summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dc/inc
AgeCommit message (Collapse)AuthorFilesLines
2022-03-15drm/amd/display: Add pstate verification and recovery for DCN31Nicholas Kazlauskas1-0/+2
[Why] To debug when p-state is being blocked and avoid PMFW hangs when it does occur. [How] Re-use the DCN10 hardware sequencer by adding a new interface for verifying p-state high on the hubbub. The interface is mostly the same as the DCN10 interface, but the bit definitions have changed for the debug bus. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Fix double free during GPU reset on DC streamsNicholas Kazlauskas1-0/+5
[Why] The issue only occurs during the GPU reset code path. We first backup the current state prior to commiting 0 streams internally from DM to DC. This state backup contains valid link encoder assignments. DC will clear the link encoder assignments as part of current state (but not the backup, since it was a copied before the commit) and free the extra stream reference it held. DC requires that the link encoder assignments remain cleared/invalid prior to commiting. Since the backup still has valid assignments we call the interface post reset to clear them. This routine also releases the extra reference that the link encoder interface held - resulting in a double free (and eventually a NULL pointer dereference). [How] We'll have to do a full DC commit anyway after GPU reset because the stream count previously went to 0. We don't need to retain the assignment that we had backed up, so just copy off of the now clean current state assignment after the reset has occcurred with the new link_enc_cfg_copy() interface. Fixes: 6d63fcc2a334 ("drm/amd/display: Reset link encoder assignments for GPU reset") Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: add cable ID support for usb c connectorWenjing Liu1-1/+1
[how] Call to DMUB to retrieve usb c cable ID data from PD firmware. If cable id is retrieved from DMUB, skip reading cable ID from RX. Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-14Merge tag 'amd-drm-next-5.18-2022-02-11-1' of ↵Dave Airlie13-94/+141
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.18-2022-02-11-1: amdgpu: - Clean up of power management code - Enable freesync video mode by default - Clean up of RAS code - Improve VRAM access for debug using SDMA - Coding style cleanups - SR-IOV fixes - More display FP reorg - TLB flush fixes for Arcuturus, Vega20 - Misc display fixes - Rework special register access methods for SR-IOV - DP2 fixes - DP tunneling fixes - DSC fixes - More IP discovery cleanups - Misc RAS fixes - Enable both SMU i2c buses where applicable - s2idle improvements - DPCS header cleanup - Add new CAP firmware support for SR-IOV amdkfd: - Misc cleanups - SVM fixes - CRIU support - Clean up MQD manager UAPI: - Add interface to amdgpu CTX ioctl to request a stable power state for profiling https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/207 - Add amdkfd support for CRIU https://github.com/checkpoint-restore/criu/pull/1709 - Remove old unused amdkfd debugger interface Was only implemented for Kaveri and was only ever used by an old HSA tool that was never open sourced radeon: - Fix error handling in radeon_driver_open_kms - UVD suspend fix - Misc fixes From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220211220706.5803-1-alexander.deucher@amd.com
2022-02-02drm/amd/display: move link_hwss to link folder and break down to filesWenjing Liu2-18/+1
[why] Move link_hwss to its own folder as part of DC LIB and break it down to separate file one for each type of backend for code isolation. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: move get_link_hwss to dc_resourceWenjing Liu2-1/+19
[why] Isolate the way to obtain link_hwss from the actual implemenation of link_hwss. So the caller can call link_hwss without knowing the implementation detail of link_hwss. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: temporarly move non link_hwss code to dc_link_dpWenjing Liu3-48/+50
[why] Clean up dc_link_hwss file in the preparation of breaking it down to file for each encoder type. We temporarly move the original dp link functions in link_hwss back to dc_link_dp. We will break dc_link_dp down after link_hwss is in good shape. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: add set dp lane settings to link_hwssWenjing Liu2-1/+6
[why] Factor set dp lane settings to link_hwss. v2: fix statement with no effect warning (Alex) Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: add set dp link test pattern to link_hwssWenjing Liu1-0/+3
[why] Factor set dp link test pattern to link_hwss. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: add enable/disable dp link output to link_hwssWenjing Liu1-0/+8
