Age | Commit message (Collapse) | Author | Files | Lines |
|
Nouveau now uses drm_gem_ttm_dumb_map_offset() to implement
struct drm_driver.dumb_map_offset.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408140139.27731-4-tzimmermann@suse.de
|
|
Currently we perform both short IRQ handling for DP, and connector
reprobing in the HPD IRQ handler. However since we need to grab
connection_mutex in order to reprobe a connector, in theory we could
accidentally block ourselves from handling any short IRQs until after a
modeset completes if a connector hotplug happens to occur in parallel
with a modeset.
I haven't seen this actually happen yet, but since we're cleaning up
nouveau's hotplug handling code anyway and we already have a hpd worker,
we can simply fix this by only relying on the HPD worker to actually
reprobe connectors when we receive a HPD IRQ. We also add a mask to
nouveau_drm to keep track of which connectors are waiting to be reprobed
in response to an HPD IRQ.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-13-lyude@redhat.com
|
|
First some backstory here: Currently, we keep track of whether or not
we've enabled MST or not by trying to piggy-back off the MST helpers.
This means that in order to check whether MST is enabled or not, we
actually need to grab drm_dp_mst_topology_mgr.lock.
Back when I originally wrote this, I did this piggy-backing with the
intention that I'd eventually be teaching our MST helpers how to recover
when an MST device has stopped responding, which in turn would require
the MST helpers having a way of disabling MST independently of the
driver. Note that this was before I reworked locking in the MST helpers,
so at the time we were sticking random things under &mgr->lock - which
grabbing this lock was meant to protect against.
This never came to fruition because doing such a reset safely turned out
to be a lot more painful and impossible then it sounds, and also just
risks us working around issues with our MST handlers that should be
properly fixed instead. Even if it did though, simply calling
drm_dp_mst_topology_mgr_set_mst() from the MST helpers (with the
exception of when we're tearing down our MST managers, that's always OK)
wouldn't have been a bad idea, since drivers like nouveau and i915 need
to do their own book keeping immediately after disabling MST.
So-implementing that would likely require adding a hook for
helper-triggered MST disables anyway.
So, fast forward to now - we want to start adding support for all of the
miscellaneous bits of the DP protocol (for both SST and MST) we're
missing before moving on to supporting more complicated features like
supporting different BPP values on MST, DSC, etc. Since many of these
features only exist on SST and make use of DP HPD IRQs, we want to be
able to atomically check whether we're servicing an MST IRQ or SST IRQ
in nouveau_connector_hotplug(). Currently we literally don't do this at
all, and just handle any kind of possible DP IRQ we could get including
ESIs - even if MST isn't actually enabled.
This would be very complicated and difficult to fix if we need to hold
&mgr->lock while handling SST IRQs to ensure that the MST topology
state doesn't change under us. What we really want here is to do our own
tracking of whether MST is enabled or not, similar to drivers like i915,
and define our own locking order to decomplicate things and avoid
hitting locking issues in the future.
So, let's do this by refactoring our MST probing/enabling code to use
our own MST bookkeeping, along with adding a lock for protecting DP
state that needs to be checked outside of our connector probing
functions. While we're at it, we also remove a bunch of unneeded steps
we perform when probing/enabling MST:
* Enabling bits in MSTM_CTRL before calling drm_dp_mst_topology_mgr_set_mst().
I don't think these ever actually did anything, since the nvif methods
for enabling MST don't actually do anything DPCD related and merely
indicate to nvkm that we've turned on MST.
* Checking the MSTM_CTRL bit is intact when checking the state of an
enabled MST topology in nv50_mstm_detect(). I just added this to be safe
originally, but now that we try reading the DPCD when probing DP
connectors it shouldn't be needed as that will abort our hotplug probing
if the device was removed well before we start checking for MST..
* All of the duplicate DPCD version checks.
This leaves us with much nicer looking code, a much more sensible
locking scheme, and an easy way of checking whether MST is enabled or
not for handling DP HPD IRQs.
v2:
* Get rid of accidental newlines
v4:
* Fix uninitialized usage of mstm in nv50_mstm_detect() - thanks kernel
bot!
