summaryrefslogtreecommitdiffstats
path: root/drivers/media/i2c/adv7180.c
AgeCommit message (Collapse)AuthorFilesLines
2022-08-16i2c: Make remove callback return voidUwe Kleine-König1-3/+1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-20media: i2c: adv7180: fix reserved bit in Video Selection 2Benjamin Marty1-1/+4
This bit is marked as reserved in the ADV Hardware Reference Manual. Resetting this bit seems to cause increased video noise. Setting this bit according to the Hardware Reference Manual reduces the video noise immediately. Signed-off-by: Benjamin Marty <info@benjaminmarty.ch> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: adv7180: Add support for the test patternsFabio Estevam1-0/+46
ADV7180 has a built-in mechanism to generate some video patterns, which is very useful for debug/bring-up activities. Add support for it. The test_pattern parameter can be one of the following values: 0: "Single color" 1: "Color bars" 2: "Luma ramp" 3: "Boundary box" 4: "Disable" Tested on a imx6q board with an ADV7280. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-02-17media: v4l2-mediabus: Drop V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flagLaurent Pinchart1-2/+1
MIPI CSI-2 continuous and non-continuous clock modes are mutually exclusive. Drop the V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag and use V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK only. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-02-17media: v4l2-mediabus: Drop legacy V4L2_MBUS_CSI2_CHANNEL_* flagsLaurent Pinchart1-1/+0
The V4L2_MBUS_CSI2_CHANNEL_* flags are a legacy API. Only V4L2_MBUS_CSI2_CHANNEL_0 is used, set in a single driver, and never read. Drop those flags. Virtual channel information should be conveyed through frame descriptors instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-02-17media: v4l2-mediabus: Use structures to describe bus configurationLaurent Pinchart1-3/+5
The media bus configuration is specified through a set of flags, some of which being mutually exclusive. This doesn't scale to express more complex configurations. Improve the API by replacing the single flags field in v4l2_mbus_config by a union of v4l2_mbus_config_* structures. The flags themselves are still used in those structures, so they are kept here. Drivers are however updated to use structure fields instead of flags when already possible. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2021-07-22media: i2c: adv7180: fix adv7280 BT.656-4 compatibilityMatthew Michilot1-4/+26
Captured video would be out of sync when using the adv7280 with the BT.656-4 protocol. Certain registers (0x04, 0x31, 0xE6) had to be configured properly to ensure BT.656-4 compatibility. An error in the adv7280 reference manual suggested that EAV/SAV mode was enabled by default, however upon inspecting register 0x31, it was determined to be disabled by default. [fabio: Introduce "adv,force-bt656-4" to not affect the existing users] [hverkuil: fix a small checkpatch alignment warning] Signed-off-by: Matthew Michilot <matthew.michilot@gmail.com> Reviewed-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-22media: i2c: adv7180: Print the chip ID on probeFabio Estevam1-2/+10
Improve the probe message by printing the chip ID version. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-22media: adv7180: Add optional reset GPIOFrieder Schrempf1-0/+24
There is a reset input that can be controlled by GPIO. Let's add it to let the driver control it if required. [hverkuil: fix a small checkpatch alignment warning] Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-17media: v4l2-subdev: add subdev-wide state structTomi Valkeinen1-9/+9
We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: i2c: adv7180: simplify getting state containerKrzysztof Kozlowski1-4/+2
The pointer to 'struct v4l2_subdev' is stored in drvdata via v4l2_i2c_subdev_init() so there is no point of a dance like: struct i2c_client *client = to_i2c_client(struct device *dev) struct v4l2_subdev *sd = i2c_get_clientdata(client); This allows to remove local variable 'client' and few pointer dereferences. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-29media: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-18media: i2c: Use the new get_mbus_config pad opJacopo Mondi1-3/+4
Move the existing users of the g_mbus_config video operation to use the newly introduced get_mbus_config pad operations. All the ported drivers report a static media bus configuration and do no support s_mbus_config so the operation implementation has not changed. Bridge drivers needs to call the new pad operation and will receive an -ENOICTLCMD when calling the old g_mbus_config video operation Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-24media: adv7180: Add init_cfg pad operationNiklas Söderlund1-0/+12
Add a init_cfg pad operation so that configurations allocated with v4l2_subdev_alloc_pad_config() are initialized. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-10-24media: adv7180: Only print 'chip found' message on successful probeFabio Estevam1-3/+3
