summaryrefslogtreecommitdiffstats
path: root/drivers/char/agp/intel-agp.h
AgeCommit message (Collapse)AuthorFilesLines
2014-01-07agp/intel: Use pci_bus_address() to get GTTADR bus addressBjorn Helgaas1-1/+1
Per the Intel 915G/915GV/... Chipset spec (document number 301467-005), GTTADR is a standard PCI BAR. The PCI core reads GTTADR at enumeration-time. Use pci_bus_address() instead of reading it again in the driver. This works correctly for both 32-bit and 64-bit BARs. The spec above only mentions 32-bit GTTADR, but we should still use the standard interface. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07agp/intel: Use pci_bus_address() to get MMADR bus addressBjorn Helgaas1-2/+2
Per the Intel 915G/915GV/... Chipset spec (document number 301467-005), MMADR is a standard PCI BAR. The PCI core reads MMADR at enumeration-time. Use pci_bus_address() instead of reading it again in the driver. This works correctly for both 32-bit and 64-bit BARs. The spec above only mentions 32-bit MMADR, but we should still use the standard interface. Also, stop clearing the low 19 bits of the bus address because it's invalid to use addresses outside the region defined by the BAR. The spec claims MMADR is 512KB; if that's the case, those bits will be zero anyway. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07agp/intel: Support 64-bit GMADRYinghai Lu1-2/+2
Per the Intel 915G/915GV/... Chipset spec (document number 301467-005), GMADR is a standard PCI BAR. The PCI core reads GMADR at enumeration-time. Use pci_bus_address() instead of reading it again in the driver. This works correctly for both 32-bit and 64-bit BARs. The spec above only mentions 32-bit GMADR, but Yinghai's patch (link below) indicates some devices have a 64-bit GMADR. [bhelgaas: reworked starting from http://lkml.kernel.org/r/1385851238-21085-13-git-send-email-yinghai@kernel.org] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-11drm/i915: Kill off now unused gen6+ AGP codeBen Widawsky1-91/+0
v2: Accidently removed an ILK case in i9xx_setup (Nicely found by Chris) CC: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by [v1] : Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17drm/i915: fix hsw uncached pteDaniel Vetter1-0/+1
They've changed it ... for no apparent reason. Meh. V2: remove unused 'is_hsw' field. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-07drm/i915: add more Haswell PCI IDsPaulo Zanoni1-5/+34
Also properly indent the HB IDs. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-25Merge tag 'v3.5-rc4' into drm-intel-next-queuedDaniel Vetter1-0/+1
I want to merge the "no more fake agp on gen6+" patches into drm-intel-next (well, the last pieces). But a patch in 3.5-rc4 also adds a new use of dev->agp. Hence the backmarge to sort this out, for otherwise drm-intel-next merged into Linus' tree would conflict in the relevant code, things would compile but nicely OOPS at driver load :( Conflicts in this merge are just simple cases of "both branches changed/added lines at the same place". The only tricky part is to keep the order correct wrt the unwind code in case of errors in intel_ringbuffer.c (and the MI_DISPLAY_FLIP #defines in i915_reg.h together, obviously). Conflicts: drivers/gpu/drm/i915/i915_reg.h drivers/gpu/drm/i915/intel_ringbuffer.c Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-12drm/i915 + agp/intel-gtt: prep work for direct setupDaniel Vetter1-3/+0
To be able to directly set up the intel-gtt code from drm/i915 and avoid setting up the fake-agp driver we need to prepare a few things: - pass both the bridge and gpu pci_dev to the probe function and add code to handle the gpu pdev both being present (for drm/i915) and not present (fake agp). - add refcounting to the remove function so that unloading drm/i915 doesn't kill the fake agp driver v2: Fix up the cleanup and refcount, noticed by Jani Nikula. Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-06char/agp: add another Ironlake host bridgeEugeni Dodonov1-0/+1
This seems to come on Gigabyte H55M-S2V and was discovered through the https://bugs.freedesktop.org/show_bug.cgi?id=50381 debugging. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50381 Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-12Merge branch 'drm-intel-next' of ↵Dave Airlie1-0/+14