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-9-lyude@redhat.com
|
|
Allow setting the block layout of a nouveau FB
object using DRM format modifiers. When
specified, the format modifier block layout and
kind overrides the GEM buffer's implicit layout
and kind. The specified format modifier is
validated against the list of modifiers supported
by the target display hardware.
v2: Used Tesla family instead of NV50 chipset compare
v4: Do not cache kind, tile_mode in nouveau_framebuffer
v5: Resolved against nouveau_framebuffer cleanup
Signed-off-by: James Jones <jajones@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Advertise support for the full list of format
modifiers supported by each class of NVIDIA
desktop GPU display hardware. Stash the array
of modifiers in the nouveau_display struct for
use when validating userspace framebuffer
creation requests, which will be supportd in
a subsequent change.
Signed-off-by: James Jones <jajones@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
After its cleanup, struct nouveau_framebuffer is only a wrapper around
struct drm_framebuffer. Use the latter directly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The buffer object stored in nvbo is also available GEM object in obj[0]
of struct drm_framebuffer. Therefore remove nvbo in favor obj[0] and
replace all references accordingly. This may require an additional cast.
With this change we can already replace nouveau_user_framebuffer_destroy()
and nouveau_user_framebuffer_create_handle() with generic GEM helpers.
Calls to nouveau_framebuffer_new() receive a GEM object.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The vma field of struct nouveau_framebuffer is a special field for the
the accelerated fbdev console. Hence there's at most one single instance
for the active console. Moving it into struct nouveau_fbdev makes struct
nouveau_framebuffer slightly smaller and brings it closer to struct
drm_framebuffer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
VBLANK callbacks in struct drm_driver are deprecated in favor of
their equivalents in struct drm_crtc_funcs. Convert nouvean over.
v4:
* add argument names in function declaration
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-10-tzimmermann@suse.de
|
|
The callback struct drm_driver.get_scanout_position() is deprecated in
favor of struct drm_crtc_helper_funcs.get_scanout_position(). Convert
nouveau over.
v4:
* add argument names in function declaration
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-9-tzimmermann@suse.de
|
|
Drop the deprecated drmP.h header from nouveau_drv.h.
Fix fallout in other parts of the driver.
Build tested using allmodconfig and allyesconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The bulk SPDX addition made all these files into GPL-2.0 licensed files.
However the remainder of the project is MIT-licensed, these files
(primarily header files) were simply missing the boiler plate and got
caught up in the global update.
Fixes: b24413180f5 (License cleanup: add SPDX GPL-2.0 license identifier to files with no license)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
It has no relevance to the atomic path used by newer GPUs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
It has no relevance to the atomic path used by newer GPUs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Currently module unloading is broken in nouveau due to a rather annoying
race condition resulting from nouveau_backlight.c having gone a bit
stale over time:
[ 1960.791143] ==================================================================
[ 1960.791394] BUG: KASAN: use-after-free in nouveau_backlight_exit+0x112/0x150 [nouveau]
[ 1960.791460] Read of size 4 at addr ffff88075accf350 by task zsh/11185
[ 1960.791521]
[ 1960.791545] CPU: 7 PID: 11185 Comm: zsh Kdump: loaded Tainted: G O 4.18.0Lyude-Test+ #4
[ 1960.791580] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET79W (1.52 ) 07/13/2018
[ 1960.791628] Call Trace:
[ 1960.791680] dump_stack+0xa4/0xfd
[ 1960.791721] print_address_description+0x71/0x239
[ 1960.791833] ? nouveau_backlight_exit+0x112/0x150 [nouveau]
[ 1960.791877] kasan_report.cold.6+0x242/0x2fe
[ 1960.791919] __asan_report_load4_noabort+0x19/0x20
[ 1960.792012] nouveau_backlight_exit+0x112/0x150 [nouveau]
[ 1960.792081] nouveau_display_destroy+0x76/0x150 [nouveau]
[ 1960.792150] nouveau_drm_device_fini+0xb7/0x190 [nouveau]
[ 1960.792265] nouveau_drm_device_remove+0x14b/0x1d0 [nouveau]
[ 1960.792347] ? nouveau_cli_work_queue+0x2e0/0x2e0 [nouveau]
[ 1960.792378] ? trace_hardirqs_on_caller+0x38b/0x570
[ 1960.792406] ? trace_hardirqs_on+0xd/0x10
