summaryrefslogtreecommitdiffstats
path: root/drivers/media/rc
AgeCommit message (Collapse)AuthorFilesLines
2022-12-16Merge tag 'driver-core-6.2-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core and kernfs changes for 6.2-rc1. The "big" change in here is the addition of a new macro, container_of_const() that will preserve the "const-ness" of a pointer passed into it. The "problem" of the current container_of() macro is that if you pass in a "const *", out of it can comes a non-const pointer unless you specifically ask for it. For many usages, we want to preserve the "const" attribute by using the same call. For a specific example, this series changes the kobj_to_dev() macro to use it, allowing it to be used no matter what the const value is. This prevents every subsystem from having to declare 2 different individual macros (i.e. kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce the const value at build time, which having 2 macros would not do either. The driver for all of this have been discussions with the Rust kernel developers as to how to properly mark driver core, and kobject, objects as being "non-mutable". The changes to the kobject and driver core in this pull request are the result of that, as there are lots of paths where kobjects and device pointers are not modified at all, so marking them as "const" allows the compiler to enforce this. So, a nice side affect of the Rust development effort has been already to clean up the driver core code to be more obvious about object rules. All of this has been bike-shedded in quite a lot of detail on lkml with different names and implementations resulting in the tiny version we have in here, much better than my original proposal. Lots of subsystem maintainers have acked the changes as well. Other than this change, included in here are smaller stuff like: - kernfs fixes and updates to handle lock contention better - vmlinux.lds.h fixes and updates - sysfs and debugfs documentation updates - device property updates All of these have been in the linux-next tree for quite a while with no problems" * tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits) device property: Fix documentation for fwnode_get_next_parent() firmware_loader: fix up to_fw_sysfs() to preserve const usb.h: take advantage of container_of_const() device.h: move kobj_to_dev() to use container_of_const() container_of: add container_of_const() that preserves const-ness of the pointer driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion. driver core: fix up missed scsi/cxlflash class.devnode() conversion. driver core: fix up some missing class.devnode() conversions. driver core: make struct class.devnode() take a const * driver core: make struct class.dev_uevent() take a const * cacheinfo: Remove of_node_put() for fw_token device property: Add a blank line in Kconfig of tests device property: Rename goto label to be more precise device property: Move PROPERTY_ENTRY_BOOL() a bit down device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*() kernfs: fix all kernel-doc warnings and multiple typos driver core: pass a const * into of_device_uevent() kobject: kset_uevent_ops: make name() callback take a const * kobject: kset_uevent_ops: make filter() callback take a const * kobject: make kobject_namespace take a const * ...
2022-12-07media: Switch to use dev_err_probe() helperYang Yingliang3-20/+8
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER. Reviewed-by: Sean Young <sean@mess.org> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-11-25media: imon: fix a race condition in send_packet()Gautam Menghani1-3/+3
The function send_packet() has a race condition as follows: func send_packet() { // do work call usb_submit_urb() mutex_unlock() wait_for_event_interruptible() <-- lock gone mutex_lock() } func vfd_write() { mutex_lock() call send_packet() <- prev call is not completed mutex_unlock() } When the mutex is unlocked and the function send_packet() waits for the call to complete, vfd_write() can start another call, which leads to the "URB submitted while active" warning in usb_submit_urb(). Fix this by removing the mutex_unlock() call in send_packet() and using mutex_lock_interruptible(). Link: https://syzkaller.appspot.com/bug?id=e378e6a51fbe6c5cc43e34f131cc9a315ef0337e Fixes: 21677cfc562a ("V4L/DVB: ir-core: add imon driver") Reported-by: syzbot+0c3cb6dc05fbbdc3ad66@syzkaller.appspotmail.com Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-25media: ir-spi: silence no spi_device_id warningsWei Yongjun1-0/+7
