summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/tegra/gr3d.c
AgeCommit message (Collapse)AuthorFilesLines
2021-12-16drm/tegra: Consolidate runtime PM management of older UAPI codepathDmitry Osipenko1-9/+1
Move runtime PM management of older UAPI code paths into the common place. This removes boilerplate code from client drivers. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-16drm/tegra: gr3d: Support generic power domain and runtime PMDmitry Osipenko1-58/+305
Add runtime power management and support generic power domains. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-31gpu: host1x: Cleanup and refcounting for syncpointsMikko Perttunen1-2/+2
Add reference counting for allocated syncpoints to allow keeping them allocated while jobs are referencing them. Additionally, clean up various places using syncpoint IDs to use host1x_syncpt pointers instead. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-07-17drm/tegra: gr3d: Assert reset before power-gatingDmitry Osipenko1-0/+2
Tegra TRM documentation states that hardware should be in a default state when power partition is turned off, i.e. reset should be asserted. This patch adds the missing reset assertions. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-01-10gpu: host1x: Rename "parent" to "host"Thierry Reding1-2/+2
Rename the host1x clients' parent to "host" because that more closely describes what it is. The parent can be confused with the parent device in terms of the device hierarchy. Subsequent patches will add a new member that refers to the parent in that hierarchy. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-10-29drm/tegra: Simplify IOMMU group selectionThierry Reding1-1/+1
All the devices that make up the DRM device are now part of the same IOMMU group. This simplifies the handling of the IOMMU attachment and also avoids exhausting the number of IOMMUs available on early Tegra SoC generations. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-10-28drm/tegra: Move IOMMU group into host1x clientThierry Reding1-6/+4
Handling of the IOMMU group attachment is common to all clients, so move the group into the client to simplify code. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-10-28gpu: host1x: Request channels for clients, not devicesThierry Reding1-1/+1
A struct device doesn't carry much information that a channel might be interested in, but the client very much does. Request channels for the clients rather than their parent devices and store a pointer to them in order to have that information available when needed. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-18drm/tegra: gr3d: Track interface versionThierry Reding1-3/+25
Set the interface version implemented by the gr3d module. This allows userspace to pass the correct command stream when programming the gr3d module. Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-05-17drm/tegra: Refactor IOMMU attach/detachThierry Reding1-24/+7
Attaching to and detaching from an IOMMU uses the same code sequence in every driver, so factor it out into separate helpers. Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-05-17drm/tegra: gr3d: Properly clean up resourcesThierry Reding1-6/+22
Failure to register the Tegra DRM client would leak the resources. Move cleanup code to error unwinding gotos to fix that and share the cleanup code with the other error paths. Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-05-04drm/tegra: gr3d: Add IOMMU supportDmitry Osipenko1-0/+27
Attach GR3D to the displays IOMMU group in order to provide GR3D access to BO's IOVA. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-20gpu: host1x: syncpt: Request syncpoints per clientThierry Reding1-1/+1
Rather than request syncpoints for a struct device *, request them for a struct host1x_client *. This is important because subsequent patches are going to break the assumption that host1x will always be the parent for devices requesting a syncpoint. It's also a more natural choice because host1x clients are really the only ones that will know how to deal with syncpoints. Note that host1x clients are always guaranteed to be children of host1x, regardless of their location in the device tree. Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-06-15gpu: host1x: Refactor channel allocation codeMikko Perttunen1-2/+2
This is largely a rewrite of the Host1x channel allocation code, bringing several changes: - The previous code could deadlock due to an interaction between the 'reflock' mutex and CDMA timeout handling. This gets rid of the mutex. - Support for more than 32 channels, required for Tegra186 - General refactoring, including better encapsulation of channel ownership handling into channel.c Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-07drm/tegra: Fix error handlingChristophe Jaillet1-2/+2
It is likely that checking 'gr3d->clk_secondary' instead of 'gr3d->clk' is expected here. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-08-08Merge tag 'cleanup-for-3.17' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This merge window brings a good size of cleanups on various platforms. Among the bigger ones: - Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have lacked active support for quite a while, and after asking around nobody showed interest in keeping them around. If needed, they could be resurrected in the future but it's more likely that we would prefer reintroduction of them as DT and multiplatform-enabled platforms instead. - OMAP4 controller code register define diet. They defined a lot of registers that were never actually used, etc. - Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate) to drivers/soc so it can be shared with 64-bit code. This also converts them over to traditional driver models where possible. - Removal of legacy gpio-samsung driver, since the last users have been removed (moved to pinctrl) Plus a bunch of smaller changes for various platforms that sort of dissapear in the diffstat for the above. clps711x cleanups, shmobile header file refactoring/moves for multiplatform friendliness, some misc cleanups, etc" * tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits) drivers: CCI: Correct use of ! and & video: clcd-versatile: Depend on ARM video: fix up versatile CLCD helper move MAINTAINERS: Add sdhci-st file to ARCH/STI architecture ARM: EXYNOS: Fix build breakge with PM_SLEEP=n MAINTAINERS: Remove Kirkwood ARM: tegra: Convert PMC to a driver soc/tegra: fuse: Set up in early initcall ARM: tegra: Always lock the CPU reset vector ARM: tegra: Setup CPU hotplug in a pure initcall soc/tegra: Implement runtime check for Tegra SoCs soc/tegra: fuse: fix dummy functions soc/tegra: fuse: move APB DMA into Tegra20 fuse driver soc/tegra: Add efuse and apbmisc bindings soc/tegra: Add efuse driver for Tegra ARM: tegra: move fuse exports to soc/tegra/fuse.h ARM: tegra: export apb dma readl/writel ARM: tegra: Use a function to get the chip ID ARM: tegra: Sort includes alphabetically ARM: tegra: Move includes to include/soc/tegra ...
2014-08-04drm/tegra: add MODULE_DEVICE_TABLEsStephen Warren1-0/+1
When tegra-drm.ko is built as a module, these MODULE_DEVICE_TABLEs allow the module to be auto-loaded since the module will match the devices instantiated from device tree. (Notes for stable: in 3.14+, just git rm any conflicting file, since they are added in later kernels. For 3.13 and below, manual merging will be needed) Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17ARM: tegra: Convert PMC to a driverThierry Reding1-1/+1
This commit converts the PMC support code to a platform driver. Because the boot process needs to call into this driver very early, also set up a minimal environment via an early initcall. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17ARM: tegra: Move includes to include/soc/tegraThierry Reding1-1/+2
In order to not clutter the include/linux directory with SoC specific headers, move the Tegra-specific headers out into a separate directory. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-06-05drm/tegra: Remove host1x drm_bus implementationThierry Reding1-4/+4
The DRM core can now cope with drivers that don't have an associated struct drm_bus, so the host1x implementation is no longer useful. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-12-11ARM: tegra: pass reset to tegra_powergate_sequence_power_up()Stephen Warren1-2/+4
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-By: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com>
2013-12-11drm/tegra: use reset frameworkStephen Warren1-0/+16
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-By: Terje Bergstrom <tbergstrom@nvidia.com>
2013-10-31drm/tegra: Reserve syncpoint base for gr3dThierry Reding1-1/+2
Request a syncpoint base to be associated with the gr3d syncpoint. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31drm/tegra: Add 3D supportThierry Reding1-0/+337
Initialize and power the 3D unit on Tegra20, Tegra30 and Tegra114 and register a channel with the Tegra DRM driver so that the unit can be used from userspace. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-28 07:22:04 +0000