summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dmub
AgeCommit message (Collapse)AuthorFilesLines
2022-11-23drm/amd/display: Add margin on DRR vblank start for subvpAlvin Lee1-1/+2
[Description] - Add margin for HUBP "jitter" for SubVp + DRR case - Also do a min transition even if MPO is added on a non SubVP pipe (i.e. added on DRR pipe for SubVP + DRR) Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: [FW Promotion] Release 0.0.143.0Anthony Koo1-1/+2
- New boot options to enable USB4 DP BW Allocation mode in DPIA Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amd/display: Waiting for 1 frame to fix the flash issue on PSR1Ryan Lin1-1/+5
[Why] Needs more frames waiting before the PSR_Exit sending for the specific TCON. [How] Add relock_delay_frame_cnt to control how many frames waiting are needed before the PSR_Exit sending. The default value is 0. The Driver side can set this variable for specific TCONs. Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: [FW Promotion] Release 0.0.141.0Anthony Koo1-0/+6
- Add flag as a status read back that indicates back to back flips detected during psr. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: Document part of the DMUB cmdAnthony Koo1-1/+12
Add a simple documentation in the dmub_cmd. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: Implement secure display on DCN21Alan Liu1-0/+26
[Why] Porting secure display feature from DCN10 to DCN21. Support single display for now and will extend to multiple displays. [How] - use workqueue to offload works for dmub or dmcu firmware - after receiving ROI update from userspace, set skip_frame_cnt to 1 - refactor amdgpu_dm_crtc_handle_crc_window_irq() - disable PSR before activating secure_display on a crtc - check if secure_display is activated before enabling psr - only work for single display for now. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-10drm/amd/display: Use set_vtotal_min_max to configure OTG VTOTALRodrigo Siqueira1-4/+0
In multiple parts of the DCN code, we write directly to the OTG_V_TOTAL_* registers in some OPTC functions. Let's avoid it by using the set_vtotal_min_max. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-10drm/amd/display: Display does not light up after S4 resumeMeenakshikumar Somasundaram3-1/+22
[Why] Dpia hpd interrupt processing is disabled when entering S4/S0i3 and would be reenabled after detection completes during resuming. Because, keeping hpd interrupts enabled during detection leads to multiple detections for the same hpd transition. There is a S4 case where dpia hpd interrupt is missed when driver is in transitioning from hpd interrupt processing disable to enable and the display does not light up. [How] - Added dmub inbox command DMUB_CMD__DPIA_HPD_INT_ENABLE to explicitly control dmub to issue dpia hpd interrupt or not. If dpia hpd interrupt is disabled, dmub will keep the hpd pending and post it once driver reenables dpia hpd interrupt or when querying with DMUB_CMD__QUERY_HPD_STATE. - Added dmub boot option dpia_hpd_int_enable_supported to notify dmub about whether DMUB_CMD__DPIA_HPD_INT_ENABLE command would be used. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-10drm/amd/display: Use the same cursor info across featuresMax Tseng1-7/+108
Since different features would need to update cursor registers, However, they would use different approaches. To unify varied methods, this refactor is implemented the same update cursor info method for current varied features. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Max Tseng <Max.Tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Cursor Info Update refactorMax Tseng1-0/+5
Dc: cursor info update: phase 1: [Why] Different feature might need to update cursor info, but With different approaches. To unify this diversity problem, all features should use The same interface to update cursor. Reviewed-by: Reza Amini <reza.amini@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Max Tseng <max.tseng@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: [FW Promotion] Release 0.0.134.0Anthony Koo1-1/+2
- Handle pipe split case for SubVP: Pass in pipe split index for main and phantom pipes Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amd/display: [FW Promotion] Release 0.0.132.0Anthony Koo1-2/+1
- Fix comment to indicate correct visual confirm option Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amd/display: Add support for visual confirm colorLeo (Hanghong) Ma2-0/+45
[Why] We want to get the visual confirm color of the bottom-most pipe for test automation. [How] Save the visual confirm color to plane_state before program to MPC; Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd/display: [FW Promotion] Release 0.0.130.0Anthony Koo1-2/+14
