summaryrefslogtreecommitdiffstats
path: root/drivers/clk/bcm/clk-bcm2835.c
AgeCommit message (Collapse)AuthorFilesLines
2022-09-30clk: bcm2835: fix bcm2835_clock_rate_from_divisor declarationStefan Wahren1-3/+3
The return value of bcm2835_clock_rate_from_divisor is always unsigned and also all caller expect this. So fix the declaration accordingly. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220904141037.38816-1-stefan.wahren@i2se.com Reviewed-by: Ivan T. Ivanov <iivanov@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: bcm2835: Round UART input clock upIvan T. Ivanov1-2/+33
It was reported that RPi3[1] and RPi Zero 2W boards have issues with the Bluetooth. It turns out that when switching from initial to operation speed host and device no longer can talk each other because host uses incorrect UART baud rate. The UART driver used in this case is amba-pl011. Original fix, see below Github link[2], was inside pl011 module, but somehow it didn't look as the right place to fix. Beside that this original rounding function is not exactly perfect for all possible clock values. So I deiced to move the hack to the platform which actually need it. The UART clock is initialised to be as close to the requested frequency as possible without exceeding it. Now that there is a clock manager that returns the actual frequencies, an expected 48MHz clock is reported as 47999625. If the requested baud rate == requested clock/16, there is no headroom and the slight reduction in actual clock rate results in failure. If increasing a clock by less than 0.1% changes it from ..999.. to ..000.., round it up. [1] https://bugzilla.suse.com/show_bug.cgi?id=1188238 [2] https://github.com/raspberrypi/linux/commit/ab3f1b39537f6d3825b8873006fbe2fc5ff057b7 Cc: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220912081306.24662-1-iivanov@suse.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: bcm2835: Make peripheral PLLC criticalMaxime Ripard1-1/+1
When testing for a series affecting the VEC, it was discovered that turning off and on the VEC clock is crashing the system. It turns out that, when disabling the VEC clock, it's the only child of the PLLC-per clock which will also get disabled. The source of the crash is PLLC-per being disabled. It's likely that some other device might not take a clock reference that it actually needs, but it's unclear which at this point. Let's make PLLC-per critical so that we don't have that crash. Reported-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220926084509.12233-1-maxime@cerno.tech Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-17clk: bcm2835: fix bcm2835_clock_choose_divStefan Wahren1-0/+1
The commit 09e3b18ca5de ("clk: bcm2835: Remove unused variable") accidentially breaks the behavior of bcm2835_clock_choose_div() and booting of Raspberry Pi. The removed do_div macro call had side effects, so we need to restore it. Fixes: 09e3b18ca5de ("clk: bcm2835: Remove unused variable") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220428183010.1635248-1-stefan.wahren@i2se.com Tested-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-11clk: bcm2835: Remove unused variableMaxime Ripard1-2/+0
Since commit 8ca011ef4af4 ("clk: bcm-2835: Remove rounding up the dividers"), the rem variable is still set but no longer used. Remove it. Fixes: 8ca011ef4af4 ("clk: bcm-2835: Remove rounding up the dividers") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220222140732.253819-1-maxime@cerno.tech Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-25clk: bcm-2835: Remove rounding up the dividersMaxime Ripard1-8/+3
The driver, once it found a divider, tries to round it up by increasing the least significant bit of the fractional part by one when the round_up argument is set and there's a remainder. However, since it increases the divider it will actually reduce the clock rate below what we were asking for, leading to issues with clk_set_min_rate() that will complain that our rounded clock rate is below the minimum of the rate. Since the dividers are fairly precise already, let's remove that part so that we can have clk_set_min_rate() working. This is effectively a revert of 9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor"). Fixes: 9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality Tested-by: Michael Stapelberg <michael@stapelberg.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-3-maxime@cerno.tech
2021-10-25clk: bcm-2835: Pick the closest clock rateMaxime Ripard1-1/+1
The driver currently tries to pick the closest rate that is lower than the rate being requested. This causes an issue with clk_set_min_rate() since it actively checks for the rounded rate to be above the minimum that was just set. Let's change the logic a bit to pick the closest rate to the requested rate, no matter if it's actually higher or lower. Fixes: 6d18b8adbe67 ("clk: bcm2835: Support for clock parent selection") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality Tested-by: Michael Stapelberg <michael@stapelberg.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-2-maxime@cerno.tech
