summaryrefslogtreecommitdiffstats
path: root/drivers/iio/common
AgeCommit message (Collapse)AuthorFilesLines
2022-11-23iio: Don't silently expect attribute typesMatti Vaittinen2-7/+7
The iio_triggered_buffer_setup_ext() and the devm_iio_kfifo_buffer_setup_ext() were changed by commit 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr") to silently expect that all attributes given in buffer_attrs array are device-attributes. This expectation was not forced by the API - and some drivers did register attributes created by IIO_CONST_ATTR(). When using IIO_CONST_ATTRs the added attribute "wrapping" does not copy the pointer to stored string constant and when the sysfs file is read the kernel will access to invalid location. Change the function signatures to expect an array of iio_dev_attrs to avoid similar errors in the future. Merge conflict resolved whilst applying due to patch crossing with two new drivers (kx022a accelerometer and ad4130 ADC). Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/63f54787a684eb1232f1c5d275a09c786987fe4a.1664782676.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: st_sensors: core and lsm9ds0 switch to devm_regulator_bulk_get_enable()Jonathan Cameron1-32/+7
These drivers only turns the power on at probe and off via a custom devm_add_action_or_reset() callback. The two regulators were handled separately so also switch to bulk registration. The new devm_regulator_bulk_get_enable() replaces all this boilerplate code. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-8-jic23@kernel.org
2022-11-23iio: common: scmi_iio: do not use internal iio_dev lockNuno Sá1-2/+7
The iio_device lock is only meant for internal use. Hence define a device local lock to protect against concurrent accesses. While at it, properly include "mutex.h" for mutex related APIs. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221004134909.1692021-12-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-28iio: common: scmi_sensors: use HZ macro from units.hDmitry Rokosov1-4/+4
Remove duplicated definition of UHZ_PER_HZ, because it's available in the units.h as MICROHZ_PER_HZ. Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220812165243.22177-5-ddrokosov@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-19iio: st_sensors: move from strlcpy with unused retval to strscpyWolfram Sang1-1/+1
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818210017.6817-1-wsa+renesas@sang-engineering.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-18iio: cros: Register FIFO callback after sensor is registeredGwendal Grignou3-21/+47
Instead of registering callback to process sensor events right at initialization time, wait for the sensor to be register in the iio subsystem. Events can come at probe time (in case the kernel rebooted abruptly without switching the sensor off for instance), and be sent to IIO core before the sensor is fully registered. Fixes: aa984f1ba4a4 ("iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO") Reported-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220711144716.642617-1-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-14iio: common: cros_ec_sensors: explicitly add proper header filesNuno Sá1-0/+1
Do not trust the fact that iio.h includes of.h which in turn includes all the headers we are relying on. The ultimate goal is to actually drop of.h from iio.h. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220610084545.547700-13-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-14iio: common: cros_ec_lid_angle: explicitly add proper header filesNuno Sá1-0/+1
Do not trust the fact that iio.h includes of.h which in turn includes all the headers we are relying on. The ultimate goal is to actually drop of.h from iio.h. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220610084545.547700-12-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-14iio: common: ssp: Fix alignment for DMA safetyJonathan Cameron1-2/+1
____cacheline_aligned is an insufficient guarantee for non-coherent DMA on platforms with 128 byte cachelines above L1. Switch to the updated IIO_DMA_MINALIGN definition. Fixes: 50dd64d57eee ("iio: common: ssp_sensors: Add sensorhub driver") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220508175712.647246-43-jic23@kernel.org
2022-06-11iio: common: cros_ec_sensors: Add label attributeGwendal Grignou1-21/+9
When sensor location is known, populate iio sysfs "label" attribute: * "accel-base" : the sensor is in the base of the convertible (2-1) device. * "accel-display" : the sensor is in the lid/display plane of the device. * "accel-camera" : the sensor is in the swivel camera subassembly. The non-standard |location| attribute is removed, the field |loc| in cros_ec_sensors_core_state is removed. It apply to standalone accelerometer as well as IMU (accelerometer + gyroscope) and sensors where the location is known (light). Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20220427190804.961697-3-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: Replace strtobool() with kstrtobool()Lars-Peter Clausen1-1/+1