- For SubVP add scaling factor to allow firmware to calculate accurate line to start programming Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add support for manual DMUB FAMS triggerAnthony Koo1-1/+8
- Add is_drr parameter to indicate DRR is enabled on the panel to determine whether SubVP MCLK switch logic should be enabled - Add DRR manual trigger in FW (instead of driver) because manual trigger programming triggers DRR update pending and can block SubVP MCLK switches from taking place Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-13drm/amd/display: Add DMUB support for DCN314Roman Li1-0/+1
Initialize DMUB for DCN 3.1.4. Use same funcs as DCN31. Signed-off-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-13drm/amd/display: Add DCN314 version identifiersRoman Li1-0/+1
DCN 3.1.4 version and family ids Signed-off-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Add basic infrastructure for enabling FAMSRodrigo Siqueira1-1/+24
We want to enable Firmware Assisted Memory (FAMS) Switching, but first, we need to add the required code infrastructure in DC before allowing it in amdgpu_dm. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Add SubVP required codeAlvin Lee2-0/+272
This commit enables the SubVP feature. To achieve that, we need to: - Don't force p-state disallow on SubVP (can't block dummy p-state) - Send calculated watermark to DMCUB for SubVP - Adjust CAB mode message to PMFW - Add a proper locking sequence for SubVP - Various fixes to SubVP static analysis and determining SubVP config - Currently SubVP not supported with pipe split so merge all pipes before setting up SubVp Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-07drm/amd/display: [FW Promotion] Release 0.0.119.0Anthony Koo1-0/+1
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: align dmub cmd header to latest dmub FW to support PSR-SUDavid Zhang1-5/+245
[why] PSR-SU is implemented in upstreamed dmub FW but not enabled on DM and DC. We'd add necessary and missing definitions in dmub cmd header to align w/ the up-to-date DMUB FW for PSR-SU support. [how] Add definitions and items below into dmub cmd header: - DMUB psr version enumeration for PSR-SU - dirty rectangle structure - psr debug flag of forcing full frame update - dmub command of updating dirty rectangle and cursor infor - dmub psr command type of setting sink vtotal in PSR active - dmub psr su debug flags structure - dmub cmd structure for - updating dirty rectangle - cursor infor - setting sink vtotal - dmub ringbuffer command items Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: cleaning up smu_if to add future flexibilityMartin Leung1-1/+4
This commit cleans up code that uses old variables and adds some SMU interfaces for future flexibility. Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Ensure that DMCUB fw in use is loaded by DC and not VBIOSDillon Varone1-1/+3
[Why?] On wake from S3/S4, driver checks if DMUB is initialized. On S4 VBIOS loads DMUB, and driver does not reload as it appears to be initialized already. [How?] Add a check for the DAL_FW bit to ensure that loaded FW is from driver and not VBIOS. Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Add DMCUB source files and changes for DCN32/321Aurabindo Pillai6-2/+826
DMCUB is the display engine microcontroller which aids in modesetting and other display related features. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Add DCN32/321 version identifiersAurabindo Pillai1-0/+2
Add DCN3.2 asic identifiers. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-01drm/amd/display: Fix DMUB outbox trace in S4 (#4465)Hung, Cruise1-0/+2
[Why] DMUB Outbox0 read/write pointer not sync after resumed from S4. And that caused old traces were sent to outbox. [How] Disable DMUB Outbox0 interrupt and clear DMUB Outbox0 read/write pointer when resumes from S4. And then enable Outbox0 interrupt before starts DMCUB. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-01drm/amd/display: Wait DMCUB to idle state before reset.hengzhou2-2/+10
[WHY] Very low rate to cause memory access issue while resetting DMCUB after the halt command was sent to it. The process of stopping fw of DMCUB may be timeout, that means it is not in idle state, such as the window frames may still be kept in cache, so reset by force will cause MMHUB hang. [HOW] After the halt command was sent, keep checking the DMCUB state until it is idle. Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: hengzhou <Hengyong.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amd/display: [FW Promotion] Release 0.0.115.0Anthony Koo1-1/+34
- Add new cmd for querying HPD state Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amd/display: Add Connection Manager boot option.Jimmy Kizito3-1/+4
