Age | Commit message (Collapse) | Author | Files | Lines |
|
There is a spelling mistake in the struct field dram_clk_chanage. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
- When entering into a SubVP config that requires a minimal
transition we need to retain phantom pipes and also restore
the mall config
- This is because the min transition will remove phantom pipes
from the context (shallow copy) and not restore it's original
state
- This is just a workaround, and needs a proper fix
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
- This is a workaround to avoid concurrency issues -- a fast update
creates a shallow copy of the dc current_state, and removes all
subvp/phantom related flags.
- We want to prevent the fast update thread from removing those
flags in case there's another thread running that requires
the info for proper programming
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
- If we fail validation, we should retain the phantom
stream/planes
- Full updates assume that phantom pipes will be fully
removed, but if validation fails we keep the phantom
pipes
- Therefore we have to retain the plane/stream if validation
fails (since the refcount is decremented before validation,
and the expectation is that it's fully freed when the old
dc_state is released)
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When some of the IGT tests are executed in DCN31, it is possible to see
multiple occurrences of this warning:
WARNING: CPU: 9 PID: 3482 at
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dcn30/dcn30_dpp.c:154
dpp3_program_post_csc+0x196/0x220 [amdgpu]
[..]
PU: 9 PID: 3482 Comm: amd_hdr Tainted: G W 5.18.0+ #3
IP: 0010:dpp3_program_post_csc+0x196/0x220 [amdgpu]
[..]
all Trace:
<TASK>
dpp3_cnv_setup+0x5d9/0x5f0 [amdgpu]
? dcn20_blank_pixel_data+0x30a/0x330 [amdgpu]
dcn20_program_pipe+0x259/0xb40 [amdgpu]
? offset_to_id+0x1b0/0x1c0 [amdgpu]
dcn20_program_front_end_for_ctx+0x36a/0x450 [amdgpu]
commit_planes_for_stream+0x8eb/0x13e0 [amdgpu]
This commit fix the above issue by adding YCBCR2020 coefficients to the
DPP Color Space Converter (CSC) matrix.
Reviewed-by: Nawwar Ali <nawwar.ali@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move the new callback outside of the guard.
Fixes: dc55b106ad47 ("drm/amd/display: Disable phantom OTG after enable for plane disable")
CC: Alvin Lee <Alvin.Lee2@amd.com>
CC: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
- When transitioning a pipe in use (non-phantom) to become
a phantom pipe, we must fully disable the pipe first before
doing any phantom pipe programming
- Move phantom OTG enablement to after "regular" front-end
programming sequence (including wait for vupdate)
- If a pipe is being transitioned into a phantom pipe,
fully disable it first
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
HW recommend we enable this for better DF QoS for DCN 3.2.x
[how]
Add interfaces to hubbub to program register
Add initialization as part of init_hw
Add default settings for DCN 3.2.x
Add registry override for debug/tuning
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
- Need to disable phantom OTG after it's enabled
in order to restore it to it's original state.
- If it's enabled and then an MCLK switch comes in
we may not prefetch the correct data since the phantom
OTG could already be in the middle of the frame.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add basic kernel-doc that describes some of the struct and functions
that are part of the DC commit sequence..
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add kernel-doc to some important elements from DC struct that might help
to understand DC sequence.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add kernel-doc to some of the ODM-related functions.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a kernel-doc to the DE-Tile function hook.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit adds extra documentation for elements related to FAMs.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
reuse struct rect rather than adding a new struct.
[How]
- Userspace keeps inputting x_start, y_start, x_end, y_end
- We translate data to x, y, width, height in code flow to store
- translate back to x_start, y_start, x_end, y_end before programming HW
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Porting secure display feature from DCN10 to DCN21. Support single
display for now and will extend to multiple displays.
[How]
- use workqueue to offload works for dmub or dmcu firmware
- after receiving ROI update from userspace, set skip_frame_cnt to 1
- refactor amdgpu_dm_crtc_handle_crc_window_irq()
- disable PSR before activating secure_display on a crtc
- check if secure_display is activated before enabling psr
- only work for single display for now.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Read set_power_state dpcd after HPD cause USB4 CTS 4.2.1.1
[How]
Read LTTPR caps first. If aux channel not ready, wake up aux channel.
If wake up aux channel return pass, retrieve lttpr caps again. If wake
up aux channel return false, register a detection retry timer.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
VPG doesn't have the ability to mute audio output by sending all 0s in
audio SDP. The existing implemention is disabling audio SDP instead.
This is same as what dp_audio_enable does. Since it is no longer
referenced by any callers, we decided to remove this interface for
simplicity.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Unify stream encoder audio setup interface.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
1. As recommended by hardware team, don't enable APG when stream is not
enabled.