strtobool() is deprecated and just a wrapper around kstrtobool().Replace it with kstrtobool() so the deprecated function can be removed eventually. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220409105812.2113895-1-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10iio: core: Simplify the registration of kfifo buffersMiquel Raynal2-3/+1
Among all the users of the kfifo buffers, no one uses the INDIO_BUFFER_HARDWARE mode. So let's take this as a general rule and simplify a little bit the internals - overall the documentation - by eliminating unused specific cases. Use the INDIO_BUFFER_SOFTWARE mode by default with kfifo buffers, which will basically mimic what all the "non direct" modes do. Cc: Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jyoti Bhayana <jbhayana@google.com> Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220207143840.707510-13-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10iio: st_sensors: Use iio_device_claim/release_direct_mode() when relevantMiquel Raynal1-21/+17
The st_sensors_core driver hardcodes the content of the iio_device_claim_direct_mode() and iio_device_release_direct_mode() helpers. Let's get rid of this handcrafted implementation and use the proper core helpers instead. Additionally, this lowers the tab level (which is always good) and prevents the use of the ->currentmode variable which is not supposed to be used like this anyway. Cc: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220207143840.707510-9-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10iio: st_sensors: Add a local lock for protecting odrMiquel Raynal1-6/+18
Right now the (framework) mlock lock is (ab)used for multiple purposes: 1- protecting concurrent accesses over the odr local cache 2- avoid changing samplig frequency whilst buffer is running Let's start by handling situation #1 with a local lock. Suggested-by: Jonathan Cameron <jic23@kernel.org> Cc: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220207143840.707510-7-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10iio: st_sensors: Drop the protection on _avail functionsMiquel Raynal1-4/+0
The use of a lock there seems pointless. Besides preventing to read these information from userspace while buffers are enabled (which is not supposed to happen), it only protect read accesses over static const values, which are never supposed to be written anyway. Drop these lock calls. Suggested-by: Jonathan Cameron <jic23@kernel.org> Cc: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220207143840.707510-6-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: ssp_sensors: replace usage of found with dedicated list iterator variableJakob Koschel1-7/+6
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220331230632.957634-2-jakobkoschel@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-03-28Merge tag 'char-misc-5.18-rc1' of ↵Linus Torvalds9-76/+49
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...
2022-02-18iio:common:ssp: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etcJonathan Cameron1-6/+2
Letting the compiler remove these functions when the kernel is built without CONFIG_PM_SLEEP support is simpler and less error prone than the use of ifdef based config guards. Also switch to SIMPLE_DEV_PM_OPS rather than open coding the structure. Removing instances of this approach from IIO also stops them being copied into new drivers. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220130193147.279148-17-jic23@kernel.org
2022-02-18iio:common:ssp_sensors: Move exports into IIO_SSP_SENSORS namespaceJonathan Cameron2-8/+9
In order to avoid unnecessary pollution of the global symbol namespace move the common/library functions into a specific namespace and import that into the various specific device drivers that use them. For more information see https://lwn.net/Articles/760045/ Both the exports used between the two common modules and the individual drivers are moved to a single namespace as greater granularity does not feel useful. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220130205701.334592-6-jic23@kernel.org
2022-02-18iio:common:meas-spec: Move exports into IIO_MEAS_SPEC_SENSORSJonathan Cameron1-12/+12
The obvious choice of ms_sensors felt rather too likely to clash with other namespaces introduced in future, hence the longer abbreviation. In order to avoid unnecessary pollution of the global symbol namespace move the common/library functions into a specific namespace and import that into the various specific device drivers that use them. For more information see https://lwn.net/Articles/760045/ Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: William Markezana <william.markezana@meas-spec.com> Cc: Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220130205701.334592-5-jic23@kernel.org
2022-02-18iio:st-sensors: Move exports into IIO_ST_SENSORS namespaceJonathan Cameron5-19/+19
To avoid unnecessary pollution of the global symbol namespace move the driver core and type specific core exports into their a new namespace and import that where needed. For more info see https://lwn.net/Articles/760045/ Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Denis Ciocca <denis.ciocca@st.com> Link: https://lore.kernel.org/r/20220116180535.2367780-14-jic23@kernel.org