[Why] Boot up behaviour may differ depending on the Connection Manager handling USB4 tunneling. [How] Send boot option to firmware to indicate Connection Manager. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-05drm/amd/display: [FW Promotion] Release 0.0.111.0Anthony Koo1-20/+82
- Add options to allow for configurable PHY options during PSR active state - Remove unused versioning and git hash Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-05drm/amd/display: Fix unused-but-set-variable warningAashish Sharma1-4/+2
Fix the kernel test robot warning below: drivers/gpu/drm/amd/amdgpu/../display/dmub/inc/dmub_cmd.h:2893:12: warning: variable 'temp' set but not used [-Wunused-but-set-variable] Replaced the assignment to the unused temp variable with READ_ONCE() macro to flush the writes. READ_ONCE() helps avoid the use of volatile and makes it obvious from the code that the read here is intentional. Also verified on x86 that the generated code is exactly the same as before. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Aashish Sharma <shraash@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: [FW Promotion] Release 0.0.110.0Anthony Koo1-86/+4
- Revert save/restore PANEL_PWRSEQ_REF_DIV2 and other psr phy optimizations Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: [FW Promotion] Release 0.0.109.0Anthony Koo1-2/+2
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: [FW Promotion] Release 0.0.108.0Anthony Koo1-2/+2
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2Charlene Liu1-2/+86
[why] DCN31 has this in zstate save/restore sequence. need for non_zstate supported ASIC [how] add this PANEL_PWRSEQ_REF_DIV2 to existing panel_cntl_hw_init structure. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: [FW Promotion] Release 0.0.107.0Anthony Koo1-2/+2
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-04drm/amd/display: [FW Promotion] Release 0.0.106.0Anthony Koo1-2/+2
Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-02drm/amd/display: Adding a dc_debug option and dmub setting to use PHY FSM ↵Shah Dharati1-2/+6
for PSR [Why] PSR Power on/off is done in PSR. Add a dc_debug option and dmub setting to use PHY implementation of this instead. [How] Add a dc_debug option and dmub setting to use PHY FSM Power up/down for PSR. Co-authored-by: Shah Dharati <dharati.shah@amd.com> Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Shah Dharati <dharati.shah@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: add cable ID support for usb c connectorWenjing Liu1-0/+40
[how] Call to DMUB to retrieve usb c cable ID data from PD firmware. If cable id is retrieved from DMUB, skip reading cable ID from RX. Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: Remove unused temp variableMaíra Canal1-0/+4
Remove unused temp variable from the dmub_rb_flush_pending function by using arithmetic to remove the loop. The -Wunused-but-set-variable warning was pointed out by Clang with the following warning: drivers/gpu/drm/amd/amdgpu/../display/dmub/inc/dmub_cmd.h:2921:12: warning: variable 'temp' set but not used [-Wunused-but-set-variable] uint64_t temp; ^ v2: squash in revert and comment update (Alex) Signed-off-by: Maíra Canal <maira.canal@usp.br> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-18drm/amd/display: Add DCN315 DMUBQingqing Zhuo5-5/+139
Add support for the DMUB firmware for DCN 3.1.5. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-17drm/amd/display: Add DMUB support for DCN316Leo Li5-0/+102
Initialize DMUB for DCN316. Use same funcs as DCN31 for DCN316. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-16drm/amd/display: [FW Promotion] Release 0.0.104.0Anthony Koo1-2/+2
Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-07drm/amd/display: [FW Promotion] Release 0.0.103.0Anthony Koo1-2/+2
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: [FW Promotion] Release 0.0.102.0Anthony Koo1-4/+4
- Correct number of reserved bits in cmd_lock_hw - Extend bits of hw_lock_client to allow for more clients Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: [FW Promotion] Release 0.0.101.0Anthony Koo1-3/+6
- Add Scr8 for GPINT messaging between driver and fw Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-18drm/amd/display: [FW Promotion] Release 0.0.100.0Anthony Koo1-2/+2
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-18drm/amd/display: adjust bit comparison to be more type safeEric Yang1-1/+1
Might potentially have truncation problem with the implicit casting Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: [FW Promotion] Release 0.0.98Anthony Koo1-2/+2
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: Fix check for null function ptrAlvin Lee1-2/+2
[Why] Bug fix for null function ptr (should check for NULL instead of not NULL) [How] Fix if condition Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-06-28 12:04:34 +0000