[ 1960.792472] nouveau_drm_remove+0x37/0x50 [nouveau]
[ 1960.792502] pci_device_remove+0x112/0x2d0
[ 1960.792530] ? pcibios_free_irq+0x10/0x10
[ 1960.792558] ? kasan_check_write+0x14/0x20
[ 1960.792587] device_release_driver_internal+0x35c/0x650
[ 1960.792617] device_release_driver+0x12/0x20
[ 1960.792643] pci_stop_bus_device+0x172/0x1e0
[ 1960.792671] pci_stop_and_remove_bus_device_locked+0x1a/0x30
[ 1960.792715] remove_store+0xcb/0xe0
[ 1960.792753] ? sriov_numvfs_store+0x2e0/0x2e0
[ 1960.792779] ? __lock_is_held+0xb5/0x140
[ 1960.792808] ? component_add+0x530/0x530
[ 1960.792834] dev_attr_store+0x3f/0x70
[ 1960.792859] ? sysfs_file_ops+0x11d/0x170
[ 1960.792885] sysfs_kf_write+0x104/0x150
[ 1960.792915] ? sysfs_file_ops+0x170/0x170
[ 1960.792940] kernfs_fop_write+0x24f/0x400
[ 1960.792978] ? __lock_acquire+0x6ea/0x47f0
[ 1960.793021] __vfs_write+0xeb/0x760
[ 1960.793048] ? kernel_read+0x130/0x130
[ 1960.793076] ? __lock_is_held+0xb5/0x140
[ 1960.793107] ? rcu_read_lock_sched_held+0xdd/0x110
[ 1960.793135] ? rcu_sync_lockdep_assert+0x78/0xb0
[ 1960.793162] ? __sb_start_write+0x183/0x220
[ 1960.793189] vfs_write+0x14d/0x4a0
[ 1960.793229] ksys_write+0xd2/0x1b0
[ 1960.793255] ? __ia32_sys_read+0xb0/0xb0
[ 1960.793298] ? fput+0x1d/0x120
[ 1960.793324] ? filp_close+0xf3/0x130
[ 1960.793349] ? entry_SYSCALL_64_after_hwframe+0x59/0xbe
[ 1960.793380] __x64_sys_write+0x73/0xb0
[ 1960.793407] do_syscall_64+0xaa/0x400
[ 1960.793433] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1960.793460] RIP: 0033:0x7f59df433164
[ 1960.793486] Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 81 38 2d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53
[ 1960.793541] RSP: 002b:00007ffd70ee2fb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 1960.793576] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f59df433164
[ 1960.793620] RDX: 0000000000000002 RSI: 00005578088640c0 RDI: 0000000000000001
[ 1960.793665] RBP: 00005578088640c0 R08: 00007f59df7038c0 R09: 00007f59e0995b80
[ 1960.793696] R10: 000000000000000a R11: 0000000000000246 R12: 00007f59df702760
[ 1960.793730] R13: 0000000000000002 R14: 00007f59df6fd760 R15: 0000000000000002
[ 1960.793768]
[ 1960.793790] Allocated by task 11167:
[ 1960.793816] save_stack+0x43/0xd0
[ 1960.793841] kasan_kmalloc+0xc4/0xe0
[ 1960.793880] kasan_slab_alloc+0x11/0x20
[ 1960.793905] kmem_cache_alloc+0xd7/0x270
[ 1960.793944] getname_flags+0xbd/0x520
[ 1960.793969] user_path_at_empty+0x23/0x50
[ 1960.793994] do_faccessat+0x1fc/0x5d0
[ 1960.794018] __x64_sys_access+0x59/0x80
[ 1960.794043] do_syscall_64+0xaa/0x400
[ 1960.794067] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1960.794093]
[ 1960.794127] Freed by task 11167:
[ 1960.794152] save_stack+0x43/0xd0
[ 1960.794190] __kasan_slab_free+0x139/0x190
[ 1960.794215] kasan_slab_free+0xe/0x10
[ 1960.794239] kmem_cache_free+0xcb/0x2c0
[ 1960.794264] putname+0xad/0xe0
[ 1960.794287] filename_lookup.part.59+0x1f1/0x360
[ 1960.794313] user_path_at_empty+0x3e/0x50
[ 1960.794338] do_faccessat+0x1fc/0x5d0
[ 1960.794362] __x64_sys_access+0x59/0x80
[ 1960.794393] do_syscall_64+0xaa/0x400
[ 1960.794421] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1960.794461]
[ 1960.794483] The buggy address belongs to the object at ffff88075acceac0
[ 1960.794483] which belongs to the cache names_cache of size 4096
[ 1960.794540] The buggy address is located 2192 bytes inside of
[ 1960.794540] 4096-byte region [ffff88075acceac0, ffff88075accfac0)
[ 1960.794581] The buggy address belongs to the page:
[ 1960.794609] page:ffffea001d6b3200 count:1 mapcount:0 mapping:ffff880778e4b1c0 index:0x0 compound_mapcount: 0
[ 1960.794651] flags: 0x8000000000008100(slab|head)
[ 1960.794679] raw: 8000000000008100 ffffea001d39e808 ffffea001d39ea08 ffff880778e4b1c0
[ 1960.794739] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[ 1960.794785] page dumped because: kasan: bad access detected
[ 1960.794813]
[ 1960.794834] Memory state around the buggy address:
[ 1960.794861] ffff88075accf200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1960.794894] ffff88075accf280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1960.794925] >ffff88075accf300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1960.794956] ^
[ 1960.794985] ffff88075accf380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1960.795017] ffff88075accf400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1960.795061] ==================================================================
[ 1960.795106] Disabling lock debugging due to kernel taint
[ 1960.795131] ------------[ cut here ]------------
[ 1960.795148] ida_remove called for id=1802201963 which is not allocated.
