summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
AgeCommit message (Collapse)AuthorFilesLines
2022-10-31drm/vmwgfx: Cleanup the cursor snooping codeZack Rusin1-12/+17
Cursor snooping depended on implicit size and format which made debugging quite difficult. Make the code easier to following by making everything explicit and instead of using magic numbers predefine all the parameters the code depends on. Also fixes incorrectly computed pitches for non-aligned cursor snoops. Fix which has no practical effect because non-aligned cursor snoops are not used by the X11 driver and Wayland cursors will go through mob cursors, instead of surface dma's. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Michael Banack <banackm@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026031936.1004280-2-zack@kde.org
2022-10-31drm/vmwgfx: Validate the box size for the snooped cursorZack Rusin1-1/+2
Invalid userspace dma surface copies could potentially overflow the memcpy from the surface to the snooped image leading to crashes. To fix it the dimensions of the copybox have to be validated against the expected size of the snooped cursor. Signed-off-by: Zack Rusin <zackr@vmware.com> Fixes: 2ac863719e51 ("vmwgfx: Snoop DMA transfers with non-covering sizes") Cc: <stable@vger.kernel.org> # v3.2+ Reviewed-by: Michael Banack <banackm@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026031936.1004280-1-zack@kde.org
2022-10-25drm/vmwgfx: Remove explicit and broken vblank handlingZack Rusin1-34/+0
The explicit vblank handling was never finished. The driver never had the full implementation of vblank and what was there is emulated by DRM when the driver doesn't pretend to be implementing it itself. Let DRM handle the vblank emulation and stop pretending the driver is doing anything special with vblank. In the future it would make sense to implement helpers for full vblank handling because vkms and amdgpu_vkms already have that code. Exporting it to common helpers and having all three drivers share it would make sense (that would be largely just to allow more of igt to run). Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Michael Banack <banackm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-15-zack@kde.org
2022-10-25drm/vmwgfx: Port the framebuffer code to drm fb helpersZack Rusin1-70/+9
Instead of using vmwgfx specific framebuffer implementation use the drm fb helpers. There's no change in functionality, the only difference is a reduction in the amount of code inside the vmwgfx module. drm fb helpers do not deal correctly with changes in crtc preferred mode at runtime, but the old fb code wasn't dealing with it either. Same situation applies to high-res fb consoles - the old code was limited to 1176x885 because it was checking for legacy/deprecated memory limites, the drm fb helpers are limited to the initial resolution set on fb due to first problem (drm fb helpers being unable to handle hotplug crtc preferred mode changes). This also removes the kernel config for disabling fb support which hasn't been used or supported in a very long time. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-14-zack@kde.org
2022-10-25drm/vmwgfx: Diff cursors when using cmdsMichael Banack1-60/+60
Extend the cursor diffing support to support the command-path. Signed-off-by: Michael Banack <banackm@vmware.com> Signed-off-by: Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-10-zack@kde.org
2022-10-25drm/vmwgfx: Support cursor surfaces with mob cursorMichael Banack1-29/+49
Add support for cursor surfaces when using mob cursors. Signed-off-by: Michael Banack <banackm@vmware.com> Signed-off-by: Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-9-zack@kde.org
2022-10-25drm/vmwgfx: Start diffing new mob cursors against old onesMichael Banack1-21/+74
Avoid making the SVGA device do extra work if the new cursor image matches the old one. Signed-off-by: Michael Banack <banackm@vmware.com> Signed-off-by: Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-8-zack@kde.org
2022-10-25drm/vmwgfx: Clean up cursor mobsMichael Banack1-182/+259
Clean up the cursor mob path by moving ownership of the mobs into the plane_state, and just leaving a cache of unused mobs in the plane itself. Signed-off-by: Michael Banack <banackm@vmware.com> Signed-off-by: Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-7-zack@kde.org
2022-07-26drm/atomic-helper: Remove _HELPER_ infix from DRM_PLANE_HELPER_NO_SCALINGThomas Zimmermann1-4/+4
Rename DRM_PLANE_HELPER_NO_SCALING to DRM_PLANE_NO_SCALING. The constant is not really a helper, but rather a characteristic of the plane itself. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-4-tzimmermann@suse.de