2. Move audio stream encoder programming into link_hwss.
[how]
1. Merge dp_audio_enable into enable audio stream hw sequence.
2. Move stream encoder programming into link hwss level to unify stream
encoder programming interface.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It's MIT.
Fixes: b73353f7f3d434 ("drm/amd/display: Use the same cursor info across features")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since different features would need to update cursor registers, However,
they would use different approaches.
To unify varied methods, this refactor is implemented the same update
cursor info method for current varied features.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Max Tseng <Max.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Acquire FCLK DPM levels to properly construct DML clock limits. Further
add new logic to keep number of indices for each clock in clk_mgr.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Add a helper to map ODM/MPC/Multi-Plane resources from DC
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
At some point, we decided to blank HUBP during pixel data blank, and to
handle that, we added some OPTC lock checks. Later, we realized that
this change caused multiple regression, and we removed it. Nevertheless,
we still have some leftovers that might affect some ASIC behavior, and
this commit drops those changes to keep the code consistent.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We split out ILR config from "global" to "per-panel" config settings.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Removal of DC_FP_* wrappers from dml (9696679bf7ac) provokes a mutex
lock [2] on the amdgpu driver. Re-arrange the dcn10 code to avoid
locking the mutex by placing the DC_FP_* wrappers around the proper
functions.
This fixes the following WARN/stacktrace:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 227, name: systemd-udevd
preempt_count: 1, expected: 0
CPU: 4 PID: 227 Comm: systemd-udevd Not tainted 6.0.0-rc6-qtec-standard #2
Hardware name: Qtechnology A/S QT5222/QT5221, BIOS v1.0.1 06/07/2021
Call Trace:
<TASK>
dump_stack_lvl+0x33/0x42
__might_resched.cold.172+0xa5/0xb3
mutex_lock+0x1a/0x40
amdgpu_dpm_get_clock_by_type_with_voltage+0x38/0x70 [amdgpu]
dm_pp_get_clock_levels_by_type_with_voltage+0x64/0xa0 [amdgpu]
dcn_bw_update_from_pplib+0x70/0x340 [amdgpu]
dcn10_create_resource_pool+0x8c8/0xd20 [amdgpu]
? __kmalloc+0x1c7/0x4a0
dc_create_resource_pool+0xe7/0x190 [amdgpu]
dc_create+0x212/0x5d0 [amdgpu]
amdgpu_dm_init+0x246/0x370 [amdgpu]
? schedule_hrtimeout_range_clock+0x93/0x120
? phm_wait_for_register_unequal.part.1+0x4a/0x80 [amdgpu]
dm_hw_init+0xe/0x20 [amdgpu]
amdgpu_device_init.cold.56+0x1324/0x1653 [amdgpu]
? pci_bus_read_config_word+0x43/0x80
amdgpu_driver_load_kms+0x15/0x120 [amdgpu]
amdgpu_pci_probe+0x116/0x320 [amdgpu]
pci_device_probe+0x97/0x110
really_probe+0xdd/0x340
__driver_probe_device+0x80/0x170
driver_probe_device+0x1f/0x90
__driver_attach+0xdc/0x180
? __device_attach_driver+0x100/0x100
? __device_attach_driver+0x100/0x100
bus_for_each_dev+0x74/0xc0
bus_add_driver+0x19e/0x210
? kset_find_obj+0x30/0xa0
? 0xffffffffa0a5b000
driver_register+0x6b/0xc0
? 0xffffffffa0a5b000
do_one_initcall+0x4a/0x1f0
? __vunmap+0x28e/0x2f0
? __cond_resched+0x15/0x30
? kmem_cache_alloc_trace+0x3d/0x440
do_init_module+0x4a/0x1e0
load_module+0x1cba/0x1e10
? __do_sys_finit_module+0xb7/0x120
__do_sys_finit_module+0xb7/0x120
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff2b5f5422d
Code: 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48>
3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 ab 0e 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc44ab28e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000555c566a9240 RCX: 00007ff2b5f5422d
RDX: 0000000000000000 RSI: 00007ff2b60bb353 RDI: 0000000000000019
RBP: 00007ff2b60bb353 R08: 0000000000000000 R09: 0000555c566a9240
R10: 0000000000000019 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000020000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Fixes: 9696679bf7ac ("drm/amd/display: remove DC_FP_* wrapper from dml folder")
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Daniel Gomez <daniel@qtec.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Previously, LTTPR mode was decided during detection which makes
link training inflexible as mode can't be dynamically changed.