git://people.freedesktop.org/~danvet/drm-intel into drm-core-next Daniel Vetter wrote First pull request for 3.5-next, slightly large than usual because new things kept coming in since the last pull for 3.4. Highlights: - first batch of hw enablement for vlv (Jesse et al) and hsw (Eugeni). pci ids are not yet added, and there's still quite a few patches to merge (mostly modesetting). To make QA easier I've decided to merge this stuff in pieces. - loads of cleanups and prep patches spurred by the above. Especially vlv is a real frankenstein chip, but also hsw is stretching our driver's code design. Expect more to come in this area for 3.5. - more gmbus fixes, cleanups and improvements by Daniel Kurtz. Again, there are more patches needed (and some already queued up), but I wanted to split this a bit for better testing. - pwrite/pread rework and retuning. This series has been in the works for a few months already and a lot of i-g-t tests have been created for it. Now it's finally ready to be merged. Note that one patch in this series touches include/pagemap.h, that patch is acked-by akpm. - reduce mappable pressure and relocation throughput improvements from Chris. - mmap offset exhaustion mitigation by Chris Wilson. - a start at figuring out which codepaths in our messy dri1/ums+gem/kms driver we actually need to support by bailing out of unsupported case. The driver now refuses to load without kms on gen6+ and disallows a few ioctls that userspace never used in certain cases. More of this will definitely come. - More decoupling of global gtt and ppgtt. - Improved dual-link lvds detection by Takashi Iwai. - Shut up the compiler + plus fix the fallout (Ben) - Inverted panel brightness handling (mostly Acer manages to break things in this way). - Small fixlets and adjustements and some minor things to help debugging. Regression-wise QA reported quite a few issues on ivb, but all of them turned out to be hw stability issues which are already fixed in drm-intel-fixes (QA runs the nightly regression tests on -next alone, without -fixes automatically merged in). There's still one issue open on snb, it looks like occlusion query writes are not quite as cache coherent as we've expected. With some of the pwrite adjustements we can now reliably hit this. Kernel workaround for it is in the works." * 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel: (101 commits) drm/i915: VCS is not the last ring drm/i915: Add a dual link lvds quirk for MacBook Pro 8,2 drm/i915: make quirks more verbose drm/i915: dump the DMA fetch addr register on pre-gen6 drm/i915/sdvo: Include YRPB as an additional TV output type drm/i915: disallow gem init ioctl on ilk drm/i915: refuse to load on gen6+ without kms drm/i915: extract gt interrupt handler drm/i915: use render gen to switch ring irq functions drm/i915: rip out old HWSTAM missed irq WA for vlv drm/i915: open code gen6+ ring irqs drm/i915: ring irq cleanups drm/i915: add SFUSE_STRAP registers for digital port detection drm/i915: add WM_LINETIME registers drm/i915: add WRPLL clocks drm/i915: add LCPLL control registers drm/i915: add SSC offsets for SBI access drm/i915: add port clock selection support for HSW drm/i915: add S PLL control drm/i915: add PIXCLK_GATE register ... Conflicts: drivers/char/agp/intel-agp.h drivers/char/agp/intel-gtt.c drivers/gpu/drm/i915/i915_debugfs.c
2012-04-09drm/i915: add Haswell devices and their PCI IDsEugeni Dodonov1-0/+11
This adds product definitions for desktop, mobile and server boards. v2: split into a separate patch, add .has_pch_split feature. Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-02drm/i915: add Ivy Bridge GT2 Server entriesEugeni Dodonov1-0/+1
This adds PCI ID for IVB GT2 server variant which we were missing. Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> [danvet: fix up conflict because the patch has been diffed against next. tsk.] Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-03-29agp/intel: add ValleyView AGP driverJesse Barnes1-0/+3
... and bind it right to the PCI id. Note that there are still a few things to fix here: - we need to move the tlb flush to a better place in drm/i915. - we need to check snoop support on vlv and implement it. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: squash follow-on patch and add todo items to commit msg.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-07-13agp/intel: Fix typo in G4x_GMCH_SIZE_VT_2MChris Wilson1-3/+4
