summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
AgeCommit message (Collapse)AuthorFilesLines
2020-08-14Merge tag 'pwm/for-5.9-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "The majority of this batch is conversion of the PWM period and duty cycle to 64-bit unsigned integers, which is required so that some types of hardware can generate the full range of signals that they're capable of. The remainder is mostly minor fixes and cleanups" * tag 'pwm/for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: bcm-iproc: handle clk_get_rate() return pwm: Replace HTTP links with HTTPS ones pwm: omap-dmtimer: Repair pwm_omap_dmtimer_chip's broken kerneldoc header pwm: mediatek: Provide missing kerneldoc description for 'soc' arg pwm: bcm-kona: Remove impossible comparison when validating duty cycle pwm: bcm-iproc: Remove impossible comparison when validating duty cycle pwm: iqs620a: Use lowercase hexadecimal literals for consistency pwm: Convert period and duty cycle to u64 clk: pwm: Use 64-bit division function backlight: pwm_bl: Use 64-bit division function pwm: sun4i: Use nsecs_to_jiffies to avoid a division pwm: sifive: Use 64-bit division macro pwm: iqs620a: Use 64-bit division pwm: imx27: Use 64-bit division macro pwm: imx-tpm: Use 64-bit division macro pwm: clps711x: Use 64-bit division macro hwmon: pwm-fan: Use 64-bit division macro drm/i915: Use 64-bit division macro
2020-08-05Merge tag 'hwmon-for-v5.9' of ↵Linus Torvalds26-101/+1007
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "Highlights: - New driver for Sparx5 SoC temperature sensot - New driver for Corsair Commander Pro - MAX20710 support added to max20730 driver Enhancements: - max6697: Allow max6581 to create tempX_offset attributes - gsc (Gateworks System Controller): add 16bit pre-scaled voltage mode - adm1275: Enable adm1278 ADM1278_TEMP1_EN - dell-smm: Add Latitude 5480 to fan control whitelist Fixes: - adc128d818: Fix advanced configuration register init - pmbus/core: Use s64 instead of long for calculations to fix overflow issues with 32-bit architectures Plus various cleanups in several drivers" * tag 'hwmon-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (32 commits) hwmon: (adc128d818) Fix advanced configuration register init hwmon: (axi-fan-control) remove duplicate macros hwmon: (i5k_amb, vt8231) Drop uses of pci_read_config_*() return value hwmon: (sparx5) Make symbol 's5_temp_match' static hwmon: (corsair-cpro) add reading pwm values hwmon: sparx5: Add Sparx5 SoC temperature driver dt-bindings: hwmon: Add Sparx5 temperature sensor hwmon: (tmp401) Replace HTTP links with HTTPS ones hwmon: (lm95234) Replace HTTP links with HTTPS ones hwmon: (lm90) Replace HTTP links with HTTPS ones hwmon: (k8temp) Replace HTTP links with HTTPS ones hwmon: (jc42) Replace HTTP links with HTTPS ones hwmon: (ina2xx) Replace HTTP links with HTTPS ones hwmon: (ina209) Replace HTTP links with HTTPS ones hwmon: Replace HTTP links with HTTPS ones docs: hwmon: Replace HTTP links with HTTPS ones hwmon: (adm1025) Replace HTTP links with HTTPS ones hwmon: add Corsair Commander Pro driver hwmon: (max6697) Allow max6581 to create tempX_offset hwmon: (tmmp513) Replace HTTP links with HTTPS links ...