2021-08-05clk: bcm2835: Switch to clk_divider.determine_rateMartin Blumenstingl1-5/+4
.determine_rate is meant to replace .round_rate in CCF in the future. Switch over to .determine_rate now that clk_divider_ops has gained support for that. Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-rpi-kernel@lists.infradead.org Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210702225145.2643303-4-martin.blumenstingl@googlemail.com Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: bcm2835: add missing release if devm_clk_hw_register failsNavid Emamdoost1-1/+3
In the implementation of bcm2835_register_pll(), the allocated pll is leaked if devm_clk_hw_register() fails to register hw. Release pll if devm_clk_hw_register() fails. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Link: https://lore.kernel.org/r/20200809231202.15811-1-navid.emamdoost@gmail.com Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-08-03clk: bcm2835: Do not use prediv with bcm2711's PLLsNicolas Saenz Julienne1-4/+21
Contrary to previous SoCs, bcm2711 doesn't have a prescaler in the PLL feedback loop. Bypass it by zeroing fb_prediv_mask when running on bcm2711. Note that, since the prediv configuration bits were re-purposed, this was triggering miscalculations on all clocks hanging from the VPU clock, notably the aux UART, making its output unintelligible. Fixes: 42de9ad400af ("clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20200730182619.23246-1-nsaenzjulienne@suse.de Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm2835: Don't cache the PLLB rateMaxime Ripard1-2/+3
The PLLB rate will be changed through the firmware clocks drivers and will change behind this drivers' back, so we don't want to cache the rate. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/9864daba2f584ed49aee5ed1d2f4d48507c58197.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm2835: Allow custom CCF flags for the PLLsMaxime Ripard1-1/+2
While some clock types allow for each clock to specify its own custom flags, the PLLs can't. We will need this for the PLLB, so let's add it. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/ae8bd505d8851f6646e244cd76b6b289346973c8.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19Revert "clk: bcm2835: remove pllb"Maxime Ripard1-4/+26
This reverts commit 2256d89333bd17b8b56b42734a7e1046d52f7fc3. Since we will be expanding the firmware clock driver, we'll need to remove the quirks to deal with the PLLB. However, we still want to expose the clock tree properly, so having that clock in the MMIO driver will allow that. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/5d26a4c58248f5be7760a7f2f720a1310baea5dd.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-27clk: bcm2835: Constify struct debugfs_reg32Rikard Falkeborn1-3/+3
bcm2835_debugfs_clock_reg32 is never changed and can therefore be made const. This allows the compiler to put it in the text section instead of the data section. Before: text data bss dec hex filename 26598 16088 64 42750 a6fe drivers/clk/bcm/clk-bcm2835.o After: text data bss dec hex filename 26662 16024 64 42750 a6fe drivers/clk/bcm/clk-bcm2835.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lkml.kernel.org/r/20200508220238.4883-1-rikard.falkeborn@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: bcm2835: Remove casting to bcm2835_clk_registerNathan Chancellor1-31/+37
There are four different callback functions that are used for the clk_register callback that all have different second parameter types. bcm2835_register_pll -> struct bcm2835_pll_data bcm2835_register_pll_divider -> struct bcm2835_pll_divider_data bcm2835_register_clock -> struct bcm2835_clock_data bcm2835_register_date -> struct bcm2835_gate_data These callbacks are cast to bcm2835_clk_register so that there is no error about incompatible pointer types. Unfortunately, this is a control flow integrity violation, which verifies that the callback function's types match the prototypes exactly before jumping. [ 0.857913] CFI failure (target: 0xffffff9334a81820): [ 0.857977] WARNING: CPU: 3 PID: 35 at kernel/cfi.c:29 __cfi_check_fail+0x50/0x58 [ 0.857985] Modules linked in: [ 0.858007] CPU: 3 PID: 35 Comm: kworker/3:1 Not tainted 4.19.123-v8-01301-gdbb48f16956e4-dirty #1 [ 0.858015] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 0.858031] Workqueue: events 0xffffff9334a925c8 [ 0.858046] pstate: 60000005 (nZCv daif -PAN -UAO) [ 0.858058] pc : __cfi_check_fail+0x50/0x58 [ 0.858070] lr : __cfi_check_fail+0x50/0x58 [ 0.858078] sp : ffffff800814ba90 [ 0.858086] x29: ffffff800814ba90 x28: 000fffffffdfff3d [ 0.858101] x27: 00000000002000c2 x26: ffffff93355fdb18 [ 