Konstantin Belousov found an error in the define of G4x_GMCH_SIZE_VT_2M relative to the GMCH specs, and confirmed that indeed one of his users with a Q45 reports 0xb not 0xc for a 2/2MiB GATT. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Konstantin Belousov <kostikbel@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-13agp/intel: add Ivy Bridge supportJesse Barnes1-0/+8
Just use the Sandy Bridge routines. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-02-22agp/intel: Experiment with a 855GM GWB bitChris Wilson1-0/+1
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=27187 Tested-by: Thorsten Vollmer <thorsten@thvo.de> (DFI-ACP G5M150-N w/852GME) Tested-by: Moritz Brunner <2points@gmx.org> (Asus M2400N/i855GM) Tested-by: Indan Zupancic <indan@nul.nu> (Thinkpad X40/855GM rev 02) Tested-by: Eric Anholt <eric@anholt.net> (865G) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-11agp/intel: Flush the chipset write buffers when changing GTT baseChris Wilson1-0/+2
Flush the chipset write buffers before and after adjusting the GTT base register, just in case. We only modify this value upon initialisation (boot and resume) so there should be no outstanding writes, however there are always those persistent PGTBL_ER that keep getting reported upon resume. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-10-27intel-gtt: maximize ggtt size on platforms that support thisDaniel Vetter1-3/+11
On VT-d supporting platforms the GGTT is allocated in a stolen mem section separate from graphcis stolen mem. The GMCH register contains a bitfield specifying the size of that region. Docs suggest that this region can only be used for GGTT and PPGTT. Hence ensure that the PPGTT is disabled and use the complete area for the GGTT. Unfortunately the graphics core on G33/Pineview can't cope with really large GTTs and the BIOS usually enables the maximum of 512MB. So don't bother with maximizing the GTT on these platforms. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21Merge branch 'drm-intel-fixes' into HEADChris Wilson1-0/+2
Conflicts: drivers/char/agp/intel-agp.c drivers/gpu/drm/i915/intel_crt.c
2010-09-17drm/i915,agp/intel: Add second set of PCI-IDs for B43Chris Wilson1-0/+2
There is a second revision of B43 (a desktop gen4 part) floating around, functionally equivalent to the original B43, so simply add the new PCI-IDs. Bugzilla: https://bugs.freedesktop.org/show_bugs.cgi?id=30221 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-08intel-gtt: introduce intel_gtt_driverDaniel Vetter1-40/+0
Same idea as INTEL_INFO from drm/i915. This - reduces the dependancy on agp_driver - stops the what-does-IS_I965G-mean confusion (here it's just gen4, in drm/i915 it's gen >=4) - further prepares the separation of the fake agp driver from the rest. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08agp/intel: make intel-gtt.c into a real source fileDaniel Vetter1-0/+3
Now that the disentangling is complete, stop including intel-gtt.c from intel-agp.c. The linux build system _really_ doesn't allow .c source files with the same name as the module. It fails with the following message when trying to build such a bugger: make[3]: Circular drivers/char/agp/intel-agp.o <- drivers/char/agp/intel-agp.o dependency dropped. Instead of renameing intel-agp.c I've simply created a new module out of intel-gtt.c. Renaming intel-agp.ko to something else is not an option for it will surely kill someones boot process. This also paves the way to use the gtt code without loading the agp driver. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07intel_agp,i915: Add more sandybridge graphics device idsZhenyu Wang1-6/+12
New pci ids for GT2 and GT2+ on desktop and mobile sandybridge, and graphics device ids for server sandybridge. Also rename original ids string to reflect GT1 version. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07agp/intel: use #ifdef idiom for intel-agp.hZhenyu Wang1-0/+4
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-08-21drm/i915,intel_agp: Add support for Sandybridge D0Zhenyu Wang1-0/+1
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-08-01agp/intel: Add actual definitions of the Sandybridge PTE caching bits.Zhenyu Wang1-0/+6
2010-04-18agp/intel: introduce intel-agp.h header fileDaniel Vetter1-0/+239
Intel definitions have spilled into agp.h. Create a header file for them and also include it in efficion-agp.c 'cause it needs a few of them. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 15:10:40 +0000