits @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value < 256: coccinelle.RESULT = cocci.make_ident("get_random_u8") elif value < 65536: coccinelle.RESULT = cocci.make_ident("get_random_u16") else: print("Skipping large mask of %s" % (literal)) cocci.include_match(False) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; identifier add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + (RESULT() & LITERAL) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld1-1/+1
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-07Merge tag 'media/v6.1-1' of ↵Linus Torvalds4-2/+23
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New driver for Mediatek MDP V3 - New driver for NXP i.MX DW100 dewarper - Zoran driver got promoted from staging - Hantro and related drivers got promoted from staging - Several VB1 drivers got moved to staging/deprecated (cpia2, fsl-viu, meye, saa7146, av7110, stkwebcam, tm6000, vpfe_capture, davinci, zr364xx) - Usual set of driver fixes, improvements and cleanups * tag 'media/v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (107 commits) media: destage Hantro VPU driver media: platform: mtk-mdp3: add MediaTek MDP3 driver media: dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA media: dt-binding: mediatek: add bindings for MediaTek MDP3 components media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init media: xilinx: video: Add 1X12 greyscale format media: xilinx: csi2rxss: Add 1X12 greyscale format media: staging: media: imx: imx7-media-csi: Increase video mem limit media: uvcvideo: Limit power line control for Sonix Technology media: uvcvideo: Use entity get_cur in uvc_ctrl_set media: uvcvideo: Fix typo 'the the' in comment media: uvcvideo: Use indexed loops in uvc_ctrl_init_ctrl() media: uvcvideo: Fix memory leak in uvc_gpio_parse media: renesas: vsp1: Add support for RZ/G2L VSPD media: renesas: vsp1: Add VSP1_HAS_NON_ZERO_LBA feature bit media: renesas: vsp1: Add support for VSP software version media: renesas: vsp1: Add support to deassert/assert reset line media: dt-bindings: media: renesas,vsp1: Document RZ/G2L VSPD bindings media: meson: vdec: add missing clk_disable_unprepare on error in vdec_hevc_start() media: amphion: fix a bug that vpu core may not resume after suspend ...
2022-09-24media: drivers: use video device pipeline start/stopTomi Valkeinen1-4/+3
Convert the media drivers to use video device based pipeline start/stop where possible. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-29media: avoid use of 'videobuf'Hans Verkuil1-1/+1
The term 'videobuf' typically refers to the old videobuf version 1 framework. Avoid using this word in drivers that are converted to vb2. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-19media: vivid: add pixel_array test controlHans Verkuil3-1/+22
This control will change dimensions according to the source resolution. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-08-16i2c: Make remove callback return voidUwe Kleine-König2-6/+2
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-27media: vimc: wrong pointer is used with PTR_ERRHans Verkuil1-1/+1
Fix smatch warning: drivers/media/test-drivers/vimc/vimc-core.c:214 vimc_create_links() warn: passing a valid pointer to 'PTR_ERR' Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-17media: mc-entity: Rename media_entity_remote_pad() to ↵Laurent Pinchart1-1/+1
media_pad_remote_pad_first() The media_entity_remote_pad() is misnamed, as it operates on a pad and not an entity. Rename it to media_pad_remote_pad_first() to clarify its behaviour. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-17media: vicodec: Use vb2_find_bufferEzequiel Garcia1-6/+2
Use the newly introduced vb2_find_buffer API to get a vb2_buffer given a buffer timestamp. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-15media: vivid: add dynamic array test controlHans Verkuil1-0/+15
Add a dynamic array test control to help test support for this feature. Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-15media: vivid: Add support for the new YUVA and YUVX formatsLaurent Pinchart1-0/+15
Extend vivid to support the newly added YUVA and YUVX pixel formats through the TPG. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-15media: vimc: use data link entities enum to index the ent_config arrayDaniel Oakley1-11/+11
Future additions to the ent_config[] could break the association between the index of the struct vimc_ent_config entries in the ent_config[] array, and the index defined by the enum proposed in the previous patch. Using designated initializers solves this by linking the 2 together clearly in code and prevents the array not reflecting the enum. There is no functional change intended. Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Daniel Oakley <daniel.oakley@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-15media: vimc: enumerate data link entities for clarityDaniel Oakley1-8/+28
The data_links array was hard to read and understand. By implementing enumerated vimc data link entities, clarity has been improved when defining data_links. This therefore should help new programmers to understand the codebase better. There is no functional change intended. Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Daniel Oakley <daniel.oakley@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-15media: vimc: expand the names of vimc entity typesDaniel Oakley7-648/+652
