summaryrefslogtreecommitdiffstats
path: root/arch/mn10300
AgeCommit message (Collapse)AuthorFilesLines
2018-03-09mn10300: Remove the architectureDavid Howells274-33860/+0
Remove the MN10300 arch as the hardware is defunct. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com> cc: Masahiro Yamada <yamada.masahiro@socionext.com> cc: linux-am33-list@redhat.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-01Merge tag 'clk-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework has a handful of patches this time around, mostly due to the clk rate protection support added by Jerome Brunet. This feature will allow consumers to lock in a certain rate on the output of a clk so that things like audio playback don't hear pops when the clk frequency changes due to shared parent clks changing rates. Currently the clk API doesn't guarantee the rate of a clk stays at the rate you request after clk_set_rate() is called, so this new API will allow drivers to express that requirement. Beyond this, the core got some debugfs pretty printing patches and a couple minor non-critical fixes. Looking outside of the core framework diff we have some new driver additions and the removal of a legacy TI clk driver. Both of these hit high in the dirstat. Also, the removal of the asm-generic/clkdev.h file causes small one-liners in all the architecture Kbuild files. Overall, the driver diff seems to be the normal stuff that comes all the time to fix little problems here and there and to support new hardware. Summary: Core: - Clk rate protection - Symbolic clk flags in debugfs output - Clk registration enabled clks while doing bookkeeping updates New Drivers: - Spreadtrum SC9860 - HiSilicon hi3660 stub - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS - Amlogic Meson-AXG - ASPEED BMC Removed Drivers: - TI OMAP 3xxx legacy clk (non-DT) support - asm*/clkdev.h got removed (not really a driver) Updates: - Renesas FDP1-0 module clock on R-Car M3-W - Renesas LVDS module clock on R-Car V3M - Misc fixes to pr_err() prints - Qualcomm MSM8916 audio fixes - Qualcomm IPQ8074 rounded out support for more peripherals - Qualcomm Alpha PLL variants - Divider code was using container_of() on bad pointers - Allwinner DE2 clks on H3 - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED - Mediatek clk driver compile test support - AT91 PMC clk suspend/resume restoration support - PLL issues fixed on si5351 - Broadcom IProc PLL calculation updates - DVFS support for Armada mvebu CPU clks - Allwinner fixed post-divider support - TI clkctrl fixes and support for newer SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits) clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: fix reentrancy of clk_enable() on UP systems clk: meson-axg: fix potential NULL dereference in axg_clkc_probe() clk: Simplify debugfs registration clk: Fix debugfs_create_*() usage clk: Show symbolic clock flags in debugfs clk: renesas: r8a7796: Add FDP clock clk: Move __clk_{get,put}() into private clk.h API clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks clk: Improve flags doc for of_clk_detect_critical() arch: Remove clkdev.h asm-generic from Kbuild clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: Prepare to remove asm-generic/clkdev.h ...
2018-02-01Merge branch 'for-linus' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Add a console_msg_format command line option: The value "default" keeps the old "[time stamp] text\n" format. The value "syslog" allows to see the syslog-like "<log level>[timestamp] text" format. This feature was requested by people doing regression tests, for example, 0day robot. They want to have both filtered and full logs at hands. - Reduce the risk of softlockup: Pass the console owner in a busy loop. This is a new approach to the old problem. It was first proposed by Steven Rostedt on Kernel Summit 2017. It marks a context in which the console_lock owner calls console drivers and could not sleep. On the other side, printk() callers could detect this state and use a busy wait instead of a simple console_trylock(). Finally, the console_lock owner checks if there is a busy waiter at the end of the special context and eventually passes the console_lock to the waiter. The hand-off works surprisingly well and helps in many situations. Well, there is still a possibility of the softlockup, for example, when the flood of messages stops and the last owner still has too much to flush. There is increasing number of people having problems with printk-related softlockups. We might eventually need to get better solution. Anyway, this looks like a good start and promising direction. - Do not allow to schedule in console_unlock() called from printk(): This reverts an older controversial commit. The reschedule helped to avoid softlockups. But it also slowed down the console output. This patch is obsoleted by the new console waiter logic described above. In fact, the reschedule made the hand-off less effective. - Deprecate "%pf" and "%pF" format specifier: It was needed on ia64, ppc64 and parisc64 to dereference function descriptors and show the real function address. It is done transparently by "%ps" and "pS" format specifier now. Sergey Senozhatsky found that all the function descriptors were in a special elf section and could be easily detected. - Remove printk_symbol() API: It has been obsoleted by "%pS" format specifier, and this change helped to remove few continuous lines and a less intuitive old API. - Remove redundant memsets: Sergey removed unnecessary memset when processing printk.devkmsg command line option. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (27 commits) printk: drop redundant devkmsg_log_str memsets printk: Never set console_may_schedule in console_trylock() printk: Hide console waiter logic into helpers printk: Add console owner and waiter logic to load balance console writes kallsyms: remove print_symbol() function checkpatch: add pF/pf deprecation warning symbol lookup: introduce dereference_symbol_descriptor() parisc64: Add .opd based function descriptor dereference powerpc64: Add .opd based function descriptor dereference ia64: Add .opd based function descriptor dereference sections: split dereference_function_descriptor() openrisc: Fix conflicting types for _exext and _stext lib: do not use print_symbol() irq debug: do not use print_symbol() sysfs: do not use print_symbol() drivers: do not use print_symbol() x86: do not use print_symbol() unicore32: do not use print_symbol() sh: do not use print_symbol() mn10300: do not use print_symbol() ...