Currently the "chip found" message is shown even in the case where the I2C address is wrongly passed in the device tree, or also in the case of probe failure, which is misleading. To avoid such problem, move this message after real I2C transactions have been successfully made and we are certain that the adv7180 is really present and probed. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-13media: i2c: adv7180: convert to i2c_new_dummy_deviceWolfram Sang1-6/+6
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-03media: adv7180: add g_skip_frames supportTim Harvey1-0/+15
The adv7180 produces 1 to 2 frames of garbage before proper sync is established. This allows V4L2 drivers and apps to skip those. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: v4l: mediabus: Recognise CSI-2 D-PHY and C-PHYSakari Ailus1-1/+1
The CSI-2 bus may use either D-PHY or C-PHY. Make this visible in media bus enum. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-12media: adv7180: convert to SPDX identifiersKuninori Morimoto1-10/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: adv7180: add g_frame_interval supportNiklas Söderlund1-0/+17
Implement g_frame_interval to return the current standard's frame interval. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: adv7180: fix field type to V4L2_FIELD_ALTERNATENiklas Söderlund1-5/+8
The ADV7180 and ADV7182 transmit whole fields, bottom field followed by top (or vice-versa, depending on detected video standard). So for chips that do not have support for explicitly setting the field mode via I2P, set the field mode to V4L2_FIELD_ALTERNATE. I2P converts fields into frames using an edge adaptive algorithm. The frame rate is the same as the 'field rate': e.g. X fields per second are now X frames per second. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: adv7180/tvp514x/tvp7002: fix entity functionHans Verkuil1-1/+1
The entity function was ORed with the flags field instead of assigned to the function field. Correct this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2017-12-08media: adv7180: Remove duplicate checksAndy Shevchenko1-8/+4
Since i2c_unregister_device() became NULL-aware we may remove duplicate checks. Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31media: adv7180: don't clear V4L2_SUBDEV_FL_IS_I2CAkinobu Mita1-1/+1
The v4l2_i2c_subdev_init() sets V4L2_SUBDEV_FL_IS_I2C flag in the subdev->flags. But this driver overwrites subdev->flags immediately after calling v4l2_i2c_subdev_init(). So V4L2_SUBDEV_FL_IS_I2C is not set after all. This stops breaking subdev->flags and preserves V4L2_SUBDEV_FL_IS_I2C. Side note: According to the comment in v4l2_device_unregister(), this is problematic only if the device is platform bus device. Device tree or ACPI based devices are not affected. Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-20media: adv7180: add missing adv7180cp, adv7180st i2c device IDsUlrich Hecht1-0/+2
Fixes a crash on Renesas R8A7793 Gose board that uses these "compatible" entries. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] media: adv7180: add adv7180cp, adv7180st compatible stringsUlrich Hecht1-0/+2
Used to differentiate between models with 3 and 6 inputs. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-27[media] media: Drop FSF's postal address from the source code filesSakari Ailus1-4/+0
Drop the FSF's postal address from the source code files that typically contain mostly the license text. Of the 628 removed instances, 578 are outdated. The patch has been created with the following command without manual edits: git grep -l "675 Mass Ave\|59 Temple Place\|51 Franklin St" -- \ drivers/media/ include/media|while read i; do i=$i perl -e ' open(F,"< $ENV{i}"); $a=join("", <F>); $a =~ s/[ \t]*\*\n.*You should.*\n.*along with.*\n.*(\n.*USA.*$)?\n//m && $a =~ s/(^.*)Or, (point your browser to) /$1To obtain the license, $2\n$1/m; close(F); open(F, "> $ENV{i}"); print F $a; close(F);'; done Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2016-09-19[media] media: adv7180: fill in mbus format in set_fmtNiklas Söderlund1-2/+4
If the V4L2_SUBDEV_FORMAT_TRY is used in set_fmt the width, height etc would not be filled. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19[media] adv7180: rcar-vin: change mbus format to UYVYNiklas Söderlund1-2/+2
The media bus format reported by the adv7180 is wrong. Steve Longerbeam posted a patch which changed the format to UYVY8_2X8 with the commit message: Change the media bus format from YUYV8_2X8 to UYVY8_2X8. Colors now look correct when capturing with the i.mx6 backend. The other option is to set the SWPC bit in register 0x27 to swap the Cr and Cb output samples. The rcar-vin driver was developed and tested with the adv7180 and therefor suffers from the same issue, looking for the wrong media bus format. The two errors corrected each other. This patch takes Steve's patch and merge it with a fix for rcar-vin driver. The rcar-vin driver is used used in together with the adv7180 och Koelsch and this ensures it will not break while fixing the adv7180 issue. I checked wit Steve and he was fine with me merging the patches. ADV7180 parts: Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Suggested-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24[media] v4l2-subdev: rename cropcap to g_pixelaspectHans Verkuil1-6/+6