SPI devices use the spi_device_id for module autoloading even on systems using device tree, after commit 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible"), kernel warns as follows since the spi_device_id is missing: SPI driver ir-spi has no spi_device_id for ir-spi-led Add spi_device_id entries to silence the warning, and ensure driver module autoloading works. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-24driver core: make struct class.devnode() take a const *Greg Kroah-Hartman1-1/+1
The devnode() in struct class should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Jens Axboe <axboe@kernel.dk> Cc: Justin Sanders <justin@coraid.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Benjamin Gaignard <benjamin.gaignard@collabora.com> Cc: Liam Mark <lmark@codeaurora.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Brian Starkey <Brian.Starkey@arm.com> Cc: John Stultz <jstultz@google.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Leon Romanovsky <leon@kernel.org> Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Sean Young <sean@mess.org> Cc: Frank Haverkamp <haver@linux.ibm.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Xie Yongji <xieyongji@bytedance.com> Cc: Gautam Dawar <gautam.dawar@xilinx.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Maxime Coquelin <maxime.coquelin@redhat.com> Cc: alsa-devel@alsa-project.org Cc: dri-devel@lists.freedesktop.org Cc: kvm@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: linux-block@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: linux-rdma@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Link: https://lore.kernel.org/r/20221123122523.1332370-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24media: mceusb: set timeout to at least timeout providedSean Young1-1/+1
By rounding down, the actual timeout can be lower than requested. As a result, long spaces just below the requested timeout can be incorrectly reported as timeout and truncated. Fixes: 877f1a7cee3f ("media: rc: mceusb: allow the timeout to be configurable") Cc: stable@vger.kernel.org Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: imon: Remove the unneeded result variableye xingchen1-3/+1
Return the value send_packet() directly instead of storing it in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: mceusb: Use new usb_control_msg_*() routinesAlan Stern1-21/+14
Automatic kernel fuzzing led to a WARN about invalid pipe direction in the mceusb driver: ------------[ cut here ]------------ usb 6-1: BOGUS control dir, pipe 80000380 doesn't match bRequestType 40 WARNING: CPU: 0 PID: 2465 at drivers/usb/core/urb.c:410 usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410 Modules linked in: CPU: 0 PID: 2465 Comm: kworker/0:2 Not tainted 5.19.0-rc4-00208-g69cb6c6556ad #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410 Code: 7c 24 40 e8 ac 23 91 fd 48 8b 7c 24 40 e8 b2 70 1b ff 45 89 e8 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 a0 30 a9 86 e8 48 07 11 02 <0f> 0b e9 1c f0 ff ff e8 7e 23 91 fd 0f b6 1d 63 22 83 05 31 ff 41 RSP: 0018:ffffc900032becf0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881100f3058 RCX: 0000000000000000 RDX: ffffc90004961000 RSI: ffff888114c6d580 RDI: fffff52000657d90 RBP: ffff888105ad90f0 R08: ffffffff812c3638 R09: 0000000000000000 R10: 0000000000000005 R11: ffffed1023504ef1 R12: ffff888105ad9000 R13: 0000000000000040 R14: 0000000080000380 R15: ffff88810ba96500 FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe810bda58 CR3: 000000010b720000 CR4: 0000000000350ef0 Call Trace: <TASK> usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153 mceusb_gen1_init drivers/media/rc/mceusb.c:1431 [inline] mceusb_dev_probe+0x258e/0x33f0 drivers/media/rc/mceusb.c:1807 The reason for the warning is clear enough; the driver sends an unusual read request on endpoint 0 but does not set the USB_DIR_IN bit in the bRequestType field. More importantly, the whole situation can be avoided and the driver simplified by converting it over to the relatively new usb_control_msg_recv() and usb_control_msg_send() routines. That's what this fix does. Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com> Link: https://lore.kernel.org/all/CAB7eexLLApHJwZfMQ=X-PtRhw0BgO+5KcSMS05FNUYejJXqtSA@mail.gmail.com/ Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-15media: lirc: ensure lirc device receives repeatsMarko Mäkelä1-1/+2