2018-02-01Merge tag 'driver-core-4.16-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of "big" driver core patches for 4.16-rc1. The majority of the work here is in the firmware subsystem, with reworks to try to attempt to make the code easier to handle in the long run, but no functional change. There's also some tree-wide sysfs attribute fixups with lots of acks from the various subsystem maintainers, as well as a handful of other normal fixes and changes. And finally, some license cleanups for the driver core and sysfs code. All have been in linux-next for a while with no reported issues" * tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits) device property: Define type of PROPERTY_ENRTY_*() macros device property: Reuse property_entry_free_data() device property: Move property_entry_free_data() upper firmware: Fix up docs referring to FIRMWARE_IN_KERNEL firmware: Drop FIRMWARE_IN_KERNEL Kconfig option USB: serial: keyspan: Drop firmware Kconfig options sysfs: remove DEBUG defines sysfs: use SPDX identifiers drivers: base: add coredump driver ops sysfs: add attribute specification for /sysfs/devices/.../coredump test_firmware: fix missing unlock on error in config_num_requests_store() test_firmware: make local symbol test_fw_config static sysfs: turn WARN() into pr_warn() firmware: Fix a typo in fallback-mechanisms.rst treewide: Use DEVICE_ATTR_WO treewide: Use DEVICE_ATTR_RO treewide: Use DEVICE_ATTR_RW sysfs.h: Use octal permissions component: add debugfs support bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate ...
2018-01-31Merge tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-3/+0
Pull dma mapping updates from Christoph Hellwig: "Except for a runtime warning fix from Christian this is all about consolidation of the generic no-IOMMU code, a well as the glue code for swiotlb. All the code is based on the x86 implementation with hooks to allow all architectures that aren't cache coherent to use it. The x86 conversion itself has been deferred because the x86 maintainers were a little busy in the last months" * tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping: (57 commits) MAINTAINERS: add the iommu list for swiotlb and xen-swiotlb arm64: use swiotlb_alloc and swiotlb_free arm64: replace ZONE_DMA with ZONE_DMA32 mips: use swiotlb_{alloc,free} mips/netlogic: remove swiotlb support tile: use generic swiotlb_ops tile: replace ZONE_DMA with ZONE_DMA32 unicore32: use generic swiotlb_ops ia64: remove an ifdef around the content of pci-dma.c ia64: clean up swiotlb support ia64: use generic swiotlb_ops ia64: replace ZONE_DMA with ZONE_DMA32 swiotlb: remove various exports swiotlb: refactor coherent buffer allocation swiotlb: refactor coherent buffer freeing swiotlb: wire up ->dma_supported in swiotlb_dma_ops swiotlb: add common swiotlb_map_ops swiotlb: rename swiotlb_free to swiotlb_exit x86: rename swiotlb_dma_ops powerpc: rename swiotlb_dma_ops ...
2018-01-30Merge branch 'misc.poll' of ↵Linus Torvalds2-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-30Merge branch 'siginfo-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo cleanups from Eric Biederman: "Long ago when 2.4 was just a testing release copy_siginfo_to_user was made to copy individual fields to userspace, possibly for efficiency and to ensure initialized values were not copied to userspace. Unfortunately the design was complex, it's assumptions unstated, and humans are fallible and so while it worked much of the time that design failed to ensure unitialized memory is not copied to userspace. This set of changes is part of a new design to clean up siginfo and simplify things, and hopefully make the siginfo handling robust enough that a simple inspection of the code can be made to ensure we don't copy any unitializied fields to userspace. The design is to unify struct siginfo and struct compat_siginfo into a single definition that is shared between all architectures so that anyone adding to the set of information shared with struct siginfo can see the whole picture. Hopefully ensuring all future si_code assignments are arch independent. The design is to unify copy_siginfo_to_user32 and copy_siginfo_from_user32 so that those function are complete and cope with all of the different cases documented in signinfo_layout. I don't think there was a single implementation of either of those functions that was complete and correct before my changes unified them. The design is to introduce a series of helpers including force_siginfo_fault that take the values that are needed in struct siginfo and build the siginfo structure for their callers. Ensuring struct siginfo is built correctly. The remaining work for 4.17 (unless someone thinks it is post -rc1 material) is to push usage of those helpers down into the architectures so that architecture specific code will not need to deal with the fiddly work of intializing struct siginfo, and then when struct siginfo is guaranteed to be fully initialized change copy siginfo_to_user into a simple wrapper around copy_to_user. Further there is work in progress on the issues that have been documented requires arch specific knowledge to sort out. The changes below fix or at least document all of the issues that have been found with siginfo generation. Then proceed to unify struct siginfo the 32 bit helpers that copy siginfo to and from userspace, and generally clean up anything that is not arch specific with regards to siginfo generation. It is a lot but with the unification you can of siginfo you can already see the code reduction in the kernel" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits) signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr mm/memory_failure: Remove unused trapno from memory_failure signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap signal: Helpers for faults with specialized siginfo layouts signal: Add send_sig_fault and force_sig_fault signal: Replace memset(info,...) with clear_siginfo for clarity signal: Don't use structure initializers for struct siginfo signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered ptrace: Use copy_siginfo in setsiginfo and getsiginfo signal: Unify and correct copy_siginfo_to_user32 signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32 signal: Unify and correct copy_siginfo_from_user32 signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h signal/powerpc: Remove redefinition of NSIGTRAP on powerpc signal: Move addr_lsb into the _sigfault union for clarity ...
