summaryrefslogtreecommitdiffstats
path: root/drivers/md/bcache/super.c
AgeCommit message (Collapse)AuthorFilesLines
2022-07-14md/bcache: Combine two prio_io() argumentsBart Van Assche1-5/+4
Improve uniformity in the kernel of handling of request operation and flags by passing these as a single argument. Cc: Coly Li <colyli@suse.de> Cc: Mingzhe Zou <mingzhe.zou@easystack.cn> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-34-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14md/bcache: Combine two uuid_io() argumentsBart Van Assche1-8/+8
Improve uniformity in the kernel of handling of request operation and flags by passing these as a single argument. Cc: Coly Li <colyli@suse.de> Cc: Mingzhe Zou <mingzhe.zou@easystack.cn> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-33-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-28block: remove blk_cleanup_diskChristoph Hellwig1-1/+1
blk_cleanup_disk is nothing but a trivial wrapper for put_disk now, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-24bcache: avoid journal no-space deadlock by reserving 1 journal bucketColy Li1-0/+1
The journal no-space deadlock was reported time to time. Such deadlock can happen in the following situation. When all journal buckets are fully filled by active jset with heavy write I/O load, the cache set registration (after a reboot) will load all active jsets and inserting them into the btree again (which is called journal replay). If a journaled bkey is inserted into a btree node and results btree node split, new journal request might be triggered. For example, the btree grows one more level after the node split, then the root node record in cache device super block will be upgrade by bch_journal_meta() from bch_btree_set_root(). But there is no space in journal buckets, the journal replay has to wait for new journal bucket to be reclaimed after at least one journal bucket replayed. This is one example that how the journal no-space deadlock happens. The solution to avoid the deadlock is to reserve 1 journal bucket in run time, and only permit the reserved journal bucket to be used during cache set registration procedure for things like journal replay. Then the journal space will never be fully filled, there is no chance for journal no-space deadlock to happen anymore. This patch adds a new member "bool do_reserve" in struct journal, it is inititalized to 0 (false) when struct journal is allocated, and set to 1 (true) by bch_journal_space_reserve() when all initialization done in run_cache_set(). In the run time when journal_reclaim() tries to allocate a new journal bucket, free_journal_buckets() is called to check whether there are enough free journal buckets to use. If there is only 1 free journal bucket and journal->do_reserve is 1 (true), the last bucket is reserved and free_journal_buckets() will return 0 to indicate no free journal bucket. Then journal_reclaim() will give up, and try next time to see whetheer there is free journal bucket to allocate. By this method, there is always 1 jouranl bucket reserved in run time. During the cache set registration, journal->do_reserve is 0 (false), so the reserved journal bucket can be used to avoid the no-space deadlock. Reported-by: Nikhil Kshirsagar <nkshirsagar@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220524102336.10684-5-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-17block: remove QUEUE_FLAG_DISCARDChristoph Hellwig1-2/+1
Just use a non-zero max_discard_sectors as an indicator for discard support, similar to what is done for write zeroes. The only places where needs special attention is the RAID5 driver, which must clear discard support for security reasons by default, even if the default stacking rules would allow for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd] Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390] Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: David Sterba <dsterba@suse.com> [btrfs] Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02block: pass a block_device and opf to bio_initChristoph Hellwig1-5/+3
Pass the block_device that we plan to use this bio for and the operation to bio_init to optimize the assignment. A NULL block_device can be passed, both for the passthrough case on a raw request_queue and to temporarily avoid refactoring some nasty code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220124091107.642561-19-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02block: remove genhd.hChristoph Hellwig1-1/+0
There is no good reason to keep genhd.h separate from the main blkdev.h header that includes it. So fold the contents of genhd.h into blkdev.h and remove genhd.h entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-14bcache: fix NULL pointer reference in cached_dev_detach_finishLin Feng1-1/+2
