summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/exynos/exynos7_drm_decon.c
AgeCommit message (Collapse)AuthorFilesLines
2022-07-12drm/exynos/exynos7_drm_decon: free resources when clk_set_parent() failed.Jian Zhang1-4/+13
In exynos7_decon_resume, When it fails, we must use clk_disable_unprepare() to free resource that have been used. Fixes: 6f83d20838c09 ("drm/exynos: use DRM_DEV_ERROR to print out error message") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jian Zhang <zhangjian210@huawei.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2022-06-20drm: Drop drm_framebuffer.h from drm_crtc.hVille Syrjälä1-0/+1
drm_crtc.h has no need for drm_frambuffer.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_framebuffer.h. Quite a few placs do currently depend on drm_framebuffer.h without actually including it directly. All of those need to be fixed up. v2: Fix up msm some more v2: Deal with ingenic and shmobile as well Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-02-25drm/exynos/exynos7_drm_decon: Use platform_get_irq_byname() to get the interruptLad Prabhakar1-9/+3
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_byname(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2021-06-11drm/exynos: use pm_runtime_resume_and_get()Inki Dae1-1/+6
Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync() to deal with usage counter. pm_runtime_get_sync() increases the usage counter even when it failed, which makes callers to forget to decrease the usage counter and resulted in reference leak. pm_runtime_resume_and_get() function decreases the usage counter when it failed internally so it can avoid the reference leak. Changelog v1: - Fix an build error reported by kernel test robot of Intel. Signed-off-by: Inki Dae <inki.dae@samsung.com> Reported-by: kernel test robot <lkp@intel.com>
2021-06-03drm/exynos/exynos7_drm_decon: Fix incorrect naming of ↵Lee Jones1-1/+1
'decon_shadow_protect_win()' Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/exynos/exynos7_drm_decon.c:355: warning: expecting prototype for shadow_protect_win(). Prototype was for decon_shadow_protect_win() instead Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: Akshu Agarwal <akshua@gmail.com> Cc: Ajay Kumar <ajaykumar.rs@samsung.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-24-lee.jones@linaro.org
2020-11-17drm/exynos/exynos7_drm_decon: Supply missing description for param 'ctx'Lee Jones1-0/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/exynos/exynos7_drm_decon.c:354: warning: Function parameter or member 'ctx' not described in 'decon_shadow_protect_win' Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Akshu Agarwal <akshua@gmail.com> Cc: Ajay Kumar <ajaykumar.rs@samsung.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-5-lee.jones@linaro.org
2020-03-31Merge v5.6 into drm-nextDave Airlie1-2/+3
msm needed rc6, so I just went and merged release (msm has been in drm-next outside of this tree) Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-03-18drm/exynos: Use mode->clock instead of reverse calculating it from the vrefreshVille Syrjälä1-1/+1
htotal*vtotal*vrefresh ~= clock. So just use say "clock" when we mean it. Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2020-03-10drm/exynos: Fix cleanup of IOMMU related objectsMarek Szyprowski1-2/+3
Store the IOMMU mapping created by the device core of each Exynos DRM sub-device and restore it when the Exynos DRM driver is unbound. This fixes IOMMU initialization failure for the second time when a deferred probe is triggered from the bind() callback of master's compound DRM driver. This also fixes the following issue found using kmemleak detector: unreferenced object 0xc2137640 (size 64): comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s) hex dump (first 32 bytes): 50 a3 14 c2 80 a2 14 c2 01 00 00 00 20 00 00 00 P........... ... 