[why] Factor enable/disable dp link output to link hwss. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: refactor destructive verify link cap sequenceWenjing Liu2-11/+3
[how] 1. move decide det link training link resource before each link training. 2. move disable link for handling vbios case into set all streams dpms off for link sequence. 3. extract usbc hotplug workaround into its own wa function. 4. Minor syntax changes to improve code readability. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: add setup/reset stream encoder to link_hwssWenjing Liu1-8/+14
[why] Factor setup/reset stream encoder to link hwss. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: revert "Reset fifo after enable otg"Zhan Liu1-4/+0
[Why] This change causes regression, that prevents some systems from lighting up internal displays. [How] Revert this patch until a new solution is ready. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Support synchronized indirect reg accessRoy Chan1-0/+34
[Why] indirect register index/data pair may be used by multi-threads. when it happens, it would cause register access issue that is hard to trace. [How] Using cgs service, which provide a sync indirect reg access api. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Roy Chan <roy.chan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Add Cable ID support for native DPShen, George1-0/+3
[Why/How] We need to handle cable capabilities for cables that support cable ID. The cable attributes are intersected with the verified link caps to determine appropriate max link rate. After determining cable attributes we update the DP receiver. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: George Shen <George.Shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: add protection in link encoder matching logicMartin Tsai2-1/+3
[Why] Link encoders are created based on its engine ID. The position of a link encoder in an array could be null since it didn't be allocated. Current matching logic didn't consider this situation and could get null encoder. [How] To add null encoder check to make the matching logic can go to next to get a valid one. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Martin Tsai <martin.tsai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: rename dc_link_hwss struct to link_hwssWenjing Liu1-2/+2
[why] This is internal to dc so we don't have to add a prefix to indicate it is dc link_hwss instead someone else link_hwss. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: add more link_hwss types and method to decide which oneWenjing Liu1-0/+3
[why] as we add more link_hwss we are making a generic way to determine which type of link_hwss we should use. Later on we may think of introduce a link policy layer. it could be a thin layer that decide the type of link_hwss we use. So instead of passing in link and link_res we can just pass in link_policy and swtich based on link_policy->get_link_hwss_type. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: abstract encoder related hwseq across different typesWenjing Liu2-0/+23
[why] Current we have hundreds of if/else or switch statement to check encoder type in dc_link level. The reason is because depending on the type of encoder dc_link needs to perform similar programming task but with different encoder interfaces. The story is to abstract these interfaces so dc_link can just perform the programming task without knowing the detail of which encoder it's dealing with. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Drop DCN for DP2.x logicWenjing Liu8-30/+2
[Why & How] DCN guard is not necessary for DP2.x relevant logic. Drop them. v2: squash in fix for misplaced #endif (Alex) Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: factor out dp detection link training and mst top detectionWenjing Liu1-5/+2
[why] dc_link_detect_helper has multiple purpose: 1. Detect link and local sink. 2. Verify link capability by performing detection link training. 3. Start mst topology discovery and if succeeded fails the current interface. This is difficult to maintain as item 2 has become more destructive to current dc state. The change is to decouple these sequences to its own functions. Eventually only item 2 is a destructive method and we will redesign this sequence with a more unified policy across different encoder types. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Fix for otg synchronization logicMeenakshikumar Somasundaram2-0/+12
[Why] During otg sync trigger, plane states are used to decide whether the otg is already synchronized or not. There are scenarions when otgs are disabled without plane state getting disabled and in such case the otg is excluded from synchronization. [How] Introduced pipe_idx_syncd in pipe_ctx that tracks each otgs master pipe. When a otg is disabled/enabled, pipe_idx_syncd is reset to itself. On sync trigger, pipe_idx_syncd is checked to decide whether a otg is already synchronized and the otg is further included or excluded from synchronization. v2: Don't drop is_blanked logic Reviewed-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Cc: torvalds@linux-foundation.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-16Merge tag 'drm-next-2022-01-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+2