Commit 0259d4498ba4 ("bcache: move calc_cached_dev_sectors to proper place on backing device detach") tries to fix calc_cached_dev_sectors when bcache device detaches, but now we have: cached_dev_detach_finish ... bcache_device_detach(&dc->disk); ... closure_put(&d->c->caching); d->c = NULL; [*explicitly set dc->disk.c to NULL*] list_move(&dc->list, &uncached_devices); calc_cached_dev_sectors(dc->disk.c); [*passing a NULL pointer*] ... Upper codeflows shows how bug happens, this patch fix the problem by caching dc->disk.c beforehand, and cache_set won't be freed under us because c->caching closure at least holds a reference count and closure callback __cache_set_unregister only being called by bch_cache_set_stop which using closure_queue(&c->caching), that means c->caching closure callback for destroying cache_set won't be trigger by previous closure_put(&d->c->caching). So at this stage(while cached_dev_detach_finish is calling) it's safe to access cache_set dc->disk.c. Fixes: 0259d4498ba4 ("bcache: move calc_cached_dev_sectors to proper place on backing device detach") Signed-off-by: Lin Feng <linf@wangsu.com> Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20211112053629.3437-2-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-09Merge tag 'for-5.16/drivers-2021-11-09' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull more block driver updates from Jens Axboe: - Last series adding error handling support for add_disk() in drivers. After this one, and once the SCSI side has been merged, we can finally annotate add_disk() as must_check. (Luis) - bcache fixes (Coly) - zram fixes (Ming) - ataflop locking fix (Tetsuo) - nbd fixes (Ye, Yu) - MD merge via Song - Cleanup (Yang) - sysfs fix (Guoqing) - Misc fixes (Geert, Wu, luo) * tag 'for-5.16/drivers-2021-11-09' of git://git.kernel.dk/linux-block: (34 commits) bcache: Revert "bcache: use bvec_virt" ataflop: Add missing semicolon to return statement floppy: address add_disk() error handling on probe ataflop: address add_disk() error handling on probe block: update __register_blkdev() probe documentation ataflop: remove ataflop_probe_lock mutex mtd/ubi/block: add error handling support for add_disk() block/sunvdc: add error handling support for add_disk() z2ram: add error handling support for add_disk() nvdimm/pmem: use add_disk() error handling nvdimm/pmem: cleanup the disk if pmem_release_disk() is yet assigned nvdimm/blk: add error handling support for add_disk() nvdimm/blk: avoid calling del_gendisk() on early failures nvdimm/btt: add error handling support for add_disk() nvdimm/btt: use goto error labels on btt_blk_init() loop: Remove duplicate assignments drbd: Fix double free problem in drbd_create_device nvdimm/btt: do not call del_gendisk() if not needed bcache: fix use-after-free problem in bcache_device_free() zram: replace fsync_bdev with sync_blockdev ...
2021-11-03bcache: fix use-after-free problem in bcache_device_free()Coly Li1-1/+1
In bcache_device_free(), pointer disk is referenced still in ida_simple_remove() after blk_cleanup_disk() gets called on this pointer. This may cause a potential panic by use-after-free on the disk pointer. This patch fixes the problem by calling blk_cleanup_disk() after ida_simple_remove(). Fixes: bc70852fd104 ("bcache: convert to blk_alloc_disk/blk_cleanup_disk") Signed-off-by: Coly Li <colyli@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: stable@vger.kernel.org # v5.14+ Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211103064917.67383-1-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-01Merge tag 'for-5.16/bdev-size-2021-10-29' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull bdev size cleanups from Jens Axboe: "Clean up the bdev size handling with new bdev_nr_bytes() helper" * tag 'for-5.16/bdev-size-2021-10-29' of git://git.kernel.dk/linux-block: (34 commits) partitions/ibm: use bdev_nr_sectors instead of open coding it partitions/efi: use bdev_nr_bytes instead of open coding it block/ioctl: use bdev_nr_sectors and bdev_nr_bytes block: cache inode size in bdev udf: use sb_bdev_nr_blocks reiserfs: use sb_bdev_nr_blocks ntfs: use sb_bdev_nr_blocks jfs: use sb_bdev_nr_blocks ext4: use sb_bdev_nr_blocks block: add a sb_bdev_nr_blocks helper block: use bdev_nr_bytes instead of open coding it in blkdev_fallocate squashfs: use bdev_nr_bytes instead of open coding it reiserfs: use bdev_nr_bytes instead of open coding it pstore/blk: use bdev_nr_bytes instead of open coding it ntfs3: use bdev_nr_bytes instead of open coding it nilfs2: use bdev_nr_bytes instead of open coding it nfs/blocklayout: use bdev_nr_bytes instead of open coding it jfs: use bdev_nr_bytes instead of open coding it hfsplus: use bdev_nr_sectors instead of open coding it hfs: use bdev_nr_sectors instead of open coding it ...