2022-07-26drm/atomic-helper: Move DRM_PLANE_HELPER_NO_SCALING to atomic helpersThomas Zimmermann1-1/+0
The macro DRM_PLANE_HELPER_NO_SCALING is only useful with the interfaces in drm_atomic_helper.h, but defined in drm_plane_helper.h. So half of DRM includes the latter header file for using this macro. Move the macro and remove the include statements. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-3-tzimmermann@suse.de
2022-07-26drm/vmwgfx: Remove trailing whitespaceThomas Zimmermann1-1/+1
Fix coding style. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-2-tzimmermann@suse.de
2022-07-05drm/vmwgfx: Stop using 'TRUE'Ville Syrjälä1-1/+1
Stop using the 'TRUE' define. This ultimately gets defined by acpi/actypes.h that gets included here via a convoluted chain of other headers. drm_crtc.h is part of that chain, and I'm trying to eliminate all unnecessary includes from it to avoid pointless rebuilds. v2: Split out from the bigger patch Cc: Zack Rusin <zackr@vmware.com> Cc: VMware Graphics Reviewers <linux-graphics-maintainer@vmware.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-2-ville.syrjala@linux.intel.com Reviewed-by: Zack Rusin <zackr@vmware.com<mailto:zackr@vmware.com>>
2022-03-21drm/vmwgfx: validate the screen formatsZack Rusin1-14/+16
The kms code wasn't validating the modifiers and was letting through unsupported formats. rgb8 was never properly supported and has no matching svga screen target format so remove it. This fixes format/modifier failures in kms_addfb_basic from IGT. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-4-zack@kde.org
2022-03-21drm/vmwgfx: Fix mob cursor allocation raceZack Rusin1-0/+8
Writes to SVGA_REG_CURSOR_MOBID did not wait for the buffers to be fully populated. This sometimes results in the device not being aware of the buffer when the cursor mob register was written. Properly wait for the buffer to be fully populated before setting it as a cursor mob. Signed-off-by: Zack Rusin <zackr@vmware.com> Fixes: 485d98d472d5 ("drm/vmwgfx: Add support for CursorMob and CursorBypass 4") Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-3-zack@kde.org
2022-03-11drm/vmwgfx: Fix fencing on SVGAv3Zack Rusin1-3/+5
Port of the vmwgfx to SVGAv3 lacked support for fencing. SVGAv3 removed FIFO's and replaced them with command buffers and extra registers. The initial version of SVGAv3 lacked support for most advanced features (e.g. 3D) which made fences unnecessary. That is no longer the case, especially as 3D support is being turned on. Switch from FIFO commands and capabilities to command buffers and extra registers to enable fences on SVGAv3. Fixes: 2cd80dbd3551 ("drm/vmwgfx: Add basic support for SVGA3") Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-5-zack@kde.org
2022-03-11drm/vmwgfx: Add support for CursorMob and CursorBypass 4Martin Krastev1-75/+324
* Add support for CursorMob * Add support for CursorBypass 4 * Refactor vmw_du_cursor_plane_atomic_update to be kms-helper-atomic -- move BO mappings to vmw_du_cursor_plane_prepare_fb -- move BO unmappings to vmw_du_cursor_plane_cleanup_fb Cursor mobs are a new svga feature which enables support for large cursors, e.g. large accessibility cursor on platforms with vmwgfx. It also cleans up the cursor code and makes it more uniform with the rest of modern guest backed objects support. Signed-off-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Signed-off-by: Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-2-zack@kde.org
2022-01-27drm/vmwgfx: Fix stale file descriptors on failed usercopyMathias Krause1-1/+1
A failing usercopy of the fence_rep object will lead to a stale entry in the file descriptor table as put_unused_fd() won't release it. This enables userland to refer to a dangling 'file' object through that still valid file descriptor, leading to all kinds of use-after-free exploitation scenarios. Fix this by deferring the call to fd_install() until after the usercopy has succeeded. Fixes: c906965dee22 ("drm/vmwgfx: Add export fence to file descriptor support") Signed-off-by: Mathias Krause <minipli@grsecurity.net> Signed-off-by: Zack Rusin <zackr@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-09drm/vmwgfx: Implement create_handle on drm_framebuffer_funcsZack Rusin1-0/+11
The fb handle code assumes it deals with GEM objects. Because vmwgfx buffer objects were not actually GEM objects we were not able to implement that interface. Now that vmwgfx supports GEM buffer objects we can trivially implement create_handle for buffer object backed framebuffers. Among others this gets IGT's kms_getfb test passing. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211206172620.3139754-6-zack@kde.org