00 10 00 00 00 80 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<3acd268d>] arch_setup_dma_ops+0x4c/0x104 [<9f7d2cce>] of_dma_configure+0x19c/0x3a4 [<ba07704b>] really_probe+0xb0/0x47c [<4f510e4f>] driver_probe_device+0x78/0x1c4 [<7481a0cf>] device_driver_attach+0x58/0x60 [<0ff8f5c1>] __driver_attach+0xb8/0x158 [<86006144>] bus_for_each_dev+0x74/0xb4 [<10159dca>] bus_add_driver+0x1c0/0x200 [<8a265265>] driver_register+0x74/0x108 [<e0f3451a>] exynos_drm_init+0xb0/0x134 [<db3fc7ba>] do_one_initcall+0x90/0x458 [<6da35917>] kernel_init_freeable+0x188/0x200 [<db3f74d4>] kernel_init+0x8/0x110 [<1f3cddf9>] ret_from_fork+0x14/0x20 [<8cd12507>] 0x0 unreferenced object 0xc214a280 (size 128): comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s) hex dump (first 32 bytes): 00 a0 ec ed 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<3acd268d>] arch_setup_dma_ops+0x4c/0x104 [<9f7d2cce>] of_dma_configure+0x19c/0x3a4 [<ba07704b>] really_probe+0xb0/0x47c [<4f510e4f>] driver_probe_device+0x78/0x1c4 [<7481a0cf>] device_driver_attach+0x58/0x60 [<0ff8f5c1>] __driver_attach+0xb8/0x158 [<86006144>] bus_for_each_dev+0x74/0xb4 [<10159dca>] bus_add_driver+0x1c0/0x200 [<8a265265>] driver_register+0x74/0x108 [<e0f3451a>] exynos_drm_init+0xb0/0x134 [<db3fc7ba>] do_one_initcall+0x90/0x458 [<6da35917>] kernel_init_freeable+0x188/0x200 [<db3f74d4>] kernel_init+0x8/0x110 [<1f3cddf9>] ret_from_fork+0x14/0x20 [<8cd12507>] 0x0 unreferenced object 0xedeca000 (size 4096): comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<3acd268d>] arch_setup_dma_ops+0x4c/0x104 [<9f7d2cce>] of_dma_configure+0x19c/0x3a4 [<ba07704b>] really_probe+0xb0/0x47c [<4f510e4f>] driver_probe_device+0x78/0x1c4 [<7481a0cf>] device_driver_attach+0x58/0x60 [<0ff8f5c1>] __driver_attach+0xb8/0x158 [<86006144>] bus_for_each_dev+0x74/0xb4 [<10159dca>] bus_add_driver+0x1c0/0x200 [<8a265265>] driver_register+0x74/0x108 [<e0f3451a>] exynos_drm_init+0xb0/0x134 [<db3fc7ba>] do_one_initcall+0x90/0x458 [<6da35917>] kernel_init_freeable+0x188/0x200 [<db3f74d4>] kernel_init+0x8/0x110 [<1f3cddf9>] ret_from_fork+0x14/0x20 [<8cd12507>] 0x0 unreferenced object 0xc214a300 (size 128): comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s) hex dump (first 32 bytes): 00 a3 14 c2 00 a3 14 c2 00 40 18 c2 00 80 18 c2 .........@...... 02 00 02 00 ad 4e ad de ff ff ff ff ff ff ff ff .....N.......... backtrace: [<08cbd8bc>] iommu_domain_alloc+0x24/0x50 [<b835abee>] arm_iommu_create_mapping+0xe4/0x134 [<3acd268d>] arch_setup_dma_ops+0x4c/0x104 [<9f7d2cce>] of_dma_configure+0x19c/0x3a4 [<ba07704b>] really_probe+0xb0/0x47c [<4f510e4f>] driver_probe_device+0x78/0x1c4 [<7481a0cf>] device_driver_attach+0x58/0x60 [<0ff8f5c1>] __driver_attach+0xb8/0x158 [<86006144>] bus_for_each_dev+0x74/0xb4 [<10159dca>] bus_add_driver+0x1c0/0x200 [<8a265265>] driver_register+0x74/0x108 [<e0f3451a>] exynos_drm_init+0xb0/0x134 [<db3fc7ba>] do_one_initcall+0x90/0x458 [<6da35917>] kernel_init_freeable+0x188/0x200 [<db3f74d4>] kernel_init+0x8/0x110 [<1f3cddf9>] ret_from_fork+0x14/0x20 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2020-01-21drm/exynos: change callback namesInki Dae1-5/+5
This patch changes Exynos specific 'disable' and 'enable' callback names to 'atomic_disable/enable' for the consistency. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2019-06-27drm/exynos: drop drmP.h usageSam Ravnborg1-3/+5
Drop use of the deprecated drmP.h file. Replace with forwards / externals as appropriate. While touching the list of include files divide them up in blocks and sort them. v3: - fix build errors in exynos_drm_g2d.c (Inki Dae) The exynos_drm_g2d.c file is not built in the standard configurations and was therefore missed. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Jingoo Han <jingoohan1@gmail.com> Fixed merge conflict. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-6/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-24drm/exynos: use DRM_DEV_DEBUG* instead of DRM_DEBUG macroInki Dae1-5/+5
Use DRM_DEV_DEBUG* instead of DRM_DEBUG macro to print out debug messages. This patch just cleans up the use of debug log macro, which changes the log macro to DRM_DEV_DEBUG*. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2019-04-24drm/exynos: use DRM_DEV_ERROR to print out error messageInki Dae1-5/+9
This patch just cleans up the use of error log macro, which changes the log macro to DRM_DEV_ERROR. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2019-04-24drm/exynos: remove unnecessary messagesInki Dae1-2/+0
This patch removes unnecessary messages from fimd_clear_channels and decon_clear_channels functions which print out just function name. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-12-04drm/exynos/iommu: integrate IOMMU/DMA internal APIAndrzej Hajda1-2/+1