2021-10-21bcache: add error handling support for add_disk()Luis Chamberlain1-5/+12
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. This driver doesn't do any unwinding with blk_cleanup_disk() even on errors after add_disk() and so we follow that tradition. Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211015233028.2167651-5-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20bcache: remove the backing_dev_name field from struct cached_devChristoph Hellwig1-28/+20
Just use the %pg format specifier to print the name directly. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20211020143812.6403-7-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20bcache: remove the cache_dev_name field from struct cacheChristoph Hellwig1-4/+3
Just use the %pg format specifier to print the name directly. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20211020143812.6403-6-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20bcache: move calc_cached_dev_sectors to proper place on backing device detachLin Feng1-1/+1
Calculation of cache_set's cached sectors is done by travelling cached_devs list as shown below: static void calc_cached_dev_sectors(struct cache_set *c) { ... list_for_each_entry(dc, &c->cached_devs, list) sectors += bdev_sectors(dc->bdev); c->cached_dev_sectors = sectors; } But cached_dev won't be unlinked from c->cached_devs list until we call following list_move(&dc->list, &uncached_devices), so previous fix in 'commit 46010141da6677b81cc77f9b47f8ac62bd1cbfd3 ("bcache: recal cached_dev_sectors on detach")' is wrong, now we move it to its right place. Signed-off-by: Lin Feng <linf@wangsu.com> Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20211020143812.6403-5-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20bcache: fix error info in register_bcache()Chao Yu1-3/+10
In register_bcache(), there are several cases we didn't set correct error info (return value and/or error message): - if kzalloc() fails, it needs to return ENOMEM and print "cannot allocate memory"; - if register_cache() fails, it's better to propagate its return value rather than using default EINVAL. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20211020143812.6403-4-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20md: bcache: Fix spelling of 'acquire'Ding Senjie1-1/+1
acqurie -> acquire Signed-off-by: Ding Senjie <dingsenjie@yulong.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20211020143812.6403-2-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18bcache: remove bdev_sectorsChristoph Hellwig1-1/+1
Use the equivalent block layer helper instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Acked-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20211018101130.1838532-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-12bcache: move the del_gendisk call out of bcache_device_freeChristoph Hellwig1-6/+4
Let the callers call del_gendisk so that we can check if add_disk has been called properly for the cached device case instead of relying on the block layer internal GENHD_FL_UP flag. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20210809064028.1198327-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-12bcache: add proper error unwinding in bcache_device_initChristoph Hellwig1-5/+11
Except for the IDA none of the allocations in bcache_device_init is unwound on error, fix that. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20210809064028.1198327-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-01bcache: convert to blk_alloc_disk/blk_cleanup_diskChristoph Hellwig1-11/+4
Convert the bcache driver to use the blk_alloc_disk and blk_cleanup_disk helpers to simplify gendisk and request_queue allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Coly Li <colyli@suse.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210521055116.1053587-13-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-06include: remove pagemap.h from blkdev.hMatthew Wilcox (Oracle)1-0/+1
My UEK-derived config has 1030 files depending on pagemap.h before this change. Afterwards, just 326 files need to be rebuilt when I touch pagemap.h. I think blkdev.h is probably included too widely, but untangling that dependency is harder and this solves my problem. x86 allmodconfig builds, but there may be implicit include problems on other architectures. Link: https://lkml.kernel.org/r/20210309195747.283796-1-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Dan Williams <dan.j.williams@intel.com> [nvdimm] Acked-by: Jens Axboe <axboe@kernel.dk> [block] Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: Martin K. Petersen <martin.petersen@oracle.com> [scsi] Reviewed-by: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-11bcache: reduce redundant code in bch_cached_dev_run()Zhiqiang Liu1-13/+12