Pressing a button on a remote control unit will typically lead to messages being sent several times per second until the button is released. Some remote control units indicate long key presses by sending special "repeat" messages, for which the protocol driver calls rc_repeat(). Other units repeat the same message over and over, which will be handled by calling rc_keydown(). The function rc_keydown() never set the LIRC "repeat" flag to distinguish repeated messages that were sent due to a long keypress, and messages sent due to repeated short keypresses. While a user-space program may implement special logic to distinguish long keypresses, it is much simpler to be able to rely on the flag. Commit de142c32410649e64d44928505ffad2176a96a9e ("media: lirc: implement reading scancode") would never set the LIRC_SCANCODE_FLAG_REPEAT flag. Commit b66218fddfd29f315a103db811152ab0c95fb054 ("media: lirc: ensure lirc device receives nec repeats") fixed it up for rc_repeat() but not rc_keydown(). Signed-off-by: Marko Mäkelä <marko.makela@iki.fi> Co-developed-by: Sean Young <sean@mess.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-15media: ati-remote: remove private err() macroOliver Neukum1-6/+5
Drivers should use dev_err() Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-15media: igorplugusb: use correct size pass to igorplugusb_probe()Yang Yingliang1-2/+2
After 'buf_in' change to pointer, the sizeof() is not correct buffer size, it should be MAX_PACKET. Fixes: b3f820b905c9 ("media: igorplugusb: respect DMA coherency") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: rc: Directly use ida_free()keliu2-6/+6
Use ida_alloc() and ida_free() instead of the deprecated ida_simple_get() and ida_simple_remove(). Signed-off-by: keliu <liuke94@huawei.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: ttusbir: avoid unnecessary usb_unlink_urb()Oliver Neukum1-2/+0
While the completion handler is running, usb_unlink_urb() on yourself is a NOP. Remove it. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: ttusbir: NOIO during resumeOliver Neukum1-1/+1
During resume we must assume tat devices are not ready for block IO. Use GFP_NOIO. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: xbox_remote: xbox_remote_initialize() cannot failOliver Neukum1-7/+3
It cannot fail. Make it void. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: streamzap: avoid unnecessary GFP_ATOMICOliver Neukum1-1/+1
During resume() GFP_NOIO is enough. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: redrat3: no unnecessary GFP_ATOMICOliver Neukum1-2/+2
During resume() GFP_NOIO will do. No need for GFP_ATOMIC Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: imon_raw: respect DMA coherencyOliver Neukum1-4/+12
No buffer can be embedded inside a descriptor, not even a simple be64. Use a separate kmalloc() Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: iguanair: no superfluous usb_unlink_urb()Oliver Neukum1-4/+1
Unlinking yourself while the completion handler is running is a NOP. Drop it. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: igorplugusb: remove superfluous usb_unlink_urb()Oliver Neukum1-1/+0
Calling that on yourself while the completion handler is running is a NOP. Remove it. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: igorplugusb: break cyclical race on disconnectOliver Neukum1-2/+5
The driver uses a timer, that may submit the URB and the URB may start the timer. No simple order of killing can break te cycle. Poison the URB before killing the timer. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: igorplugusb: prevent use after free in probe errorOliver Neukum1-2/+2
The timer uses the URB. Free it only after the timer has been stopped. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: igorplugusb: respect DMA coherencyOliver Neukum1-1/+6
The coherency rules mean that you cannot embed a buffer inside a descriptor. kmalloc() separately. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-03Merge tag 'usb-5.19-rc1' of ↵Linus Torvalds4-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...