Pull drm fixes from Daniel Vetter: "drivers fixes: - i915 fixes for ttm backend + one pm wakelock fix - amdgpu fixes, fairly big pile of small things all over. Note this doesn't yet containe the fixed version of the otg sync patch that blew up - small driver fixes: meson, sun4i, vga16fb probe fix drm core fixes: - cma-buf heap locking - ttm compilation - self refresh helper state check - wrong error message in atomic helpers - mipi-dbi buffer mapping" * tag 'drm-next-2022-01-14' of git://anongit.freedesktop.org/drm/drm: (49 commits) drm/mipi-dbi: Fix source-buffer address in mipi_dbi_buf_copy drm: fix error found in some cases after the patch d1af5cd86997 drm/ttm: fix compilation on ARCH=um dma-buf: cma_heap: Fix mutex locking section video: vga16fb: Only probe for EGA and VGA 16 color graphic cards drm/amdkfd: Fix ASIC name typos drm/amdkfd: Fix DQM asserts on Hawaii drm/amdgpu: Use correct VIEWPORT_DIMENSION for DCN2 drm/amd/pm: only send GmiPwrDnControl msg on master die (v3) drm/amdgpu: use spin_lock_irqsave to avoid deadlock by local interrupt drm/amdgpu: not return error on the init_apu_flags drm/amdkfd: Use prange->update_list head for remove_list drm/amdkfd: Use prange->list head for insert_list drm/amdkfd: make SPDX License expression more sound drm/amdkfd: Check for null pointer after calling kmemdup drm/amd/display: invalid parameter check in dmub_hpd_callback Revert "drm/amdgpu: Don't inherit GEM object VMAs in child process" drm/amd/display: reset dcn31 SMU mailbox on failures drm/amdkfd: use default_groups in kobj_type drm/amdgpu: use default_groups in kobj_type ...
2022-01-10Revert "drm/amd/display: Fix for otg synchronization logic"Linus Torvalds2-12/+0
This reverts commit a896f870f8a5f23ec961d16baffd3fda1f8be57c. It causes odd flickering on my Radeon RX580 (PCI ID 1002:67df rev e7, subsystem ID 1da2:e353). Bisected right to this commit, and reverting it fixes things. Link: https://lore.kernel.org/all/CAHk-=wg9hDde_L3bK9tAfdJ4N=TJJ+SjO3ZDONqH5=bVoy_Mzg@mail.gmail.com/ Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Dave Airlie <airlied@gmail.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Jun Lei <Jun.Lei@amd.com> Cc: Mustapha Ghaddar <mustapha.ghaddar@amd.com> Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Cc: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com> Cc: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-07drm/amd/display: unhard code link to phy idx mapping in dc link and clean upWenjing Liu1-0/+1
[why] 1. Current code hard codes link to PHY mapping in dc link level per asic per revision. This is not scalable. In long term the mapping will be obatined from DMUB and store in dc resource. 2. Depending on DCN revision and endpoint type, the definition of dio_output_idx dio_output_type and phy_idx are not consistent. We need to unify the meaning of these hardware indices across different system configuration. [how] 1. Temporarly move the hardcoded mapping to dc_resource level, which should have full awareness of asic specific configuration and add a TODO comment to move the mapping to DMUB. 2. populate dio_output_idx/phy_idx for all configuration, define usb4_enabled bit instead of dio_output_type as an external enum. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: get and restore link res mapWenjing Liu1-0/+5
[why] When reboot the link res map should be persisted. So during boot up, driver will look at the map to determine which link should take priority to use certain link res. This is to ensure that link res remains unshuffled after a reboot. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: support dynamic HPO DP link encoder allocationWenjing Liu4-3/+10
[why] When there are more DP2.0 RXs connected than the number HPO DP link encoders we have, we need to dynamically allocate HPO DP link encoder to the port that needs it. [how] Only allocate HPO DP link encoder when it is needed. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: populate link res in both detection and validationWenjing Liu1-0/+4
[why] This commit is to populate link res in preparation of the next commit. The next commit will replace all existing code to use link res instead Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: define link res and make it accessible to all link interfacesWenjing Liu4-8/+28