2018-01-30Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds1-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main RCU changes in this cycle were: - Updates to use cond_resched() instead of cond_resched_rcu_qs() where feasible (currently everywhere except in kernel/rcu and in kernel/torture.c). Also a couple of fixes to avoid sending IPIs to offline CPUs. - Updates to simplify RCU's dyntick-idle handling. - Updates to remove almost all uses of smp_read_barrier_depends() and read_barrier_depends(). - Torture-test updates. - Miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits) torture: Save a line in stutter_wait(): while -> for torture: Eliminate torture_runnable and perf_runnable torture: Make stutter less vulnerable to compilers and races locking/locktorture: Fix num reader/writer corner cases locking/locktorture: Fix rwsem reader_delay torture: Place all torture-test modules in one MAINTAINERS group rcutorture/kvm-build.sh: Skip build directory check rcutorture: Simplify functions.sh include path rcutorture: Simplify logging rcutorture/kvm-recheck-*: Improve result directory readability check rcutorture/kvm.sh: Support execution from any directory rcutorture/kvm.sh: Use consistent help text for --qemu-args rcutorture/kvm.sh: Remove unused variable, `alldone` rcutorture: Remove unused script, config2frag.sh rcutorture/configinit: Fix build directory error message rcutorture: Preempt RCU-preempt readers more vigorously torture: Reduce #ifdefs for preempt_schedule() rcu: Remove have_rcu_nocb_mask from tree_plugin.h rcu: Add comment giving debug strategy for double call_rcu() tracing, rcu: Hide trace event rcu_nocb_wake when not used ...
2018-01-25firmware: Drop FIRMWARE_IN_KERNEL Kconfig optionBenjamin Gilbert1-1/+0
It doesn't actually do anything. Merge its help text into EXTRA_FIRMWARE. Fixes: 5620a0d1aacd ("firmware: delete in-kernel firmware") Fixes: 0946b2fb38fd ("firmware: cleanup FIRMWARE_IN_KERNEL message") Signed-off-by: Benjamin Gilbert <benjamin.gilbert@coreos.com> Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-15dma-mapping: clear harmful GFP_* flags in common codeChristoph Hellwig1-3/+0
Lift the code from x86 so that we behave consistently. In the future we should probably warn if any of these is set. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
2018-01-12mn10300/misalignment: Use SIGSEGV SEGV_MAPERR to report a failed user copyEric W. Biederman1-1/+1
Setting si_code to 0 is the same a setting si_code to SI_USER which is definitely not correct. With si_code set to SI_USER si_pid and si_uid will be copied to userspace instead of si_addr. Which is very wrong. So fix this by using a sensible si_code (SEGV_MAPERR) for this failure. Cc: stable@vger.kernel.org Fixes: b920de1b77b7 ("mn10300: add the MN10300/AM33 architecture to the kernel") Cc: David Howells <dhowells@redhat.com> Cc: Masakazu Urade <urade.masakazu@jp.panasonic.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-09Construct init thread stack in the linker script rather than by unionDavid Howells1-2/+0
Construct the init thread stack in the linker script rather than doing it by means of a union so that ia64's init_task.c can be got rid of. The following symbols are then made available from INIT_TASK_DATA() linker script macro: init_thread_union init_stack INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the size of the init stack. init_thread_union is given its own section so that it can be placed into the stack space in the right order. I'm assuming that the ia64 ordering is correct and that the task_struct is first and the thread_info second. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Will Deacon <will.deacon@arm.com> (arm64) Tested-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-05mn10300: do not use print_symbol()Sergey Senozhatsky1-3/+1
print_symbol() is a very old API that has been obsoleted by %pS format specifier in a normal printk() call. Replace print_symbol() with a direct printk("%pS") call. Link: http://lkml.kernel.org/r/20171211125025.2270-6-sergey.senozhatsky@gmail.com To: Andrew Morton <akpm@linux-foundation.org> To: Russell King <linux@armlinux.org.uk> To: Catalin Marinas <catalin.marinas@arm.com> To: Mark Salter <msalter@redhat.com> To: Tony Luck <tony.luck@intel.com> To: David Howells <dhowells@redhat.com> To: Yoshinori Sato <ysato@users.sourceforge.jp> To: Guan Xuetao <gxt@mprc.pku.edu.cn> To: Borislav Petkov <bp@alien8.de> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org> To: Thomas Gleixner <tglx@linutronix.de> To: Peter Zijlstra <peterz@infradead.org> To: Vineet Gupta <vgupta@synopsys.com> To: Fengguang Wu <fengguang.wu@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Petr Mladek <pmladek@suse.com> Cc: LKML <linux-kernel@vger.kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-ia64@vger.kernel.org Cc: linux-am33-list@redhat.com Cc: linux-sh@vger.kernel.org Cc: linux-edac@vger.kernel.org Cc: x86@kernel.org Cc: linux-snps-arc@lists.infradead.org Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> [pmladek@suse.com: updated commit message] Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-01-03arch: Remove clkdev.h asm-generic from KbuildStephen Boyd1-1/+0