2021-12-09drm/vmwgfx: Implement DRIVER_GEMZack Rusin1-29/+3
This is initial change adding support for DRIVER_GEM to vmwgfx. vmwgfx was written before GEM and has always used TTM. Over the years the TTM buffers started inherting from GEM objects but vmwgfx never implemented GEM making it quite awkward. We were directly setting variables in GEM objects to not make DRM crash. This change brings vmwgfx inline with other DRM drivers and allows us to use a lot of DRM helpers which have depended on drivers with GEM support. Due to historical reasons vmwgfx splits the idea of a buffer and surface which makes it a littly tricky since either one can be used in most of our ioctl's which take user space handles. For now our BO's are GEM objects and our surfaces are opaque objects which are backed by GEM objects. In the future I'd like to combine those into a single BO but we don't want to break any of our existing ioctl's so it will take time to do it in a non-destructive way. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211206172620.3139754-5-zack@kde.org
2021-12-09drm/vmwgfx: Remove the dedicated memory accountingZack Rusin1-1/+1
vmwgfx shared very elaborate memory accounting with ttm. It was moved from ttm to vmwgfx in change f07069da6b4c ("drm/ttm: move memory accounting into vmwgfx v4") but because of complexity it was hard to maintain. Some parts of the code weren't freeing memory correctly and some were missing accounting all together. While those would be fairly easy to fix the fundamental reason for memory accounting in the driver was the ability to invoke shrinker which is part of TTM code as well (with support for unified memory hopefully coming soon). That meant that vmwgfx had a lot of code that was either unused or duplicating code from TTM. Removing this code also prevents excessive calls to global swapout which were common during memory pressure because both vmwgfx and TTM would invoke the shrinker when memory usage reached half of RAM. Fixes: f07069da6b4c ("drm/ttm: move memory accounting into vmwgfx v4") Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211206172620.3139754-2-zack@kde.org
2021-10-04Revert "drm/vmwgfx: cleanup: drm_modeset_lock_all() --> ↵Sean Paul1-8/+4
DRM_MODESET_LOCK_ALL_BEGIN()" This reverts commit 6b92e77156c5adf6606c8ad825c71404417d88af. This patchset breaks on intel platforms and was previously NACK'd by Ville. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Fernando Ramos <greenfoo@u92.eu> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-12-sean@poorly.run
2021-10-01drm/vmwgfx: cleanup: drm_modeset_lock_all() --> DRM_MODESET_LOCK_ALL_BEGIN()Fernando Ramos1-4/+8
As requested in Documentation/gpu/todo.rst, replace driver calls to drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and DRM_MODESET_LOCK_ALL_END() Signed-off-by: Fernando Ramos <greenfoo@u92.eu> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-6-greenfoo@u92.eu
2021-08-09drm/vmwgfx: Make use of PFN_ALIGN/PFN_UP helper macroCai Huoqing1-1/+1
it's a refactor to make use of PFN_ALIGN/PFN_UP helper macro Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210802033308.927-1-caihuoqing@baidu.com
2021-07-28drm/vmwgfx: Cleanup loggingZack Rusin1-0/+10
The code was using the old DRM logging functions, which made it hard to figure out what was coming from vmwgfx. The newer logging helpers include the driver name in the logs and make it explicit which driver they're coming from. This allows us to standardize our logging a bit and clean it up in the process. vmwgfx is a little special because technically the hardware it's running on can be anything from the last 12 years or so which is why we need to include capabilities in the logs in the first place or otherwise we'd have no way of knowing what were the capabilities of the platform the guest was running in. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210723165153.113198-2-zackr@vmware.com
2021-06-16drm/vmwgfx: Update device headersZack Rusin1-3/+3
Historically our device headers have been forked versions of the internal device headers, this has made maintaining them a bit of a burden. To fix the situation, going forward, the device headers will be verbatim copies of the internal headers. To do that the driver code has to be adapted to use pristine device headers. This will make future update to the device headers trivial and automatic. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210615182336.995192-2-zackr@vmware.com