2022-02-18iio:st-sensors: Remove duplicate MODULE_*Jonathan Cameron2-10/+0
The core module and type specific core modules are made up of several files. There is no benefit in duplicating the MODULE_* macros in each file so remove them. Noticed whilst adding MODULE_IMPORT_NS() as I missed some files and it still worked, making it clear not all of these blocks were needed. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Denis Ciocca <denis.ciocca@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220116180535.2367780-13-jic23@kernel.org
2022-02-13iio: ssp_sensors: Make use of device propertiesAndy Shevchenko1-17/+5
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220210135724.26660-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-09spi: make remove callback a void functionUwe Kleine-König1-3/+1
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-23iio: ms_sensors: Use sysfs_emit()Lars-Peter Clausen1-2/+2
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `battery_low` and `heater_enable` device attributes of the ms_sensors driver shared code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211216185217.1054495-12-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: st_sensors: don't always auto-enable I2C and SPI interface driversNikita Yushchenko1-2/+0
This patch makes I2C and SPI interface drivers for STMicroelectronics sensor chips individually selectable via Kconfig. The default is kept unchanged - I2C and SPI interface drivers are still selected by default if the corresponding bus support is available. However, the patch makes it possible to explicitly disable drivers that are not needed for a particular target. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220110152432.3799227-1-nikita.yoush@cogentembedded.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-11-17iio/scmi: Add reading "raw" attribute.Andriy Tryshnivskyy1-1/+56
Add IIO_CHAN_INFO_RAW to the mask and implement corresponding reading "raw" attribute in scmi_iio_read_raw. Signed-off-by: Andriy Tryshnivskyy <andriy.tryshnivskyy@opensynergy.com> Acked-by: Jyoti Bhayana <jbhayana@google.com> Link: https://lore.kernel.org/r/20211024091627.28031-3-andriy.tryshnivskyy@opensynergy.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-11-17iio: st-sensors: Use dev_to_iio_dev() in sysfs callbacksLars-Peter Clausen1-2/+2
Using `dev_get_drvdata()` in IIO sysfs callbacks to get a pointer to the IIO device is a relic from the very early days of IIO. The IIO core as well as most other drivers have switched over to using `dev_to_iio_dev()` instead. This driver is one of the last few drivers remaining that uses the outdated idiom, update it. This will allow to eventually update the IIO core to no longer set the drvdata for the IIO device and free it up for driver usage. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211020085349.16178-1-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-11-10Merge tag 'tag-chrome-platform-for-v5.16' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros_ec_typec: - Clean up use of cros_ec_check_features cros_ec_*: - Rename and move cros_ec_pd_command to cros_ec_command, and make changes to cros_ec_typec and cros_ec_proto to use the new common command, reducing duplication. sensorhub: - simplify getting .driver_data in cros_ec_sensors_core and cros_ec_sensorhub misc: - Maintainership change. Enric Balletbo i Serra has moved on from Collabora, so removing him from chrome/platform maintainers. Thanks for all of your hard work maintaining this, Enric, and best of luck to you in your new role! - Add Prashant Malani as driver maintainer for cros_ec_typec.c and cros_usbpd_notify. He was already principal contributor of these drivers" * tag 'tag-chrome-platform-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_proto: Use ec_command for check_features platform/chrome: cros_ec_proto: Use EC struct for features MAINTAINERS: Chrome: Drop Enric Balletbo i Serra platform/chrome: cros_ec_typec: Use cros_ec_command() platform/chrome: cros_ec_proto: Add version for ec_command platform/chrome: cros_ec_proto: Make data pointers void platform/chrome: cros_usbpd_notify: Move ec_command() platform/chrome: cros_usbpd_notify: Rename cros_ec_pd_command() platform/chrome: cros_ec: Fix spelling mistake "responsed" -> "response" platform/chrome: cros_ec_sensorhub: simplify getting .driver_data iio: common: cros_ec_sensors: simplify getting .driver_data platform/chrome: cros-ec-typec: Cleanup use of check_features platform/chrome: cros_ec_proto: Fix check_features ret val MAINTAINERS: Add Prashant's maintainership of cros_ec drivers
2021-10-19Merge tag 'iio-for-5.16a-split-take4' of ↵Greg Kroah-Hartman5-63/+45