Now that every architecture is using the generic clkdev.h file and we no longer include asm/clkdev.h anywhere in the tree, we can remove it. Cc: Russell King <linux@armlinux.org.uk> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: <linux-arch@vger.kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-03Merge branch 'for-mingo' of ↵Ingo Molnar1-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Updates to use cond_resched() instead of cond_resched_rcu_qs() where feasible (currently everywhere except in kernel/rcu and in kernel/torture.c). Also a couple of fixes to avoid sending IPIs to offline CPUs. - Updates to simplify RCU's dyntick-idle handling. - Updates to remove almost all uses of smp_read_barrier_depends() and read_barrier_depends(). - Miscellaneous fixes. - Torture-test updates. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-05bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program typeHendrik Brueckner1-0/+1
Commit 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type") introduced the bpf_perf_event_data structure which exports the pt_regs structure. This is OK for multiple architectures but fail for s390 and arm64 which do not export pt_regs. Programs using them, for example, the bpf selftest fail to compile on these architectures. For s390, exporting the pt_regs is not an option because s390 wants to allow changes to it. For arm64, there is a user_pt_regs structure that covers parts of the pt_regs structure for use by user space. To solve the broken uapi for s390 and arm64, introduce an abstract type for pt_regs and add an asm/bpf_perf_event.h file that concretes the type. An asm-generic header file covers the architectures that export pt_regs today. The arch-specific enablement for s390 and arm64 follows in separate commits. Reported-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Fixes: 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type") Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-04mn10300: READ_ONCE() now implies smp_read_barrier_depends()Paul E. McKenney1-2/+5
Given that READ_ONCE() now implies smp_read_barrier_depends(), there is no need for the open-coded smp_read_barrier_depends() in mn10300_serial_receive_interrupt() and mn10300_serial_poll_get_char(). This commit therefore removes them, but replaces them with comments calling out that carrying dependencies through non-pointers is quite dangerous. Compilers simply know too much about integers. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: <linux-am33-list@redhat.com>
2017-11-27switch wrapper poll.h instances to generic-yAl Viro2-2/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-17bug: define the "cut here" string in a single placeKees Cook1-1/+1
The "cut here" string is used in a few paths. Define it in a single place. Link: http://lkml.kernel.org/r/1510100869-73751-3-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-8/+0
Merge updates from Andrew Morton: - a few misc bits - ocfs2 updates - almost all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (131 commits) memory hotplug: fix comments when adding section mm: make alloc_node_mem_map a void call if we don't have CONFIG_FLAT_NODE_MEM_MAP mm: simplify nodemask printing mm,oom_reaper: remove pointless kthread_run() error check mm/page_ext.c: check if page_ext is not prepared writeback: remove unused function parameter mm: do not rely on preempt_count in print_vma_addr mm, sparse: do not swamp log with huge vmemmap allocation failures mm/hmm: remove redundant variable align_end mm/list_lru.c: mark expected switch fall-through mm/shmem.c: mark expected switch fall-through mm/page_alloc.c: broken deferred calculation mm: don't warn about allocations which stall for too long fs: fuse: account fuse_inode slab memory as reclaimable mm, page_alloc: fix potential false positive in __zone_watermark_ok mm: mlock: remove lru_add_drain_all() mm, sysctl: make NUMA stats configurable shmem: convert shmem_init_inodecache() to void Unify migrate_pages and move_pages access checks mm, pagevec: rename pagevec drained field ...