[ 1960.795193] WARNING: CPU: 7 PID: 11185 at lib/idr.c:521 ida_remove+0x184/0x210
[ 1960.795213] Modules linked in: nouveau(O) mxm_wmi ttm i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm joydev vfat fat intel_rapl x86_pkg_temp_thermal coretemp crc32_pclmul iTCO_wdt psmouse wmi_bmof mei_me tpm_tis mei tpm_tis_core tpm i2c_i801 thinkpad_acpi pcc_cpufreq crc32c_intel serio_raw xhci_pci xhci_hcd wmi video i2c_dev i2c_core
[ 1960.795305] CPU: 7 PID: 11185 Comm: zsh Kdump: loaded Tainted: G B O 4.18.0Lyude-Test+ #4
[ 1960.795330] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET79W (1.52 ) 07/13/2018
[ 1960.795352] RIP: 0010:ida_remove+0x184/0x210
[ 1960.795370] Code: 4c 89 f7 e8 ae c8 00 00 eb 22 41 83 c4 02 4c 89 e8 41 83 fc 3f 0f 86 64 ff ff ff 44 89 fe 48 c7 c7 20 94 1e 83 e8 54 ed 81 fe <0f> 0b 48 b8 00 00 00 00 00 fc ff df 48 01 c3 c7 03 00 00 00 00 c7
[ 1960.795402] RSP: 0018:ffff88074d4df7b8 EFLAGS: 00010082
[ 1960.795421] RAX: 0000000000000000 RBX: 1ffff100e9a9befa RCX: ffffffff81479975
[ 1960.795440] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88077c1de690
[ 1960.795460] RBP: ffff88074d4df878 R08: ffffed00ef83bcd3 R09: ffffed00ef83bcd2
[ 1960.795479] R10: ffffed00ef83bcd2 R11: ffff88077c1de697 R12: 000000000000036b
[ 1960.795498] R13: 0000000000000202 R14: ffffffffa0aa7fa0 R15: 000000006b6b6b6b
[ 1960.795518] FS: 00007f59e0995b80(0000) GS:ffff88077c1c0000(0000) knlGS:0000000000000000
[ 1960.795553] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1960.795571] CR2: 00007f59e09a2010 CR3: 00000004a1a70005 CR4: 00000000003606e0
[ 1960.795596] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1960.795629] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1960.795649] Call Trace:
[ 1960.795667] ? ida_destroy+0x1d0/0x1d0
[ 1960.795686] ? kasan_check_write+0x14/0x20
[ 1960.795704] ? do_raw_spin_lock+0xc2/0x1c0
[ 1960.795724] ida_simple_remove+0x26/0x40
[ 1960.795794] nouveau_backlight_exit+0x9d/0x150 [nouveau]
[ 1960.795867] nouveau_display_destroy+0x76/0x150 [nouveau]
[ 1960.795930] nouveau_drm_device_fini+0xb7/0x190 [nouveau]
[ 1960.795989] nouveau_drm_device_remove+0x14b/0x1d0 [nouveau]
[ 1960.796047] ? nouveau_cli_work_queue+0x2e0/0x2e0 [nouveau]
[ 1960.796067] ? trace_hardirqs_on_caller+0x38b/0x570
[ 1960.796089] ? trace_hardirqs_on+0xd/0x10
[ 1960.796146] nouveau_drm_remove+0x37/0x50 [nouveau]
[ 1960.796167] pci_device_remove+0x112/0x2d0
[ 1960.796186] ? pcibios_free_irq+0x10/0x10
[ 1960.796218] ? kasan_check_write+0x14/0x20
[ 1960.796237] device_release_driver_internal+0x35c/0x650
[ 1960.796257] device_release_driver+0x12/0x20
[ 1960.796289] pci_stop_bus_device+0x172/0x1e0
[ 1960.796308] pci_stop_and_remove_bus_device_locked+0x1a/0x30
[ 1960.796328] remove_store+0xcb/0xe0
[ 1960.796345] ? sriov_numvfs_store+0x2e0/0x2e0
[ 1960.796364] ? __lock_is_held+0xb5/0x140
[ 1960.796383] ? component_add+0x530/0x530
[ 1960.796401] dev_attr_store+0x3f/0x70