In bch_cached_dev_run(), free(env[1])|free(env[2])|free(buf) show up three times. This patch introduce out tag in which free(env[1])|free(env[2])|free(buf) are only called one time. If we need to call free() when errors occur, we can set error code to ret, and then goto out tag directly. Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20210411134316.80274-2-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-11block: rename BIO_MAX_PAGES to BIO_MAX_VECSChristoph Hellwig1-1/+1
Ever since the addition of multipage bio_vecs BIO_MAX_PAGES has been horribly confusingly misnamed. Rename it to BIO_MAX_VECS to stop confusing users of the bio API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20210311110137.1132391-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-10bcache: Move journal work to new flush wqKai Krakow1-0/+16
This is potentially long running and not latency sensitive, let's get it out of the way of other latency sensitive events. As observed in the previous commit, the `system_wq` comes easily congested by bcache, and this fixes a few more stalls I was observing every once in a while. Let's not make this `WQ_MEM_RECLAIM` as it showed to reduce performance of boot and file system operations in my tests. Also, without `WQ_MEM_RECLAIM`, I no longer see desktop stalls. This matches the previous behavior as `system_wq` also does no memory reclaim: > // workqueue.c: > system_wq = alloc_workqueue("events", 0, 0); Cc: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org # 5.4+ Signed-off-by: Kai Krakow <kai@kaishome.de> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-10Revert "bcache: Kill btree_io_wq"Kai Krakow1-0/+4
This reverts commit 56b30770b27d54d68ad51eccc6d888282b568cee. With the btree using the `system_wq`, I seem to see a lot more desktop latency than I should. After some more investigation, it looks like the original assumption of 56b3077 no longer is true, and bcache has a very high potential of congesting the `system_wq`. In turn, this introduces laggy desktop performance, IO stalls (at least with btrfs), and input events may be delayed. So let's revert this. It's important to note that the semantics of using `system_wq` previously mean that `btree_io_wq` should be created before and destroyed after other bcache wqs to keep the same assumptions. Cc: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org # 5.4+ Signed-off-by: Kai Krakow <kai@kaishome.de> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-10bcache: Fix register_device_aync typoKai Krakow1-2/+2
Should be `register_device_async`. Cc: Coly Li <colyli@suse.de> Signed-off-by: Kai Krakow <kai@kaishome.de> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-24bcache: don't pass BIOSET_NEED_BVECS for the 'bio_set' embedded in 'cache_set'Ming Lei1-1/+1
This bioset is just for allocating bio only from bio_next_split, and it needn't bvecs, so remove the flag. Cc: linux-bcache@vger.kernel.org Cc: Coly Li <colyli@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Acked-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-09bcache: set bcache device into read-only mode for ↵Coly Li1-0/+15
BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET If BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET is set in incompat feature set, it means the cache device is created with obsoleted layout with obso_bucket_site_hi. Now bcache does not support this feature bit, a new BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE incompat feature bit is added for a better layout to support large bucket size. For the legacy compatibility purpose, if a cache device created with obsoleted BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit, all bcache devices attached to this cache set should be set to read-only. Then the dirty data can be written back to backing device before re-create the cache device with BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE feature bit by the latest bcache-tools. This patch checks BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit when running a cache set and attach a bcache device to the cache set. If this bit is set, - When run a cache set, print an error kernel message to indicate all following attached bcache device will be read-only. - When attach a bcache device, print an error kernel message to indicate the attached bcache device will be read-only, and ask users to update to latest bcache-tools. Such change is only for cache device whose bucket size >= 32MB, this is for the zoned SSD and almost nobody uses such large bucket size at this moment. If you don't explicit set a large bucket size for a zoned SSD, such change is totally transparent to your bcache device. Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-09bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucketColy Li1-3/+19