0.858116] x25: 0000000000000000 x24: ffffff9334a81820 [ 0.858131] x23: ffffff93357f3580 x22: ffffff9334af1000 [ 0.858146] x21: a79b57e88f8ebc81 x20: ffffff93357f3580 [ 0.858161] x19: ffffff9334a81820 x18: fffffff679769070 [ 0.858175] x17: 0000000000000000 x16: 0000000000000000 [ 0.858190] x15: 0000000000000004 x14: 000000000000003c [ 0.858205] x13: 0000000000003044 x12: 0000000000000000 [ 0.858220] x11: b57e91cd641bae00 x10: b57e91cd641bae00 [ 0.858235] x9 : b57e91cd641bae00 x8 : b57e91cd641bae00 [ 0.858250] x7 : 0000000000000000 x6 : ffffff933591d4e5 [ 0.858264] x5 : 0000000000000000 x4 : 0000000000000000 [ 0.858279] x3 : ffffff800814b718 x2 : ffffff9334a84818 [ 0.858293] x1 : ffffff9334bba66c x0 : 0000000000000029 [ 0.858308] Call trace: [ 0.858321] __cfi_check_fail+0x50/0x58 [ 0.858337] __cfi_check+0x3ab3c/0x4467c [ 0.858351] bcm2835_clk_probe+0x210/0x2dc [ 0.858369] platform_drv_probe+0xb0/0xfc [ 0.858380] really_probe+0x4a0/0x5a8 [ 0.858391] driver_probe_device+0x68/0x104 [ 0.858403] __device_attach_driver+0x100/0x148 [ 0.858418] bus_for_each_drv+0xb0/0x12c [ 0.858431] __device_attach.llvm.17225159516306086099+0xc0/0x168 [ 0.858443] bus_probe_device+0x44/0xfc [ 0.858455] deferred_probe_work_func+0xa0/0xe0 [ 0.858472] process_one_work+0x210/0x538 [ 0.858485] worker_thread+0x2e8/0x478 [ 0.858500] kthread+0x154/0x164 [ 0.858515] ret_from_fork+0x10/0x18 To fix this, change the second parameter of all functions void * and use a local variable with the correct type so that everything works properly. With this, the only use of bcm2835_clk_register is in struct bcm2835_clk_desc so we can just remove it and use the type directly. Fixes: 56eb3a2ed972 ("clk: bcm2835: remove use of BCM2835_CLOCK_COUNT in driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1028 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lkml.kernel.org/r/20200516080806.1459784-2-natechancellor@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: bcm2835: Fix return type of bcm2835_register_gateNathan Chancellor1-5/+5
bcm2835_register_gate is used as a callback for the clk_register member of bcm2835_clk_desc, which expects a struct clk_hw * return type but bcm2835_register_gate returns a struct clk *. This discrepancy is hidden by the fact that bcm2835_register_gate is cast to the typedef bcm2835_clk_register by the _REGISTER macro. This turns out to be a control flow integrity violation, which is how this was noticed. Change the return type of bcm2835_register_gate to be struct clk_hw * and use clk_hw_register_gate to do so. This should be a non-functional change as clk_register_gate calls clk_hw_register_gate anyways but this is needed to avoid issues with further changes. Fixes: b19f009d4510 ("clk: bcm2835: Migrate to clk_hw based registration and OF APIs") Link: https://github.com/ClangBuiltLinux/linux/issues/1028 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lkml.kernel.org/r/20200516080806.1459784-1-natechancellor@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-10-16clk: bcm2835: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lkml.kernel.org/r/20191014143642.24552-1-yuehaibing@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: bcm2835: Mark PLLD_PER as CRITICALStefan Wahren1-1/+6
The VPU firmware assume that the PLLD_PER isn't modified by the ARM core. Otherwise this could cause firmware lookups. So mark the clock as critical to avoid this. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2019-09-17clk: bcm2835: Add BCM2711_CLOCK_EMMC2 supportStefan Wahren1-1/+19
The new BCM2711 supports an additional clock for the emmc2 block. So add a new compatible and register this clock only for BCM2711. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2019-09-17clk: bcm2835: Introduce SoC specific clock registrationStefan Wahren1-17/+96
In order to support SoC specific clocks (e.g. emmc2 for BCM2711), we extend the description with a SoC support flag. This approach avoids long and mostly redundant lists of clock IDs. Since PLLH is specific to BCM2835, we register only rest of the clocks as common to all SoC. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2019-06-25clk: bcm2835: remove pllbNicolas Saenz Julienne1-24/+4
Raspberry Pi's firmware controls this pll, we should use the firmware interface to access it. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd1-0/+1
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-14Merge branches 'clk-managed-registration', 'clk-spdx', 'clk-remove-basic' ↵Stephen Boyd1-11/+1