[ 1960.796419] ? sysfs_file_ops+0x11d/0x170
[ 1960.796436] sysfs_kf_write+0x104/0x150
[ 1960.796454] ? sysfs_file_ops+0x170/0x170
[ 1960.796471] kernfs_fop_write+0x24f/0x400
[ 1960.796488] ? __lock_acquire+0x6ea/0x47f0
[ 1960.796520] __vfs_write+0xeb/0x760
[ 1960.796538] ? kernel_read+0x130/0x130
[ 1960.796556] ? __lock_is_held+0xb5/0x140
[ 1960.796590] ? rcu_read_lock_sched_held+0xdd/0x110
[ 1960.796608] ? rcu_sync_lockdep_assert+0x78/0xb0
[ 1960.796626] ? __sb_start_write+0x183/0x220
[ 1960.796648] vfs_write+0x14d/0x4a0
[ 1960.796666] ksys_write+0xd2/0x1b0
[ 1960.796684] ? __ia32_sys_read+0xb0/0xb0
[ 1960.796701] ? fput+0x1d/0x120
[ 1960.796732] ? filp_close+0xf3/0x130
[ 1960.796749] ? entry_SYSCALL_64_after_hwframe+0x59/0xbe
[ 1960.796768] __x64_sys_write+0x73/0xb0
[ 1960.796800] do_syscall_64+0xaa/0x400
[ 1960.796818] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1960.796836] RIP: 0033:0x7f59df433164
[ 1960.796854] Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 81 38 2d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53
[ 1960.796884] RSP: 002b:00007ffd70ee2fb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 1960.796906] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f59df433164
[ 1960.796926] RDX: 0000000000000002 RSI: 00005578088640c0 RDI: 0000000000000001
[ 1960.796946] RBP: 00005578088640c0 R08: 00007f59df7038c0 R09: 00007f59e0995b80
[ 1960.796966] R10: 000000000000000a R11: 0000000000000246 R12: 00007f59df702760
[ 1960.796985] R13: 0000000000000002 R14: 00007f59df6fd760 R15: 0000000000000002
[ 1960.797008] irq event stamp: 509990
[ 1960.797026] hardirqs last enabled at (509989): [<ffffffff8119ff78>] flush_work+0x4b8/0x6d0
[ 1960.797063] hardirqs last disabled at (509990): [<ffffffff8297c395>] _raw_spin_lock_irqsave+0x25/0x60
[ 1960.797085] softirqs last enabled at (509744): [<ffffffff82c005ad>] __do_softirq+0x5ad/0x8c0
[ 1960.797121] softirqs last disabled at (509735): [<ffffffff8115aa15>] irq_exit+0x1a5/0x1e0
[ 1960.797142] ---[ end trace fb1342325f1846b8 ]---
While I haven't actually gone into the details of what's causing this to
happen (maybe the kernel removes the backlight device in the device core
before we get to it?), it doesn't really matter anyway because the way
nouveau handles backlights has long since been deprecated.
According to the documentation on the drm_connector->late_register()
hook, the ->late_register() hook should be used for adding extra
connector-related devices. Vice versa, the ->early_unregister() hook is
meant to be used for removing those devices.
So: gut nouveau_drm->bl_list and nouveau_drm->backlight, and replace
them with per-connector backlight structures. Additionally, move
backlight registration/teardown into the ->late_register() and
->early_unregister() hooks so that DRM can give us a chance to remove
the backlight before the connector is even removed. This appears to fix
the problem once and for all.