[HOW]
-Remove lttpr_mode from link struct, and move to link training settings
-Defer choosing LTTPR mode until link training
Other DP changes included:
-Only use fixed vs/pe link training sequence for 8b/10b encoding
-Restrict fixed vs aux timeout workaround to Yellow Carp family
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
Several transitions were fixed that will allow Dynamic ODM and MPO
transitions to be supported on DCN32.
1) Due to resource limitations, in certain scenarios that require an MPO
plane to be split, the features cannot be combined with the current
policy. This is due to unsafe transitions being required (OPP instance
per MPCC being switched on active pipe is not supported by DCN), to
support the split plane with ODM active as it moves across the viewport.
Dynamic ODM will now be disabled when MPO is required.
2) When exiting MPO and re-entering ODM, DC assigns an inactive pipe for
the next ODM pipe, which under previous power gating policy would result
in programming a gated DSC HW block. New policy dynamically
gates/un-gates DSC blocks when Dynamic ODM is active to support
transitions on DCN32 only.
3) Entry and exit from 3 plane MPO and Dynamic ODM requires a minimal
transition so that all pipes which require their MPCC OPP instance to
be changed have a full frame to be disabled before reprogramming. To
solve this, the Dynamic ODM policy now utilizes minimal state
transitions when entering or exiting 3 plane scenarios.
4) Various fixes to DCN32 pipe merge/split algorithm to support Dynamic
ODM and MPO transitions.
In summary, this commit fixes various transitions to support ODM->MPO
and MPO->ODM.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
For individual feature testing, PMFW may not report all clock
values back. Driver will default them to 0 but this will
cause the BB table to be skipped and default to one state
with max clocks.
[How]
Add helper function to scan through initial clock values and
populate them with default clock limits so that BB table
can be built.
Add dpm_enabled flag to check when DPM is not enabled and
to trigger helper function.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Only a single VLINE interrupt is available so interface should not
expose the second one which is used by DMU firmware.
[how]
Remove references to periodic_interrupt1 and VLINE1 from DC interfaces.
Reviewed-by: Jaehyun Chung <jaehyun.chung@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
During hot plug of specific 5K tiled display, sometimes both the tiles
are not synchronized resulting in distortion. The reason is that otgs of
both the tiles goes out of sync when otg workaround (dcnxxx_disable_otg_wa)
is applied for bandwidth optimization. The otg workaround reenables otg
but otg synchronization context is not reset and hence dc_trigger_sync()
does not resynchronize otg again.
[How]
Implement reset_sync_context_for_pipe() to reset the otg synchronization
context for the disabled pipe and its slave pipes when otg workaround is
applied.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
ODM seamless transitions require DIV_MODE_AUTO. However,
DIV_MODE_AUTO only works when all the horizontal timing params
are divisible by the ODM combine factor. Therefore, disable the
ODM 2:1 policy when the horizontal timing params are not divisible
by 2.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Original change 594b237b9a07 ("drm/amd/display: Add
interface to track PHY state") was implemented by assuming stream's
dpms off is equivalent to PHY power off.
This assumption doesn't hold in following situations:
1. MST multiple stream scenario, where multiple streams are sharing the
same PHY output. Toggle dpms off for one of the stream doesn't power
off the PHY due to the presence of other streams.
2. enable stream failure scenario, where enable stream fails due to
failure of link training. This will cause DPMS off is set to false, while
the actual PHY power state is off in certain cases.
Due to the problematic assumption, the logic will skip disabling
other streams for MST multiple stream scenario, therefore PHY is
not actually powered off.
[how]
1. Rework this refactor by moving PHY state update down to hardware
level, where we update PHY state in place when hardware sequencer
is actually changing the power state of the PHY hardware.
2. Reimplement symclk on TX off workaround in place when we are actually
calling transmitter control to power off PHY in dcn32. Note the workaround is
added due to the lack of proper software interface to set TX while keeping
symclk on. We plan to address this interface problem so we can set TX off
only without affecting symclk in future dcn versions.
Fixes: 594b237b9a07 ("drm/amd/display: Add interface to track PHY state")
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
In some cases the viewport position of the main pipes can change without
triggering a full update. In this case the subvp phantom viewports must
be updated accordingly.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The interpretation of the number of memory channels
differ by memory type, and this affects channel width
for the DML input.
[How]
Set dram channel width according to memory type for
dcn314.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why && How]
We would like to have visual confirm color support for SubVP.
1. Set visual confirm color to red: SubVP is enable on this
display;
2. Set visual confirm color to green: SubVP is enable on
other display and DRR is on this display;
3. Set visual confirm color to blue: SubVP is enable on
other display and DRR is off on this display;
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Sometimes pixel clock needs to remain active after transmitter disable.
