summaryrefslogtreecommitdiffstats
path: root/drivers/crypto/stm32
AgeCommit message (Collapse)AuthorFilesLines
2022-12-09crypto: stm32/cryp - enable for use with Ux500Linus Walleij1-91/+322
This adds a few small quirks to handle the differences between the STM32 and Ux500 cryp blocks. The following differences are handled with special bool switch bits in the capabilities: - The main difference is that some registers are removed, so we add register offsets for all registers in the per-variant data. Then we assign the right offsets for Ux500 vs the STM32 variants. - The Ux500 does not support the aeads algorithms; gcm(aes) and ccm(aes). Avoid registering them when running on Ux500. - The Ux500 has a special "linear" key format and does some elaborare bit swizzling of the key bits before writing them into the key registers. This is written as an "application note" inside the DB8500 design specification, and seems to be the result of some mishap when assigning the data lines to register bits. (STM32 has clearly fixed this.) - The Ux500 does not have the KP "key prepare" bit in the CR register. Instead, we need to set the KSE bit, "key schedule encryption" bit which does the same thing but is in bit 11 rather than being a special "algorithm type" as on STM32. The algorithm must however be specified as AES ECB while doing this. - The Ux500 cannot just read out IV registers, we need to set the KEYRDEN "key read enable" bit, as this protects not just the key but also the IV from being read out. Enable this bit before reading out the IV and disable it afterwards. Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Acked by: Lionel Debieve <lionel.debieve@foss.st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-12-09crypto: stm32 - enable drivers to be used on Ux500Linus Walleij1-2/+2
The Ux500 cryp and hash drivers are older versions of the hardware managed by the stm32 driver. Instead of trying to improve the Ux500 cryp and hash drivers, start to switch over to the modern and more well-maintained STM32 drivers. Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Acked-by: Lionel Debieve <lionel.debieve@foss.st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-10-21crypto: stm32 - Fix spelling mistake "wite" -> "write"Colin Ian King1-2/+2
There are a couple of spelling mistakes in dev_err messages. Fix them. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: nicolas.toromanoff@foss.st.com Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-25crypto: stm32 - fix reference leak in stm32_crc_removeZheng Yongjun1-1/+3
pm_runtime_get_sync() will increment pm usage counter even it failed. Forgetting to call pm_runtime_put_noidle will result in reference leak in stm32_crc_remove, so we should fix it. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-12-31crypto: stm32/crc32 - Fix kernel BUG triggered in probe()Marek Vasut1-2/+2
The include/linux/crypto.h struct crypto_alg field cra_driver_name description states "Unique name of the transformation provider. " ... " this contains the name of the chip or provider and the name of the transformation algorithm." In case of the stm32-crc driver, field cra_driver_name is identical for all registered transformation providers and set to the name of the driver itself, which is incorrect. This patch fixes it by assigning a unique cra_driver_name to each registered transformation provider. The kernel crash is triggered when the driver calls crypto_register_shashes() which calls crypto_register_shash(), which calls crypto_register_alg(), which calls __crypto_register_alg(), which returns -EEXIST, which is propagated back through this call chain. Upon -EEXIST from crypto_register_shash(), the crypto_register_shashes() starts unregistering the providers back, and calls crypto_unregister_shash(), which calls crypto_unregister_alg(), and this is where the BUG() triggers due to incorrect cra_refcnt. Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module") Signed-off-by: Marek Vasut <marex@denx.de> Cc: <stable@vger.kernel.org> # 4.12+ Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Fabien Dessenne <fabien.dessenne@st.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Lionel Debieve <lionel.debieve@st.com> Cc: Nicolas Toromanoff <nicolas.toromanoff@st.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-crypto@vger.kernel.org Acked-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-12-11crypto: stm32 - Revert broken pm_runtime_resume_and_get changesHerbert Xu2-4/+5