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: First set of IIO new device and feature support for the 5.16 cycle Counter subsystem changes now sent separately. This has been a busy cycle, so lots here and a few more stragglers to come next week. Big new feature in this cycle is probably output buffer support. This has been in the works for a very long time so it's great to see Mihail pick up the challenge and build upon his predecessors work to finally bring this feature to mainline. New device support ------------------ * adi,adxl313 - New driver and dt bindings for this low power accelerometer. * adi,adxl355 - New driver and dt bindings for this accelerometer. - Later series adds buffer support. * asahi-kasei,ak8975 - Minor additions to driver to support ak09916 * aspeed,aspeed-adc - Substantial rework plus feature additions to add support for the ast2600 including a new dt bindings doc. * atmel,at91_sama5d2 - Rework and support introduced for the sama7g5 parts. * maxim,max31865 - New driver and bindings for this RTD temperature sensor chip. * nxp,imx8qxp - New driver and bindings for the ADC found on the i.MX 8QuadXPlus Soc. * senseair,sunrise - New driver and bindings for this family of carbon dioxide gas sensors. * sensiron,scd4x - New driver and bindings for this carbon dioxide gas sensor. New features ------------ * Output buffer support. Works in a similar fashion to input buffers, but in this case userspace pushes data into the kfifo which is then drained to the device when a trigger occurs. Support added to the ad5766 DAC driver. * Core, devm_iio_map_array_register() to avoid need for devm_add_action_or_reset() based cleanup in fully managed allocation drivers. * Core iio_push_to_buffers_with_ts_unaligned() function to safely handle a few drivers where it really hard to ensure the correct data alignment in an iio_push_to_buffers_with_timestamp() call. Note this uses a bounce buffer so should be avoided whenever possible. Used in the ti,adc108s102, invense,mpu3050 and adi,adis16400. This closes the last known set of drivers with alignment issues at this interface. * maxim,max1027 - Substantial rework to this driver main target of which was supporting use of other triggers than it's own EOC interrupt. - Transfer optimization. * nxp,fxls8962af - Threshold even support including using it as a wakeup source. Cleanups, minor fixes etc ------------------------- Chances of a common type to multiple drivers: * devm_ conversion and drop of .remove() callbacks in: - adi,ad5064 - adi,ad7291 - adi,ad7303 - adi,ad7746 - adi,ad9832 - adi,adis16080 - dialog,da9150-gpadc - intel,mrfld_adc - marvell,berlin2 - maxim,max1363 - maxim,max44000 - nuvoton,nau7802 - st_sensors (includes a lot of rework!) - ti,ads8344 - ti,lp8788 * devm_platform_ioremap_resource() used to reduce boilerplate - cirrus,ep93xx - rockchip,saradc - stm,stm32-dac * Use dev_err_probe() in more places to both not print on deferred probe and ensure a reason for the deferral is available for debug purposes. - adi,ad8801 - capella,cm36651 - linear,ltc1660 - maxim,ds4424 - maxim,max5821 - microchip,mcp4922 - nxp,lpc18xx - onnn,noa1305 - st,lsm9ds0 - st,st_sensors - st,stm32-dac - ti,afe4403 - ti,afe4404 - ti,dac7311 * Drop error returns in SPI and I2C remove() functions as they are ignored and long term plan is to change these all over to returning void. In some cases these patches just make it 'obvious' they always return 0 where it was the case before but not easy to tell. - adi,ad5380 - adi,ad5446 - adi,ad5686 - adi,ad5592r - bosch,bma400 - bosch,bmc150 - fsl,mma7455 - honeywell,hmc5843 - kionix,kxsd9 - maxim,max5487 - meas,ms5611 - ti,afe4403 Driver specific changes * adi,ad5770r - Bring driver inline with documented bindings. * adi,ad7746 - Trivial style fix * adi,ad7949 - Express some magic values as the underlying parts via new #defines. - Make it work with SPI controllers that don't support 14 or 16 bit messages - Support selection of voltage reference from dt including expanding the dt-bindings to cover this new functionality. * adi,ad799x - Implement selection of external reference voltage on AD7991, AD7995 and AD7999. - Add missing dt-bindings doc for devices supported by this driver. * adi,adislib - Move interrupt startup to better location in startup flow. - Handle devices that cannot mask/unmask the drdy pin and must instead mask at the interrupt controller. Applies to the adis16460 and adis16475 from which we then drop equivalent code. * adi,ltc2983 - Add support for optional reset pin. - Fail to probe if no channels specified in dt binding. * asahi-kasei,ak8975 - dt-binding additions of missing vid-supply regulator. * aspeed,aspeed-adc - Typo fix. * fsl,mma7660 - Mark acpi_device_id table __maybe_unused to avoid build warning. * fsl,imx25-gcq - Avoid initializing regulators that aren't used. * invensense,mpu3050 - Drop a dead protection against a clash with the old input driver. * invensense,mpu6050 - Rework code to not use strcpy() and hence avoid possibility of wrong sized buffers. Note this wasn't a bug, but the new code is a lot more readable. - Mark acpi_device_id table __maybe_unused to avoid build warning. * kionix,kxcjk1013 - dt-binding addition to note it supports interrupts. * marvell,berlin2-adc - Enable COMPILE_TEST building. * maxim,max1027 - Avoid returning success in an error path. * nxp,imx8qxp - Fix warning when runtime pm not enabled via __maybe_unused. * ricoh,rn5t618 - Use the new devm_iio_map_array_register() instead of open coding the same. * samsung,exynos_adc - Improve kconfig help text. * st,lsm6dsx - Move max_fifo_size into the fifo_ops structure where the other configuration parameters are found. * st,st_sensors: - Reorder to ensure we turn the power off after removing userspace interfaces. * senseair,sunrise - Add missing I2C dependency. * ti,twl6030 - Small code tidy up. * tag 'iio-for-5.16a-split-take4' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (148 commits) iio: imx8qxp-adc: mark PM functions as __maybe_unused iio: pressure: ms5611: Make ms5611_remove() return void iio: potentiometer: max5487: Don't return an error in .remove() iio: magn: hmc5843: Make hmc5843_common_remove() return void iio: health: afe4403: Don't return an error in .remove() iio: dac: ad5686: Make ad5686_remove() return void iio: dac: ad5592r: Make ad5592r_remove() return void iio: dac: ad5446: Make ad5446_remove() return void iio: dac: ad5380: Make ad5380_remove() return void iio: accel: mma7455: Make mma7455_core_remove() return void iio: accel: kxsd9: Make kxsd9_common_remove() return void iio: accel: bmi088: Make bmi088_accel_core_remove() return void iio: accel: bmc150: Make bmc150_accel_core_remove() return void iio: accel: bma400: Make bma400_remove() return void drivers:iio:dac:ad5766.c: Add trigger buffer iio: triggered-buffer: extend support to configure output buffers iio: kfifo-buffer: Add output buffer support iio: Add output buffer support iio: documentation: Document scd4x calibration use drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor ...
2021-10-19iio: triggered-buffer: extend support to configure output buffersAlexandru Ardelean1-2/+3
Now that output (kfifo) buffers are supported, we need to extend the {devm_}iio_triggered_buffer_setup_ext() parameter list to take a direction parameter. This allows us to attach an output triggered buffer to a DAC device. Unfortunately it's a bit difficult to add another macro to avoid changing 5 drivers where {devm_}iio_triggered_buffer_setup_ext() is used. Well, it's doable, but may not be worth the trouble vs just updating all these 5 drivers. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Mihail Chindris <mihail.chindris@analog.com> Link: https://lore.kernel.org/r/20211007080035.2531-4-mihail.chindris@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-19iio: st_sensors: Make use of the helper function dev_err_probe()Cai Huoqing1-8/+8
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. Using dev_err_probe() can reduce code size, and the error value gets printed. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210928014055.1431-1-caihuoqing@baidu.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-27iio: common: cros_ec_sensors: simplify getting .driver_dataWolfram Sang1-2/+1
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20210920090522.23784-7-wsa+renesas@sang-engineering.com
2021-09-18iio: ssp_sensors: add more range checking in ssp_parse_dataframe()Dan Carpenter1-1/+8
The "idx" is validated at the start of the loop but it gets incremented during the iteration so it needs to be checked again. Fixes: 50dd64d57eee ("iio: common: ssp_sensors: Add sensorhub driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210909091336.GA26312@kili Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-18iio: ssp_sensors: fix error code in ssp_print_mcu_debug()Dan Carpenter1-1/+1
The ssp_print_mcu_debug() function should return negative error codes on error. Returning "length" is meaningless. This change does not affect runtime because the callers only care about zero/non-zero. Reported-by: Jonathan Cameron <jic23@kernel.org> Fixes: 50dd64d57eee ("iio: common: ssp_sensors: Add sensorhub driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210914105333.GA11657@kili Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: st_sensors: remove reference to parent device object on st_sensor_dataAlexandru Ardelean3-5/+5
The idea behind it, is that all devm_ calls in ST sensors are bound to the parent device object. However, the reference to that object is kept on both the st_sensor_data struct and the IIO object parent (indio_dev->dev.parent). This change only adds a bit consistency and uses the reference stored on indio_dev->dev.parent, to enforce the assumption that all ST sensors' devm_ calls are bound to the same reference as the one store on st_sensor_data. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210823112204.243255-6-aardelean@deviqon.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: st_sensors: remove st_sensors_power_disable() functionAlexandru Ardelean1-19/+15