2020-08-04hwmon: (adc128d818) Fix advanced configuration register initRoy van Doormaal1-12/+12
If the operation mode is non-zero and an external reference voltage is set, first the operation mode is written to the advanced configuration register, followed by the externel reference enable bit, resetting the configuration mode to 0. To fix this, first compose the value of the advanced configuration register based on the configuration mode and the external reference voltage. The advanced configuration register is then written to the device, if it is different from the default register value (0x0). Signed-off-by: Roy van Doormaal <roy.van.doormaal@prodrive-technologies.com> Link: https://lore.kernel.org/r/20200728151846.231785-1-roy.van.doormaal@prodrive-technologies.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-08-04hwmon: (axi-fan-control) remove duplicate macrosAlexandru Ardelean1-4/+0
These macros are also present in the "include/linux/fpga/adi-axi-common.h" file which is included in this driver. This patch removes them from the AXI Fan Control driver. No sense in having them in 2 places. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20200803054311.98174-1-alexandru.ardelean@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-08-04hwmon: (i5k_amb, vt8231) Drop uses of pci_read_config_*() return valueSaheed O. Bolarinwa2-8/+12
The return value of pci_read_config_*() may not indicate a device error. However, the value read by these functions is more likely to indicate this kind of error. This presents two overlapping ways of reporting errors and complicates error checking. It is possible to move to one single way of checking for error if the dependency on the return value of these functions is removed, then it can later be made to return void. Remove all uses of the return value of pci_read_config_*(). Check the actual value read for ~0. In this case, ~0 is an invalid value thus it indicates some kind of error. Suggested-by: Bjorn Helgaas <bjorn@helgaas.com> Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Link: https://lore.kernel.org/r/20200801112446.149549-11-refactormyself@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-26Merge branch 'x86/urgent' into x86/cleanupsIngo Molnar12-23/+77
Refresh the branch for a dependent commit. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-07-24hwmon: (sparx5) Make symbol 's5_temp_match' staticWei Yongjun1-1/+1
The sparse tool complains as follows: drivers/hwmon/sparx5-temp.c:150:27: warning: symbol 's5_temp_match' was not declared. Should it be static? This variable is not used outside of sparx5-temp.c, this commit marks it static. Fixes: c2cb4b5777e1 ("hwmon: sparx5: Add Sparx5 SoC temperature driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200721134919.34033-1-weiyongjun1@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (corsair-cpro) add reading pwm valuesMarius Zachmann1-20/+44
This adds the possibility for reading pwm values. These can not be read if the device is controlled via fan_target or a fan curve and will return an error in this case. Since an error is expected, this adds some rudimentary error handling. Changes: - add CTL_GET_FAN_PWM and use it via get_data - pwm returns -ENODATA if the device returns error 0x12 - fan_target now returns -ENODATA when the driver is started or a pwm value is set. - add ccp_get_errno to determine errno from device error. - get_data now has a parameter to determine whether to read one or two bytes of data. - update documentation - fix missing surname in MAINTAINERS Signed-off-by: Marius Zachmann <mail@mariuszachmann.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: sparx5: Add Sparx5 SoC temperature driverLars Povlsen3-0/+179
This patch adds a temperature sensor driver to the Sparx5 SoC. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200618135951.25441-4-lars.povlsen@microchip.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (ina2xx) Replace HTTP links with HTTPS onesAlexander A. Klimov1-5/+5
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719181530.60878-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (ina209) Replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719180521.60811-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: Replace HTTP links with HTTPS onesAlexander A. Klimov6-8/+8