We should not call pm_runtime_resume_and_get where the reference count is expected to be incremented unconditionally. This patch reverts these calls to the original unconditional get_sync call. Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Fixes: 747bf30fd944 ("crypto: stm32/cryp - Fix PM reference leak...") Fixes: 1cb3ad701970 ("crypto: stm32/hash - Fix PM reference leak...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-12-11crypto: stm32/cryp - reorder hw initializationNicolas Toromanoff1-13/+26
The CRYP IP checks the written key depending of the configuration, it's safer to write the whole configuration to hardware then the key to avoid unexpected key rejection. Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-12-11crypto: stm32/cryp - fix bugs and crash in testsNicolas Toromanoff1-547/+243
Extra crypto manager auto test were crashing or failling due to 2 reasons: - block in a dead loop (dues to issues in cipher end process management) - crash due to read/write unmapped memory (this crash was also reported when using openssl afalg engine) Rework interrupt management, interrupts are masked as soon as they are no more used: if input buffer is fully consumed, "Input FIFO not full" interrupt is masked and if output buffer is full, "Output FIFO not empty" interrupt is masked. And crypto request finish when input *and* outpout buffer are fully read/write. About the crash due to unmapped memory, using scatterwalk_copychunks() that will map and copy each block fix the issue. Using this api and copying full block will also fix unaligned data access, avoid early copy of in/out buffer, and make useless the extra alignment constraint. Fixes: 9e054ec21ef8 ("crypto: stm32 - Support for STM32 CRYP crypto module") Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-12-11crypto: stm32/cryp - fix lrw chaining modeNicolas Toromanoff1-1/+1
This fixes the lrw autotest if lrw uses the CRYP as the AES block cipher provider (as ecb(aes)). At end of request, CRYP should not update the IV in case of ECB chaining mode. Indeed the ECB chaining mode never uses the IV, but the software LRW chaining mode uses the IV field as a counter and due to the (unexpected) update done by CRYP while the AES block process, the counter get a wrong value when the IV overflow. Fixes: 5f49f18d27cd ("crypto: stm32/cryp - update to return iv_out") Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-12-11crypto: stm32/cryp - fix double pm exitNicolas Toromanoff1-2/+0
Delete extraneous lines in probe error handling code: pm was disabled twice. Fixes: 65f9aa36ee47 ("crypto: stm32/cryp - Add power management support") Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-12-11crypto: stm32/cryp - check early input dataNicolas Toromanoff1-1/+113
Some auto tests failed because driver wasn't returning the expected error with some input size/iv value/tag size. Now: Return 0 early for empty buffer. (We don't need to start the engine for an empty input buffer). Accept any valid authsize for gcm(aes). Return -EINVAL if iv for ccm(aes) is invalid. Return -EINVAL if buffer size is a not a multiple of algorithm block size. Fixes: 9e054ec21ef8 ("crypto: stm32 - Support for STM32 CRYP crypto module") Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-12-11crypto: stm32/cryp - fix xts and race condition in crypto_engine requestsNicolas Toromanoff1-2/+0
Don't erase key: If key is erased before the crypto_finalize_.*_request() call, some pending process will run with a key={ 0 }. Moreover if the key is reset at end of request, it breaks xts chaining mode, as for last xts block (in case input len is not a multiple of block) a new AES request is started without calling again set_key(). Fixes: 9e054ec21ef8 ("crypto: stm32 - Support for STM32 CRYP crypto module") Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-12-11crypto: stm32/cryp - fix CTR counter carryNicolas Toromanoff1-14/+13
STM32 CRYP hardware doesn't manage CTR counter bigger than max U32, as a workaround, at each block the current IV is saved, if the saved IV lower u32 is 0xFFFFFFFF, the full IV is manually incremented, and set in hardware. Fixes: bbb2832620ac ("crypto: stm32 - Fix sparse warnings") Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-12-11crypto: stm32/cryp - don't print error on probe deferralEtienne Carriere1-1/+2
Change driver to not print an error message when the device probe is deferred for a clock resource. Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com> Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-12-11crypto: stm32/cryp - defer probe for reset controllerEtienne Carriere1-2/+6
Change stm32 CRYP driver to defer its probe operation when reset controller device is registered but has not been probed yet. Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com> Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-16crypto: stm32/cryp - Fix PM reference leak on stm32-cryp.cShixin Liu1-2/+2