2017-11-15mm, arch: remove empty_bad_page*Michal Hocko1-8/+0
empty_bad_page() and empty_bad_pte_table() seem to be relics from old days which is not used by any code for a long time. I have tried to find when exactly but this is not really all that straightforward due to many code movements - traces disappear around 2.4 times. Anyway no code really references neither empty_bad_page nor empty_bad_pte_table. We only allocate the storage which is not used by anybody so remove them. Link: http://lkml.kernel.org/r/20171004150045.30755-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Ralf Baechle <ralf@linus-mips.org> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: David Howells <dhowells@redhat.com> Cc: Rich Felker <dalias@libc.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15Merge tag 'pci-v4.15-changes' of ↵Linus Torvalds2-7/+0
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...
2017-11-14Merge tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-10/+0
Pull dma-mapping updates from Christoph Hellwig: - turn dma_cache_sync into a dma_map_ops instance and remove implementation that purely are dead because the architecture doesn't support noncoherent allocations - add a flag for busses that need DMA configuration (Robin Murphy) * tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: turn dma_cache_sync into a dma_map_ops method sh: make dma_cache_sync a no-op xtensa: make dma_cache_sync a no-op unicore32: make dma_cache_sync a no-op powerpc: make dma_cache_sync a no-op mn10300: make dma_cache_sync a no-op microblaze: make dma_cache_sync a no-op ia64: make dma_cache_sync a no-op frv: make dma_cache_sync a no-op x86: make dma_cache_sync a no-op floppy: consolidate the dummy fd_cacheflush definition drivers: flag buses which demand DMA configuration
2017-11-07PCI: Remove unused declarationsBjorn Helgaas1-3/+0
Remove these unused declarations: pcibios_config_init() # never defined anywhere pcibios_scan_root() # only defined by x86 pcibios_get_irq_routing_table() # only defined by x86 pcibios_set_irq_routing() # only defined by x86 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org>
2017-11-07PCI: Remove redundant pci_dev, pci_bus, resource declarationsBjorn Helgaas1-2/+0
<linux/pci.h> defines struct pci_bus and struct pci_dev and includes the struct resource definition before including <asm/pci.h>. Nobody includes <asm/pci.h> directly, so they don't need their own declarations. Remove the redundant struct pci_dev, pci_bus, resource declarations. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> # CRIS Acked-by: Ralf Baechle <ralf@linux-mips.org> # MIPS
2017-11-07PCI: Remove redundant pcibios_set_master() declarationsBjorn Helgaas1-2/+0
All users of pcibios_set_master() include <linux/pci.h>, which already has a declaration. Remove the unnecessary declarations from the <asm/pci.h> files. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> # CRIS Acked-by: Ralf Baechle <ralf@linux-mips.org> # MIPS
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar47-0/+47
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02License cleanup: add SPDX license identifier to uapi header files with a licenseGreg Kroah-Hartman9-0/+9
Many user space API headers have licensing information, which is either incomplete, badly formatted or just a shorthand for referring to the license under which the file is supposed to be. This makes it hard for compliance tools to determine the correct license. Update these files with an SPDX license identifier. The identifier was chosen based on the license information in the file. GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license identifier with the added 'WITH Linux-syscall-note' exception, which is the officially assigned exception identifier for the kernel syscall exception: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". This exception makes it possible to include GPL headers into non GPL code, without confusing license compliance tools. Headers which have either explicit dual licensing or are just licensed under a non GPL license are updated with the corresponding SPDX identifier and the GPLv2 with syscall exception identifier. The format is: ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE) SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. The update does not remove existing license information as this has to be done on a case by case basis and the copyright holders might have to be consulted. This will happen in a separate step. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX license identifier to uapi header files with no ↵Greg Kroah-Hartman19-0/+19
license Many user space API headers are missing licensing information, which makes it hard for compliance tools to determine the correct license. By default are files without license information under the default license of the kernel, which is GPLV2. Marking them GPLV2 would exclude them from being included in non GPLV2 code, which is obviously not intended. The user space API headers fall under the syscall exception which is in the kernels COPYING file: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". otherwise syscall usage would not be possible. Update the files which contain no license information with an SPDX license identifier. The chosen identifier is 'GPL-2.0 WITH Linux-syscall-note' which is the officially assigned identifier for the Linux syscall exception. SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman19-0/+19
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland1-2/+2
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-19dma-mapping: turn dma_cache_sync into a dma_map_ops methodChristoph Hellwig1-6/+0
