summaryrefslogtreecommitdiffstats
path: root/drivers/gpio/gpio-pl061.c
AgeCommit message (Collapse)AuthorFilesLines
2022-10-24gpio: pl061: Add missing header(s)Andy Shevchenko1-7/+8
Do not imply that some of the generic headers may be always included. Instead, include explicitly what we are direct user of. While at it, sort headers alphabetically. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-04-19gpio: pl061: Make the irqchip immutableMarc Zyngier1-9/+23
Prevent gpiolib from messing with the irqchip by advertising the irq_chip structure as immutable, making it const, and adding the various calls that gpiolib relies upon. Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220419141846.598305-6-maz@kernel.org
2021-08-12gpio: Bulk conversion to generic_handle_domain_irq()Marc Zyngier1-2/+2
Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-04-14gpio: pl061: Support building as moduleRob Herring1-5/+4
Enable building the PL061 GPIO driver as a module. This does change the initcall level when built-in. This shouldn't be a problem as any user should support deferred probe by now. A scan of DT based platforms at least didn't reveal any users that would be a problem. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-04-02gpio: Unconditionally assign .request()/.free()Thierry Reding1-5/+2
The gpiochip_generic_request() and gpiochip_generic_free() functions can now deal properly with chips that don't have any pin-ranges defined, so they can be assigned unconditionally. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200401200527.2982450-1-thierry.reding@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-25gpio: pl061: Warn when IRQ line has not been configuredAlexander Sverdlin1-4/+2
Existing (irq < 0) condition is always false because adev->irq has unsigned type and contains 0 in case of failed irq_of_parse_and_map(). Up to now all the mapping errors were silently ignored. Seems that repairing this check would be backwards-incompatible and might break the probe() for the implementations without IRQ support. Therefore warn the user instead. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-11-07gpio: Use new GPIO_LINE_DIRECTIONMatti Vaittinen1-1/+4
It's hard for occasional GPIO code reader/writer to know if values 0/1 equal to IN or OUT. Use defined GPIO_LINE_DIRECTION_IN and GPIO_LINE_DIRECTION_OUT to help them out. NOTE - for gpio-amd-fch and gpio-bd9571mwv: This commit also changes the return value for direction get to equal 1 for direction INPUT. Prior this commit these drivers might have returned some other positive value but 1 for INPUT. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-09Merge tag 'gpio-v5.3-1' of ↵Linus Torvalds1-14/+16
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the big slew of GPIO changes for the v5.3 kernel cycle. This is mostly incremental work this time. Three important things: - The FMC subsystem is deleted through my tree. This happens through GPIO as its demise was discussed in relation to a patch decoupling its GPIO implementation from the standard way of handling GPIO. As it turns out, that is not the only subsystem it reimplements and the authors think it is better do scratch it and start over using the proper kernel subsystems than try to polish the rust shiny. See the commit (ACKed by the maintainers) for details. - Arnd made a small devres patch that was ACKed by Greg and goes into the device core. - SPDX header change colissions may happen, because at times I've seen that quite a lot changed during the -rc:s in regards to SPDX. (It is good stuff, tglx has me convinced, and it is worth the occasional pain.) Apart from this is is nothing controversial or problematic. Summary: Core: - When a gpio_chip request GPIOs from itself, it can now fully control the line characteristics, both machine and consumer flags. This makes a lot of sense, but took some time before I figured out that this is how it has to work. - Several smallish documentation fixes. New drivers: - The PCA953x driver now supports the TI TCA9539. - The DaVinci driver now supports the K3 AM654 SoCs. Driver improvements: - Major overhaul and hardening of the OMAP driver by Russell King. - Starting to move some drivers to the new API passing irq_chip along with the gpio_chip when adding the gpio_chip instead of adding it separately. Unrelated: - Delete the FMC subsystem" * tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits) Revert "gpio: tegra: Clean-up debugfs initialisation" gpiolib: Use spinlock_t instead of struct spinlock gpio: stp-xway: allow compile-testing gpio: stp-xway: get rid of the #include <lantiq_soc.h> dependency gpio: stp-xway: improve module clock error handling gpio: stp-xway: simplify error handling in xway_stp_probe() gpiolib: Clarify use of non-sleeping functions gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants gpiolib: Document new gpio_chip.init_valid_mask field Documentation: gpio: Fix reference to gpiod_get_array() gpio: pl061: drop duplicate printing of device name gpio: altera: Pass irqchip when adding gpiochip gpio: siox: Use devm_ managed gpiochip gpio: siox: Add struct device *dev helper variable gpio: siox: Pass irqchip when adding gpiochip drivers: gpio: amd-fch: make resource struct const devres: allow const resource arguments gpio: ath79: Pass irqchip when adding gpiochip gpio: tegra: Clean-up debugfs initialisation gpio: siox: Switch to IRQ_TYPE_NONE ...