and 'clk-ops-const' into clk-next - Make devm_of_clk_add_hw_provider() use parent dt node if necessary - Various SPDX taggings - Mark clk_ops const when possible * clk-managed-registration: clk: bd718x7: Initial support for ROHM bd71837/bd71847 PMIC clock clk: apcs-msm8916: simplify probe cleanup by using devm clk: clk-twl6040: Free of_provider at remove clk: rk808: use managed version of of_provider registration clk: clk-hi655x: Free of_provider at remove clk: of-provider: look at parent if registered device has no provider info clk: Add kerneldoc to managed of-provider interfaces * clk-spdx: clk: Tag basic clk types with SPDX clk: Tag clk core files with SPDX clk: bcm2835: Switch to SPDX identifier * clk-remove-basic: clk: Loongson1: Remove usage of CLK_IS_BASIC clk: samsung: s3c2410: Remove usage of CLK_IS_BASIC clk: versatile: sp810: Remove usage of CLK_IS_BASIC clk: hisilicon: Remove usage of CLK_IS_BASIC clk: h8300: Remove usage of CLK_IS_BASIC clk: axm5516: Remove usage of CLK_IS_BASIC clk: st: Remove usage of CLK_IS_BASIC clk: renesas: Remove usage of CLK_IS_BASIC * clk-ops-const: clk: s2mps11: constify clk_ops structure clk: pxa: constify clk_ops structures clk: pistachio: constify clk_ops structures clk: palmas: constify clk_ops structure clk: max77686: constify clk_ops structure
2018-11-14clk: bcm2835: Switch to SPDX identifierStefan Wahren1-11/+1
Adopt the SPDX license identifier headers to ease license compliance management. Cc: Simon Arlott <simon@arlott.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-06clk: bcm2835: make license text and module license matchStefan Wahren1-1/+1
The license text is specifying GPL v2 or later but the MODULE_LICENSE is set to GPL v2 which means GNU Public License v2 only. So choose the license text as the correct one. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-2/+2
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-09Merge tag 'clk-for-linus' of ↵Linus Torvalds1-24/+18
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time we have a good set of changes to the core framework that do some general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) clk: qcom: Export clk_fabia_pll_configure() clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc clk-si544: Properly round requested frequency to nearest match clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted clk: use match_string() helper clk: bcm2835: use match_string() helper clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions clk: imx6: add EPIT clock support clk: mvebu: use correct bit for 98DX3236 NAND ...
2018-06-06treewide: Use struct_size() for devm_kmalloc() and friendsKees Cook1-2/+2
Replaces open-coded struct size calculations with struct_size() for devm_*, f2fs_*, and sock_* allocations. Automatically generated (and manually adjusted) from the following Coccinelle script: // Direct reference to struct field. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(HANDLE, sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(HANDLE, CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-04Merge branches 'clk-match-string', 'clk-ingenic', 'clk-si544-round-fix' and ↵Stephen Boyd1-7/+6
'clk-bcm-stingray' into clk-next * clk-match-string: clk: use match_string() helper clk: bcm2835: use match_string() helper * clk-ingenic: clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted * clk-si544-round-fix: clk-si544: Properly round requested frequency to nearest match * clk-bcm-stingray: clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc
2018-06-01clk: bcm2835: use match_string() helperYisheng Xie1-7/+6
match_string() returns the index of an array for a matching string, which can be used instead of open coded variant. Reviewed-by: Eric Anholt <eric@anholt.net> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: linux-clk@vger.kernel.org Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-01clk: Return void from debug_init opStephen Boyd1-14/+11
We only have two users of the debug_init hook, and we recently stopped caring about the return value from that op. Finish that off by changing the clk_op to return void instead of int because it doesn't matter if debugfs fails or not. Cc: Eric Anholt <eric@anholt.net> Cc: David Lechner <david@lechnology.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-01clk: bcm2835: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-4/+2
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Michael Turquette <mturquette@baylibre.com> Reviewed-by: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Phil Elwell <phil@raspberrypi.org> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Danilo Krummrich <danilokrummrich@dk-develop.