media: media/*/Kconfig: sort entries

Currently, the idems inside media Kconfig are out of order.
Sort them using the script below:

<script>
use strict;
use warnings;

my %config;
my @source;
my $out;

sub flush_config()
{
	if (scalar %config) {
		for my $c (sort keys %config) {
			$out .= $config{$c} . "\n";
		}
		%config = ();
	}

	return if (!scalar @source);

	$out .= "\n";
	for my $s (sort @source) {
		$out .= $s;
	}
	$out .= "\n";

	@source = ();
}

sub sort_kconfig($)
{
	my $fname = shift;
	my $cur_config = "";

	@source = ();
	$out = "";
	%config = ();

	open IN, $fname or die;
	while (<IN>) {
		if (m/^config\s+(.*)/) {
			$cur_config = $1;
			$config{$cur_config} .= $_;
		} elsif (m/^source\s+(.*)/) {
			push @source, $_;
		} elsif (m/^\s+/) {
			if ($cur_config eq "") {
				$out .= $_;
			} else {
				$config{$cur_config} .= $_;
			}
		} else {
			flush_config();
			$cur_config = "";
			$out .= $_;
		}
	}
	close IN or die;

	flush_config();

	$out =~ s/\n\n+/\n\n/g;
	$out =~ s/\n+$/\n/;

	open OUT, ">$fname";
	print OUT $out;
	close OUT;
}

for my $fname(@ARGV) {
	sort_kconfig $fname
}
</script>

Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

1 files changed, 189 insertions, 187 deletions

diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index c111af820ae4..f560fc38895f 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -15,15 +15,6 @@ menuconfig RC_CORE
 	  Say Y when you have a TV or an IR device.
 
 if RC_CORE
-source "drivers/media/rc/keymaps/Kconfig"
-
-config LIRC
-	bool "LIRC user interface"
-	help
-	   Enable this option to enable the Linux Infrared Remote
-	   Control user interface (e.g. /dev/lirc*). This interface
-	   passes raw IR to and from userspace, which is needed for
-	   IR transmitting (aka "blasting") and for the lirc daemon.
 
 config BPF_LIRC_MODE2
 	bool "Support for eBPF programs attached to lirc devices"
@@ -38,10 +29,45 @@ config BPF_LIRC_MODE2
 	   These eBPF programs can be used to decode IR into scancodes, for
 	   IR protocols not supported by the kernel decoders.
 
+config LIRC
+	bool "LIRC user interface"
+	help
+	   Enable this option to enable the Linux Infrared Remote
+	   Control user interface (e.g. /dev/lirc*). This interface
+	   passes raw IR to and from userspace, which is needed for
+	   IR transmitting (aka "blasting") and for the lirc daemon.
+
+source "drivers/media/rc/keymaps/Kconfig"
+
 menuconfig RC_DECODERS
 	bool "Remote controller decoders"
 
 if RC_DECODERS
+
+config IR_IMON_DECODER
+	tristate "Enable IR raw decoder for the iMON protocol"
+	help
+	   Enable this option if you have iMON PAD or Antec Veris infrared
+	   remote control and you would like to use it with a raw IR
+	   receiver, or if you wish to use an encoder to transmit this IR.
+
+config IR_JVC_DECODER
+	tristate "Enable IR raw decoder for the JVC protocol"
+	select BITREVERSE
+
+	help
+	   Enable this option if you have an infrared remote control which
+	   uses the JVC protocol, and you need software decoding support.
+
+config IR_MCE_KBD_DECODER
+	tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
+	select BITREVERSE
+
+	help
+	   Enable this option if you have a Microsoft Remote Keyboard for
+	   Windows Media Center Edition, which you would like to use with
+	   a raw IR receiver in your system.
+
 config IR_NEC_DECODER
 	tristate "Enable IR raw decoder for the NEC protocol"
 	select BITREVERSE
@@ -66,21 +92,17 @@ config IR_RC6_DECODER
 	   Enable this option if you have an infrared remote control which
 	   uses the RC6 protocol, and you need software decoding support.
 