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Signed-off-by: Shixin Liu <liushixin2@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-16crypto: stm32/hash - Fix PM reference leak on stm32-hash.cShixin Liu1-4/+4
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Signed-off-by: Shixin Liu <liushixin2@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-14crypto: stm32 - Fix last sparse warning in stm32_cryp_check_ctr_counterHerbert Xu1-1/+1
This patch changes the cast in stm32_cryp_check_ctr_counter from u32 to __be32 to match the prototype of stm32_cryp_hw_write_iv correctly. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: sha - split sha.h into sha1.h and sha2.hEric Biggers1-1/+2
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2, and <crypto/sha3.h> contains declarations for SHA-3. This organization is inconsistent, but more importantly SHA-1 is no longer considered to be cryptographically secure. So to the extent possible, SHA-1 shouldn't be grouped together with any of the other SHA versions, and usage of it should be phased out. Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and <crypto/sha2.h>, and make everyone explicitly specify whether they want the declarations for SHA-1, SHA-2, or both. This avoids making the SHA-1 declarations visible to files that don't want anything to do with SHA-1. It also prepares for potentially moving sha1.h into a new insecure/ or dangerous/ directory. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: stm32/crc32 - Avoid lock if hardware is already usedNicolas Toromanoff2-3/+13
If STM32 CRC device is already in use, calculate CRC by software. This will release CPU constraint for a concurrent access to the hardware, and avoid masking irqs during the whole block processing. Fixes: 7795c0baf5ac ("crypto: stm32/crc32 - protect from concurrent accesses") Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-18crypto: stm32-hash - Simplify with dev_err_probe()Krzysztof Kozlowski1-8/+3
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-08-28crypto: stm32 - Fix sparse warningsHerbert Xu3-24/+32
This patch fixes most of the sparse endianness warnings in stm32. The patch itself doesn't change anything apart from markings, but there is some questionable code in stm32_cryp_check_ctr_counter. That function operates on the counters as if they're in CPU order, however, they're then written out as big-endian. This looks like a genuine bug. Therefore I've left that warning alone until someone can confirm that this really does work as intended on little-endian. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-08-25crypto: stm32 - Add missing header inclusionsHerbert Xu2-0/+3
The stm32 driver was missing a number of includes that we being pulled in by unrelated header files. As the indirect inclusion went away, it now fails to build. This patch adds the missing inclusions. Reported-by: kernel test robot <lkp@intel.com> Fixes: 0c3dc787a62a ("crypto: algapi - Remove skbuff.h inclusion") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-23crypto: stm32/crc32 - protect from concurrent accessesNicolas Toromanoff1-2/+45
Protect STM32 CRC device from concurrent accesses. As we create a spinlocked section that increase with buffer size, we provide a module parameter to release the pressure by splitting critical section in chunks. Size of each chunk is defined in burst_size module parameter. By default burst_size=0, i.e. don't split incoming buffer. Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-23crypto: stm32/crc32 - don't sleep in runtime pmNicolas Toromanoff1-9/+36
Ensure stm32_crc_update() and stm32_crc_init() can be called in atomic context and can't sleep. Add pm_runtime_irq_safe() to make pm_runtime_get_sync() atomic. Change runtime pm to call clk_enable()/clk_disable() and change system pm to unprepare/prepare the clock and force runtime pm suspend/resume. Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-23crypto: stm32/crc32 - fix multi-instanceNicolas Toromanoff1-12/+36
Ensure CRC algorithm is registered only once in crypto framework when there are several instances of CRC devices. Update the CRC device list management to avoid that only the first CRC instance is used. Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module") Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-23crypto: stm32/crc32 - fix run-time self test issue.Nicolas Toromanoff1-3/+3