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-13Merge tag 'clk-for-linus' of ↵Linus Torvalds1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The large diff this time around is from the addition of a new clk driver for the TI Davinci family of SoCs. So far those clks have been supported with a custom implementation of the clk API in the arch port instead of in the CCF. With this driver merged we're one step closer to having a single clk API implementation. The other large diff is from the Amlogic clk driver that underwent some major surgery to use regmap. Beyond that, the biggest hitter is Samsung which needed some reworks to properly handle clk provider power domains and a bunch of PLL rate updates. The core framework was fairly quiet this round, just getting some cleanups and small fixes for some of the more esoteric features. And the usual set of driver non-critical fixes, cleanups, and minor additions are here as well. Core: - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops - debugfs ops macroized to shave some lines of boilerplate code - Always calculate the phase instead of caching it in clk_get_phase() - More __must_check on bulk clk APIs New Drivers: - TI's Davinci family of SoCs - Intel's Stratix10 SoC - stm32mp157 SoC - Allwinner H6 CCU - Silicon Labs SI544 clock generator chip - Renesas R-Car M3-N and V3H SoCs - i.MX6SLL SoCs Removed Drivers: - ST-Ericsson AB8540/9540 Updates: - Mediatek MT2701 and MT7622 audsys support and MT2712 updates - STM32F469 DSI and STM32F769 sdmmc2 support - GPIO clks can sleep now - Spreadtrum SC9860 RTC clks - Nvidia Tegra MBIST workarounds and various minor fixes - Rockchip phase handling fixes and a memory leak plugged - Renesas drivers switch to readl/writel from clk_readl/clk_writel - Renesas gained CPU (Z/Z2) and watchdog support - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support - Qualcomm PM8921 PMIC XO buffers - Amlogic migrates to regmap APIs - TI Keystone clk latching support - Allwinner H3 and H5 video clk fixes - Broadcom BCM2835 PLLs needed another bit to enable - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix - i.MX6UL/ULL epdc_podf support - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits) clk: davinci: add a reset lookup table for psc0 clk: imx: add clock driver for imx6sll dt-bindings: imx: update clock doc for imx6sll clk: imx: add new gate/gate2 wrapper funtion clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux clk: cs2000: set pm_ops in hibernate-compatible way clk: bcm2835: De-assert/assert PLL reset signal when appropriate clk: imx7d: Move clks_init_on before any clock operations clk: imx7d: Correct ahb clk parent select clk: imx7d: Correct dram pll type clk: imx7d: Add USB clock information clk: socfpga: stratix10: add clock driver for Stratix10 platform dt-bindings: documentation: add clock bindings information for Stratix10 clk: ti: fix flag space conflict with clkctrl clocks clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add SATA clock control support clk: uniphier: add PCIe clock control support clk: Add driver for the si544 clock generator chip clk: davinci: Remove redundant dev_err calls clk: uniphier: add ethernet clock control support for PXs3 ...
2018-04-06clk: bcm2835: De-assert/assert PLL reset signal when appropriateBoris Brezillon1-3/+5
In order to enable a PLL, not only the PLL has to be powered up and locked, but you also have to de-assert the reset signal. The last part was missing. Add it so PLLs that were not enabled by the FW/bootloader can be enabled from Linux. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19clk: bcm2835: Protect sections updating shared registersBoris Brezillon1-0/+4
CM_PLLx and A2W_XOSC_CTRL registers are accessed by different clock handlers and must be accessed with ->regs_lock held. Update the sections where this protection is missing. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19clk: bcm2835: Fix ana->maskX definitionsBoris Brezillon1-4/+4
ana->maskX values are already '~'-ed in bcm2835_pll_set_rate(). Remove the '~' in the definition to fix ANA setup. Note that this commit fixes a long standing bug preventing one from using an HDMI display if it's plugged after the FW has booted Linux. This is because PLLH is used by the HDMI encoder to generate the pixel clock. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2017-09-25clk: bcm2835: remove remains from stub clk driverDanilo Krummrich1-30/+0
This commit removes the fixed clocks introduced as a stub clock driver added with commit 75fabc3f6448 ("ARM: bcm2835: add stub clock driver"). Originally they were used to drive the AMBA bus and PL011 uart driver. Now these clocks are derived by the CPRMAN clock driver and configured in DT. Additionally, get rid of init_machine function in bcm2835 board file as there's nothing to do any longer. Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de> Acked-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
2017-06-02clk: bcm2835: Minimise clock jitter for PCM clockPhil Elwell1-5/+29
Fractional clock dividers generate accurate average frequencies but with jitter, particularly when the integer divisor is small. Introduce a new metric of clock accuracy to penalise clocks with a good average but worse jitter compared to clocks with an average which is no better but with lower jitter. The metric is the ideal rate minus the worse deviation from that ideal using the nearest integer divisors. Use this metric for parent selection for clocks requiring low jitter (currently just PCM). Signed-off-by: Phil Elwell <phil@raspberrypi.org> Reviewed-by: Eric Anholt <eric@anholt.net> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-02clk: bcm2835: Limit PCM clock to OSC and PLLD_PERPhil Elwell1-1/+26