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719175512.60745-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (adm1025) Replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200713140028.34775-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: add Corsair Commander Pro driverMarius Zachmann3-0/+569
This is v7 of a driver for the Corsair Commander Pro. It provides sysfs attributes for: - Reading fan speed - Reading temp sensors - Reading voltage values - Writing pwm and reading last written pwm - Reading fan and temp connection status It is an usb driver, so it needs to be ignored by usbhid. The Corsair Commander Pro is a fan controller and provides no means for user interaction. The two device numbers are there, because there is a slightly different version of the same device. (Only difference seem to be in some presets.) Squashed: hwmon: (corsair-cpro) add fan_target This adds fan_target entries to the corsair-cpro driver. Reading the attribute from the device does not seem possible, so it returns the last set value (same as pwm). send_usb_cmd now has one more argument, which is needed for the fan_target command. hwmon: corsair-cpro: Change to HID driver This changes corsair-cpro to a hid driver using hid reports. Signed-off-by: Marius Zachmann <mail@mariuszachmann.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200626055936.4441-1-mail@mariuszachmann.de Link: https://lore.kernel.org/r/20200709141413.30790-1-mail@mariuszachmann.de [groeck: Squashed follow-up patches to avoid changes in HID code] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (max6697) Allow max6581 to create tempX_offsetChu Lin1-2/+94
Add tempX_offset attribute support to max6697 driver. Temperature offsets are only supported for MAX6581. Testing: echo 16250 > temp2_offset cat temp2_offset 16250 echo 17500 > temp3_offset cat temp3_offset 17500 cat temp4_offset 0 cat temp2_offset 17500 echo 0 > temp2_offset cat temp2_offset 0 cat temp3_offset 17500 echo -0 > temp2_offset cat temp2_offset 0 echo -100000 > temp2_offset cat temp2_input 4875 echo 10000 > temp2_offset cat temp2_input 47125 echo -2000 > temp2_offset cat temp2_input 34875 echo -0 > temp2_offset cat temp2_input 37000 Signed-off-by: Chu Lin <linchuyuan@google.com> Link: https://lore.kernel.org/r/20200707171528.2929275-1-linchuyuan@google.com [groeck: Fixed checkpatch warning (unnecessary { })] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (tmmp513) Replace HTTP links with HTTPS linksAlexander A. Klimov1-2/+2
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200703185657.15329-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (pmbus/core) Use s64 instead of long for calculationsJosh Lehan1-35/+31
Using s64 type, instead of long type, for internal calculations and for the sysfs interface. This allows 64-bit values to appear correctly on 32-bit kernels. As wattage is reported in microwatts, monitoring a power supply over 2KW requires this. Although it may seem unlikely to run a 32-bit kernel on such a large machine, enterprise servers often include a BMC, and the BMC might be running a 32-bit kernel. Signed-off-by: Josh Lehan <krellan@google.com> [groeck: Removed Change-Id and other tags, reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (pmbus/max20730) Add max20710 supportUgur Usug2-8/+45
Add support for max20710 into the existing max20730 driver. Signed-off-by: Ugur Usug <ugur.usug@maximintegrated.com> Link: https://lore.kernel.org/r/BYAPR11MB317423C13909AE6F1913BBD7FD9C0@BYAPR11MB3174.namprd11.prod.outlook.com [groeck: Fixed various whitespace errors] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-19hwmon: (gsc) add 16bit pre-scaled voltage modeTim Harvey1-3/+5
add a 16-bit pre-scaled voltage mode to adc and clarify that existing pre-scaled mode is 24bit. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1591714640-10332-3-git-send-email-tharvey@gateworks.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-19hwmon: (adm1275) Enable adm1278 ADM1278_TEMP1_ENManikandan Elumalai1-7/+6
The adm1278 temp attribute need it for openbmc platform . This feature not enabled by default, so PMON_CONFIG needs to enable it. Signed-off-by: Manikandan Elumalai <manikandan.hcl.ers.epl@gmail.com> Link: https://lore.kernel.org/r/20200622153727.GA9347@cnn [groeck: Split long line] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-19hwmon: (dell-smm) Add Latitude 5480 to fan control whitelistJeffrey Lin1-0/+8