Exynos DRM drivers should work with and without IOMMU. Providing common API generic to both scenarios should make code cleaner and allow further code improvements. The patch removes including of exynos_drm_iommu.h as the file contains mostly IOMMU specific stuff, instead it exposes exynos_drm_*_dma functions and puts them into exynos_drm_dma.c. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-12-04drm/exynos: simplify DMA mappingAndrzej Hajda1-1/+1
Moving DMA mapping creation to drm_iommu_attach_device allows to avoid looping through all components and maintaining DMA device flags. v2: take care of configurations without IOMMU Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-07-24drm/exynos: Ensure suspended runtime PM state during system suspendMarek Szyprowski1-0/+2
Add calls to pm_runtime_force_{suspend,resume} as SYSTEM_SLEEP_PM_OPS for all drivers for the real Exynos DRM hardware modules. This ensures that the resources will be released for the system PM suspend/resume cycle. Exynos DRM core already takes care of suspending the whole display pipeline before PM callbacks of the real devices are called. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-01-02drm/exynos/decon: Move headers from global to local placeKrzysztof Kozlowski1-1/+1
The DECON headers contain only defines for registers. There are no other drivers using them so this should be put locally to the Exynos DRM driver. Keeping headers local helps managing the code. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos: simplify set_pixfmt() in DECON and FIMD driversTobias Jakobi1-6/+1
DRM core already checks the validity of the pixelformat. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos: consistent use of cppTobias Jakobi1-3/+3
A recent commit (272725c7db4da1fd3229d944fc76d2e98e3a144e) has removed the use of 'bits_per_pixel' in DRM. However the corresponding Exynos driver code still uses the ambiguous 'bpp', even though it is now initialized from fb->cpp[0]. Consistenly use 'cpp' in FIMD, DECON7 and DECON5433 drivers. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
2017-06-01drm/exynos: kill mode_set_nofb callbackAndrzej Hajda1-1/+0
All Exynos CRTCs are fully configured by .enable callback. The only users of mode_set_nofb actually did nothing in their callbacks - they immediately returned because devices were in suspend state - mode_set_nofb is always called on disabled device. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos: kill pipe field from drivers contextsAndrzej Hajda1-3/+1
Since possible_crtcs are set by Exynos core helper pipe fields have no raison d'etre. The only place it was used, as a hack, is fimd_clear_channels, to avoid calling drm_crtc_handle_vblank, but DRM core has already other protection mechanism (vblank->enabled), so it could be safely removed. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos: set plane possible_crtcs in exynos_plane_initAndrzej Hajda1-1/+1
All Exynos planes are assigned to exactly one CRTC, it allows to simplify initialization by moving setting of possible_crtcs to exynos_plane_init. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos: kill exynos_drm_private::pipeAndrzej Hajda1-9/+2
The field duplicates drm_dev->mode_config.num_crtc. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-06-01drm/exynos: kill exynos_drm_crtc::pipeAndrzej Hajda1-2/+1
Since crtc index is stored in drm_crtc pipe field became redundant. The patch beside removing the field simplifies also exynos_drm_crtc_get_pipe_from_type. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-03-21drm/exynos: move crtc event handling to drivers callbacksAndrzej Hajda1-0/+1
CRTC event is currently send with next vblank, or instantly in case crtc is being disabled. This approach usually works, but in corner cases it can result in premature event generation. Only device driver is able to verify if the event can be sent. This patch is a first step in that direction - it moves event handling to the drivers. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-12-15drm: Nuke fb->pixel_formatVille Syrjälä1-1/+1