2022-05-25Merge tag 'net-next-5.19' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core ---- - Support TCPv6 segmentation offload with super-segments larger than 64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP). - Generalize skb freeing deferral to per-cpu lists, instead of per-socket lists. - Add a netdev statistic for packets dropped due to L2 address mismatch (rx_otherhost_dropped). - Continue work annotating skb drop reasons. - Accept alternative netdev names (ALT_IFNAME) in more netlink requests. - Add VLAN support for AF_PACKET SOCK_RAW GSO. - Allow receiving skb mark from the socket as a cmsg. - Enable memcg accounting for veth queues, sysctl tables and IPv6. BPF --- - Add libbpf support for User Statically-Defined Tracing (USDTs). - Speed up symbol resolution for kprobes multi-link attachments. - Support storing typed pointers to referenced and unreferenced objects in BPF maps. - Add support for BPF link iterator. - Introduce access to remote CPU map elements in BPF per-cpu map. - Allow middle-of-the-road settings for the kernel.unprivileged_bpf_disabled sysctl. - Implement basic types of dynamic pointers e.g. to allow for dynamically sized ringbuf reservations without extra memory copies. Protocols --------- - Retire port only listening_hash table, add a second bind table hashed by port and address. Avoid linear list walk when binding to very popular ports (e.g. 443). - Add bridge FDB bulk flush filtering support allowing user space to remove all FDB entries matching a condition. - Introduce accept_unsolicited_na sysctl for IPv6 to implement router-side changes for RFC9131. - Support for MPTCP path manager in user space. - Add MPTCP support for fallback to regular TCP for connections that have never connected additional subflows or transmitted out-of-sequence data (partial support for RFC8684 fallback). - Avoid races in MPTCP-level window tracking, stabilize and improve throughput. - Support lockless operation of GRE tunnels with seq numbers enabled. - WiFi support for host based BSS color collision detection. - Add support for SO_TXTIME/SCM_TXTIME on CAN sockets. - Support transmission w/o flow control in CAN ISOTP (ISO 15765-2). - Support zero-copy Tx with TLS 1.2 crypto offload (sendfile). - Allow matching on the number of VLAN tags via tc-flower. - Add tracepoint for tcp_set_ca_state(). Driver API ---------- - Improve error reporting from classifier and action offload. - Add support for listing line cards in switches (devlink). - Add helpers for reporting page pool statistics with ethtool -S. - Add support for reading clock cycles when using PTP virtual clocks, instead of having the driver convert to time before reporting. This makes it possible to report time from different vclocks. - Support configuring low-latency Tx descriptor push via ethtool. - Separate Clause 22 and Clause 45 MDIO accesses more explicitly. New hardware / drivers ---------------------- - Ethernet: - Marvell's Octeon NIC PCI Endpoint support (octeon_ep) - Sunplus SP7021 SoC (sp7021_emac) - Add support for Renesas RZ/V2M (in ravb) - Add support for MediaTek mt7986 switches (in mtk_eth_soc) - Ethernet PHYs: - ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting) - TI DP83TD510 PHY - Microchip LAN8742/LAN88xx PHYs - WiFi: - Driver for pureLiFi X, XL, XC devices (plfxlc) - Driver for Silicon Labs devices (wfx) - Support for WCN6750 (in ath11k) - Support Realtek 8852ce devices (in rtw89) - Mobile: - MediaTek T700 modems (Intel 5G 5000 M.2 cards) - CAN: - ctucanfd: add support for CTU CAN FD open-source IP core from Czech Technical University in Prague Drivers ------- - Delete a number of old drivers still using virt_to_bus(). - Ethernet NICs: - intel: support TSO on tunnels MPLS - broadcom: support multi-buffer XDP - nfp: support VF rate limiting - sfc: use hardware tx timestamps for more than PTP - mlx5: multi-port eswitch support - hyper-v: add support for XDP_REDIRECT - atlantic: XDP support (including multi-buffer) - macb: improve real-time perf by deferring Tx processing to NAPI - High-speed Ethernet switches: - mlxsw: implement basic line card information querying - prestera: add support for traffic policing on ingress and egress - Embedded Ethernet switches: - lan966x: add support for packet