Fix wrong crc32 initialisation value: "alg: shash: stm32_crc32 test failed (wrong result) on test vector 0, cfg="init+update+final aligned buffer" cra_name="crc32c" expects an init value of 0XFFFFFFFF, cra_name="crc32" expects an init value of 0. Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module") Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-23crypto: stm32/crc32 - fix ext4 chksum BUG_ON()Nicolas Toromanoff1-50/+48
Allow use of crc_update without prior call to crc_init. And change (and fix) driver to use CRC device even on unaligned buffers. Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module") Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-08crypto: stm32/hash - don't print error on probe deferralLionel Debieve1-2/+5
Change driver to not print an error message when the device probe is deferred for a clock resource. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-08crypto: stm32/hash - defer probe for dma deviceEtienne Carriere1-7/+15
Change stm32 HASH driver to defer its probe operation when DMA channel device is registered but has not been probed yet. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Reviewed-by: Lionel DEBIEVE <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-05-08crypto: stm32/hash - defer probe for reset controllerEtienne Carriere1-2/+7
Change stm32 HASH driver to defer its probe operation when reset controller device is registered but has not been probed yet. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Reviewed-by: Lionel DEBIEVE <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-09crypto: remove CRYPTO_TFM_RES_BAD_KEY_LENEric Biggers1-3/+1
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to make the ->setkey() functions provide more information about errors. However, no one actually checks for this flag, which makes it pointless. Also, many algorithms fail to set this flag when given a bad length key. Reviewing just the generic implementations, this is the case for aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309, rfc7539, rfc7539esp, salsa20, seqiv, and xcbc. But there are probably many more in arch/*/crypto/ and drivers/crypto/. Some algorithms can even set this flag when the key is the correct length. For example, authenc and authencesn set it when the key payload is malformed in any way (not just a bad length), the atmel-sha and ccree drivers can set it if a memory allocation fails, and the chelsio driver sets it for bad auth tag lengths, not just bad key lengths. So even if someone actually wanted to start checking this flag (which seems unlikely, since it's been unused for a long time), there would be a lot of work needed to get it working correctly. But it would probably be much better to go back to the drawing board and just define different return values, like -EINVAL if the key is invalid for the algorithm vs. -EKEYREJECTED if the key was rejected by a policy like "no weak keys". That would be much simpler, less error-prone, and easier to test. So just remove this flag. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-27crypto: stm32/hash - Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi1-3/+3
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-11crypto: Kconfig - Fix indentationKrzysztof Kozlowski1-3/+3
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17crypto: stm32 - switch to skcipher APIArd Biesheuvel1-179/+159
Commit 7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface") dated 20 august 2015 introduced the new skcipher API which is supposed to replace both blkcipher and ablkcipher. While all consumers of the API have been converted long ago, some producers of the ablkcipher remain, forcing us to keep the ablkcipher support routines alive, along with the matching code to expose [a]blkciphers via the skcipher API. So switch this driver to the skcipher API, allowing us to finally drop the ablkcipher code in the near future. Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-22crypto: des - split off DES library from generic DES cipher driverArd Biesheuvel1-1/+1
Another one for the cipher museum: split off DES core processing into a separate module so other drivers (mostly for crypto accelerators) can reuse the code without pulling in the generic DES cipher itself. This will also permit the cipher interface to be made private to the crypto API itself once we move the only user in the kernel (CIFS) to this library interface. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-22crypto: stm32/des - switch to new verification routinesArd Biesheuvel1-25/+5
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-09crypto: stm32 - use devm_platform_ioremap_resource() to simplify codeYueHaibing2-6/+2