2019-07-03gpio: pl061: drop duplicate printing of device nameEnrico Weigelt1-1/+1
The dev_info() call already prints the device name, so there's no need to explicitly include it in the message for second time. Signed-off-by: Enrico Weigelt <info@metux.net> Link: https://lore.kernel.org/r/1562146944-4162-1-git-send-email-info@metux.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-27gpio: pl061: Pass irqchip when adding gpiochipLinus Walleij1-14/+16
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For chained irqchips this is a pretty straight-forward conversion. Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-05gpio: pl061: Move irq_chip definition inside struct pl061Manivannan Sadhasivam1-11/+10
Keeping the irq_chip definition static will make it shared with multiple giochips in the system. This practice is considered to be bad and now we will get the below warning from gpiolib core: "detected irqchip that is shared with multiple gpiochips: please fix the driver." Hence, move the irq_chip definition from static to `struct pl061` for using a unique irq_chip for each gpiochip. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-24gpio: pl061: Include the right headerLinus Walleij1-1/+1
This is a GPIO driver, include only <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Move irqdomain into struct gpio_irq_chipThierry Reding1-1/+1
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31gpio: pl061: constify amba_idArvind Yadav1-1/+1
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: pl061: make use of raw_spinlock variantsJulia Cartwright1-14/+14
The pl061 gpio driver currently implements an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07gpio: pl061: delete platform data handlingLinus Walleij1-38/+3
Platform data is a remnant of board files and all boards using the PL061 have been migrated to use device tree or ACPI instead. The custom mechanism to set line by default as inputs/outputs has been superceded by the GPIO-internal hogging mechanism. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07gpio: pl061: move platform data into driverLinus Walleij1-1/+13
No boardfile defines any PL061 platform data anymore: the Integrator IM/PD-1 includes the file but is not making use of the struct. Let's delete the include and all references, then move the platform data into the driver for later consolidation into the driver state container. The only resource defined by the IM/PD-1 is the IRQ which is passed through the AMBA PrimeCell bus abstraction struct amba_device. Cc: arm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07gpio: pl061: rename variable from chip to pl061Linus Walleij1-93/+93
Rename the local variable "chip" referring to the struct pl061 state container to "pl061": we already have gpio_chip and irq_chip in the driver, we are needlessly adding yet another "chip" to the confusion. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07gpio: pl061: rename state container structLinus Walleij1-15/+15
The PL061 state container is named "pl061_gpio", let's rename it to simply pl061. Less is more. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07gpio: pl061: use local state for parent IRQ storageLinus Walleij1-1/+4
The driver is poking around in the struct gpio_chip internals, which is a no-no. Use a variable in the local state container. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-28gpio: pl061: implement .get_direction()Linus Walleij1-0/+8
Implement this callback so that the driver reports correctly the direction setting of each line. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-28gpio: pl061: remove range checkLinus Walleij1-6/+0
The gpiochip calls are already checking that the GPIO line offsets are in range. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31gpio: pl061: make explicitly non-modularPaul Gortmaker1-8/+4
The Kconfig for this driver is currently: config GPIO_PL061 bool "PrimeCell PL061 GPIO support" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modularity, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: pl061: use gpiochip data pointerLinus Walleij1-10/+10