DMA (FDMA) - lan966x: add support for PTP programmable pins - ti: cpsw_new: enable bc/mc storm prevention - Qualcomm 802.11ax WiFi (ath11k): - Wake-on-WLAN support for QCA6390 and WCN6855 - device recovery (firmware restart) support - support setting Specific Absorption Rate (SAR) for WCN6855 - read country code from SMBIOS for WCN6855/QCA6390 - enable keep-alive during WoWLAN suspend - implement remain-on-channel support - MediaTek WiFi (mt76): - support Wireless Ethernet Dispatch offloading packet movement between the Ethernet switch and WiFi interfaces - non-standard VHT MCS10-11 support - mt7921 AP mode support - mt7921 IPv6 NS offload support - Ethernet PHYs: - micrel: ksz9031/ksz9131: cabletest support - lan87xx: SQI support for T1 PHYs - lan937x: add interrupt support for link detection" * tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits) ptp: ocp: Add firmware header checks ptp: ocp: fix PPS source selector debugfs reporting ptp: ocp: add .init function for sma_op vector ptp: ocp: vectorize the sma accessor functions ptp: ocp: constify selectors ptp: ocp: parameterize input/output sma selectors ptp: ocp: revise firmware display ptp: ocp: add Celestica timecard PCI ids ptp: ocp: Remove #ifdefs around PCI IDs ptp: ocp: 32-bit fixups for pci start address Revert "net/smc: fix listen processing for SMC-Rv2" ath6kl: Use cc-disable-warning to disable -Wdangling-pointer selftests/bpf: Dynptr tests bpf: Add dynptr data slices bpf: Add bpf_dynptr_read and bpf_dynptr_write bpf: Dynptr support for ring buffers bpf: Add bpf_dynptr_from_mem for local dynptrs bpf: Add verifier support for dynptrs bpf: Suppress 'passing zero to PTR_ERR' warning bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack ...
2022-05-13media: imon: reorganize serializationTetsuo Handa1-52/+47
Since usb_register_dev() from imon_init_display() from imon_probe() holds minor_rwsem while display_open() which holds driver_lock and ictx->lock is called with minor_rwsem held from usb_open(), holding driver_lock or ictx->lock when calling usb_register_dev() causes circular locking dependency problem. Since usb_deregister_dev() from imon_disconnect() holds minor_rwsem while display_open() which holds driver_lock is called with minor_rwsem held, holding driver_lock when calling usb_deregister_dev() also causes circular locking dependency problem. Sean Young explained that the problem is there are imon devices which have two usb interfaces, even though it is one device. The probe and disconnect function of both usb interfaces can run concurrently. Alan Stern responded that the driver and USB cores guarantee that when an interface is probed, both the interface and its USB device are locked. Ditto for when the disconnect callback gets run. So concurrent probing/ disconnection of multiple interfaces on the same device is not possible. Therefore, we don't need locks for handling race between imon_probe() and imon_disconnect(). But we still need to handle race between display_open() /vfd_write()/lcd_write()/display_close() and imon_disconnect(), for disconnect event can happen while file descriptors are in use. Since "struct file"->private_data is set by display_open(), vfd_write()/ lcd_write()/display_close() can assume that "struct file"->private_data is not NULL even after usb_set_intfdata(interface, NULL) was called. Replace insufficiently held driver_lock with refcount_t based management. Add a boolean flag for recording whether imon_disconnect() was already called. Use RCU for accessing this boolean flag and refcount_t. Since the boolean flag for imon_disconnect() is shared, disconnect event on either intf0 or intf1 affects both interfaces. But I assume that this change does not matter, for usually disconnect event would not happen while interfaces are in use. Link: https://syzkaller.appspot.com/bug?extid=c558267ad910fc494497 Reported-by: syzbot <syzbot+c558267ad910fc494497@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: syzbot <syzbot+c558267ad910fc494497@syzkaller.appspotmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: imon: drop references only after device is no longer usedOliver Neukum1-2/+2
