Age | Commit message (Collapse) | Author | Files | Lines |
|
Add new hvcall guest address host visibility support to mark
memory visible to host. Call it inside set_memory_decrypted
/encrypted(). Add HYPERVISOR feature check in the
hv_is_isolation_supported() to optimize in non-virtualization
environment.
Acked-by: Dave Hansen <dave.hansen@intel.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-4-ltykernel@gmail.com
[ wei: fix conflicts with tip ]
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
When Linux runs as the root partition on Microsoft Hypervisor, its
interrupts are remapped. Linux will need to explicitly map and unmap
interrupts for hardware.
Implement an MSI domain to issue the correct hypercalls. And initialize
this irq domain as the default MSI irq domain.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Co-Developed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210203150435.27941-16-wei.liu@kernel.org
|
|
They are used to deposit pages into Microsoft Hypervisor and bring up
logical and virtual processors.
Signed-off-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Co-Developed-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
Co-Developed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Co-Developed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210203150435.27941-10-wei.liu@kernel.org
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Implement the required wait and kick callbacks to support PV spinlocks in
Hyper-V guests.
[ tglx: Document the requirement for disabling interrupts in the wait()
callback. Remove goto and unnecessary includes. Add prototype
for hv_vcpu_is_preempted(). Adapted to pending paravirt changes. ]
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com>
Cc: chao.p.peng@intel.com
Cc: chao.gao@intel.com
Cc: isaku.yamahata@intel.com
Cc: tianyu.lan@microsoft.com
Link: https://lkml.kernel.org/r/1538987374-51217-3-git-send-email-yi.y.sun@linux.intel.com
|
|
Hyper-V supports a pv hypercall HvFlushGuestPhysicalAddressSpace to
flush nested VM address space mapping in l1 hypervisor and it's to
reduce overhead of flushing ept tlb among vcpus. This patch is to
implement it.
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The Hyper-V APIC code is built when CONFIG_HYPERV is enabled but the actual
code in that file is guarded with CONFIG_X86_64. There is no point in doing
this. Neither is there a point in having the CONFIG_HYPERV guard in there
because the containing directory is not built when CONFIG_HYPERV=n.
Further for the hv_init_apic() function a stub is provided only for
CONFIG_HYPERV=n, which is pointless as the callsite is not compiled at
all. But for X86_32 the stub is missing and the build fails.
Clean that up:
- Compile hv_apic.c only when CONFIG_X86_64=y
- Make the stub for hv_init_apic() available when CONFG_X86_64=n
Fixes: 6b48cb5f8347 ("X86/Hyper-V: Enlighten APIC access")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Michael Kelley <mikelley@microsoft.com>
|
|
Hyper-V supports MSR based APIC access; implement
the enlightenment.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: olaf@aepfle.de
Cc: sthemmin@microsoft.com
Cc: gregkh@linuxfoundation.org
Cc: jasowang@redhat.com
Cc: Michael.H.Kelley@microsoft.com
Cc: hpa@zytor.com
Cc: apw@canonical.com
Cc: devel@linuxdriverproject.org
Cc: vkuznets@redhat.com
Link: https://lkml.kernel.org/r/20180516215334.6547-1-kys@linuxonhyperv.com
|
|
Hyper-V host can suggest us to use hypercall for doing remote TLB flush,
this is supposed to work faster than IPIs.
Implementation details: to do HvFlushVirtualAddress{Space,List} hypercalls
we need to put the input somewhere in memory and we don't really want to
have memory allocation on each call so we pre-allocate per cpu memory areas
on boot.
pv_ops patching is happening very early so we need to separate
hyperv_setup_mmu_ops() and hyper_alloc_mmu().
It is possible and easy to implement local TLB flushing too and there is
even a hint for that. However, I don't see a room for optimization on the
host side as both hypercall and native tlb flush will result in vmexit. The
hint is also not set on modern Hyper-V versions.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Xiao <sixiao@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: devel@linuxdriverproject.org
Link: http://lkml.kernel.org/r/20170802160921.21791-8-vkuznets@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
As part of the effort to separate out architecture specific code, move the
hypercall page setup to an architecture specific file.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|