-config IR_JVC_DECODER
-	tristate "Enable IR raw decoder for the JVC protocol"
-	select BITREVERSE
-
+config IR_RCMM_DECODER
+	tristate "Enable IR raw decoder for the RC-MM protocol"
 	help
-	   Enable this option if you have an infrared remote control which
-	   uses the JVC protocol, and you need software decoding support.
-
-config IR_SONY_DECODER
-	tristate "Enable IR raw decoder for the Sony protocol"
-	select BITREVERSE
+	   Enable this option when you have IR with RC-MM protocol, and
+	   you need the software decoder. The driver supports 12,
+	   24 and 32 bits RC-MM variants. You can enable or disable the
+	   different modes using the following RC protocol keywords:
+	   'rc-mm-12', 'rc-mm-24' and 'rc-mm-32'.
 
-	help
-	   Enable this option if you have an infrared remote control which
-	   uses the Sony protocol, and you need software decoding support.
+	   To compile this driver as a module, choose M here: the module
+	   will be called ir-rcmm-decoder.
 
 config IR_SANYO_DECODER
 	tristate "Enable IR raw decoder for the Sanyo protocol"
@@ -100,14 +122,13 @@ config IR_SHARP_DECODER
 	   uses the Sharp protocol (Sharp, Denon), and you need software
 	   decoding support.
 
-config IR_MCE_KBD_DECODER
-	tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
+config IR_SONY_DECODER
+	tristate "Enable IR raw decoder for the Sony protocol"
 	select BITREVERSE
 
 	help
-	   Enable this option if you have a Microsoft Remote Keyboard for
-	   Windows Media Center Edition, which you would like to use with
-	   a raw IR receiver in your system.
+	   Enable this option if you have an infrared remote control which
+	   uses the Sony protocol, and you need software decoding support.
 
 config IR_XMP_DECODER
 	tristate "Enable IR raw decoder for the XMP protocol"
@@ -117,25 +138,6 @@ config IR_XMP_DECODER
 	   Enable this option if you have IR with XMP protocol, and
 	   if the IR is decoded in software
 
-config IR_IMON_DECODER
-	tristate "Enable IR raw decoder for the iMON protocol"
-	help
-	   Enable this option if you have iMON PAD or Antec Veris infrared
-	   remote control and you would like to use it with a raw IR
-	   receiver, or if you wish to use an encoder to transmit this IR.
-
-config IR_RCMM_DECODER
-	tristate "Enable IR raw decoder for the RC-MM protocol"
-	help
-	   Enable this option when you have IR with RC-MM protocol, and
-	   you need the software decoder. The driver supports 12,
-	   24 and 32 bits RC-MM variants. You can enable or disable the
-	   different modes using the following RC protocol keywords:
-	   'rc-mm-12', 'rc-mm-24' and 'rc-mm-32'.
-
-	   To compile this driver as a module, choose M here: the module
-	   will be called ir-rcmm-decoder.
-
 endif #RC_DECODERS
 
 menuconfig RC_DEVICES
@@ -143,23 +145,6 @@ menuconfig RC_DEVICES
 
 if RC_DEVICES
 
-config RC_ATI_REMOTE
-	tristate "ATI / X10 based USB RF remote controls"
-	depends on USB
-	help
-	   Say Y here if you want to use an X10 based USB remote control.
-	   These are RF remotes with USB receivers.
-
-	   Such devices include the ATI remote that comes with many of ATI's
-	   All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote,
-	   Medion RF remote, and SnapStream FireFly remote.
-
-	   This driver provides mouse pointer, left and right mouse buttons,
-	   and maps all the other remote buttons to keypress events.
-
-	   To compile this driver as a module, choose M here: the module will be
-	   called ati_remote.
-
 config IR_ENE
 	tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
 	depends on PNP || COMPILE_TEST
@@ -173,6 +158,37 @@ config IR_ENE
 	   To compile this driver as a module, choose M here: the
 	   module will be called ene_ir.
 