When large bucket feature was added, BCH_FEATURE_INCOMPAT_LARGE_BUCKET was introduced into the incompat feature set. It used bucket_size_hi (which was added at the tail of struct cache_sb_disk) to extend current 16bit bucket size to 32bit with existing bucket_size in struct cache_sb_disk. This is not a good idea, there are two obvious problems, - Bucket size is always value power of 2, if store log2(bucket size) in existing bucket_size of struct cache_sb_disk, it is unnecessary to add bucket_size_hi. - Macro csum_set() assumes d[SB_JOURNAL_BUCKETS] is the last member in struct cache_sb_disk, bucket_size_hi was added after d[] which makes csum_set calculate an unexpected super block checksum. To fix the above problems, this patch introduces a new incompat feature bit BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE, when this bit is set, it means bucket_size in struct cache_sb_disk stores the order of power-of-2 bucket size value. When user specifies a bucket size larger than 32768 sectors, BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE will be set to incompat feature set, and bucket_size stores log2(bucket size) more than store the real bucket size value. The obsoleted BCH_FEATURE_INCOMPAT_LARGE_BUCKET won't be used anymore, it is renamed to BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET and still only recognized by kernel driver for legacy compatible purpose. The previous bucket_size_hi is renmaed to obso_bucket_size_hi in struct cache_sb_disk and not used in bcache-tools anymore. For cache device created with BCH_FEATURE_INCOMPAT_LARGE_BUCKET feature, bcache-tools and kernel driver still recognize the feature string and display it as "obso_large_bucket". With this change, the unnecessary extra space extend of bcache on-disk super block can be avoided, and csum_set() may generate expected check sum as well. Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-09bcache: check unsupported feature sets for bcache registerColy Li1-0/+14
This patch adds the check for features which is incompatible for current supported feature sets. Now if the bcache device created by bcache-tools has features that current kernel doesn't support, read_super() will fail with error messoage. E.g. if an unsupported incompatible feature detected, bcache register will fail with dmesg "bcache: register_bcache() error : Unsupported incompatible feature found". Fixes: d721a43ff69c ("bcache: increase super block version for cache device and backing device") Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-09bcache: set pdev_set_uuid before scond loop iterationYi Li1-1/+1
There is no need to reassign pdev_set_uuid in the second loop iteration, so move it to the place before second loop. Signed-off-by: Yi Li <yili@winhong.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-23bcache:remove a superfluous check in register_bcacheYi Li1-2/+0
There have no reassign the bdev after check It is IS_ERR. the double check !IS_ERR(bdev) is superfluous. After commit 4e7b5671c6a8 ("block: remove i_bdev"), "Switch the block device lookup interfaces to directly work with a dev_t so that struct block_device references are only acquired by the blkdev_get variants (and the blk-cgroup special case). This means that we now don't need an extra reference in the inode and can generally simplify handling of struct block_device to keep the lookups contained in the core block layer code." so after lookup_bdev call, there no need to do bdput. remove a superfluous check the bdev & don't call bdput after lookup_bdev. Fixes: 4e7b5671c6a8("block: remove i_bdev") Signed-off-by: Yi Li <yili@winhong.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-16Merge tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-blockLinus Torvalds1-9/+0
Pull block driver updates from Jens Axboe: "Nothing major in here: - NVMe pull request from Christoph: - nvmet passthrough improvements (Chaitanya Kulkarni) - fcloop error injection support (James Smart) - read-only support for zoned namespaces without Zone Append (Javier González) - improve some error message (Minwoo Im) - reject I/O to offline fabrics namespaces (Victor Gladkov) - PCI queue allocation cleanups (Niklas Schnelle) - remove an unused allocation in nvmet (Amit Engel) - a Kconfig spelling fix (Colin Ian King) - nvme_req_qid simplication (Baolin Wang) - MD pull request from Song: - Fix race condition in md_ioctl() (Dae R. Jeong) - Initialize read_slot properly for raid10 (Kevin Vigor) - Code cleanup (Pankaj Gupta) - md-cluster resync/reshape fix (Zhao Heming) - Move null_blk into its own directory (Damien Le Moal) - null_blk zone and discard improvements (Damien Le Moal) - bcache race fix (Dongsheng Yang) - Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang, Lutz Pogrell, Md Haris Iqbal) - lightnvm NULL pointer deref fix (tangzhenhao) - sr in_interrupt() removal (Sebastian Andrzej Siewior) - FC endpoint security support for s390/dasd (Jan Höppner, Sebastian Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included as it made it easier for them to funnel the feature through the block driver tree. - Follow up fixes (Colin Ian King)" * tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits) block: drop dead assignments in loop_init() sr: Remove in_interrupt() usage in sr_init_command(). sr: Switch the sector size back to 2048 if sr_read_sector() changed it. cdrom: Reset sector_size back it is not 2048. drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c null_blk: Move driver into its own directory null_blk: Allow controlling max_hw_sectors limit null_blk: discard zones on reset null_blk: cleanup discard handling null_blk: Improve implicit zone close null_blk: improve zone locking block: Align max_hw_sectors to logical blocksize null_blk: Fail zone append to conventional zones null_blk: Fix zone size initialization bcache: fix race between setting bdev state to none and new write request direct to backing block/rnbd: fix a null pointer dereference on dev->blk_symlink_name block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name block/rnbd: call kobject_put in the failure path Documentation/ABI/rnbd-srv: add document for force_close block/rnbd-srv: close a mapped device from server side. ...
2020-12-07bcache: fix race between setting bdev state to none and new write request ↵Dongsheng Yang1-9/+0
direct to backing There is a race condition in detaching as below: A. detaching B. Write request (1) writing back (2) write back done, set bdev state to clean. (3) cached_dev_put() and schedule_work(&dc->detach); (4) write data [0 - 4K] directly into backing and ack to user. (5) power-failure... When we restart this bcache device, this bdev is clean but not detached, and read [0 - 4K], we will get unexpected old data from cache device. To fix this problem, set the bdev state to none when we writeback done in detaching, and then if power-failure happened as above, the data in cache will not be used in next bcache device starting, it's detached, we will read the correct data from backing derectly. Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: remove the nr_sects field in struct hd_structChristoph Hellwig1-1/+1
Now that the hd_struct always has a block device attached to it, there is no need for having two size field that just get out of sync. Additionally the field in hd_struct did not use proper serialization, possibly allowing for torn writes. By only using the block_device field this problem also gets fixed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: remove i_bdevChristoph Hellwig1-9/+11
Switch the block device lookup interfaces to directly work with a dev_t so that struct block_device references are only acquired by the blkdev_get variants (and the blk-cgroup special case). This means that we now don't need an extra reference in the inode and can generally simplify handling of struct block_device to keep the lookups contained in the core block layer code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Coly Li <colyli@suse.de> [bcache] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: add a bdev_kobj helperChristoph Hellwig1-5/+2
Add a little helper to find the kobject for a struct block_device. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: David Sterba <dsterba@suse.com> [btrfs] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-02bcache: remove embedded struct cache_sb from struct cache_setColy Li1-30/+17
Since bcache code was merged into mainline kerrnel, each cache set only as one single cache in it. The multiple caches framework is here but the code is far from completed. Considering the multiple copies of cached data can also be stored on e.g. md raid1 devices, it is unnecessary to support multiple caches in one cache set indeed. The previous preparation patches fix the dependencies of explicitly making a cache set only have single cache. Now we don't have to maintain an embedded partial super block in struct cache_set, the in-memory super block can be directly referenced from struct cache. This patch removes the embedded struct cache_sb from struct cache_set, and fixes all locations where the superb lock was referenced from this removed super block by referencing the in-memory super block of struct cache. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-02bcache: check and set sync status on cache's in-memory super blockColy Li1-5/+2
Currently the cache's sync status is checked and set on cache set's in- memory partial super block. After removing the embedded struct cache_sb from cache set and reference cache's in-memory super block from struct cache_set, the sync status can set and check directly on cache's super block. This patch checks and sets the cache sync status directly on cache's in-memory super block. This is a preparation for later removing embedded struct cache_sb from struct cache_set. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-02bcache: remove can_attach_cache()Coly Li1-10/+0