Restrict clock sources for the PCM peripheral to the oscillator and PLLD_PER because other source may have varying rates or be switched off. Prevent other sources from being selected by replacing their names in the list of potential parents with dummy entries (entry index is significant). Signed-off-by: Phil Elwell <phil@raspberrypi.org> Reviewed-by: Eric Anholt <eric@anholt.net> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-02clk: bcm2835: Correct the prediv logicPhil Elwell1-1/+3
If a clock has the prediv flag set, both the integer and fractional parts must be scaled when calculating the resulting frequency. Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-20clk: bcm2835: Add leaf clock measurement support, disabled by defaultEric Anholt1-25/+119
This proved incredibly useful during debugging of the DSI driver, to see if our clocks were running at rate we requested. Let's leave it here for the next person interacting with clocks on the platform (and so that hopefully we can just hook it up to debugfs some day). Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-20clk: bcm2835: Register the DSI0/DSI1 pixel clocks.Eric Anholt1-12/+109
The DSI pixel clocks are muxed from clocks generated in the analog phy by the DSI driver. In order to set them as parents, we need to do the same name lookup dance on them as we do for our root oscillator. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-20clk: bcm2835: Don't rate change PLLs on behalf of DSI PLL dividers.Eric Anholt1-14/+28
Our core PLLs are intended to be configured once and left alone. With the SET_RATE_PARENT, asking to set the PLLD_DSI1 clock rate would change PLLD just to get closer to the requested DSI clock, thus changing PLLD_PER, the UART and ethernet PHY clock rates downstream of it, and breaking ethernet. We *do* want PLLH to change so that PLLH_AUX can be exactly the value we want, though. Thus, we need to have a per-divider policy of whether to pass rate changes up. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-12clk: bcm: Fix 'maybe-uninitialized' warning in ↵Boris Brezillon1-1/+1
bcm2835_clock_choose_div_and_prate() best_rate is reported as potentially uninitialized by gcc. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: 155e8b3b0ee3 ("clk: bcm: Support rate change propagation on bcm2835 clocks") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clockBoris Brezillon1-1/+6
The VEC clock requires needs to be set at exactly 108MHz. Allow rate change propagation on PLLH_AUX to match this requirement wihtout impacting other IPs (PLLH is currently only used by the HDMI encoder, which cannot be enabled when the VEC encoder is enabled). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08clk: bcm: Support rate change propagation on bcm2835 clocksBoris Brezillon1-4/+63
Some peripheral clocks, like the VEC (Video EnCoder) clock need to be set to a precise rate (in our case 108MHz). With the current implementation, where peripheral clocks are not allowed to forward rate change requests to their parents, it is impossible to match this requirement unless the bootloader has configured things correctly, or a specific rate has been assigned through the DT (with the assigned-clk-rates property). Add a new field to struct bcm2835_clock_data to specify which parent clocks accept rate change propagation, and support set rate propagation in bcm2835_clock_determine_rate(). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08clk: bcm2835: Avoid overwriting the div info when disabling a pll_div clkBoris Brezillon1-1/+3
bcm2835_pll_divider_off() is resetting the divider field in the A2W reg to zero when disabling the clock. Make sure we preserve this value by reading the previous a2w_reg value first and ORing the result with A2W_PLL_CHANNEL_DISABLE. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable@vger.kernel.org> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-23clk: bcm2835: Fix ->fixed_divider of pllh_auxBoris Brezillon1-1/+1
There is no fixed divider on pllh_aux. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: bcm2835: Clamp the PLL's requested rate to the hardware limits.Eric Anholt1-7/+4
Fixes setting low-resolution video modes on HDMI. Now the PLLH_PIX divider adjusts itself until the PLLH is within bounds. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14clk: bcm2835: Migrate to clk_hw based registration and OF APIsStephen Boyd1-39/+46
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Eric Anholt <eric@anholt.net> Cc: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-30 19:08:02 +0000