[How]
Use update_phy_state to track PHY state after stream
enable/disable and program pixel clock as needed.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dml_wrapper* files were removed in commit 01b537eeb049
("drm/amd/display: Remove unused code"), as they are not used anywhere.
However, the header file wasn't removed, so remove the header as well.
Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Describe structs and enums used to set blend mode properties to MPC
blocks. Some pieces of information are already available as code
comments, and were just formatted. Others were collected and summarised
from discussions on AMD issue tracker[1][2].
[1] https://gitlab.freedesktop.org/drm/amd/-/issues/1734
[2] https://gitlab.freedesktop.org/drm/amd/-/issues/1769
v2:
- fix typos (Tales)
- add MPCC to MPC entry in the glossary
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Tales Aparecida <tales.aparecida@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We got a report from Stephen/Michael that the PowerPC build was failing
with the following error:
ld: drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o uses soft float
ld: failed to merge target specific data of file drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o
This error happened because of the function optc3_set_vrr_m_const. This
function expects a double as a parameter in a code that is not allowed
to have FPU operations. After further investigation, it became clear
that optc3_set_vrr_m_const was never invoked, so we can safely drop this
function and fix the ld issue.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Melissa Wen <mwen@igalia.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
Preparation to enable run time initialization of register offsets to add
dc_context to the link_enc_create callback. This is needed to get the
dc_ctx handle where register offset initialization routine is called.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When Static screen from MALL, the cursor needs to be
cached if cursor exceeds 64x64 size.
[How]
Program the bit that cache cursor in MALL when size
of the cursor exceeds 64x64.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Currently programming incorrect hpo inst as well as selecting incorrect source
[HOW]
Use hpo inst instead of otg inst to select dpstreamclk inst
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
DP DTO isn't used for 128b/132b encoding
[HOW]
Check current link rate to determine whether using 8b/10b or 128/132b encoding
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We don't write out attributes after disabling and re-enabling the link
on some monitors, causing some, but not all, HDMI displays to fail to
lightup on DCN314.
[How]
Firmware used to do this after DIG link setup.
Since firmware is no longer doing this to support USB4 and dynamic link
remapping we'll need to add this to driver in the equivalent paths.
New optional callbacks were created in the stream encoder interface and
implementations were added for DCN314.
Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.20-2022-07-14:
amdgpu:
- DCN3.2 updates
- DC SubVP support
- DP MST fixes
- Audio fixes
- DC code cleanup
- SMU13 updates
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11
- Soft reset for SDMA 6
- Add gfxoff status query for vangogh
- Improve BO domain pinning
- Fix timestamps for cursor only commits
- MES fixes
- DCN 3.1.4 support
- Misc fixes
- Misc code cleanup
amdkfd:
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
- fix possible list corruption on queue failure
radeon:
- Fix bogus power of two warning
UAPI:
- Unified memory for CWSR save/restore area for KFD
Proposed userspace: https://lists.freedesktop.org/archives/amd-gfx/2022-June/080952.html
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220714214716.8203-1-alexander.deucher@amd.com
|
|
2:1 combine
[Why]
With single display odm 2:1 policy, when moving windowed MPO across
the display, we experience a momentary lag when we move between the
centre of the display and the right half of the display. This is
caused by the MPO pipe being reallocated when it crosses this
boundary
[How]
Handle two cases:
1. if the head pipe has a MPO pipe already allocated in the old
context, then use that pipe if it is available in the current
context
2. if the head pipe is on the left side, check the right side to
see if it has a MPO pipe already allocated. If so, don't use
that pipe if it is selected as the idle pipe in the current
context
Add new function pointer called .acquire_idle_pipe_for_head_pipe
that will pass in the head pipe and handle case 1
Add find_idle_secondary_pipe_check_mpo() to handle case 2
if we don't hit case 1.
In dc_add_plane_to_context(), start with head pipe and check
case 1 and 2 in call acquire_free_pipe_for_head().
If we are on the right side of the display, check case 1
again by passing in right side pipe as the new head in
call acquire_free_pipe_for_head().
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Ideally link capability should be independent from the link
configuration that we decide to use in enable link. Otherwise if link
capability is changed after validation has completed, we could end up
enabling a link configuration with invalid configuration. This would
lead to over link bandwidth subscription or in the extreme case
causes us to enable HPO link to a DIO stream.
[how]
Add a new struct in pipe ctx called link config. This structure will
contain link configuration to enable a link. It will be populated
during map pool resources after we validate link bandwidth. Remove
the reference of verified link cap during enable link process and
use link config in pipe ctx instead.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|