This change converts the st_sensors_power_enable() function to use devm_add_action_or_reset() handlers to register regulator_disable hooks for when the drivers get unloaded. The parent device of the IIO device object is used. This is based on the assumption that all other devm_ calls in the ST sensors use this reference. This makes the st_sensors_power_disable() un-needed. Removing this also changes unload order a bit, as all ST drivers would call st_sensors_power_disable() first and iio_device_unregister() after that. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210823112204.243255-4-aardelean@deviqon.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: st_sensors: remove st_sensors_deallocate_trigger() functionAlexandru Ardelean1-30/+15
This change converts the st_sensors_allocate_trigger() to use device-managed functions. The parent device of the IIO device object is used. This is based on the assumption that all other devm_ calls in the ST sensors use this reference. That makes the st_sensors_deallocate_trigger() function un-needed, so it can be removed. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210823112204.243255-3-aardelean@deviqon.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-08Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-2/+1
Merge more updates from Andrew Morton: "147 patches, based on 7d2a07b769330c34b4deabeed939325c77a7ec2f. Subsystems affected by this patch series: mm (memory-hotplug, rmap, ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan), alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib, checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig, selftests, ipc, and scripts" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits) scripts: check_extable: fix typo in user error message mm/workingset: correct kernel-doc notations ipc: replace costly bailout check in sysvipc_find_ipc() selftests/memfd: remove unused variable Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH configs: remove the obsolete CONFIG_INPUT_POLLDEV prctl: allow to setup brk for et_dyn executables pid: cleanup the stale comment mentioning pidmap_init(). kernel/fork.c: unexport get_{mm,task}_exe_file coredump: fix memleak in dump_vma_snapshot() fs/coredump.c: log if a core dump is aborted due to changed file permissions nilfs2: use refcount_dec_and_lock() to fix potential UAF nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group nilfs2: fix NULL pointer in nilfs_##name##_attr_release nilfs2: fix memory leak in nilfs_sysfs_create_device_group trap: cleanup trap_init() init: move usermodehelper_enable() to populate_rootfs() ...
2021-09-08iio/drivers/hid-sensor: use HZ macrosDaniel Lezcano1-2/+1
HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. Link: https://lkml.kernel.org/r/20210816114732.1834145-8-daniel.lezcano@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Christian Eggers <ceggers@arri.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-24iio: st-sensors: Remove some unused includes and add some that should be thereJonathan Cameron6-7/+4
The st-sensors drivers have changed in structure over time, and includes have not always kept up with this. Let's bring them back to nearer the ideal. Identified with the include-what-you-use tool and careful checking of its suggestions. Note I haven't been particularly aggressive here, so this is just the cases where the include obviously isn't needed rather than the more subtle corners. Note I took the opportunity to add mod_devicetable.h as I generally prefer to see that when acpi or of match tables are present. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Denis Ciocca <denis.ciocca@st.com> Cc: Hans de Goede <hdegoede@redhat.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210608175149.4019289-1-jic23@kernel.org
2021-06-16iio: hid-sensors: Update header includesJonathan Cameron3-10/+4
General driver churn doesn't always include updates of header includes. Manual review of the output of the include-what-you-use checker lead to the following cleanup. Hopefuly this brings things back to a good state for the hid-sensor drivers. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20210608205510.4033887-1-jic23@kernel.org
2021-06-16iio: hid-sensors: lighten exported symbols by moving to IIO_HID namespaceAndy Shevchenko2-17/+18
A namespace for exported symbols makes clear who is a provider and who is a consumer of the certain resources. Besides that, it doesn't pollute the common namespace. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20210614162447.5392-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13iio: scmi: fix spelling of SPDX tagTom Rix1-1/+1
checkpatch looks for SPDX-License-Identifier. Remove the extra spaces. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20210610214438.3161140-7-trix@redhat.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-03iio: hid: trigger: Balance runtime pm + use pm_runtime_resume_and_get()Jonathan Cameron1-6/+2
The call to pm_runtime_put_noidle() in remove() callback is not balanced by any gets Note this doesn't cause any problems beyond reader confusion as the runtime pm core protects against the reference counter going negative. Whilst here, use pm_runtiem_resume_and_get() to simplify code a little. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/20210509113354.660190-9-jic23@kernel.org
2021-05-17iio: core: move @id from struct iio_dev to struct iio_dev_opaqueJonathan Cameron1-1/+1