+config IR_FINTEK
+	tristate "Fintek Consumer Infrared Transceiver"
+	depends on PNP || COMPILE_TEST
+	help
+	   Say Y here to enable support for integrated infrared receiver
+	   /transceiver made by Fintek. This chip is found on assorted
+	   Jetway motherboards (and of course, possibly others).
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called fintek-cir.
+
+config IR_GPIO_CIR
+	tristate "GPIO IR remote control"
+	depends on (OF && GPIOLIB) || COMPILE_TEST
+	help
+	   Say Y if you want to use GPIO based IR Receiver.
+
+	   To compile this driver as a module, choose M here: the module will
+	   be called gpio-ir-recv.
+
+config IR_GPIO_TX
+	tristate "GPIO IR Bit Banging Transmitter"
+	depends on LIRC
+	depends on (OF && GPIOLIB) || COMPILE_TEST
+	help
+	   Say Y if you want to a GPIO based IR transmitter. This is a
+	   bit banging driver.
+
+	   To compile this driver as a module, choose M here: the module will
+	   be called gpio-ir-tx.
+
 config IR_HIX5HD2
 	tristate "Hisilicon hix5hd2 IR remote control"
 	depends on (OF && HAS_IOMEM) || COMPILE_TEST
@@ -183,6 +199,33 @@ config IR_HIX5HD2
 
 	   If you're not sure, select N here
 
+config IR_IGORPLUGUSB
+	tristate "IgorPlug-USB IR Receiver"
+	depends on USB
+	help
+	   Say Y here if you want to use the IgorPlug-USB IR Receiver by
+	   Igor Cesko. This device is included on the Fit-PC2.
+
+	   Note that this device can only record bursts of 36 IR pulses and
+	   spaces, which is not enough for the NEC, Sanyo and RC-6 protocol.
+
+	   To compile this driver as a module, choose M here: the module will
+	   be called igorplugusb.
+
+config IR_IGUANA
+	tristate "IguanaWorks USB IR Transceiver"
+	depends on USB
+	help
+	   Say Y here if you want to use the IguanaWorks USB IR Transceiver.
+	   Both infrared receive and send are supported. If you want to
+	   change the ID or the pin config, use the user space driver from
+	   IguanaWorks.
+
+	   Only firmware 0x0205 and later is supported.
+
+	   To compile this driver as a module, choose M here: the module will
+	   be called iguanair.
+
 config IR_IMON
 	tristate "SoundGraph iMON Receiver and Display"
 	depends on USB
@@ -203,16 +246,6 @@ config IR_IMON_RAW
 	   To compile this driver as a module, choose M here: the
 	   module will be called imon_raw.
 
-config IR_MCEUSB
-	tristate "Windows Media Center Ed. eHome Infrared Transceiver"
-	depends on USB
-	help
-	   Say Y here if you want to use a Windows Media Center Edition
-	   eHome Infrared Transceiver.
-
-	   To compile this driver as a module, choose M here: the
-	   module will be called mceusb.
-
 config IR_ITE_CIR
 	tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
 	depends on PNP || COMPILE_TEST
@@ -225,16 +258,15 @@ config IR_ITE_CIR
 	   To compile this driver as a module, choose M here: the
 	   module will be called ite-cir.
 
-config IR_FINTEK
-	tristate "Fintek Consumer Infrared Transceiver"
-	depends on PNP || COMPILE_TEST
+config IR_MCEUSB
+	tristate "Windows Media Center Ed. eHome Infrared Transceiver"
+	depends on USB
 	help
-	   Say Y here to enable support for integrated infrared receiver
-	   /transceiver made by Fintek. This chip is found on assorted
-	   Jetway motherboards (and of course, possibly others).
+	   Say Y here if you want to use a Windows Media Center Edition
+	   eHome Infrared Transceiver.
 
 	   To compile this driver as a module, choose M here: the
-	   module will be called fintek-cir.
+	   module will be called mceusb.
 
 config IR_MESON
 	tristate "Amlogic Meson IR remote receiver"
@@ -278,6 +310,18 @@ config IR_NUVOTON
 	   To compile this driver as a module, choose M here: the
 	   module will be called nuvoton-cir.
 
+config IR_PWM_TX
+	tristate "PWM IR transmitter"
+	depends on LIRC
+	depends on PWM
+	depends on OF || COMPILE_TEST
+	help
+	   Say Y if you want to use a PWM based IR transmitter. This is
+	   more power efficient than the bit banging gpio driver.
+
+	   To compile this driver as a module, choose M here: the module will
+	   be called pwm-ir-tx.
+
 config IR_REDRAT3
 	tristate "RedRat3 IR Transceiver"
 	depends on USB
@@ -289,6 +333,31 @@ config IR_REDRAT3
 	   To compile this driver as a module, choose M here: the
 	   module will be called redrat3.
 