Replace uses of fb->pixel_format with fb->format->format. Less duplicated information is a good thing. Note that coccinelle failed to eliminate the "/* fourcc format */" comment from drm_framebuffer.h, so I had to do that part manually. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - a->pixel_format + a->format->format | - b.pixel_format + b.format->format ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - a->fb->pixel_format + a->fb->format->format | - b.fb->pixel_format + b.fb->format->format ) @@ struct drm_crtc *CRTC; @@ ( - CRTC->primary->fb->pixel_format + CRTC->primary->fb->format->format | - CRTC->primary->state->fb->pixel_format + CRTC->primary->state->fb->format->format ) @@ struct drm_mode_set *set; @@ ( - set->fb->pixel_format + set->fb->format->format | - set->crtc->primary->fb->pixel_format + set->crtc->primary->fb->format->format ) @@ @@ struct drm_framebuffer { ... - uint32_t pixel_format; ... }; v2: Fix commit message (Laurent) Rebase due to earlier removal of many fb->pixel_format uses, including the 'fb->format = drm_format_info(fb->format->format);' snafu v3: Adjusted the semantic patch a bit and regenerated due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15drm: Nuke fb->bits_per_pixelVille Syrjälä1-3/+3
Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com
2016-10-01drm/exynos: use drm core to handle page-flip eventAndrzej Hajda1-9/+0
Exynos DRM framework handled page-flip event with custom code. The patch replaces it with drm-core vblank queue. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-06-19drm/exynos: remove superfluous inclusions of fbdev headerTobias Jakobi1-1/+0
Neither of these files issue any fbdev related calls. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: clean up wait_for_vblankInki Dae1-1/+0
This patch cleans up wait_for_vblank relevant codes. wait_for_vblank callback isn't used anymore in Exynos drm driver so it removes relevant codes. However, display controllers - FIMD and DECON - still use this function driver internally to ensure shadow registers to be updated, which resolves page fault issue so keep it. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: remove struct exynos_drm_panel_infoAndrzej Hajda1-1/+0
struct exynos_drm_panel_info is not used anymore, except exynos_dp, which can integrate useful fields directly into its context. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-01-13drm/exynos: crtc: rework atomic_{begin,flush}Marek Szyprowski1-6/+8
Some CRTC drivers (like Exynos DRM Mixer) can handle blocking register updates only on per-device level, not per-plane level. This patch changes exynos_crts atomic_begin/atomic_flush callbacks to handle the entire crtc, instead of given planes, so driver can handle both cases on their own. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-01-13drm/exynos: rename zpos to indexMarek Szyprowski1-5/+5
This patch renames zpos entry to index, because in most places it is used as index for selecting hardware layer/window instead of configurable layer position. This will later enable to make the zpos property configurable. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: introduce exynos_drm_plane_config structureMarek Szyprowski1-8/+15
This patch adds common structure for keeping plane configuration and capabilities data. This patch is inspired by similar code developed by Tobias Jakobi. Changelog v2: - fix vidi_win_types(i) call. vidi_win_types is not a function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: introduce exynos_drm_plane_state structureMarek Szyprowski1-10/+11
This patch introduces exynos_drm_plane_state structure, which subclasses drm_plane_state and holds precalculated data suitable for configuring Exynos hardware. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: move dma_addr attribute from exynos plane to exynos fbMarek Szyprowski1-7/+9
DMA address is a framebuffer attribute and the right place for it is exynos_drm_framebuffer not exynos_drm_plane. This patch also introduces helper function for getting dma address of the given framebuffer. Changelog v2: - use state->fb instead of plane->base.fb. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: exynos7-decon: remove excessive checkMarek Szyprowski1-10/+0
Display area is already checked by exynos plane core, so there is no need for such check in driver code. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: add pm_runtime to DECON 7Gustavo Padovan1-38/+55
Let pm_runtime handle the enabling/disabling of the device with proper refcnt instead of rely on specific flags to track the enabled state. Changelog v3: - revive suspended to keep current dpms mode Changelog v2: - Modify CONFIG_PM_SLEEP -> CONFIG_PM Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26drm/exynos: add cursor plane supportGustavo Padovan1-2/+2