[why] There will be a series of re-arch changes in Link Resource Management. They are more and more muxable link resource objects and the resource is insufficient for a one to one allocation to all links created. Therefore a link resource sharing logic is required to determine which link should use certain link resource. This commit is the first one in this series that starts by defining a link resource struct, this struct will be available to all interfaces that need to perform link programming sequence. In later commits, we will granduately decouple link resource objects out of dc link. So instead of access a link resource from dc link. Current link's resource can be accessible through pipe_ctx->link_res during commit, or by calling dc_link_get_cur_link_res function with current link passed in after commit. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: implement dc_mode_memclkMartin Leung3-0/+9
why: Need interface to lower clocks when in dc (power save) mode. Must be able to work with p_state unsupported cases Can cause flicker when OS notifies us of dc state change how: added dal3 interface for KMD added pathway to query smu for this softmax added blank before clock change to override underflow added logic to change clk based on pstatesupport and softmax added logic in prepare/optimize_bw to conform while changing clocks Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-07drm/amd/display: Move link_enc init logic to DCJude Shih1-0/+1
[Why] We shouldn't be accessing res_pool funcs from DM level, therefore, we should create API and let the flow be done in DC level. [How] We create new interface dp_get_link_enc to access and get the correct link_enc Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Jude Shih <shenshih@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-01drm/amd/display: add function for eDP and backlight power onEvgenii Krasnikov1-0/+1
[HOW&WHY] Add function to be used for early eDP power on Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Evgenii Krasnikov <Evgenii.Krasnikov@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-01drm/amd/display: Fix for otg synchronization logicMeenakshikumar Somasundaram2-0/+12
[Why] During otg sync trigger, plane states are used to decide whether the otg is already synchronized or not. There are scenarions when otgs are disabled without plane state getting disabled and in such case the otg is excluded from synchronization. [How] Introduced pipe_idx_syncd in pipe_ctx that tracks each otgs master pipe. When a otg is disabled/enabled, pipe_idx_syncd is reset to itself. On sync trigger, pipe_idx_syncd is checked to decide whether a otg is already synchronized and the otg is further included or excluded from synchronization. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-24drm/amd/display: Rename dcn_validate_bandwidth to dcn10_validate_bandwidthZhan Liu1-1/+1
[Why] Rename function name so it aligns with other resource function names being used by dcn10. [How] Rename function name for consistency. Reviewed-by: Ahmad Othman <Ahmad.Othman@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-22drm/amd/display: fixed the DSC power off sequence during Driver PnPYi-Ling Chen2-0/+4
[WHY] After unloading driver, driver would not disable DSC function. At next loading driver, driver would power all DSC engines off. When driver powered the active DSC off, the screen would be gray until reprograming DSC relatived register correcntly. [HOW] 1. Remove DSC Power down code into init_pipes() 2. Depend on the OTG mapping information and DSC status to skip power off for the working DSC. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-22drm/amd/display: Enable DSC over eDPMikita Lipski1-0/+1
[why] - Adding a DM interface to enable DSC over eDP on Linux - DSC over eDP will allow to power savings by reducing the bandwidth required to support panel's modes - Apply link optimization algorithm to reduce link bandwidth when DSC is enabled [how] - Read eDP panel's DSC capabilities - Apply DSC policy on eDP panel based on its DSC capabilities - Enable DSC encoder's on the pipe - Enable DSC on panel's side by setting DSC_ENABLE DPCD register - Adding link optimization algorithm to reduce link rate or lane count based Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-22drm/amd/display: Reset fifo after enable otgXu, Jinze1-0/+4
[Why] In fast boot sequence, when change dispclk, otg is disabled but digfe is enabled. This may cause dig fifo error. [How] Reset dig fifo after enable otg. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-22drm/amd/display: Code change for DML isolationJun Lei1-0/+34