+config IR_RX51
+	tristate "Nokia N900 IR transmitter diode"
+	depends on (OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS || COMPILE_TEST) && RC_CORE
+	help
+	   Say Y or M here if you want to enable support for the IR
+	   transmitter diode built in the Nokia N900 (RX51) device.
+
+	   The driver uses omap DM timers for generating the carrier
+	   wave and pulses.
+
+config IR_SERIAL
+	tristate "Homebrew Serial Port Receiver"
+	help
+	   Say Y if you want to use Homebrew Serial Port Receivers and
+	   Transceivers.
+
+	   To compile this driver as a module, choose M here: the module will
+	   be called serial-ir.
+
+config IR_SERIAL_TRANSMITTER
+	bool "Serial Port Transmitter"
+	depends on IR_SERIAL
+	help
+	   Serial Port Transmitter support
+
 config IR_SPI
 	tristate "SPI connected IR LED"
 	depends on SPI && LIRC
@@ -309,47 +378,24 @@ config IR_STREAMZAP
 	   To compile this driver as a module, choose M here: the
 	   module will be called streamzap.
 
-config IR_WINBOND_CIR
-	tristate "Winbond IR remote control"
-	depends on (X86 && PNP) || COMPILE_TEST
-	select NEW_LEDS
-	select LEDS_CLASS
-	select BITREVERSE
-	help
-	   Say Y here if you want to use the IR remote functionality found
-	   in some Winbond SuperI/O chips. Currently only the WPCD376I
-	   chip is supported (included in some Intel Media series
-	   motherboards).
-
-	   To compile this driver as a module, choose M here: the module will
-	   be called winbond_cir.
-
-config IR_IGORPLUGUSB
-	tristate "IgorPlug-USB IR Receiver"
-	depends on USB
+config IR_SUNXI
+	tristate "SUNXI IR remote control"
+	depends on ARCH_SUNXI || COMPILE_TEST
 	help
-	   Say Y here if you want to use the IgorPlug-USB IR Receiver by
-	   Igor Cesko. This device is included on the Fit-PC2.
-
-	   Note that this device can only record bursts of 36 IR pulses and
-	   spaces, which is not enough for the NEC, Sanyo and RC-6 protocol.
+	   Say Y if you want to use sunXi internal IR Controller
 
 	   To compile this driver as a module, choose M here: the module will
-	   be called igorplugusb.
+	   be called sunxi-ir.
 
-config IR_IGUANA
-	tristate "IguanaWorks USB IR Transceiver"
+config IR_TOY
+	tristate "Infrared Toy and IR Droid"
 	depends on USB
 	help
-	   Say Y here if you want to use the IguanaWorks USB IR Transceiver.
-	   Both infrared receive and send are supported. If you want to
-	   change the ID or the pin config, use the user space driver from
-	   IguanaWorks.
-
-	   Only firmware 0x0205 and later is supported.
+	   Say Y here if you want to use the Infrared Toy or IR Droid, USB
+	   versions.
 
-	   To compile this driver as a module, choose M here: the module will
-	   be called iguanair.
+	   To compile this driver as a module, choose M here: the module will be
+	   called ir_toy.
 
 config IR_TTUSBIR
 	tristate "TechnoTrend USB IR Receiver"
@@ -363,17 +409,37 @@ config IR_TTUSBIR
 	   To compile this driver as a module, choose M here: the module will
 	   be called ttusbir.
 
-config IR_RX51
-	tristate "Nokia N900 IR transmitter diode"
-	depends on (OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS || COMPILE_TEST) && RC_CORE
+config IR_WINBOND_CIR
+	tristate "Winbond IR remote control"
+	depends on (X86 && PNP) || COMPILE_TEST
+	select NEW_LEDS
+	select LEDS_CLASS
+	select BITREVERSE
 	help
-	   Say Y or M here if you want to enable support for the IR
-	   transmitter diode built in the Nokia N900 (RX51) device.
+	   Say Y here if you want to use the IR remote functionality found
+	   in some Winbond SuperI/O chips. Currently only the WPCD376I
+	   chip is supported (included in some Intel Media series
+	   motherboards).
 