After removing the embedded struct cache_sb from struct cache_set, cache set will directly reference the in-memory super block of struct cache. It is unnecessary to compare block_size, bucket_size and nr_in_set from the identical in-memory super block in can_attach_cache(). This is a preparation patch for latter removing cache_set->sb from struct cache_set. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-02bcache: don't check seq numbers in register_cache_set()Coly Li1-15/+0
In order to update the partial super block of cache set, the seq numbers of cache and cache set are checked in register_cache_set(). If cache's seq number is larger than cache set's seq number, cache set must update its partial super block from cache's super block. It is unncessary when the embedded struct cache_sb is removed from struct cache set. This patch removed the seq numbers checking from register_cache_set(), because later there will be no such partial super block in struct cache set, the cache set will directly reference in-memory super block from struct cache. This is a preparation patch for removing embedded struct cache_sb from struct cache_set. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-02bcache: remove useless alloc_bucket_pages()Coly Li1-3/+0
Now no one uses alloc_bucket_pages() anymore, remove it from bcache.h. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-02bcache: only use block_bytes() on struct cacheColy Li1-1/+1
Because struct cache_set and struct cache both have struct cache_sb, therefore macro block_bytes() can be used on both of them. When removing the embedded struct cache_sb from struct cache_set, this macro won't be used on struct cache_set anymore. This patch unifies all block_bytes() usage only on struct cache, this is one of the preparation to remove the embedded struct cache_sb from struct cache_set. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-02bcache: add set_uuid in struct cache_setColy Li1-12/+12
This patch adds a separated set_uuid[16] in struct cache_set, to store the uuid of the cache set. This is the preparation to remove the embedded struct cache_sb from struct cache_set. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-02bcache: remove for_each_cache()Coly Li1-67/+48
Since now each cache_set explicitly has single cache, for_each_cache() is unnecessary. This patch removes this macro, and update all locations where it is used, and makes sure all code logic still being consistent. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-02bcache: explicitly make cache_set only have single cacheColy Li1-11/+8
Currently although the bcache code has a framework for multiple caches in a cache set, but indeed the multiple caches never completed and users use md raid1 for multiple copies of the cached data. This patch does the following change in struct cache_set, to explicitly make a cache_set only have single cache, - Change pointer array "*cache[MAX_CACHES_PER_SET]" to a single pointer "*cache". - Remove pointer array "*cache_by_alloc[MAX_CACHES_PER_SET]". - Remove "caches_loaded". Now the code looks as exactly what it does in practic: only one cache is used in the cache set. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-02bcache: remove 'int n' from parameter list of bch_bucket_alloc_set()Coly Li1-1/+1
The parameter 'int n' from bch_bucket_alloc_set() is not cleared defined. From the code comments n is the number of buckets to alloc, but from the code itself 'n' is the maximum cache to iterate. Indeed all the locations where bch_bucket_alloc_set() is called, 'n' is alwasy 1. This patch removes the confused and unnecessary 'int n' from parameter list of bch_bucket_alloc_set(), and explicitly allocates only 1 bucket for its caller. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-02bcache: share register sysfs with async registerColy Li1-5/+7
Previously the experimental async registration uses a separate sysfs file register_async. Now the async registration code seems working well for a while, we can do furtuher testing with it now. This patch changes the async bcache registration shares the same sysfs file /sys/fs/bcache/register (and register_quiet). Async registration will be default behavior if BCACHE_ASYNC_REGISTRATION is set in kernel configure. By default, BCACHE_ASYNC_REGISTRATION is not configured yet. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24block: lift setting the readahead size into the block layerChristoph Hellwig1-3/+0
Drivers shouldn't really mess with the readahead size, as that is a VM concept. Instead set it based on the optimal I/O size by lifting the algorithm from the md driver when registering the disk. Also set bdi->io_pages there as well by applying the same scheme based on max_sectors. To ensure the limits work well for stacking drivers a new helper is added to update the readahead limits from the block limits, which is also called from disk_stack_limits. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-12 06:34:58 +0000