Continuing from Alexandru Ardelean's introduction of the split between driver modifiable fields and those that should only be set by the core. This could have been done in two steps to make the actual move after introducing iio_device_id() but there seemed limited point to that given how mechanical the majority of the patch is. Includes fixup from Alex for missing mxs-lradc-adc conversion. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20210426174911.397061-2-jic23@kernel.org
2021-05-17iio: common: scmi_sensors: Drop duplicate setting of iio_dev.dev.parentJonathan Cameron1-1/+0
This is already set to the same value in devm_iio_device_alloc() Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jyoti Bhayana <jbhayana@google.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20210426170251.351957-9-jic23@kernel.org
2021-05-10iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGERAlexandru Ardelean1-0/+1
During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger"), the iio_triggered_buffer_{setup,cleanup}() functions got moved under the hid-sensor-trigger module. The above change works fine, if any of the sensors get built. However, when only the common hid-sensor-trigger module gets built (and none of the drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced. Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets selected. All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this change removes the IIO_TRIGGERED_BUFFER enforcement from each driver. Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger") Reported-by: Thomas Deutschmann <whissi@gentoo.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20210414084955.260117-1-aardelean@deviqon.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-26Merge tag 'arm-drivers-5.13' of ↵Linus Torvalds1-50/+50
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: TEE/OP-TEE: - Add tracepoints around calls to secure world Memory controller drivers: - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms - Add debug statistics to Tegra20 memory controller - Update Tegra bindings and convert to dtschema ARM SCMI Firmware: - Support for modular SCMI protocols and vendor specific extensions - New SCMI IIO driver - Per-cpu DVFS The other driver changes are all from the platform maintainers directly and reflect the drivers that don't fit into any other subsystem as well as treewide changes for a particular platform. SoCFPGA: - Various cleanups contributed by Krzysztof Kozlowski Mediatek: - add MT8183 support to mutex driver - MMSYS: use per SoC array to describe the possible routing - add MMSYS support for MT8183 and MT8167 - add support for PMIC wrapper with integrated arbiter - add support for MT8192/MT6873 Tegra: - Bug fixes to PMC and clock drivers NXP/i.MX: - Update SCU power domain driver to keep console domain power on. - Add missing ADC1 power domain to SCU power domain driver. - Update comments for single global power domain in SCU power domain driver. - Add i.MX51/i.MX53 unique id support to i.MX SoC driver. NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers OMAP: - Preparation to use devicetree for genpd - ti-sysc needs iorange check improved when the interconnect target module has no control registers listed - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid issues with missing resources and unnecessary deferred probe - ti-sysc debug option can now detect more devices - ti-sysc now warns if an old incomplete devicetree data is found as we now rely on it being complete for am3 and 4 - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7 - omap-prm driver needs to enable autoidle retention support for omap4 - omap5 clocks are missing gpmc and ocmc clock registers - pci-dra7xx now needs to use builtin_platform_driver instead of using builtin_platform_driver_probe for deferred probe to work Raspberry Pi: - Fix-up all RPi firmware drivers so as for unbind to happen in an orderly fashion - Support for RPi's PoE hat PWM bus Qualcomm - Improved detection for SCM calling conventions - Support for OEM specific wifi firmware path - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP" * tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: aspeed: fix a ternary sign expansion bug memory: mtk-smi: Add device-link between smi-larb and smi-common memory: samsung: exynos5422-dmc: handle clk_set_parent() failure memory: renesas-rpc-if: fix possible NULL pointer dereference of resource clk: socfpga: fix iomem pointer cast on 64-bit soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning soc: fsl: enable acpi support in RCPM driver soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" ...
2021-03-30iio/scmi: Port driver to the new scmi_sensor_proto_ops interfaceCristian Marussi1-50/+50
Port the scmi iio driver to the new SCMI sensor interface based on protocol handles and common devm_get_ops(). Link: https://lore.kernel.org/r/20210316124903.35011-26-cristian.marussi@arm.com Link: https://lore.kernel.org/r/20210330134711.1962-1-cristian.marussi@arm.com Acked-by: Jyoti Bhayana <jbhayana@google.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>