-	   The driver uses omap DM timers for generating the carrier
-	   wave and pulses.
+	   To compile this driver as a module, choose M here: the module will
+	   be called winbond_cir.
 
-source "drivers/media/rc/img-ir/Kconfig"
+config RC_ATI_REMOTE
+	tristate "ATI / X10 based USB RF remote controls"
+	depends on USB
+	help
+	   Say Y here if you want to use an X10 based USB remote control.
+	   These are RF remotes with USB receivers.
+
+	   Such devices include the ATI remote that comes with many of ATI's
+	   All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote,
+	   Medion RF remote, and SnapStream FireFly remote.
+
+	   This driver provides mouse pointer, left and right mouse buttons,
+	   and maps all the other remote buttons to keypress events.
+
+	   To compile this driver as a module, choose M here: the module will be
+	   called ati_remote.
 
 config RC_LOOPBACK
 	tristate "Remote Control Loopback Driver"
@@ -387,38 +453,6 @@ config RC_LOOPBACK
 	   To compile this driver as a module, choose M here: the module will
 	   be called rc_loopback.
 
-config IR_GPIO_CIR
-	tristate "GPIO IR remote control"
-	depends on (OF && GPIOLIB) || COMPILE_TEST
-	help
-	   Say Y if you want to use GPIO based IR Receiver.
-
-	   To compile this driver as a module, choose M here: the module will
-	   be called gpio-ir-recv.
-
-config IR_GPIO_TX
-	tristate "GPIO IR Bit Banging Transmitter"
-	depends on LIRC
-	depends on (OF && GPIOLIB) || COMPILE_TEST
-	help
-	   Say Y if you want to a GPIO based IR transmitter. This is a
-	   bit banging driver.
-
-	   To compile this driver as a module, choose M here: the module will
-	   be called gpio-ir-tx.
-
-config IR_PWM_TX
-	tristate "PWM IR transmitter"
-	depends on LIRC
-	depends on PWM
-	depends on OF || COMPILE_TEST
-	help
-	   Say Y if you want to use a PWM based IR transmitter. This is
-	   more power efficient than the bit banging gpio driver.
-
-	   To compile this driver as a module, choose M here: the module will
-	   be called pwm-ir-tx.
-
 config RC_ST
 	tristate "ST remote control receiver"
 	depends on ARCH_STI || COMPILE_TEST
@@ -429,30 +463,6 @@ config RC_ST
 
 	   If you're not sure, select N here.
 
-config IR_SUNXI
-	tristate "SUNXI IR remote control"
-	depends on ARCH_SUNXI || COMPILE_TEST
-	help
-	   Say Y if you want to use sunXi internal IR Controller
-
-	   To compile this driver as a module, choose M here: the module will
-	   be called sunxi-ir.
-
-config IR_SERIAL
-	tristate "Homebrew Serial Port Receiver"
-	help
-	   Say Y if you want to use Homebrew Serial Port Receivers and
-	   Transceivers.
-
-	   To compile this driver as a module, choose M here: the module will
-	   be called serial-ir.
-
-config IR_SERIAL_TRANSMITTER
-	bool "Serial Port Transmitter"
-	depends on IR_SERIAL
-	help
-	   Serial Port Transmitter support
-
 config RC_XBOX_DVD
 	tristate "Xbox DVD Movie Playback Kit"
 	depends on USB
@@ -463,15 +473,7 @@ config RC_XBOX_DVD
 	   To compile this driver as a module, choose M here: the module will be
 	   called xbox_remote.
 
-config IR_TOY
-	tristate "Infrared Toy and IR Droid"
-	depends on USB
-	help
-	   Say Y here if you want to use the Infrared Toy or IR Droid, USB
-	   versions.
-
-	   To compile this driver as a module, choose M here: the module will be
-	   called ir_toy.
+source "drivers/media/rc/img-ir/Kconfig"
 
 endif #RC_DEVICES