The point of using get/put_device() is to keep references for as long as the device may be in use. That means dropping them must be the penultimate action right before freeing the memory. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: imon: fix timer racing disconnectOliver Neukum1-1/+1
The timer will report events for an input device. Reporting events for an unregistered device is bad. Hence the timer must be killed first. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: imon: avoid needless atomic allocations in resumeOliver Neukum1-2/+2
GFP_NOIO is fine here. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-08media: gpio-ir-tx: simplify wait logicSean Young1-1/+6
Do not handroll mdelay(). Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-04-24media: meson-ir-tx: remove superfluous dev_err()Yihao Han1-3/+1
Remove dev_err() messages after platform_get_irq*() failures. platform_get_irq() already prints an error. Generated by: scripts/coccinelle/api/platform_get_irq.cocci Signed-off-by: Yihao Han <hanyihao@vivo.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-04-23media: remove third argument of usb_maxpacket()Vincent Mailhol4-5/+5
The third argument of usb_maxpacket(): in_out has been deprecated because it could be derived from the second argument (e.g. using usb_pipeout(pipe)). N.B. function usb_maxpacket() was made variadic to accommodate the transition from the old prototype with three arguments to the new one with only two arguments (so that no renaming is needed). The variadic argument is to be removed once all users of usb_maxpacket() get migrated. CC: Sean Young <sean@mess.org> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: Benjamin Valentin <benpicco@googlemail.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20220317035514.6378-5-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-19bpf: Move rcu lock management out of BPF_PROG_RUN routinesStanislav Fomichev1-2/+6
Commit 7d08c2c91171 ("bpf: Refactor BPF_PROG_RUN_ARRAY family of macros into functions") switched a bunch of BPF_PROG_RUN macros to inline routines. This changed the semantic a bit. Due to arguments expansion of macros, it used to be: rcu_read_lock(); array = rcu_dereference(cgrp->bpf.effective[atype]); ... Now, with with inline routines, we have: array_rcu = rcu_dereference(cgrp->bpf.effective[atype]); /* array_rcu can be kfree'd here */ rcu_read_lock(); array = rcu_dereference(array_rcu); I'm assuming in practice rcu subsystem isn't fast enough to trigger this but let's use rcu API properly. Also, rename to lower caps to not confuse with macros. Additionally, drop and expand BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY. See [1] for more context. [1] https://lore.kernel.org/bpf/CAKH8qBs60fOinFdxiiQikK_q0EcVxGvNTQoWvHLEUGbgcj1UYg@mail.gmail.com/T/#u v2 - keep rcu locks inside by passing cgroup_bpf Fixes: 7d08c2c91171 ("bpf: Refactor BPF_PROG_RUN_ARRAY family of macros into functions") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20220414161233.170780-1-sdf@google.com
2022-03-18media: media/*/Kconfig: sort entriesMauro Carvalho Chehab1-187/+189
Currently, the idems inside media Kconfig are out of order. Sort them using the script below: <script> use strict; use warnings; my %config; my @source; my $out; sub flush_config() { if (scalar %config) { for my $c (sort keys %config) { $out .= $config{$c} . "\n"; } %config = (); } return if (!scalar @source); $out .= "\n"; for my $s (sort @source) { $out .= $s; } $out .= "\n"; @source = (); } sub sort_kconfig($) { my $fname = shift; my $cur_config = ""; @source = (); $out = ""; %config = (); open IN, $fname or die; while (<IN>) { if (m/^config\s+(.*)/) { $cur_config = $1; $config{$cur_config} .= $_; } elsif (m/^source\s+(.*)/) { push @source, $_; } elsif (m/^\s+/) { if ($cur_config eq "") { $out .= $_; } else { $config{$cur_config} .= $_; } } else { flush_config(); $cur_config = ""; $out .= $_; } } close IN or die; flush_config(); $out =~ s/\n\n+/\n\n/g; $out =~ s/\n+$/\n/; open OUT, ">$fname"; print OUT $out; close OUT; } for my $fname(@ARGV) { sort_kconfig $fname } </script> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-03-14media: Makefiles: sort entries where it fitsMauro Carvalho Chehab2-36/+45