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-14gpio: pl061: add support for wakeup configurationSudeep Holla1-0/+9
The PL061 supports interrupts and those can be wakeup interrupts. We need to provide support for configuring those interrupts as wakeup sources. This patch adds irq_set_wake callback for PL061 so that GPIO interrupts can be configured as wakeup. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19gpio: change member .dev to .parentLinus Walleij1-6/+6
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16gpio: pl061: use the generic request/free implementationsJonas Gorski1-28/+4
Instead of storing in the chip data whether the chip uses pinctrl and conditionally call pinctrl_{request,free}_gpio, just don't populate request/free in that case. This makes the implementations trivial and the same as the generic implementations, thus we can just use them. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-15gpio: pl061: assign the apropriate handler for irqsLinus Walleij1-5/+25
The PL061 can handle level IRQs and edge IRQs, however it is just utilizing handle_simple_irq() for all IRQs. Inspired by Stefan Agners patch to vf610, this assigns the right handler depending on what type is set up, and after this handle_bad_irq() is only used as default and if the type is not specified, as is done in the OMAP driver: defining the IRQ type is really not optional for this driver. The interrupt handler was just writing the interrupt clearing register for all lines that were high when entering the handling loop, this is wrong: that register is only supposed to be written (on a per-line basis) for edge IRQs, so this ACK was moved to the .irq_ack() callback as is proper. Tested with PL061 on the ARM RealView PB11MPCore and the MMC/SC card detect GPIO. Cc: Jonas Gorski <jogo@openwrt.org> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-15gpio: pl061: returning with lock held in pl061_irq_type()Dan Carpenter1-6/+7
We were returning with "chip->lock" held by mistake. It's safe to move the return to before we take the spinlock. Fixes: 1dbf7f299f90 ('gpio: pl061: detail IRQ trigger handling') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: pl061: detail IRQ trigger handlingLinus Walleij1-8/+47
I couldn't follow this code flow. Make it dirt simple to figure out what is going on and get proper debug prints. Warn if we set up an IRQ without any trigger. Should make no semantic difference. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner1-1/+1
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2014-12-03gpio: pl061: hook request if gpio-ranges avaiableYunlei He1-6/+14
Gpio-ranges property is useful to represent which GPIOs correspond to which pins on which pin controllers. But there may be some gpios without pinctrl operation. So check whether gpio-ranges property exists in device node first. Signed-off-by: Yunlei He <heyunlei@huawei.com> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-03gpio: pl061: use BIT() macro instead of shifting bitsJavier Martinez Canillas1-13/+13
Using the BIT() macro instead of shifting bits makes the code less error prone and also more readable. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-28gpio: pl061/sx150x: Remove unneeded include of linux/workqueue.hAxel Lin1-1/+0
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-26gpio: pl061: convert driver to use gpiolib irqchipLinus Walleij1-62/+18
This converts the PL061 driver to register its chained irq handler and irqchip using the helpers in the gpiolib core. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-18gpio: switch drivers to use new callbackLinus Walleij1-7/+7
This switches all GPIO and pin control drivers with irqchips that were using .startup() and .shutdown() callbacks to lock GPIO lines for IRQ usage over to using the .request_resources() and .release_resources() callbacks just introduced into the irqchip vtable. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-07gpio: gpio-pl061: Use %pa to print 'resource_size_t'Fabio Estevam1-2/+2