Set one of the planes for each crtc driver as a cursor plane enabled window managers to fully work on exynos. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26drm/exynos: add global macro for the default primary planeGustavo Padovan1-3/+2
Define DEFAULT_WIN as zero to help set the primary plane on all CRTCs. Some CRTCs were defining a variable to store the default window, but that is not necessary as the default (primary) window is always the window zero. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: remove decon_mode_fixup()Gustavo Padovan1-12/+0
The only thing mode_fixup was doing was set the adjusted_mode->vrefresh to 60, but it already has the value of 60 when the decon_mode_fixup() is called. That means this call is actually pointless and can be removed. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-31drm/exynos: Properly report supported formats for each deviceMarek Szyprowski1-1/+14
Exynos DRM reported that all planes for all supported sub-devices supports only three pixel formats: XRGB24, ARGB24 and NV12. This patch lets each Exynos DRM sub-drivers to provide the list of supported pixel formats and registers this list to DRM core. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-31drm/exynos: implement atomic_{begin/flush} of DECONHyungwon Hwang1-6/+24
Each CRTC's atomic_{begin/flush} must stop/start the update of shadow registers to active register in the functions. This patch achieves these purpose by moving the setting of protection bits to those functions from decon_update_plane. v2: rebased to the branch exynos-drm-next Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-31drm/exynos: check for pending fb before finish updateGustavo Padovan1-1/+9
The current code was ignoring the end of update for all overlay planes, caring only for the primary plane update in case of pageflip. This change adds a change to start to check for pending updates for all planes through exynos_plane->pending_fb. At the start of plane update the pending_fb is set with the fb to be shown on the screen. Then only when to fb is already presented in the screen we set pending_fb to NULL to signal that the update was finished. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com> fixup! drm/exynos: check for pending fb before finish update
2015-08-16drm/exynos: remove struct exynos_drm_encoder layerGustavo Padovan1-1/+1
struct exynos_drm_encoder was justing wrapping struct drm_encoder, it had only a drm_encoder member and the internal exynos_drm_encoders ops that was directly mapped to the drm_encoder helper funcs. So now exynos DRM uses struct drm_encoder directly, this removes completely the struct exynos_drm_encoder. v2: add empty .mode_fixup() and .mode_set() to DSI and DPI to avoid null pointer. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16drm/exynos: remove exynos_drm_create_enc_conn()Gustavo Padovan1-2/+1
This functions was just hiding the encoder and connector creation in a way that was less clean than if we get rid of it. For example, exynos_encoder ops had .create_connector() defined only because we were handing off the encoder and connector creation to exynos_drm_create_enc_conn(). Without this function we can directly call the create_connector function internally in the code, without the need of any vtable access. It also does some refactoring in the code like creating a bind function for dpi devices. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16drm/exynos: remove struct exynos_drm_displayGustavo Padovan1-8/+9
This struct was just representing encoder information, it was a member of struct exynos_drm_encoder, so any code trying to access encoder data would have to go through the encoder struct, get the display struct and then get the data it want. During this patchset we also realized that the only data exynos_drm_encoder needs to store is the drm_encoder parent and the exynos_drm_encoder_ops. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16drm/exynos: unify exynos_drm_plane names with drm coreGustavo Padovan1-7/+7
Rename crtc_{widht,height} to crtc_{w,h} and src_{width,height} to src_{w,h} to make it similar to the atomic state names. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-13 05:24:44 +0000