summaryrefslogtreecommitdiffstats
path: root/drivers/iio/potentiostat
AgeCommit message (Collapse)AuthorFilesLines
2022-11-23iio: potentiostat: lmp91000: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-165-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-16i2c: Make remove callback return voidUwe Kleine-König1-3/+1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-11-17iio: lmp91000: Remove no-op trigger opsLars-Peter Clausen1-4/+0
The IIO core handles a trigger ops with all NULL callbacks the same as if the trigger ops itself was NULL. Remove the empty trigger ops from the interrupt trigger driver to slightly reduce the boilerplate code. Object size of the driver module is also slightly reduced. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211031142130.20791-9-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-17iio: potentiostat: lmp91000: Fix alignment of buffer in ↵Jonathan Cameron1-2/+2
iio_push_to_buffers_with_timestamp() Add __aligned(8) to ensure the buffer passed to iio_push_to_buffers_with_timestamp() is suitable for the naturally aligned timestamp that will be inserted. Here structure is not used, because this buffer is also used elsewhere in the driver. Fixes: 67e17300dc1d ("iio: potentiostat: add LMP91000 support") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Matt Ranostay <matt.ranostay@konsulko.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20210501171352.512953-8-jic23@kernel.org
2021-05-17iio: core: move @id from struct iio_dev to struct iio_dev_opaqueJonathan Cameron1-1/+2
Continuing from Alexandru Ardelean's introduction of the split between driver modifiable fields and those that should only be set by the core. This could have been done in two steps to make the actual move after introducing iio_device_id() but there seemed limited point to that given how mechanical the majority of the patch is. Includes fixup from Alex for missing mxs-lradc-adc conversion. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20210426174911.397061-2-jic23@kernel.org
2021-03-25iio: lmp91000: Remove code to set trigger parentGwendal Grignou1-2/+1
iio_trigger_set_drvdata() sets the trigger device parent to first argument of viio_trigger_alloc(), no need to do it again in the driver code. Given data->dev is dev, and we call devm_iio_trigger_alloc with dev instead of data->dev, we do not have to set data->trig->dev.parent to dev anymore. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20210309193620.2176163-6-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-21iio:potentiostat:lmp91000: Drop of_match_ptr and use generic fw accessorsJonathan Cameron1-6/+5
This change allows use of this driver with ACPI via PRP0001 and removes an example of an anti pattern I'm trying to remove from IIO. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20200910173242.621168-17-jic23@kernel.org
2020-06-20iio: Move attach/detach of the poll func to the coreLars-Peter Clausen1-11/+2
All devices using a triggered buffer need to attach and detach the trigger to the device in order to properly work. Instead of doing this in each and every driver by hand move this into the core. At this point in time, all drivers should have been resolved to attach/detach the poll-function in the same order. This patch removes all explicit calls of iio_triggered_buffer_postenable() & iio_triggered_buffer_predisable() in all drivers, since the core handles now the pollfunc attach/detach. The more peculiar change is for the 'at91-sama5d2_adc' driver, since it's not immediately obvious that removing the hooks doesn't break anything. Eugen was able to test on at91-sama5d2-adc driver, sama5d2-xplained board. All seems to be fine. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Tested-by: Eugen Hristev <eugen.hristev@microchip.com> #for at91-sama5d2-adc Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-06-14iio: remove left-over parent assignmentsAlexandru Ardelean1-1/+0
These were found by doing some shell magic: ------------ for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do if grep 'parent =' $file | grep -v trig | grep -vq devm_; then echo "$file -> $(grep "parent =" $file)" fi done ----------- The output is bearable [after the semantic patch is applied]. There is a mix of trigger assignments with some iio device parent assignments that are removed via this patch. JC: A few more added via inspection of all parent = statements in drivers/iio. Some of these may just have crossed with this series, others were less obvious to scripting due to some cross file / module boundary calls. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: potentiostat: lmp9100: fix iio_triggered_buffer_{predisable,postenable} ↵Alexandru Ardelean1-5/+13
positions The iio_triggered_buffer_{predisable,postenable} functions attach/detach the poll functions. For the predisable hook, the disable code should occur before detaching the poll func, and for the postenable hook, the poll func should be attached before the enable code. The lmp9100 was attaching a poll function but never detaching it via any IIO disable hook. This change adds the detaching of the poll function, and moves/renames lmp91000_buffer_preenable() function to lmp91000_buffer_postenable(). The idea is to make it more symmetrical, so that when the iio_triggered_buffer_{predisable,postenable} functions get removed, it's easier to see. Fixes: 67e17300dc1d7 ("iio: potentiostat: add LMP91000 support") Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04iio:potentiostat:lmp91000: change dev_err messageAnderson Reis1-1/+1
Change dev_err message on line 215 in order to inform that tia-gain-ohm is not defined and an external resistor is not specified. Signed-off-by: Anderson Reis <andersonreisrosa@gmail.com> Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio:potentiostat:lmp91000: invert if statementAnderson Reis1-3/+2
Invert if statement arms in line 214, in order to make the code cleaner, solve these checkpatch.pl CHECKs: - lmp9100.c:214: CHECK: braces {} should be used on all arms of this statement - lmp9100.c:216: CHECK: Unbalanced braces around else statement Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com> Signed-off-by: Anderson Reis <andersonreisrosa@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio:potentiostat:lmp91000: reduce line width and remove blank lineAnderson Reis1-3/+2
Break the line 258 in order fit the line width on 80 characters. Remove the blank line 279, as the line before is also a blank line. Solve these checkpath.el WARNING and CHECK: - lmp91000.c:258: WARNING: line over 80 characters - lmp91000.c:279: CHECK: Please don't use multiple blank lines Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com> Signed-off-by: Anderson Reis <andersonreisrosa@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio:potentiostat:lmp91000: remove unnecessary parenthesesLucas Oshiro1-1/+1
Remove unnecessary parentheses on line 116. Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com> Signed-off-by: Anderson Reis <andersonreisrosa@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-05-12iio: potentiostat: lmp91000: add LMP91002 supportMatt Ranostay1-0/+2
LMP91002 is register compatible so add devicetree and i2c client ids Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-18iio: add SPDX identifier for various driversMatt Ranostay1-12/+4
Add GPLv2+ SPDX identifier and update email for author's drivers. Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-22iio:potentiostat:lmp91000 drop assign iio_info.driver_module and ↵Jonathan Cameron1-2/+0
iio_trigger_ops.owner The equivalent of both of these are now done via macro magic when the relevant register calls are made. The actual structure elements will shortly go away. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2017-02-19iio: lmp91000: Set parent deviceLars-Peter Clausen1-0/+1
Initialize the parent of the IIO device to the device that registered it. This makes sure that the IIO device appears the right level in the device hierarchy. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-27iio: potentiostat: add LMP91000 supportMatt Ranostay3-0/+474
Add support for the LMP91000 potentiostat which is used for chemical sensing applications. Signed-off-by: Matt Ranostay <matt@ranostay.consulting> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 21:51:34 +0000