When introducing the lens controller, it became apparent that the vimc entity type names were hard to understand, e.g. vimc_len_type refers to the lens. The names of the vimc entity types have been expanded to make the code easier to understand. There is no functional change intended. Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Daniel Oakley <daniel.oakley@ideasonboard.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-15media: vimc: add ancillary lensYunke Cao4-21/+170
Add lens to vimc driver and link them with sensors using ancillary links. Provides an example of ancillary link usage.The lens supports FOCUS_ABSOLUTE control. Test example: With default vimc topology > media-ctl -p Media controller API version 5.18.0 ... - entity 28: Lens A (0 pad, 0 link) type V4L2 subdev subtype Lens flags 0 device node name /dev/v4l-subdev6 - entity 29: Lens B (0 pad, 0 link) type V4L2 subdev subtype Lens flags 0 device node name /dev/v4l-subdev7 > v4l2-ctl -d /dev/v4l-subdev7 -C focus_absolute focus_absolute: 0 Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Yunke Cao <yunkec@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: vivid: add HDMI Video Guard Band controlHans Verkuil1-0/+14
Add a vivid control to insert the HDMI Video Guard Band in the image. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-03-18media: vidtv: use vfree() for memory allocated with vzalloc()Yihao Han1-1/+1
It is allocated with vzalloc(), the corresponding release function should not be kfree(), use vfree() instead. Generated by: scripts/coccinelle/api/kfree_mismatch.cocci Signed-off-by: Yihao Han <hanyihao@vivo.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-03-18media: media/*/Kconfig: sort entriesMauro Carvalho Chehab2-5/+2
Currently, the idems inside media Kconfig are out of order. Sort them using the script below: <script> use strict; use warnings; my %config; my @source; my $out; sub flush_config() { if (scalar %config) { for my $c (sort keys %config) { $out .= $config{$c} . "\n"; } %config = (); } return if (!scalar @source); $out .= "\n"; for my $s (sort @source) { $out .= $s; } $out .= "\n"; @source = (); } sub sort_kconfig($) { my $fname = shift; my $cur_config = ""; @source = (); $out = ""; %config = (); open IN, $fname or die; while (<IN>) { if (m/^config\s+(.*)/) { $cur_config = $1; $config{$cur_config} .= $_; } elsif (m/^source\s+(.*)/) { push @source, $_; } elsif (m/^\s+/) { if ($cur_config eq "") { $out .= $_; } else { $config{$cur_config} .= $_; } } else { flush_config(); $cur_config = ""; $out .= $_; } } close IN or die; flush_config(); $out =~ s/\n\n+/\n\n/g; $out =~ s/\n+$/\n/; open OUT, ">$fname"; print OUT $out; close OUT; } for my $fname(@ARGV) { sort_kconfig $fname } </script> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-03-18media: Kconfig: cleanup VIDEO_DEV dependenciesMauro Carvalho Chehab4-4/+4
media Kconfig has two entries associated to V4L API: VIDEO_DEV and VIDEO_V4L2. On Kernel 2.6.x, there were two V4L APIs, each one with its own flag. VIDEO_DEV were meant to: 1) enable Video4Linux and make its Kconfig options to appear; 2) it makes the Kernel build the V4L core. while VIDEO_V4L2 where used to distinguish between drivers that implement the newer API and drivers that implemented the former one. With time, such meaning changed, specially after the removal of all V4L version 1 drivers. At the current implementation, VIDEO_DEV only does (1): it enables the media options related to V4L, that now has: menu "Video4Linux options" visible if VIDEO_DEV source "drivers/media/v4l2-core/Kconfig" endmenu but it doesn't affect anymore the V4L core drivers. The rationale is that the V4L2 core has a "soft" dependency at the I2C bus, and now requires to select a number of other Kconfig options: config VIDEO_V4L2 tristate depends on (I2C || I2C=n) && VIDEO_DEV select RATIONAL select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE default (I2C || I2C=n) && VIDEO_DEV In the past, merging them would be tricky, but it seems that it is now possible to merge those symbols, in order to simplify V4L dependencies. Let's keep VIDEO_DEV, as this one is used on some make *defconfig configurations. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for meson-vdec & meson-ge2d Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-03-14media: Makefiles: sort entries where it fitsMauro Carvalho Chehab1-3/+7
Alphabetically sort entries at the Makefiles per group, in ASCII order, e. g., using the output of: $ LC_ALL=C sort Makefile |grep obj-y ... $ LC_ALL=C sort Makefile |grep obj.*CONFIG ... Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-03-12media: Makefiles: remove extra spacesMauro Carvalho Chehab1-5/+5
It is hard to keep all those options aligned as newer config changes get added, and we really don't want to have patches adding new options also touching already existing entries. So, drop the extra spaces. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-03-07Merge tag 'br-v5.18l' of git://linuxtv.org/hverkuil/media_tree into media_stageMauro Carvalho Chehab4-4/+8
Tag branch * tag 'br-v5.18l' of git://linuxtv.org/hverkuil/media_tree: (39 commits) media: imx-jpeg: Set V4L2_BUF_FLAG_LAST at eos media: meson-ir-tx: remove incorrect doc comment media: vivid: use time_is_after_jiffies() instead of open coding it media: wl128x: use time_is_before_jiffies() instead of open coding it media: tda8083: use time_is_after_jiffies() instead of open coding it media: stv0299: use time_is_before_jiffies() instead of open coding it media: si21xx: use time_is_before_jiffies() instead of open coding it media: cedrus: h264: Fix neighbour info buffer size media: cx88-mpeg: clear interrupt status register before streaming video media: cedrus: H265: Fix neighbour info buffer size media: fsl-viu: use GFP_KERNEL media: cx18: use GFP_KERNEL drivers: meson: vdec: add VP9 support to GXM stkwebcam: add new Asus laptop to upside_down table media: imx-jpeg: fix a bug of accessing array out of bounds media: sun6i-csi: fix colorspace in sun6i_video_try_fmt() media: usb: go7007: s2250-board: fix leak in probe() media: cedrus: Add watchdog for job completion pixfmt-yuv-planar.rst: fix typo: 'Cr, Cr' -> 'Cr, Cb' media: imx-jpeg: Remove unnecessary print function dev_err() ... Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-03-07media: vidtv: Check for null return of vzallocJiasheng Jiang1-4/+13