After we removed all the dead wood it turns out only two architectures actually implement dma_cache_sync as a real op: mips and parisc. Add a cache_sync method to struct dma_map_ops and implement it for the mips defualt DMA ops, and the parisc pa11 ops. Note that arm, arc and openrisc support DMA_ATTR_NON_CONSISTENT, but never provided a functional dma_cache_sync implementations, which seems somewhat odd. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2017-10-19mn10300: make dma_cache_sync a no-opChristoph Hellwig1-4/+0
mn10300 does not implement DMA_ATTR_NON_CONSISTENT allocations, so it doesn't make any sense to do any work in dma_cache_sync given that it must be a no-op when dma_alloc_attrs returns coherent memory. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2017-10-10locking/arch: Remove dummy arch_{read,spin,write}_lock_flags() implementationsWill Deacon1-3/+1
The arch_{read,spin,write}_lock_flags() macros are simply mapped to the non-flags versions by the majority of architectures, so do this in core code and remove the dummy implementations. Also remove the implementation in spinlock_up.h, since all callers of do_raw_spin_lock_flags() call local_irq_save(flags) anyway. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1507055129-12300-4-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10locking/core: Remove {read,spin,write}_can_lock()Will Deacon1-12/+0
Outside of the locking code itself, {read,spin,write}_can_lock() have no users in tree. Apparmor (the last remaining user of write_can_lock()) got moved over to lockdep by the previous patch. This patch removes the use of {read,spin,write}_can_lock() from the BUILD_LOCK_OPS macro, deferring to the trylock operation for testing the lock status, and subsequently removes the unused macros altogether. They aren't guaranteed to work in a concurrent environment and can give incorrect results in the case of qrwlock. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1507055129-12300-2-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-22arch: remove unused *_segments() macros/functionsTobias Klauser1-12/+0
Some architectures define the no-op macros/functions copy_segments, release_segments and forget_segments. These are used nowhere in the tree, so removed them. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Vineet Gupta <vgupta@synopsys.com> [for arch/arc] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08mn10300: defconfig: cleanup from old Kconfig optionsKrzysztof Kozlowski2-14/+0
Remove old, dead Kconfig options (in order appearing in this commit): - EXPERIMENTAL is gone since v3.9; - INET_LRO: commit 7bbf3cae65b6 ("ipv4: Remove inet_lro library"); - MTD_PARTITIONS: commit 6a8a98b22b10 ("mtd: kill CONFIG_MTD_PARTITIONS"); - MTD_CHAR: commit 660685d9d1b4 ("mtd: merge mtdchar module with mtdcore"); - NETDEV_1000 and NETDEV_10000: commit f860b0522f65 ("drivers/net: Kconfig and Makefile cleanup"); NET_ETHERNET should be replaced with just ETHERNET but that is separate change; - HID_SUPPORT: commit 1f41a6a99476 ("HID: Fix the generic Kconfig options"); - RCU_CPU_STALL_DETECTOR: commit a00e0d714fbd ("rcu: Remove conditional compilation for RCU CPU stall warnings"); Link: http://lkml.kernel.org/r/1500526786-3789-1-git-send-email-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+2
Pull networking updates from David Miller: 1) Support ipv6 checksum offload in sunvnet driver, from Shannon Nelson. 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric Dumazet. 3) Allow generic XDP to work on virtual devices, from John Fastabend. 4) Add bpf device maps and XDP_REDIRECT, which can be used to build arbitrary switching frameworks using XDP. From John Fastabend. 5) Remove UFO offloads from the tree, gave us little other than bugs. 6) Remove the IPSEC flow cache, from Florian Westphal. 7) Support ipv6 route offload in mlxsw driver. 8) Support VF representors in bnxt_en, from Sathya Perla. 9) Add support for forward error correction modes to ethtool, from Vidya Sagar Ravipati. 10) Add time filter for packet scheduler action dumping, from Jamal Hadi Salim. 11) Extend the zerocopy sendmsg() used by virtio and tap to regular sockets via MSG_ZEROCOPY. From Willem de Bruijn. 12) Significantly rework value tracking in the BPF verifier, from Edward Cree. 13) Add new jump instructions to eBPF, from Daniel Borkmann. 14) Rework rtnetlink plumbing so that operations can be run without taking the RTNL semaphore. From Florian Westphal. 15) Support XDP in tap driver, from Jason Wang. 16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal. 17) Add Huawei hinic ethernet driver. 18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan Delalande. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits) i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq i40e: avoid NVM acquire deadlock during NVM update drivers: net: xgene: Remove return statement from void function drivers: net: xgene: Configure tx/rx delay for ACPI drivers: net: xgene: Read tx/rx delay for ACPI rocker: fix kcalloc parameter order rds: Fix non-atomic operation on shared flag variable net: sched: don't use GFP_KERNEL under spin lock vhost_net: correctly check tx avail during rx busy polling net: mdio-mux: add mdio_mux parameter to mdio_mux_init() rxrpc: Make service connection lookup always check for retry net: stmmac: Delete dead code for MDIO registration gianfar: Fix Tx flow control deactivation cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6 cxgb4: Fix pause frame count in t4_get_port_stats cxgb4: fix memory leak tun: rename generic_xdp to skb_xdp tun: reserve extra headroom only when XDP is set net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping net: dsa: bcm_sf2: Advertise number of egress queues ...