2021-05-11drm/vmwgfx: Add basic support for SVGA3Zack Rusin1-10/+19
SVGA3 is the next version of our PCI device. Some of the changes include using MMIO for register accesses instead of ioports, deprecating the FIFO MMIO and removing a lot of the old and legacy functionality. SVGA3 doesn't support guest backed objects right now so everything except 3D is working. v2: Fixes all the static analyzer warnings Signed-off-by: Zack Rusin <zackr@vmware.com> Cc: Martin Krastev <krastevm@vmware.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210505191007.305872-1-zackr@vmware.com
2021-05-11drm/vmwgfx: Remove the reservation semaphoreZack Rusin1-7/+0
Now since Christian reworked TTM to always keep objects on the LRU list unless they are pinned we shouldn't need the reservation semaphore. It makes the driver code a lot cleaner, especially because it was a little hard to reason when and where the reservation semaphore needed to be held. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210505035740.286923-5-zackr@vmware.com
2021-02-25drm/atomic: Pass the full state to planes atomic disable and updateMaxime Ripard1-2/+5
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert the remaining helpers to provide a consistent interface, this time with the planes atomic_update and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_disable)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier crtc_state; identifier plane, plane_state, state; expression e; @@ f(struct drm_crtc_state *crtc_state) { ... struct drm_atomic_state *state = e; <+... ( - FUNCS->atomic_disable(plane, plane_state) + FUNCS->atomic_disable(plane, state) | - FUNCS->atomic_update(plane, plane_state) + FUNCS->atomic_update(plane, state) ) ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *old_plane_state) { <... - state + old_plane_state ...> } @ ignores_old_state @ identifier plane_atomic_func.func; identifier plane, old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... when != old_state } @ adds_old_state depends on plane_atomic_func && !ignores_old_state @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *plane_state) { + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <+... - plane_state->state + state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech
2021-02-24drm: Store new plane state in a variable for atomic_update and disableMaxime Ripard1-9/+10
In order to store the new plane state in a subsequent helper, let's move the plane->state dereferences into a variable. This was done using the following coccinelle script, plus some hand changes for vmwgfx: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ has_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { + struct drm_plane_state *new_state = plane->state; <+... - plane->state + new_state ...+> } @ has_new_state_state @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { + struct drm_plane_state *new_plane_state = plane->state; <+... - plane->state + new_plane_state ...+> } @ has_new_state_old_s @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol old_s; @@ func(struct drm_plane *plane, struct drm_plane_state *old_s) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_old_s @ identifier plane_atomic_func.func; identifier plane; symbol old_s; @@ func(struct drm_plane *plane, struct drm_plane_state *old_s) { + struct drm_plane_state *new_s = plane->state; <+... - plane->state + new_s ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
2021-02-24drm: Use the state pointer directly in planes atomic_checkMaxime Ripard1-1/+1
Now that atomic_check takes the global atomic state as a parameter, we don't need to go through the pointer in the plane state. This was done using the following coccinelle script: @ plane_atomic_func @ identifier helpers; identifier func; @@ static struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... when != plane_state - plane_state->state + state ...> } @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... - plane_state->state + state ...> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-5-maxime@cerno.tech
2021-02-24drm/atomic: Pass the full state to planes atomic_checkMaxime Ripard1-2/+6
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert all the remaining helpers to provide a consistent interface, starting with the planes atomic_check. The conversion was done using the coccinelle script below plus some manual changes for vmwgfx, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... int (*atomic_check)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_check(plane, plane_state) + FUNCS->atomic_check(plane, state) ...+> } @ ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { ... when != new_plane_state } @ adds_new_state depends on plane_atomic_func && !ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *new_plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