As the possible failure of the vzalloc(), e->encoder_buf might be NULL. Therefore, it should be better to check it in order to guarantee the success of the initialization. If fails, we need to free not only 'e' but also 'e->name'. Also, if the allocation for ctx fails, we need to free 'e->encoder_buf' else. Fixes: f90cf6079bf6 ("media: vidtv: add a bridge driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-02-22media: vivid: use time_is_after_jiffies() instead of open coding itWang Qing4-4/+8
Use the helper function time_is_{before,after}_jiffies() to improve code readability. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-02-16media: vimc: Add support for contiguous DMA buffersLaurent Pinchart4-2/+25
The vimc driver is used for testing purpose, and some test use cases involve sharing buffers with a consumer device. Consumers often require DMA contiguous memory, which vimc doesn't currently support. This leads in the best case to usage of bounce buffers, which is very slow, and in the worst case in a complete failure. Add support for the dma-contig allocator in vimc to support those use cases properly. The allocator is selected through a new "allocator" module parameter, which defaults to vmalloc. [hverkuil: add missing 'select VIDEOBUF2_DMA_CONFIG' to Kconfig] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-23media: vivid: fix timestamp and sequence wrappingDeborah Brouwer7-30/+44
The error injection controls that test wrap-around sequence and timestamp counters were partially broken. Add a menu option for 64 or 32 bit signed timestamp wrapping. Prevent the timestamp from wrapping around before the device can be tested. Remove the sequence count from the timestamp calculation so that sequence wrapping does not interfere with the timestamp. Add consistent time and sequence wrapping to sdr and touch devices. Signed-off-by: Deborah Brouwer <deborahbrouwer3563@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2021-12-14media: vidtv: remove unneeded variable make code cleanerMinghao Chi1-9/+3
return value form directly instead of taking this in another redundant variable. Link: https://lore.kernel.org/linux-media/20211210024721.425145-1-chi.minghao@zte.com.cn Reported-by: Zeal Robot <zealci@zte.com.cm> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-07media: replace setting of bytesused with vb2_set_plane_payloadDafna Hirschfeld1-1/+1
In many places the bytesused field of struct vb2_buffer is set directly. Replace that with the function call vb2_set_plane_payload Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-19media: vidtv: move kfree(dvb) to vidtv_bridge_dev_release()Hans Verkuil1-1/+4
Adding kfree(dvb) to vidtv_bridge_remove() will remove the memory too soon: if an application still has an open filehandle to the device when the driver is unloaded, then when that filehandle is closed, a use-after-free access takes place to the freed memory. Move the kfree(dvb) to vidtv_bridge_dev_release() instead. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 76e21bb8be4f ("media: vidtv: Fix memory leak in remove") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-05media: vivid: fix an error code in vivid_create_instance()Dan Carpenter1-1/+1
Preserve the error code stored in "dev->kthread_cec" before setting it to NULL. Fixes: 439e520995ab ("media: vivid: add signal-free time for cec message xfer") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30media: vimc: Enable set resolution at the scaler src padPedro Terra1-222/+144
Modify the scaler subdevice to accept setting the resolution of the source pad (previously the source resolution would always be 3 times the sink for both dimensions). Now any resolution can be set at src (even smaller ones) and the sink video will be scaled to match it. Test example: With the vimc module up (using the default vimc topology) media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]' media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]' media-ctl -d platform:vimc -V '"Scaler":0[fmt:RGB888_1X24/640x480]' media-ctl -d platform:vimc -V '"Scaler":0[crop:(100,50)/400x150]' media-ctl -d platform:vimc -V '"Scaler":1[fmt:RGB888_1X24/300x700]' v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=300,height=700 v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81 v4l2-ctl --stream-mmap --stream-count=10 -z platform:vimc -d "RGB/YUV Capture" \ --stream-to=test.raw The result will be a cropped stream that can be checked with the command ffplay -loglevel warning -v info -f rawvideo -pixel_format rgb24 \ -video_size "300x700" test.raw Co-developed-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com> Signed-off-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com> Co-developed-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com> Signed-off-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com> Signed-off-by: Pedro Terra <pedro@terraco.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-26 06:06:18 +0000