The old cropcap video op is now only used to pass the pixelaspect ratio, so rename it. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24[media] media: adv7180: add power pin controlSteve Longerbeam1-0/+27
Some targets control the ADV7180 power pin via a gpio, so add optional support for "powerdown" pin control. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24[media] media: adv7180: define more registersSteve Longerbeam1-24/+49
Replace hard-coded addresses with new register macro defines. No functional changes. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-28[media] media: adv7180: Fix broken interrupt register accessSteve Longerbeam1-9/+9
Access to the interrupt page registers has been broken since at least commit 3999e5d01da7 ("[media] adv7180: Do implicit register paging"). That commit forgot to add the interrupt page number to the register defines. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-05-06[media] media: adv7180: Add of compatible strings for full familyJulian Scheel1-0/+8
Add entries for all supported chip variants into the of_match list, so that the matching driver_info can be selected when using dt. Signed-off-by: Julian Scheel <julian@jusst.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-25[media] adv7180: fix broken standards handlingHans Verkuil1-38/+80
The adv7180 attempts to autodetect the standard. Unfortunately this is seriously broken. This patch removes the autodetect completely. Only the querystd op will detect the standard. Since the design of the adv7180 requires that you switch to a special autodetect mode you cannot call querystd when you are streaming. So the s_stream op has been added so we know whether we are streaming or not, and if we are, then querystd returns EBUSY. After testing this with a signal generator is became obvious that a sleep is needed between changing the standard to autodetect and reading the status. So the autodetect can never have worked well. The s_std call now just sets the new standard without any querying. If the driver supports the interrupt, then when it detects a standard change it will signal that by sending the V4L2_EVENT_SOURCE_CHANGE event. With these changes this driver now behaves like all other video receivers. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Federico Vaga <federico.vaga@gmail.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-20[media] adv7180: Add g_tvnorms operationNiklas Söderlund1-1/+7
The ADV7180 supports NTSC, PAL and SECAM. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-20[media] adv7180: Add cropcap operationNiklas Söderlund1-0/+16
Add support to get the pixel aspect ratio depending on the current standard (50 vs 60 Hz). Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-04-20[media] adv7180: Add g_std operationNiklas Söderlund1-0/+10
Add support to get the standard to the adv7180 driver. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11[media] media framework: rename pads init function to media_entity_pads_init()Mauro Carvalho Chehab1-1/+1
With the MC next gen rework, what's left for media_entity_init() is to just initialize the PADs. However, certain devices, like a FLASH led/light doesn't have any input or output PAD. So, there's no reason why calling media_entity_init() would be mandatory. Also, despite its name, what this function actually does is to initialize the PADs data. So, rename it to media_entity_pads_init() in order to reflect that. The media entity actual init happens during entity register, at media_device_register_entity(). We should move init of num_links and num_backlinks to it. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11[media] uapi/media.h: Rename entities types to functionsMauro Carvalho Chehab1-1/+1
Rename the userspace types from MEDIA_ENT_T_ to MEDIA_ENT_F_ and add the backward compatibility bits. The changes at the .c files was generated by the following coccinelle script: @@ @@ -MEDIA_ENT_T_UNKNOWN +MEDIA_ENT_F_UNKNOWN @@ @@ -MEDIA_ENT_T_DVB_BASE +MEDIA_ENT_F_DVB_BASE @@ @@ -MEDIA_ENT_T_V4L2_BASE +MEDIA_ENT_F_V4L2_BASE @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_BASE +MEDIA_ENT_F_V4L2_SUBDEV_BASE @@ @@ -MEDIA_ENT_T_CONNECTOR_BASE +MEDIA_ENT_F_CONNECTOR_BASE @@ @@ -MEDIA_ENT_T_V4L2_VIDEO +MEDIA_ENT_F_IO_V4L @@ @@ -MEDIA_ENT_T_V4L2_VBI +MEDIA_ENT_F_IO_VBI @@ @@ -MEDIA_ENT_T_V4L2_SWRADIO +MEDIA_ENT_F_IO_SWRADIO @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN +MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN @@ @@ -MEDIA_ENT_T_CONN_RF +MEDIA_ENT_F_CONN_RF @@ @@ -MEDIA_ENT_T_CONN_SVIDEO +MEDIA_ENT_F_CONN_SVIDEO @@ @@ -MEDIA_ENT_T_CONN_COMPOSITE +MEDIA_ENT_F_CONN_COMPOSITE @@ @@ -MEDIA_ENT_T_CONN_TEST +MEDIA_ENT_F_CONN_TEST @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_SENSOR +MEDIA_ENT_F_CAM_SENSOR @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_FLASH +MEDIA_ENT_F_FLASH @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_LENS +MEDIA_ENT_F_LENS @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_DECODER +MEDIA_ENT_F_ATV_DECODER @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_TUNER +MEDIA_ENT_F_TUNER @@ @@ -MEDIA_ENT_T_DVB_DEMOD +MEDIA_ENT_F_DTV_DEMOD @@ @@ -MEDIA_ENT_T_DVB_DEMUX +MEDIA_ENT_F_TS_DEMUX @@ @@ -MEDIA_ENT_T_DVB_TSOUT +MEDIA_ENT_F_IO_DTV @@ @@ -MEDIA_ENT_T_DVB_CA +MEDIA_ENT_F_DTV_CA @@ @@ -MEDIA_ENT_T_DVB_NET_DECAP +MEDIA_ENT_F_DTV_NET_DECAP Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11[media] media: get rid of unused "extra_links" param on media_entity_init()Mauro Carvalho Chehab1-1/+1
Currently, media_entity_init() creates an array with the links, allocated at init time. It provides a parameter (extra_links) that would allocate more links than the current needs, but this is not used by any driver. As we want to be able to do dynamic link allocation/removal, we'll need to change the implementation of the links. So, before doing that, let's first remove that extra unused parameter, in order to cleanup the interface first. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-17[media] media: adv7180: increase delay after reset to 5msUlrich Hecht1-1/+1
Initialization of the ADV7180 chip fails on the Renesas R8A7790-based Lager board about 50% of the time. This patch resolves the issue by increasing the minimum delay after reset from 2 ms to 5 ms, following the recommendation in the ADV7180 datasheet: "Executing a software reset takes approximately 2 ms. However, it is recommended to wait 5 ms before any further I2C writes are performed." Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] i2c: Drop owner assignment from i2c_driverKrzysztof Kozlowski1-1/+0
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-06[media] media: adv7180: add of match tableBen Dooks1-0/+11
Add a proper of match id for use when the device is being bound via device tree, to avoid having to use the i2c old-style binding of the device. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: William.Towle <william.towle@codethink.co.uk> Reviewed-by: Rob Taylor <rob.taylor@codethink.co.uk> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-23[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_configHans Verkuil1-5/+5
If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] adv7180: Add fast switch supportLars-Peter Clausen1-0/+29
In fast switch mode the adv7180 (and similar) can lock onto a new signal faster when switching between different inputs. As a downside though it is no longer able to auto-detect the incoming format. The fast switch mode is exposed as a boolean v4l control that allows userspace applications to either enable or disable fast switch mode. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Federico Vaga <federico.vaga@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] adv7180: Add I2P supportLars-Peter Clausen1-8/+148
Some of the devices supported by this driver have a interlaced-to- progressive converter which can optionally be enabled. This patch adds support for enabling and disabling the I2P converter on such devices. I2P mode can be enabled by selecting V4L2_FIELD_NONE instead of V4L2_FIELD_INTERLACED for the format. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Federico Vaga <federico.vaga@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] adv7180: Add support for the adv7280-m/adv7281-m/adv7281-ma/adv7282-mLars-Peter Clausen1-16/+154
This patch adds support for the adv7280-m/adv2781-m/adv7281-ma/adv7282-m devices to the adv7180 driver. They are very similar to the adv7280/adv7281/adv7282 but instead of parallel video out they feature a MIPI CSI2 transmitter. The CSI2 transmitter is configured via a separate I2C address, so we need to register a dummy device for it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Federico Vaga <federico.vaga@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] adv7180: Add support for the adv7280/adv7281/adv7282Lars-Peter Clausen1-2/+54
This patch adds support for the adv7280/adv7281/adv7282 devices to the adv7180 driver. They are very similar to the adv7182, the main difference from the drivers point of view are some different tuning constants for improved video performance. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Federico Vaga <federico.vaga@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] adv7180: Add support for the adv7182Lars-Peter Clausen1-0/+149
This patch adds support for the adv7182 to the adv7180 driver. The adv7182 is similar to the adv7180, the main difference from the driver's point of view is how the video input and how the input format are selected. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Federico Vaga <federico.vaga@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-03 19:25:04 +0000