This allows manual PWM control without the BIOS fighting back on Dell Latitude 5480. Signed-off-by: Jeffrey Lin <jeffrey@icurse.nl> Acked-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200621045246.929649-1-jeffrey@icurse.nl Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-19hwmon: (nct6683) Replace container_of() with kobj_to_dev()Wang Qing1-4/+4
Use kobj_to_dev() instead of container_of(). Signed-off-by: Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1592035604-22336-1-git-send-email-wangqing@vivo.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-19hwmon: (i5k_amb) remove redundant assignment to variable resColin Ian King1-1/+1
The variable res is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200610123638.1133428-1-colin.king@canonical.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-18hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drivesMaciej S. Szmigiero1-0/+43
It has been observed that Toshiba DT01ACA family drives have WRITE FPDMA QUEUED command timeouts and sometimes just freeze until power-cycled under heavy write loads when their temperature is getting polled in SCT mode. The SMART mode seems to be fine, though. Let's make sure we don't use SCT mode for these drives then. While only the 3 TB model was actually caught exhibiting the problem let's play safe here to avoid data corruption and extend the ban to the whole family. Fixes: 5b46903d8bf3 ("hwmon: Driver for disk and solid state drives with temperature sensors") Cc: stable@vger.kernel.org Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Link: https://lore.kernel.org/r/0cb2e7022b66c6d21d3f189a12a97878d0e7511b.1595075458.git.mail@maciej.szmigiero.name Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-15hwmon: (scmi) Fix potential buffer overflow in scmi_hwmon_probe()Cristian Marussi1-1/+1
SMATCH detected a potential buffer overflow in the manipulation of hwmon_attributes array inside the scmi_hwmon_probe function: drivers/hwmon/scmi-hwmon.c:226 scmi_hwmon_probe() error: buffer overflow 'hwmon_attributes' 6 <= 9 Fix it by statically declaring the size of the array as the maximum possible as defined by hwmon_max define. Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20200715121338.GA18761@e119603-lin.cambridge.arm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-14hwmon: (nct6775) Accept PECI Calibration as temperature source for NCT6798DGuenter Roeck1-3/+3
Stefan Dietrich reports invalid temperature source messages on Asus Formula XII Z490. nct6775 nct6775.656: Invalid temperature source 28 at index 0, source register 0x100, temp register 0x73 Debugging suggests that temperature source 28 reports the CPU temperature. Let's assume that temperature sources 28 and 29 reflect "PECI Agent {0,1} Calibration", similar to other chips of the series. Reported-by: Stefan Dietrich <roots@gmx.de> Cc: Stefan Dietrich <roots@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-09hwmon: (adm1275) Make sure we are reading enough data for different chipsChu Lin1-2/+8
Issue: When PEC is enabled, binding adm1272 to the adm1275 would fail due to PEC error. See below: adm1275: probe of xxxx failed with error -74 Diagnosis: Per the datasheet of adm1272, adm1278, adm1293 and amd1294, PMON_CONFIG (0xd4) is 16bits wide. On the other hand, PMON_CONFIG (0xd4) for adm1275 is 8bits wide. The driver should not assume everything is 8bits wide and read only 8bits from it. Solution: If it is adm1272, adm1278, adm1293 and adm1294, use i2c_read_word. Else, use i2c_read_byte Testing: Binding adm1272 to the driver. The change is only tested on adm1272. Signed-off-by: Chu Lin <linchuyuan@google.com> Link: https://lore.kernel.org/r/20200709040612.3977094-1-linchuyuan@google.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-07hwmon: (emc2103) fix unable to change fan pwm1_enable attributeVishwas M1-1/+1
This patch fixes a bug which does not let FAN mode to be changed from sysfs(pwm1_enable). i.e pwm1_enable can not be set to 3, it will always remain at 0. This is caused because the device driver handles the result of "read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg)" incorrectly. The driver thinks an error has occurred if the (result != 0). This has been fixed by changing the condition to (result < 0). Signed-off-by: Vishwas M <vishwas.reddy.vr@gmail.com> Link: https://lore.kernel.org/r/20200707142747.118414-1-vishwas.reddy.vr@gmail.com Fixes: 9df7305b5a86 ("hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller") Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-07hwmon: (amd_energy) match for supported modelsNaveen Krishna Chatradhi1-1/+1