2021-02-24drm: Rename plane atomic_check state namesMaxime Ripard1-6/+7
Most drivers call the argument to the plane atomic_check hook simply state, which is going to conflict with the global atomic state in a later rework. Let's rename it to new_plane_state (or new_state depending on the convention used in the driver). This was done using the coccinelle script below, and built tested: @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { .atomic_check = func, }; @ has_old_state @ identifier plane_atomic_func.func; identifier plane; expression e; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *old_state = e; ... } @ depends on has_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_state ) { <+... - state + new_state ...+> } @ has_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... } @ depends on has_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_plane_state ) { <+... - state + new_plane_state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-2-maxime@cerno.tech
2021-02-17drm: Switch to %p4cc format modifierSakari Ailus1-9/+6
Switch DRM drivers from drm_get_format_name() to %p4cc. This gets rid of a large number of temporary variables at the same time. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-4-sakari.ailus@linux.intel.com
2021-02-10drm/vmwgfx: Remove pointless codeZack Rusin1-4/+0
There's no need to check for the presence of the hotplug property just to return because this is the end of the function so we're returning either way. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209161700.335611-2-zackr@vmware.com
2021-02-10drm/vmwgfx: Correctly set the name of the preferred modeZack Rusin1-0/+1
Our sysfs "modes" entries were broken because our preffered mode never had its name set correctly. This resulted in the first entry simply being called "preferred" followed by a list of other resolutions. Lets fix it by actually setting the name of mode (which is its resolution). This allows one to quickly validate the modes set by the open-vm-tools. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209161700.335611-1-zackr@vmware.com
2021-02-10drm/vmwgfx: add some 16:9 / 16:10 default resolutionsRoland Scheidegger1-0/+24
The default list was old and in particular lacking all common 16:9 resolutions, as well as some newer 16:10 ones. This makes them selectable in resolution change lists, which can be quite useful (for instance in case auto-fit isn't enabled). Signed-off-by: Roland Scheidegger <sroland@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210205010446.26559-1-sroland@vmware.com
2021-01-19drm/vmwgfx/vmwgfx_kms: Update worthy function headers and demote othersLee Jones1-6/+7
Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:37: drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:483: warning: Function parameter or member 'new_state' not described in 'vmw_du_cursor_plane_atomic_check' drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:483: warning: Excess function parameter 'state' description in 'vmw_du_cursor_plane_atomic_check' drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:1069: warning: Function parameter or member 'vfb' not described in 'vmw_framebuffer_pin' drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:1281: warning: Function parameter or member 'dev_priv' not described in 'vmw_kms_srf_ok' drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:1907: warning: Function parameter or member 'crtc' not described in 'vmw_get_vblank_counter' drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:1915: warning: Function parameter or member 'crtc' not described in 'vmw_enable_vblank' drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:1923: warning: Function parameter or member 'crtc' not described in 'vmw_disable_vblank' drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:2131: warning: Function parameter or member 'mode' not described in 'vmw_guess_mode_timing' Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Roland Scheidegger <sroland@vmware.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-21-lee.jones@linaro.org
2021-01-19drm/vmwgfx/vmwgfx_kms: Remove unused variable 'ret' from ↵Lee Jones1-2/+1