2017-08-17arch: Remove spin_unlock_wait() arch-specific definitionsPaul E. McKenney1-5/+0
There is no agreed-upon definition of spin_unlock_wait()'s semantics, and it appears that all callers could do just as well with a lock/unlock pair. This commit therefore removes the underlying arch-specific arch_spin_unlock_wait() for all architectures providing them. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: <linux-arch@vger.kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Boqun Feng <boqun.feng@gmail.com>
2017-08-03sock: add SOCK_ZEROCOPY sockoptWillem de Bruijn1-0/+2
The send call ignores unknown flags. Legacy applications may already unwittingly pass MSG_ZEROCOPY. Continue to ignore this flag unless a socket opts in to zerocopy. Introduce socket option SO_ZEROCOPY to enable MSG_ZEROCOPY processing. Processes can also query this socket option to detect kernel support for the feature. Older kernels will return ENOPROTOOPT. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Ingo Molnar: "A fix to WARN_ON_ONCE() done by modules, plus a MAINTAINERS update" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debug: Fix WARN_ON_ONCE() for modules MAINTAINERS: Update the PTRACE entry
2017-07-20debug: Fix WARN_ON_ONCE() for modulesJosh Poimboeuf1-1/+1
Mike Galbraith reported a situation where a WARN_ON_ONCE() call in DRM code turned into an oops. As it turns out, WARN_ON_ONCE() seems to be completely broken when called from a module. The bug was introduced with the following commit: 19d436268dde ("debug: Add _ONCE() logic to report_bug()") That commit changed WARN_ON_ONCE() to move its 'once' logic into the bug trap handler. It requires a writable bug table so that the BUGFLAG_DONE bit can be written to the flags to indicate the first warning has occurred. The bug table was made writable for vmlinux, which relies on vmlinux.lds.S and vmlinux.lds.h for laying out the sections. However, it wasn't made writable for modules, which rely on the ELF section header flags. Reported-by: Mike Galbraith <efault@gmx.de> Tested-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 19d436268dde ("debug: Add _ONCE() logic to report_bug()") Link: http://lkml.kernel.org/r/a53b04235a65478dd9afc51f5b329fdc65c84364.1500095401.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-12kernel/watchdog: introduce arch_touch_nmi_watchdog()Nicholas Piggin3-5/+7
For architectures that define HAVE_NMI_WATCHDOG, instead of having them provide the complete touch_nmi_watchdog() function, just have them provide arch_touch_nmi_watchdog(). This gives the generic code more flexibility in implementing this function, and arch implementations don't miss out on touching the softlockup watchdog or other generic details. Link: http://lkml.kernel.org/r/20170616065715.18390-3-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Don Zickus <dzickus@redhat.com> Reviewed-by: Babu Moger <babu.moger@oracle.com> Tested-by: Babu Moger <babu.moger@oracle.com> [sparc] Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds3-24/+2
Merge misc updates from Andrew Morton: - a few hotfixes - various misc updates - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (108 commits) mm, memory_hotplug: move movable_node to the hotplug proper mm, memory_hotplug: drop CONFIG_MOVABLE_NODE mm, memory_hotplug: drop artificial restriction on online/offline mm: memcontrol: account slab stats per lruvec mm: memcontrol: per-lruvec stats infrastructure mm: memcontrol: use generic mod_memcg_page_state for kmem pages mm: memcontrol: use the node-native slab memory counters mm: vmstat: move slab statistics from zone to node counters mm/zswap.c: delete an error message for a failed memory allocation in zswap_dstmem_prepare() mm/zswap.c: improve a size determination in zswap_frontswap_init() mm/zswap.c: delete an error message for a failed memory allocation in zswap_pool_create() mm/swapfile.c: sort swap entries before free mm/oom_kill: count global and memory cgroup oom kills mm: per-cgroup memory reclaim stats mm: kmemleak: treat vm_struct as alternative reference to vmalloc'ed objects mm: kmemleak: factor object reference updating out of scan_block() mm: kmemleak: slightly reduce the size of some structures on 64-bit architectures mm, mempolicy: don't check cpuset seqlock where it doesn't matter mm, cpuset: always use seqlock when changing task's nodemask mm, mempolicy: simplify rebinding mempolicies when updating cpusets ...