The energy counters of certain models seems to be reporting inconsistent values. Hence, match for the supported models. Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com> Fixes: 8abee9566b7e ("hwmon: Add amd_energy driver to report energy counters") Link: https://lore.kernel.org/r/20200706171715.124993-1-nchatrad@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-05hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflowEvgeny Novikov1-0/+2
aspeed_create_fan() reads a pwm_port value using of_property_read_u32(). If pwm_port will be more than ARRAY_SIZE(pwm_port_params), there will be a buffer overflow in aspeed_create_pwm_port()->aspeed_set_pwm_port_enable(). The patch fixes the potential buffer overflow. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Link: https://lore.kernel.org/r/20200703111518.9644-1-novikov@ispras.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-02hwmon: (pmbus) fix a typo in Kconfig SENSORS_IR35221 optionTao Ren1-1/+1
Fix a typo in SENSORS_IR35221 option: module name should be "ir35221" instead of "ir35521". Fixes: 8991ebd9c9a6 ("hwmon: (pmbus) Add client driver for IR35221") Cc: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Link: https://lore.kernel.org/r/20200702221349.18139-1-rentao.bupt@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-06-25hwmon: (acpi_power_meter) Fix potential memory leak in acpi_power_meter_add()Misono Tomohiro1-1/+3
Although it rarely happens, we should call free_capabilities() if error happens after read_capabilities() to free allocated strings. Fixes: de584afa5e188 ("hwmon driver for ACPI 4.0 power meters") Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Link: https://lore.kernel.org/r/20200625043242.31175-1-misono.tomohiro@jp.fujitsu.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-06-24hwmon: (max6697) Make sure the OVERT mask is set correctlyChu Lin1-3/+4
Per the datasheet for max6697, OVERT mask and ALERT mask are different. For example, the 7th bit of OVERT is the local channel but for alert mask, the 6th bit is the local channel. Therefore, we can't apply the same mask for both registers. In addition to that, the max6697 driver is supposed to be compatibale with different models. I manually went over all the listed chips and made sure all chip types have the same layout. Testing; mask value of 0x9 should map to 0x44 for ALERT and 0x84 for OVERT. I used iotool to read the reg value back to verify. I only tested this change on max6581. Reference: https://datasheets.maximintegrated.com/en/ds/MAX6581.pdf https://datasheets.maximintegrated.com/en/ds/MAX6697.pdf https://datasheets.maximintegrated.com/en/ds/MAX6699.pdf Signed-off-by: Chu Lin <linchuyuan@google.com> Fixes: 5372d2d71c46e ("hwmon: Driver for Maxim MAX6697 and compatibles") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-06-23hwmon: (pmbus) Fix page vs. register when accessing fansJan Kundrát1-4/+4
Commit 16358542f32f ("hwmon: (pmbus) Implement multi-phase support") added support for multi-phase pmbus devices. However, when calling pmbus_add_sensor() for fans, the patch swapped the `page` and `reg` attributes. As a result, the fan speeds were reported as 0 RPM on my device. Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Fixes: 16358542f32f ("hwmon: (pmbus) Implement multi-phase support") Cc: stable@vger.kernel.org # v5.7+ Link: https://lore.kernel.org/r/449bc9e6c0e4305581e45905ce9d043b356a9932.1592904387.git.jan.kundrat@cesnet.cz [groeck: Fixed references to offending commit] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-06-23hwmon: (bt1-pvt) Mark is_visible functions staticGuenter Roeck1-4/+4
0-day reports: drivers/hwmon/bt1-pvt.c:303:16: warning: no previous declaration for 'pvt_limit_is_visible' drivers/hwmon/bt1-pvt.c:308:16: warning: no previous declaration for 'pvt_alarm_is_visible' Declare both functions static. Reported-by: kernel test robot <lkp@intel.com> Fixes: 87976ce2825d("hwmon: Add Baikal-T1 PVT sensor driver") Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-06-23hwmon: (bt1-pvt) Define Temp- and Volt-to-N poly as maybe-unusedSerge Semin1-2/+2