'vmw_du_primary_plane_atomic_check()' Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/vmwgfx/vmwgfx_kms.c: In function ‘vmw_du_primary_plane_atomic_check’: drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:460:31: warning: variable ‘vcs’ set but not used [-Wunused-but-set-variable] Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Roland Scheidegger <sroland@vmware.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-5-lee.jones@linaro.org
2021-01-14drm/vmwgfx: Fix display register usage for some older configsZack Rusin1-1/+2
We can't be setting the display_id register to an invalid value because that makes our device reset the fb which causes nasty flicker (due to destruction and creation of a new fb). Also we can't be using the BITS_PER_PIXEL register if the 8BIT_EMULATION is not supported. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Link: https://patchwork.freedesktop.org/patch/414041/?series=85516&rev=2
2021-01-14drm/vmwgfx: Cleanup the cmd/fifo splitZack Rusin1-12/+9
Lets try to cleanup the usage of the term FIFO which we used for both our MMIO based cmd queue processing and for general command processing which could have been using command buffers interface. We're going to rename the functions which are processing commands (and work either via MMIO or command buffers) as _cmd_ and functions which operate on the MMIO based commands as FIFO to match the SVGA device naming. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/414044/?series=85516&rev=2
2021-01-14drm/vmwgfx: Cleanup fifo mmio handlingZack Rusin1-8/+6
Going forward the svga device might reuse mmio for general register accesses, in order to prepare for that we need to cleanup our naming and handling of fifo specific mmio reads and writes. As part of this work lets switch to managed mapping of the fifo mmio to make the error handling cleaner. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Link: https://patchwork.freedesktop.org/patch/414045/?series=85516&rev=2
2021-01-14drm/vmwgfx: Switch to a managed drm deviceZack Rusin1-18/+18
To cleanup some of the error handling and prepare for some other work lets switch to a managed drm device. It will let us get a better handle on some of the error paths. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Link: https://patchwork.freedesktop.org/patch/414039/?series=85516&rev=2
2020-12-14drm/ttm: cleanup BO size handling v3Christian König1-1/+1
Based on an idea from Dave, but cleaned up a bit. We had multiple fields for essentially the same thing. Now bo->base.size is the original size of the BO in arbitrary units, usually bytes. bo->mem.num_pages is the size in number of pages in the resource domain of bo->mem.mem_type. v2: use the GEM object size instead of the BO size v3: fix printks in some places Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> (v1) Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/406831/
2020-11-02drm/atomic: Pass the full state to CRTC atomic begin and flushMaxime Ripard1-2/+2
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_begin and atomic_flush. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_begin(crtc, old_crtc_state); + FUNCS->atomic_begin(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_flush(crtc, old_crtc_state); + FUNCS->atomic_flush(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_begin(crtc, crtc_state); + FUNCS->atomic_begin(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_flush(crtc, crtc_state); + FUNCS->atomic_flush(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_begin)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_begin)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_flush)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_begin = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_flush = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-2-maxime@cerno.tech
2020-11-02drm/atomic: Pass the full state to CRTC atomic_checkMaxime Ripard1-1/+3
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_check. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier ret, f; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <... - ret = FUNCS->atomic_check(crtc, crtc_state); + ret = FUNCS->atomic_check(crtc, state); ...