Changes since v2:
- Use NV_INFO_ONCE for printing GMUX information, since otherwise this
will end up printing that message for as many times as we have
connectors
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Currently, there's nothing in nouveau that actually cancels this work
struct. So, cancel it on suspend/unload. Otherwise, if we're unlucky
enough hpd_work might try to keep running up until the system is
suspended.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This function is useful outside of DRM code.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Pull drm updates from Dave Airlie:
"This is the main drm pull request for v4.15.
Core:
- Atomic object lifetime fixes
- Atomic iterator improvements
- Sparse/smatch fixes
- Legacy kms ioctls to be interruptible
- EDID override improvements
- fb/gem helper cleanups
- Simple outreachy patches
- Documentation improvements
- Fix dma-buf rcu races
- DRM mode object leasing for improving VR use cases.
- vgaarb improvements for non-x86 platforms.
New driver:
- tve200: Faraday Technology TVE200 block.
This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in
the StorLink SL3516 (later Cortina Systems CS3516) as well as the
Grain Media GM8180.
New bridges:
- SiI9234 support
New panels:
- S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba
LT089AC19000, Innolux AT043TN24
i915:
- Remove Coffeelake from alpha support
- Cannonlake workarounds
- Infoframe refactoring for DisplayPort
- VBT updates
- DisplayPort vswing/emph/buffer translation refactoring
- CCS fixes
- Restore GPU clock boost on missed vblanks
- Scatter list updates for userptr allocations
- Gen9+ transition watermarks
- Display IPC (Isochronous Priority Control)
- Private PAT management
- GVT: improved error handling and pci config sanitizing
- Execlist refactoring
- Transparent Huge Page support
- User defined priorities support
- HuC/GuC firmware refactoring
- DP MST fixes
- eDP power sequencing fixes
- Use RCU instead of stop_machine
- PSR state tracking support
- Eviction fixes
- BDW DP aux channel timeout fixes
- LSPCON fixes
- Cannonlake PLL fixes
amdgpu:
- Per VM BO support
- Powerplay cleanups
- CI powerplay support
- PASID mgr for kfd
- SR-IOV fixes
- initial GPU reset for vega10
- Prime mmap support
- TTM updates
- Clock query interface for Raven
- Fence to handle ioctl
- UVD encode ring support on Polaris
- Transparent huge page DMA support
- Compute LRU pipe tweaks
- BO flag to allow buffers to opt out of implicit sync
- CTX priority setting API
- VRAM lost infrastructure plumbing
qxl:
- fix flicker since atomic rework
amdkfd:
- Further improvements from internal AMD tree
- Usermode events
- Drop radeon support
nouveau:
- Pascal temperature sensor support
- Improved BAR2 handling
- MMU rework to support Pascal MMU
exynos:
- Improved HDMI/mixer support
- HDMI audio interface support
tegra:
- Prep work for tegra186
- Cleanup/fixes
msm:
- Preemption support for a5xx
- Display fixes for 8x96 (snapdragon 820)
- Async cursor plane fixes
- FW loading rework
- GPU debugging improvements
vc4:
- Prep for DSI panels
- fix T-format tiling scanout
- New madvise ioctl
Rockchip:
- LVDS support
omapdrm:
- omap4 HDMI CEC support
etnaviv:
- GPU performance counters groundwork
sun4i:
- refactor driver load + TCON backend
- HDMI improvements
- A31 support
- Misc fixes
udl:
- Probe/EDID read fixes.
tilcdc:
- Misc fixes.
pl111:
- Support more variants
adv7511:
- Improve EDID handling.
- HDMI CEC support
sii8620:
- Add remote control support"
* tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits)
drm/rockchip: analogix_dp: Use mutex rather than spinlock
drm/mode_object: fix documentation for object lookups.
drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
drm/i915: Move init_clock_gating() back to where it was
drm/i915: Prune the reservation shared fence array
drm/i915: Idle the GPU before shinking everything
drm/i915: Lock llist_del_first() vs llist_del_all()
drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
drm/i915: Disable lazy PPGTT page table optimization for vGPU
drm/i915/execlists: Remove the priority "optimisation"
drm/i915: Filter out spurious execlists context-switch interrupts
drm/amdgpu: use irq-safe lock for kiq->ring_lock
drm/amdgpu: bypass lru touch for KIQ ring submission
drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories()
drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs()
drm/amd/powerplay: initialize a variable before using it
drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels
drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition
drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug
drm/rockchip: add CONFIG_OF dependency for lvds
...