2017-07-06Merge branch 'uaccess.strlen' of ↵Linus Torvalds3-11/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull user access str* updates from Al Viro: "uaccess str...() dead code removal" * 'uaccess.strlen' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: s390 keyboard.c: don't open-code strndup_user() mips: get rid of unused __strnlen_user() get rid of unused __strncpy_from_user() instances kill strlen_user()
2017-07-06mn10300: use generic fb.hTobias Klauser2-23/+1
The mn10300 arch uses a verbatim copy of the asm-generic version and does not add any own implementations to the header, so use asm-generic/fb.h instead of duplicating code. Link: http://lkml.kernel.org/r/20170517083348.1815-1-tklauser@distanz.ch Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06mn10300: remove wrapper header for asm/device.hTobias Klauser2-1/+1
mn10300's asm/device.h is merely including asm-generic/device.h. Thus, the arch specific header can be omitted and the generic header can be used directly. Link: http://lkml.kernel.org/r/20170517124857.26834-1-tklauser@distanz.ch Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+4
Pull networking updates from David Miller: "Reasonably busy this cycle, but perhaps not as busy as in the 4.12 merge window: 1) Several optimizations for UDP processing under high load from Paolo Abeni. 2) Support pacing internally in TCP when using the sch_fq packet scheduler for this is not practical. From Eric Dumazet. 3) Support mutliple filter chains per qdisc, from Jiri Pirko. 4) Move to 1ms TCP timestamp clock, from Eric Dumazet. 5) Add batch dequeueing to vhost_net, from Jason Wang. 6) Flesh out more completely SCTP checksum offload support, from Davide Caratti. 7) More plumbing of extended netlink ACKs, from David Ahern, Pablo Neira Ayuso, and Matthias Schiffer. 8) Add devlink support to nfp driver, from Simon Horman. 9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa Prabhu. 10) Add stack depth tracking to BPF verifier and use this information in the various eBPF JITs. From Alexei Starovoitov. 11) Support XDP on qed device VFs, from Yuval Mintz. 12) Introduce BPF PROG ID for better introspection of installed BPF programs. From Martin KaFai Lau. 13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann. 14) For loads, allow narrower accesses in bpf verifier checking, from Yonghong Song. 15) Support MIPS in the BPF selftests and samples infrastructure, the MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David Daney. 16) Support kernel based TLS, from Dave Watson and others. 17) Remove completely DST garbage collection, from Wei Wang. 18) Allow installing TCP MD5 rules using prefixes, from Ivan Delalande. 19) Add XDP support to Intel i40e driver, from Björn Töpel 20) Add support for TC flower offload in nfp driver, from Simon Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub Kicinski, and Bert van Leeuwen. 21) IPSEC offloading support in mlx5, from Ilan Tayari. 22) Add HW PTP support to macb driver, from Rafal Ozieblo. 23) Networking refcount_t conversions, From Elena Reshetova. 24) Add sock_ops support to BPF, from Lawrence Brako. This is useful for tuning the TCP sockopt settings of a group of applications, currently via CGROUPs" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits) net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap cxgb4: Support for get_ts_info ethtool method cxgb4: Add PTP Hardware Clock (PHC) support cxgb4: time stamping interface for PTP nfp: default to chained metadata prepend format nfp: remove legacy MAC address lookup nfp: improve order of interfaces in breakout mode net: macb: remove extraneous return when MACB_EXT_DESC is defined bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case bpf: fix return in load_bpf_file mpls: fix rtm policy in mpls_getroute net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t net, ax25: convert ax25_route.refcount from atomic_t to refcount_t net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t ...
2017-07-03Merge branch 'timers-core-for-linus' of ↵Linus Torvalds2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "A rather large update for timers/timekeeping: - compat syscall consolidation (Al Viro) - Posix timer consolidation (Christoph Helwig / Thomas Gleixner) - Cleanup of the device tree based initialization for clockevents and clocksources (Daniel Lezcano) - Consolidation of the FTTMR010 clocksource/event driver (Linus Walleij) - The usual set of small fixes and updates all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (93 commits) timers: Make the cpu base lock raw clocksource/drivers/mips-gic-timer: Fix an error code in 'gic_clocksource_of_init()' clocksource/drivers/fsl_ftm_timer: Unmap region obtained by of_iomap clocksource/drivers/tcb_clksrc: Make IO endian agnostic clocksource/drivers/sun4i: Switch to the timer-of common init clocksource/drivers/timer-of: Fix invalid iomap check Revert "ktime: Simplify ktime_compare implementation" clocksource/drivers: Fix uninitialized variable use in timer_of_init kselftests: timers: Add test for frequency step kselftests: timers: Fix inconsistency-check to not ignore first timestamp time: Add warning about imminent deprecation of CONFIG_GENERIC_TIME_VSYSCALL_OLD time: Clean up CLOCK_MONOTONIC_RAW time handling posix-cpu-timers: Make timespec to nsec conversion safe itimer: Make timeval to nsec conversion range limited timers: Fix parameter description of try_to_del_timer_sync() ktime: Simplify ktime_compare implementation clocksource/drivers/fttmr010: Factor out clock read code clocksource/drivers/fttmr010: Implement delay timer clocksource/drivers: Add timer-of common init routine clocksource/drivers/tcb_clksrc: Save timer context on suspend/resume ...
2017-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-13/+0
A set of overlapping changes in macvlan and the rocker driver, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>