[why] DML itself is SW only, putting the logic as part of resource makes it hw dependent and thus impossible to compile separately from dc. Separate compilation is critical for unit testing as well as bbox tool development [how] create new dml wrapper. Copy logic from the validation functions into dml wrapper as base implementation. Dml wrapper has internal/static implementations for all helpers, and does not reference other functions. It may reference dc structures/types for convenience. This change now has all the changes for DML isolation squashed into one. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Jun Lei <jun.lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-17drm/amd/display: Initialise encoder assignment when initialising dc_stateJimmy Kizito1-1/+1
[Why] Link encoder assignment tracking variables need to be (re)initialised whenever dc_state is (re)initialised. Otherwise variables used for dynamic encoder assignment (especially the link encoder availability pool) are out of sync with dc_state and future encoder assignments are invalid. [How] Initialise encoder assignment variables when creating new dc_state resource. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03drm/amd/display: Add MPC meory shutdown supportJake Wang1-0/+1
[Why & How] The MPC memory clocks should be powered down when not in use. Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03drm/amd/display: Added HPO HW control shutdown supportJake Wang1-0/+1
[Why] HPO is only used for DP2.0. HPO HW control should be disable when not being used to save power. [How] Shutdown HPO HW control during init hw. Shutdown HPO HW control during stream disable. Enable HPO HW control during stream enable if DP2.0. Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: implement decide lane settingsWenjing Liu1-7/+9
[why] Decouple lane settings decision logic all to its own function. The function takes in lane adjust array and link training settings and decide what hw lane setting and dpcd lane setting should be used. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Defer GAMCOR and DSCL power down sequence to vupdateMichael Strauss1-0/+2
[WHY] Every other CM LUT power down sequence is deferred to next vupdate as memory powerdown updates immediately while selecting LUTs is double buffered. Previous update to defer LUT power down missed GAMCOR and DSCL, causing some visible flicker when entering/exiting fullscreen video playback. [HOW] Update dpp deferred update loop to check for valid DPPs in res_pool instead of referencing dcn_ip which turns out to not be populated during runtime. Move GAMCOR and DSCL powerdown to dpp deferred updates. Reviewed-by: Haonan Wang <Haonan.Wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Disable dsc root clock when not being usedJake Wang1-0/+9
[Why & How] Disable root clock for dsc when not being used. Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Do not skip link training on DP quick hot plugJimmy Kizito1-1/+1
[Why] When rapidly plugging and unplugging a DP sink, detection link training can be mistakenly skipped. This is due to the hotplug processing occurring before the encoder assignment logic has had a chance to process the removal of a stream. The encoder that would be used for detection link training is then erroneously reported as already in use and detection link training is skipped. [How] During hot plug processing, only determine a link encoder to be unavailable for a particular link if it has been assigned to a different link. Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: Add debug flags for USB4 DP link training.Jimmy Kizito1-0/+3
[Why & How] Additional debug flags that can be useful for testing USB4 DP link training. Add flags: - 0x2 : Forces USB4 DP link to non-LTTPR mode - 0x4 : Extends status read intervals to about 60s. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: Read USB4 DP tunneling data from DPCD.Jimmy Kizito1-0/+7
[Why] We requires information from DPCD in order to identify USB4 DP tunneling targets. [How] Add USB4 DP tunneling fields to DPCD struct and populate these fields during sink detection. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: Implement DPIA clock recovery phaseJimmy Kizito1-0/+40
[Why] Clock recovery is the mandatory first phase of DP link training. [How] - Implement clock recovery phase in DPIA training module. - Add helper functions for building SET_CONFIG messages. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: Implement DPIA training loopJimmy Kizito1-0/+10
[Why] Training of DPIA link differs enough from that of conventional DP link to warrant a separate implementation. [How] - Implement top-level of DPIA training loop. - Make functions shared between DP and DPIA link training "public". Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: Add stub to get DPIA tunneling device dataJimmy Kizito1-0/+39
[why & how] 1. Add stub for getting tunneling device data 2. Add check for phy_repeater_cnt < 0xff to LTTPR check 3. Add two more bits of information to DPIA links Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-06-29 13:23:32 +0000