Clang-based kernel building with W=1 warns that some static const variables are unused: drivers/hwmon/bt1-pvt.c:67:30: warning: unused variable 'poly_temp_to_N' [-Wunused-const-variable] static const struct pvt_poly poly_temp_to_N = { ^ drivers/hwmon/bt1-pvt.c:99:30: warning: unused variable 'poly_volt_to_N' [-Wunused-const-variable] static const struct pvt_poly poly_volt_to_N = { ^ Indeed these polynomials are utilized only when the PVT sensor alarms are enabled. In that case they are used to convert the temperature and voltage alarm limits from normal quantities (Volts and degree Celsius) to the sensor data representation N = [0, 1023]. Otherwise when alarms are disabled the driver only does the detected data conversion to the human readable form and doesn't need that polynomials defined. So let's mark the Temp-to-N and Volt-to-N polynomials with __maybe_unused attribute. Note gcc with W=1 doesn't notice the problem. Fixes: 87976ce2825d ("hwmon: Add Baikal-T1 PVT sensor driver") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Link: https://lore.kernel.org/r/20200603000753.391-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-06-16hwmon: pwm-fan: Use 64-bit division macroGuru Das Srinagesh1-1/+1
Since the PWM framework is switching struct pwm_args.period's datatype to u64, prepare for this transition by using DIV_ROUND_UP_ULL to handle a 64-bit dividend. Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-06-15x86/msr: Lift AMD family 0x15 power-specific MSRsBorislav Petkov1-4/+0
... into the global msr-index.h header because they're used in multiple compilation units. Sort the MSR list a bit. Update the msr-index.h copy in tools. No functional changes. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lkml.kernel.org/r/20200608164847.14232-1-bp@alien8.de
2020-06-11Merge branch 'x86/entry' into ras/coreThomas Gleixner27-120/+3233
to fixup conflicts in arch/x86/kernel/cpu/mce/core.c so MCE specific follow up patches can be applied without creating a horrible merge conflict afterwards.
2020-05-28hwmon: Add Baikal-T1 PVT sensor driverSerge Semin4-0/+1416
Baikal-T1 SoC provides an embedded process, voltage and temperature sensor to monitor an internal SoC environment (chip temperature, supply voltage and process monitor) and on time detect critical situations, which may cause the system instability and even damages. The IP-block is based on the Analog Bits PVT sensor, but is equipped with a dedicated control wrapper, which provides a MMIO registers-based access to the sensor core functionality (APB3-bus based) and exposes an additional functions like thresholds/data ready interrupts, its status and masks, measurements timeout. All of these is used to create a hwmon driver being added to the kernel by this commit. The driver implements support for the hardware monitoring capabilities of Baikal-T1 process, voltage and temperature sensors. PVT IP-core consists of one temperature and four voltage sensors, each of which is implemented as a dedicated hwmon channel config. The driver can optionally provide the hwmon alarms for each sensor the PVT controller supports. The alarms functionality is made compile-time configurable due to the hardware interface implementation peculiarity, which is connected with an ability to convert data from only one sensor at a time. Additional limitation is that the controller performs the thresholds checking synchronously with the data conversion procedure. Due to these limitations in order to have the hwmon alarms automatically detected the driver code must switch from one sensor to another, read converted data and manually check the threshold status bits. Depending on the measurements timeout settings this design may cause additional burden on the system performance. By default if the alarms kernel config is disabled the data conversion is performed by the driver on demand when read operation is requested via corresponding _input-file. Co-developed-by: Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru> Signed-off-by: Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-28hwmon: Add notification supportGuenter Roeck1-3/+65
For hwmon drivers using the hwmon_device_register_with_info() API, it is desirable to have a generic notification mechanism available. This mechanism can be used to notify userspace as well as the thermal subsystem if the driver experiences any events, such as warning or critical alarms. Implement hwmon_notify_event() to provide this mechanism. The function generates a sysfs event and a udev event. If the device is registered with the thermal subsystem and the event is associated with a temperature sensor, also notify the thermal subsystem that a thermal event occurred. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-27hwmon: (applesmc) avoid overlong udelay()Arnd Bergmann1-3/+9