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-09crypto: drivers - Remove dev_err() usage after platform_get_irq()Stephen Boyd2-6/+2
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: <linux-crypto@vger.kernel.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-19Merge branch 'linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - Fix missed wake-up race in padata - Use crypto_memneq in ccp - Fix version check in ccp - Fix fuzz test failure in ccp - Fix potential double free in crypto4xx - Fix compile warning in stm32 * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: padata: use smp_mb in padata_reorder to avoid orphaned padata jobs crypto: ccp - Fix SEV_VERSION_GREATER_OR_EQUAL crypto: ccp/gcm - use const time tag comparison. crypto: ccp - memset structure fields to zero before reuse crypto: crypto4xx - fix a potential double free in ppc4xx_trng_probe crypto: stm32/hash - Fix incorrect printk modifier for size_t
2019-07-12crypto: stm32/hash - Fix incorrect printk modifier for size_tHerbert Xu1-1/+1
This patch fixes a warning when compiling stm32 because %d is being used on a size_t argument instead of %zd. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-08Merge branch 'linus' of ↵Linus Torvalds3-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 5.3: API: - Test shash interface directly in testmgr - cra_driver_name is now mandatory Algorithms: - Replace arc4 crypto_cipher with library helper - Implement 5 way interleave for ECB, CBC and CTR on arm64 - Add xxhash - Add continuous self-test on noise source to drbg - Update jitter RNG Drivers: - Add support for SHA204A random number generator - Add support for 7211 in iproc-rng200 - Fix fuzz test failures in inside-secure - Fix fuzz test failures in talitos - Fix fuzz test failures in qat" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits) crypto: stm32/hash - remove interruptible condition for dma crypto: stm32/hash - Fix hmac issue more than 256 bytes crypto: stm32/crc32 - rename driver file crypto: amcc - remove memset after dma_alloc_coherent crypto: ccp - Switch to SPDX license identifiers crypto: ccp - Validate the the error value used to index error messages crypto: doc - Fix formatting of new crypto engine content crypto: doc - Add parameter documentation crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR crypto: arm64/aes-ce - add 5 way interleave routines crypto: talitos - drop icv_ool crypto: talitos - fix hash on SEC1. crypto: talitos - move struct talitos_edesc into talitos.h lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE crypto/NX: Set receive window credits to max number of CRBs in RxFIFO crypto: asymmetric_keys - select CRYPTO_HASH where needed crypto: serpent - mark __serpent_setkey_sbox noinline crypto: testmgr - dynamically allocate crypto_shash crypto: testmgr - dynamically allocate testvec_config crypto: talitos - eliminate unneeded 'done' functions at build time ...
2019-07-03crypto: stm32/hash - remove interruptible condition for dmaLionel Debieve1-2/+2
When DMA is used, waiting for completion must not be interruptible as it can generate an error that is not handle by the driver. There is no need to put the completion interruptible in this driver. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-03crypto: stm32/hash - Fix hmac issue more than 256 bytesLionel Debieve1-1/+1
Correct condition for the second hmac loop. Key must be only set in the first loop. Initial condition was wrong, HMAC_KEY flag was not properly checked. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-03crypto: stm32/crc32 - rename driver fileLionel Debieve2-1/+1
Use the same naming convention for all stm32 crypto drivers. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner1-15/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194Thomas Gleixner2-2/+2
Based on 1 normalized pattern(s): license terms gnu general public license gpl version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 161 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.447718015@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03crypto: stm32/cryp - update to return iv_outLionel Debieve1-0/+20
The kernel crypto API request output the next IV data to IV buffer for CBC implementation. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-03crypto: stm32/cryp - remove request mutex protectionLionel Debieve1-19/+7
Mutex is badly used between threaded irq and driver. This mutex must be removed as the framework must ensure that requests must be serialized to avoid issue. Rework req to avoid crash during finalize by fixing the NULL pointer issue. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-20 15:28:17 +0000