Alphabetically sort entries at the Makefiles per group, in ASCII order, e. g., using the output of: $ LC_ALL=C sort Makefile |grep obj-y ... $ LC_ALL=C sort Makefile |grep obj.*CONFIG ... Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-03-07media: gpio-ir-tx: fix transmit with long spaces on Orange Pi PCSean Young1-7/+21
Calling udelay for than 1000us does not always yield the correct results. Cc: stable@vger.kernel.org Reported-by: Михаил <vrserver1@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-02-22media: meson-ir-tx: remove incorrect doc commentSean Young1-1/+1
Do not use kernel-doc "/**" notation when the comment is not in kernel-doc format. This fixes a sparse warning. Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-01-28media: lirc: report ir receiver overflowSean Young2-8/+11
If the driver reports that the hardware had an overflow, report this to userspace. It would be nice to know when this happens, and not just get a long space. This change has been tested with lircd, ir-ctl, and ir-keytable. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-28media: rc-core: rename ir_raw_event_reset to ir_raw_event_overflowSean Young23-28/+26
The driver report a reset event when the hardware reports and overflow. There is no reason to have a generic "reset" event. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-24media: mtk-cir: simplify codeSean Young1-3/+4
Re-write without unnecessary shifts. Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-24media: mtk-cir: remove superfluous ir_raw_event_reset()Sean Young1-12/+11
This IR receiver has two limitations: 1) Any IR pulse or space longer than 12ms will be truncated to 12ms 2) Any pulses/spaces after the first 68 are lost ir_raw_event_reset() won't help here. If the IR cannot be decoded, any decoder should reset itself, and if it does not, this is a bug in the decoder. Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-24media: mtk-cir: reduce message end to fix nec repeatsSean Young1-4/+5
The ir receiver generates an interrupt with the IR data, once a space of at least ok_count is has been seen. Currently this is about 110ms; when holding down a button on a nec remote, no such space is seen until the button is released. This means nothing happens until you release the button. The sample rate is fixed at 46us, so the maximum space that can be encoded is about 12ms. So, the set ok_count above that at 23ms. Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-24media: lirc: simplify gap calculationSean Young1-13/+6
When a driver reports a timeout, no more IR activity will be reported until the next pulse. A space is inserted between the timeout and the next pulse, based on ktime. The timeout reports already a duration, so this duration should not be added to the gap. Otherwise there is no change to the functionality. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-24media: ir_toy: free before error exitingPeiwei Hu1-1/+1
Fix leak in error path. Signed-off-by: Peiwei Hu <jlu.hpw@foxmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2021-12-14media: streamzap: remove redundant gap calculationsSean Young1-47/+8
The lirc core already introduces gaps, so there is no need for this in the driver. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-14media: streamzap: remove unused struct membersSean Young1-23/+14
These struct members do not serve any purpose. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-14media: streamzap: less chatterSean Young1-19/+1
Remove superfluous messages which add no information. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-14media: streamzap: no need for usb pid/vid in device nameSean Young1-5/+1
The usb pid/vid can be found elsewhere, the idVendor/idProduct usb sysfs files for example. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-14media: streamzap: remove unnecessary ir_raw_event_reset and handleSean Young1-2/+0
There is no reason to have a reset after an IR timeout. Calling ir_raw_event_handle() twice for the same interrupt has no affect. Fixes: 56b0ec30c4bc ("[media] rc/streamzap: fix reporting response times") Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-12-14media: igorplugusb: receiver overflow should be reportedSean Young1-1/+3
Without this, some IR will be missing mid-stream and we might decode something which never really occurred. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 05:44:04 +0000