> } @@ identifier crtc, new_state; @@ struct drm_crtc_helper_funcs { ... - int (*atomic_check)(struct drm_crtc *crtc, struct drm_crtc_state *new_state); + int (*atomic_check)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ static struct drm_crtc_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @ ignores_new_state @ identifier crtc_atomic_func.func; identifier crtc, new_state; @@ int func(struct drm_crtc *crtc, struct drm_crtc_state *new_state) { ... when != new_state } @ adds_new_state depends on crtc_atomic_func && !ignores_new_state @ identifier crtc_atomic_func.func; identifier crtc, new_state; @@ int func(struct drm_crtc *crtc, struct drm_crtc_state *new_state) { + struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ int func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ int func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier new_state; identifier crtc; @@ int func(struct drm_crtc *crtc, - struct drm_crtc_state *new_state + struct drm_atomic_state *state ) { ... } @@ identifier new_state; identifier crtc; @@ int vmw_du_crtc_atomic_check(struct drm_crtc *crtc, - struct drm_crtc_state *new_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc); ... } @@ identifier new_state; identifier crtc; @@ int vmw_du_crtc_atomic_check(struct drm_crtc *crtc, - struct drm_crtc_state *new_state + struct drm_atomic_state *state ); @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-1-maxime@cerno.tech
2020-08-11drm/vmwgfx: fix spelling mistake "Cant" -> "Can't"Colin Ian King1-1/+1
There is a spelling mistake in a DRM_ERROR message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Roland Scheidegger <sroland@vmware.com>
2020-08-11drm/vmwgfx: Fix two list_for_each loop exit testsDan Carpenter1-4/+4
These if statements are supposed to be true if we ended the list_for_each_entry() loops without hitting a break statement but they don't work. In the first loop, we increment "i" after the "if (i == unit)" condition so we don't necessarily know that "i" is not equal to unit at the end of the loop. In the second loop we exit when mode is not pointing to a valid drm_display_mode struct so it doesn't make sense to check "mode->type". Fixes: a278724aa23c ("drm/vmwgfx: Implement fbdev on kms v2") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Signed-off-by: Roland Scheidegger <sroland@vmware.com>
2020-07-02drm/vmwgfx: Use __drm_atomic_helper_crtc_resetDaniel Vetter1-2/+1
Now also comes with the added benefit of doing a drm_crtc_vblank_off(), which means vblank state isn't ill-defined and fail-y at driver load before the first modeset on each crtc. v2: Compile fix. Oops. Reviewed-by: Roland Scheidegger <sroland@vmware.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Roland Scheidegger <sroland@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200612204940.2134653-1-daniel.vetter@ffwll.ch Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-7-daniel.vetter@ffwll.ch
2020-05-27drm: Nuke mode->vrefreshVille Syrjälä1-2/+0
Get rid of mode->vrefresh and just calculate it on demand. Saves a bit of space and avoids the cached value getting out of sync with reality. Mostly done with cocci, with the following manual fixups: - Remove the now empty loop in drm_helper_probe_single_connector_modes() - Fix __MODE() macro in ch7006_mode.c - Fix DRM_MODE_ARG() macro in drm_modes.h - Remove leftover comment from samsung_s6d16d0_mode - Drop the TODO @@ @@ struct drm_display_mode { ... - int vrefresh; ... }; @@ identifier N; expression E; @@ struct drm_display_mode N = { - .vrefresh = E }; @@ identifier N; expression E; @@ struct drm_display_mode N[...] = { ..., { - .vrefresh = E } ,... }; @@ expression E; @@ { DRM_MODE(...), - .vrefresh = E, } @@ identifier M, R; @@ int drm_mode_vrefresh(const struct drm_display_mode *M) { ... - if (M->vrefresh > 0) - R = M->vrefresh; - else if (...) { ... } ... } @@ struct drm_display_mode *p; expression E; @@ ( - p->vrefresh = E; | - p->vrefresh + drm_mode_vrefresh(p) ) @@ struct drm_display_mode s; expression E; @@ ( - s.vrefresh = E; | - s.vrefresh + drm_mode_vrefresh(&s) ) @@ expression E; @@ - drm_mode_vrefresh(E) ? drm_mode_vrefresh(E) : drm_mode_vrefresh(E) + drm_mode_vrefresh(E) @find_substruct@ identifier X; identifier S; @@ struct X { ... struct drm_display_mode S; ... }; @@ identifier find_substruct.S; expression E; identifier I; @@ { .S = { - .vrefresh = E } } @@ identifier find_substruct.S; identifier find_substruct.X; expression E; identifier I; @@ struct X I[...] = { ..., .S = { - .vrefresh = E } ,... }; v2: Drop TODO v3: Rebase v4: Rebase Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-4-ville.syrjala@linux.intel.com
2020-03-23drm/vmwgfx: Refactor surface_define to use vmw_surface_metadataDeepak Rawat1-17/+10
Makes surface_define cleaner by sending vmw_surface_metadata instead of all the arguments individually. v2: fix uninitialized return value, error message Signed-off-by: Deepak Rawat <drawat.floss@gmail.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Signed-off-by: Roland Scheidegger <sroland@vmware.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-18 16:20:36 +0000