Building this driver with "clang -O3" produces a link error after the compiler partially unrolls the loop and 256ms becomes a compile-time constant that triggers the check in udelay(): ld.lld: error: undefined symbol: __bad_udelay >>> referenced by applesmc.c >>> hwmon/applesmc.o:(read_smc) in archive drivers/built-in.a I can see no reason against using a sleeping function here, as no part of the driver runs in atomic context, so instead use usleep_range() with a wide range and use jiffies for the end condition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200527135207.1118624-1-arnd@arndb.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-26hwmon: (nct7904) Set default timeoutYuechao Zhao1-4/+4
The timeout module parameter should not be used for setting the default timeout. Because, if you set the timeout = 0, the default timeout will be meaningless. And the timeout module parameter of 0 means "no timeout module parameter specified". Signed-off-by: Yuechao Zhao <yuechao.zhao@advantech.com.cn> Link: https://lore.kernel.org/r/1590560219-41328-1-git-send-email-yuechao.zhao@advantech.com.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-26hwmon: (amd_energy) Missing platform_driver_unregister() on error in ↵Wei Yongjun1-1/+3
amd_energy_init() Add the missing platform_driver_unregister() before return from amd_energy_init() in the error handling case. Fixes: 8abee9566b7e ("hwmon: Add amd_energy driver to report energy counters") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Naveen krishna Chatradhi <nchatrad@amd.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200527022417.105620-1-weiyongjun1@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-22hwmon: (k10temp) Add AMD family 17h model 60h PCI matchAlexander Monakov1-0/+1
Add support for retrieving Tdie and Tctl on AMD Renoir (4000-series Ryzen CPUs). It appears SMU offsets for reading current/voltage and CCD temperature have changed for this generation (reads from currently used offsets yield zeros), so those features cannot be enabled so trivially. Signed-off-by: Alexander Monakov <amonakov@ispras.ru> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lkml.kernel.org/r/20200510204842.2603-3-amonakov@ispras.ru
2020-05-22Merge tag 'ib-mfd-hwmon-v5.8' into hwmon-nextGuenter Roeck3-0/+400
Immutable branch between MFD and HWMON due for the v5.8 merge window
2020-05-22hwmon: Add amd_energy driver to report energy countersNaveen Krishna Chatradhi3-0/+417
This patch adds hwmon based amd_energy driver support for family 17h processors from AMD. The driver provides following interface to the userspace 1. Reports the per core consumption * file: "energy%d_input", label: "Ecore%03d" 2. Reports per socket energy consumption * file: "energy%d_input", label: "Esocket%d" 3. To, increase the wrap around time of the socket energy counters, a 64bit accumultor is implemented. 4. Reports scaled energy value in Joules. Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com> Link: https://lore.kernel.org/r/20200519155011.56184-1-nchatrad@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-22hwmon: (nct7802) Replace container_of() APIhailizheng1-3/+3
Replace container_of() API with kobj_to_dev(). Signed-off-by: hailizheng <haili.zheng@powercore.com.cn> Link: https://lore.kernel.org/r/1589891119-16508-1-git-send-email-haili.zheng@powercore.com.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-22hwmon: (lm90) Add max6654 support to lm90 driverJosh Lehan2-8/+46
Add support for the Maxim MAX6654 to the lm90 driver. The MAX6654 is a temperature sensor, similar to the others, but with some differences regarding the configuration register, and the sampling rate at which extended resolution becomes possible. Signed-off-by: Josh Lehan <krellan@google.com> Link: https://lore.kernel.org/r/20200513184248.145765-1-krellan@google.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-22hwmon : (nct6775) Use kobj_to_dev() APIzhouchuangao1-5/+5
Use kobj_to_dev() API instead of container_of(). Signed-off-by: zhouchuangao <zhouchuangao@xiaomi.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>