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
If we restrict this helper to only kms drivers (which is the case) we
can look up the correct mode easily ourselves. But it's a bit tricky:
- All legacy drivers look at crtc->hwmode. But that is updated already
at the beginning of the modeset helper, which means when we disable
a pipe. Hence the final timestamps might be a bit off. But since
this is an existing bug I'm not going to change it, but just try to
be bug-for-bug compatible with the current code. This only applies
to radeon&amdgpu.
- i915 tries to get it perfect by updating crtc->hwmode when the pipe
is off (i.e. vblank->enabled = false).
- All other atomic drivers look at crtc->state->adjusted_mode. Those
that look at state->requested_mode simply don't adjust their mode,
so it's the same. That has two problems: Accessing crtc->state from
interrupt handling code is unsafe, and it's updated before we shut
down the pipe. For nonblocking modesets it's even worse.
For atomic drivers try to implement what i915 does. To do that we add
a new hwmode field to the vblank structure, and update it from
drm_calc_timestamping_constants(). For atomic drivers that's called
from the right spot by the helper library already, so all fine. But
for safety let's enforce that.
For legacy driver this function is only called at the end (oh the
fun), which is broken, so again let's not bother and just stay
bug-for-bug compatible.
The benefit is that we can use drm_calc_vbltimestamp_from_scanoutpos
directly to implement ->get_vblank_timestamp in every driver, deleting
a lot of code.
v2: Completely new approach, trying to mimick the i915 solution.
v3: Fixup kerneldoc.
v4: Drop the WARN_ON to check that the vblank is off, atomic helpers
currently unconditionally call this. Recomputing the same stuff should
be harmless.
v5: Fix typos and move misplaced hunks to the right patches (Neil).
v6: Undo hunk movement (kbuild).
Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-4-daniel.vetter@ffwll.ch
|
|
It's overkill to have a flag parameter which is essentially used just
as a boolean. This takes care of core + adjusting drivers.
Adjusting the scanout position callback is a bit harder, since radeon
also supplies it's own driver-private flags in there.
v2: Fixup misplaced hunks (Neil).
v3: kbuild says v1 was better ...
Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-2-daniel.vetter@ffwll.ch
|
|
There's really no reason for anything more:
- Calling this while the crtc vblank stuff isn't set up is a driver
bug. Those places alrready DRM_ERROR.
- Calling this when the crtc is off is either a driver bug (calling
drm_crtc_handle_vblank at the wrong time) or a core bug (for
anything else). Again, we DRM_ERROR.
- EINVAL is checked at higher levels already, and if we'd use struct
drm_crtc * instead of (dev, pipe) it would be real obvious that
those are again core bugs.
The only valid failure mode is crap hardware that couldn't sample a
useful timestamp, to ask the core to just grab a not-so-accurate
timestamp. Bool is perfectly fine for that.
v2: Also fix up the one caller, I lost that in the shuffling (Jani).
v3: Fixup commit message (Neil).
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-1-daniel.vetter@ffwll.ch
|
|
Surprisingly a lot of legacy drivers roll their own, for
runtime pm and because vmwgfx.
Also make nouveau's set_config static while at it.
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-19-daniel.vetter@ffwll.ch
|
|
Again just going through the motions, no functional changes in here.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>t
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-12-daniel.vetter@ffwll.ch
|
|
Currently, every backlight interface created by Nouveau uses the same name,
nv_backlight. This leads to a sysfs warning as it tries to create an already
existing folder. This patch adds a incremented number to the name, but keeps
the initial name as nv_backlight, to avoid possibly breaking userspace; the
second interface will be named nv_backlight1, and so on.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86539
v2:
* Switch to using ida for generating unique IDs, as suggested by Ilia Mirkin;
* Allocate backlight name on the stack, as suggested by Ilia Mirkin;
* Move `nouveau_get_backlight_name()` to avoid forward declaration, as
suggested by Ilia Mirkin;
* Fix reference to bug report formatting, as reported by Nick Tenney.
v3:
* Define a macro for the size of the backlight name, to avoid defining
it multiple times;
* Use snprintf in place of sprintf.
v4:
* Do not create similarly named interfaces when reaching the maximum
amount of unique names, but fail instead, as pointed out by Lukas Wunner
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This is now handled by prepare_fb(). Legacy flips were the last user.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This commit implements the atomic commit interfaces, and implements the
legacy modeset and page flipping interfaces on top of them.