The following build warning is generated when building multi_v7_defconfig with LPAE option selected: drivers/gpio/gpio-pl061.c:358:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] Fix it by using %pa to print 'resource_size_t'. Reported-by: Olof's autobuilder <build@lixom.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-24gpio: pl061: Use devm_ioremap_resource()Jingoo Han1-12/+3
Use devm_ioremap_resource() in order to make the code simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-03gpio: pl061: remove confusing namingLinus Walleij1-3/+2
Drop the " gpio" suffix after the pl061 irq_chip name: this is only confusing: an irqchip name should be a single, short, simple string that looks nice in /proc/interrupts. Drop the nameing of each individual IRQ to "pl061" - I think this naming function is for naming the IRQ line, not for boilerplating them all with the name of the parent controller, which is already known from the .name field of the irq_chip. Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Deepak Sikri <deepak.sikri@st.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-03gpio: pl061: refactor type settingLinus Walleij1-12/+14
Refactor this function so that I can understand it, do one big read/modify/write operation and have the bitmask in a variable instead of recalculating it every time it's needed. Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Deepak Sikri <deepak.sikri@st.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-03gpio: pl061: lock IRQs when starting themLinus Walleij1-0/+22
This uses the new API for tagging GPIO lines as in use by IRQs. This enforces a few semantic checks on how the underlying GPIO line is used. Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Deepak Sikri <deepak.sikri@st.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-03gpio: pl061: proper error messagesLinus Walleij1-5/+17
This makes the PL061 driver print proper error messages when probe fails, and also tell us when the chip is finally registered. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-27gpio: pl061: move irqdomain initializationLinus Walleij1-5/+5
The PL061 driver had the irqdomain initialization in an unfortunate place: when used with device tree (and thus passing the base IRQ 0) the driver would work, as this registers an irqdomain and waits for mappings to be done dynamically as the devices request their IRQs, whereas when booting using platform data the irqdomain core would attempt to allocate IRQ descriptors dynamically (which works fine) but also to associate the irq_domain_associate_many() on all IRQs, which in turn will call the mapping function which at this point will try to set the type of the IRQ and then tries to acquire a non-initialized spinlock yielding a backtrace like this: CPU: 0 PID: 1 Comm: swapper Not tainted 3.13.0-rc1+ #652 Backtrace: [<c0016f0c>] (dump_backtrace) from [<c00172ac>] (show_stack+0x18/0x1c) r6:c798ace0 r5:00000000 r4:c78257e0 r3:00200140 [<c0017294>] (show_stack) from [<c0329ea0>] (dump_stack+0x20/0x28) [<c0329e80>] (dump_stack) from [<c004fa80>] (__lock_acquire+0x1c0/0x1b80) [<c004f8c0>] (__lock_acquire) from [<c0051970>] (lock_acquire+0x6c/0x80) r10:00000000 r9:c0455234 r8:00000060 r7:c047d798 r6:600000d3 r5:00000000 r4:c782c000 [<c0051904>] (lock_acquire) from [<c032e484>] (_raw_spin_lock_irqsave+0x60/0x74) r6:c01a1100 r5:800000d3 r4:c798acd0 [<c032e424>] (_raw_spin_lock_irqsave) from [<c01a1100>] (pl061_irq_type+0x28/0x) r6:00000000 r5:00000000 r4:c798acd0 [<c01a10d8>] (pl061_irq_type) from [<c0059ef4>] (__irq_set_trigger+0x70/0x104) r6:00000000 r5:c01a10d8 r4:c046da1c r3:c01a10d8 [<c0059e84>] (__irq_set_trigger) from [<c005b348>] (irq_set_irq_type+0x40/0x60) r10:c043240c r8:00000060 r7:00000000 r6:c046da1c r5:00000060 r4:00000000 [<c005b308>] (irq_set_irq_type) from [<c01a1208>] (pl061_irq_map+0x40/0x54) r6:c79693c0 r5:c798acd0 r4:00000060 [<c01a11c8>] (pl061_irq_map) from [<c005d27c>] (irq_domain_associate+0xc0/0x190) r5:00000060 r4:c046da1c [<c005d1bc>] (irq_domain_associate) from [<c005d604>] (irq_domain_associate_man) r8:00000008 r7:00000000 r6:c79693c0 r5:00000060 r4:00000000 [<c005d5d0>] (irq_domain_associate_many) from [<c005d864>] (irq_domain_add_simp) r8:c046578c r7:c035b72c r6:c79693c0 r5:00000060 r4:00000008 r3:00000008 [<c005d814>] (irq_domain_add_simple) from [<c01a1380>] (pl061_probe+0xc4/0x22c) r6:00000060 r5:c0464380 r4:c798acd0 [<c01a12bc>] (pl061_probe) from [<c01c0450>] (amba_probe+0x74/0xe0) r10:c043240c r9:c0455234 r8:00000000 r7:c047d7f8 r6:c047d744 r5:00000000 r4:c0464380 This moves the irqdomain initialization to a point where the spinlock and GPIO chip are both fully propulated, so the callbacks can be used without crashes. I had some problem reproducing the crash, as the devm_kzalloc():ed zeroed memory would seemingly mask the spinlock as something OK, but by poisoning the lock like this: u32 *dum; dum = (u32 *) &chip->lock; *dum = 0xaaaaaaaaU; I could reproduce, fix and test the patch. Reported-by: Russell King <linux@arm.linux.org.uk> Cc: Rob Herring <robherring2@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-16gpio: pl061: drop references to "virtual" IRQLinus Walleij1-5/+5
Rename the argument "virq" to just "irq", this IRQ isn't any more "virtual" than any other Linux IRQ number, we use "hwirq" for the actual hw-numbers, "virq" is just bogus. Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16gpio: use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-02Merge tag 'cleanup-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanup from Olof Johansson: "Here is a collection of cleanup patches. Among the pieces that stand out are: - The deletion of h720x platforms - Split of at91 non-dt platforms to their own Kconfig file to keep them separate - General cleanups and refactoring of i.MX and MXS platforms - Some restructuring of clock tables for OMAP - Convertion of PMC driver for Tegra to dt-only - Some renames of sunxi -> sun4i (Allwinner A10) - ... plus a bunch of other stuff that I haven't mentioned" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: i.MX: remove unused ARCH_* configs ARM i.MX53: remove platform ahci support ARM: sunxi: Rework the restart code irqchip: sunxi: Rename sunxi to sun4i irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro clocksource: sunxi: Rename sunxi to sun4i clocksource: sunxi: make use of CLKSRC_OF clocksource: sunxi: Cleanup the timer code ARM: at91: remove trailing semicolon from macros ARM: at91/setup: fix trivial typos ARM: EXYNOS: remove "config EXYNOS_DEV_DRM" ARM: EXYNOS: change the name of USB ohci header ARM: SAMSUNG: Remove unnecessary code for dma ARM: S3C24XX: Remove unused GPIO drive strength register definitions ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412 ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410 ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC" ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI" ...
2013-03-27gpio: pl061: Add pl061_gpio_free()Axel Lin1-0/+8
commit 39b70ee051 "gpio: pl061: bind pinctrl by gpio request" adds pl061_gpio_request() to request pinctrl. Thus we need to add corresponding pl061_gpio_free() to free the pin. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-26arm: Move chained_irq_(enter|exit) to a generic fileCatalin Marinas1-1/+1
These functions have been introduced by commit 10a8c383 (irq: introduce entry and exit functions for chained handlers) in asm/mach/irq.h. This patch moves them to linux/irqchip/chained_irq.h so that generic irqchip drivers do not rely on architecture specific header files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2013-03-07gpio: pl061: bind pinctrl by gpio requestHaojian Zhuang1-0/+13
Add the pl061_gpio_request() to request pinctrl. Create the logic between pl061 gpio driver and pinctrl (pinctrl-single) driver. While a gpio pin is requested, it will request pinctrl driver to set that pin with gpio function mode. So pinctrl driver should append .gpio_request_enable() in pinmux_ops. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-30 14:45:06 +0000