There's two major changes in behavior from before:
- We're now making use of interlocks between core and satellite EVO
channels, which greatly improves our ability to keep their states
synchronised.
- DPMS is now implemented as a full modeset to either tear down the
entire pipe (or bring it back up). This choice was made mostly
to ease the initial implementation, but I'm also not sure what we
gain by bring backing the old behaviour. We shall see.
This does NOT currently expose the atomic ioctl by default, due to
limited testing having been performed.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This is different from the equivilant functions in the atomic helpers in
that we fully disable the pipe instead of just setting it to inactive.
We do this (primarily) to ensure the framebuffer cleanup paths are hit,
allowing buffers to be un-pinned from memory so they can be evicted to
system memory and not lose their contents while suspended.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
nouveau_display_fini() is responsible for quiescing the hardware, so
this is where such actions belong.
More than that, nouveau_display_fini() switches off the receiving of
sink irqs, which MST will require while shutting down an active head.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Replace the legacy drm_send_vblank_event(), drm_arm_vblank_event() and
drm_vblank_{get,put}() with the new helper functions.
v2: add crtc to nouveau_page_flip_state (comment from Mario Kleiner)
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-1-git-send-email-gustavo@padovan.org
|
|
Fixes out-of-tree build issue where uapi/drm/nouveau_drm.h gets picked
up instead.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Drivers shouldn't clobber the passed in addfb ioctl parameters.
i915 was doing just that. To prevent it from happening again,
pass the struct around as const, starting all the way from
internal_framebuffer_create().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This continues the pattern started in commit cc1ef118fc09 ("drm/irq:
Make pipe unsigned and name consistent"). This is applied to the public
APIs and driver callbacks, so pretty much all drivers need to be updated
to match the new prototypes.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Jianwei Wang <jianwei.wang.chn@gmail.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
linedur_ns, and especially pixeldur_ns are becoming rather inaccurate
to be used for the vblank timestamp correction. With 4k@60 the pixel
duration is already below 2ns, so the amount of error due to the
truncation to nanoseconds is introducing quite a bit of error.
We can avoid such problems if we instead calculate the timestamp
delta_ns directly from the dislay timings, avoiding the use of
these intermediate truncated values.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Squash in fixup from Thierry Reding for amdgpu.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Linus commit 05c63c2ff23a80b654d6c088ac3ba21628db0173 modified the
runtime suspend/resume paths to skip over display-related tasks to
avoid locking issues on resume.
Unfortunately, this resulted in the display hardware being left in
a partially initialised state, preventing subsequent modesets from
completing.
This commit unifies the (many) suspend/resume paths, bringing back
display (and fbcon) handling in the runtime paths.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This is a necessary step towards being able to work with the insane locking
requirements of the DRM core's vblank routines, and a nice cleanup as a
side-effect.
This is similar in spirit to the interfaces that Peter Hurley arrived at
with his nouveau_event rcu conversion series.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This lets drivers see the flags requested by the application
[airlied: fixup for rcar/imx/msm]
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
|
|
This hooks nouveau up to the runtime PM system to enable
dynamic power management for secondary GPUs in switchable
and optimus laptops.
a) rewrite suspend/resume printks to hide them during dynamic s/r
to avoid cluttering logs
b) add runtime pm suspend to irq handler, crtc display, ioctl handler,
connector status,
c) handle hdmi audio dynamic power on/off using magic register.
v0.5:
make sure we hit D3 properly
fix fbdev_set_suspend locking interaction, we only will poweroff if we have no
active crtcs/fbcon anyways.
add reference for active crtcs.
sprinkle mark last busy for autosuspend timeout
v0.6:
allow more flexible debugging - to avoid log spam
add option to enable/disable dynpm
got to D3Cold
v0.7:
add hdmi audio support.
v0.8:
call autosuspend from idle, so pci config space access doesn't go straight
back to sleep, this makes starting X faster.
only signal usage if we actually handle the irq, otherwise usb keeps us awake.
fix nv50 display active powerdown
v0.9:
use masking function to enable hdmi audio
set busy when we fail to suspend
Signed-off-by: Dave Airlie <airlied@redhat.com>
|