summaryrefslogtreecommitdiffstats
path: root/arch/mips/ralink
AgeCommit message (Collapse)AuthorFilesLines
2023-01-03of/fdt: run soc memory setup when early_init_dt_scan_memory failsAndreas Rammhold1-1/+1
If memory has been found early_init_dt_scan_memory now returns 1. If it hasn't found any memory it will return 0, allowing other memory setup mechanisms to carry on. Previously early_init_dt_scan_memory always returned 0 without distinguishing between any kind of memory setup being done or not. Any code path after the early_init_dt_scan memory call in the ramips plat_mem_setup code wouldn't be executed anymore. Making early_init_dt_scan_memory the only way to initialize the memory. Some boards, including my mt7621 based Cudy X6 board, depend on memory initialization being done via the soc_info.mem_detect function pointer. Those wouldn't be able to obtain memory and panic the kernel during early bootup with the message "early_init_dt_alloc_memory_arch: Failed to allocate 12416 bytes align=0x40". Fixes: 1f012283e936 ("of/fdt: Rework early_init_dt_scan_memory() to call directly") Cc: stable@vger.kernel.org Signed-off-by: Andreas Rammhold <andreas@rammhold.de> Link: https://lore.kernel.org/r/20221223112748.2935235-1-andreas@rammhold.de Signed-off-by: Rob Herring <robh@kernel.org>
2022-12-21MIPS: ralink: mt7621: avoid to init common ralink reset controllerSergio Paracuellos1-1/+3
Commit 38a8553b0a22 ("clk: ralink: make system controller node a reset provider") make system controller a reset provider for mt7621 ralink SoCs. Ralink init code also tries to start previous common reset controller which at the end tries to find device tree node 'ralink,rt2880-reset'. mt7621 device tree file is not using at all this node anymore. Hence avoid to init this common reset controller for mt7621 ralink SoCs to avoid 'Failed to find reset controller node' boot error trace error. Fixes: 64b2d6ffff86 ("staging: mt7621-dts: align resets with binding documentation") Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-12-01mips: ralink: mt7621: do not use kzalloc too earlyJohn Thomson1-5/+9
With CONFIG_SLUB=y, following commit 6edf2576a6cc ("mm/slub: enable debugging memory wasting of kmalloc") mt7621 failed to boot very early, without showing any console messages. This exposed the pre-existing bug of mt7621.c using kzalloc before normal memory management was available. Prior to this slub change, there existed the unintended protection against "kmem_cache *s" being NULL as slab_pre_alloc_hook() happened to return NULL and bailed out of slab_alloc_node(). This allowed mt7621 prom_soc_init to fail in the soc_dev_init kzalloc, but continue booting without the SOC_BUS driver device registered. Console output from a DEBUG_ZBOOT vmlinuz kernel loading, with mm/slub modified to warn on kmem_cache zero or null: zimage at: 80B842A0 810B4BC0 Uncompressing Linux at load address 80001000 Copy device tree to address 80B80EE0 Now, booting the kernel... [ 0.000000] Linux version 6.1.0-rc3+ (john@john) (mipsel-buildroot-linux-gnu-gcc.br_real (Buildroot 2021.11-4428-g6b6741b) 12.2.0, GNU ld (GNU Binutils) 2.39) #73 SMP Wed Nov 2 05:10:01 AEST 2022 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at mm/slub.c:3416 kmem_cache_alloc+0x5a4/0x5e8 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.1.0-rc3+ #73 [ 0.000000] Stack : 810fff78 80084d98 00000000 00000004 00000000 00000000 80889d04 80c90000 [ 0.000000] 80920000 807bd328 8089d368 80923bd3 00000000 00000001 80889cb0 00000000 [ 0.000000] 00000000 00000000 807bd328 8084bcb1 00000002 00000002 00000001 6d6f4320 [ 0.000000] 00000000 80c97d3d 80c97d68 fffffffc 807bd328 00000000 00000000 00000000 [ 0.000000] 00000000 a0000000 80910000 8110a0b4 00000000 00000020 80010000 80010000 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<80008260>] show_stack+0x28/0xf0 [ 0.000000] [<8070c958>] dump_stack_lvl+0x60/0x80 [ 0.000000] [<8002e184>] __warn+0xc4/0xf8 [ 0.000000] [<8002e210>] warn_slowpath_fmt+0x58/0xa4 [ 0.000000] [<801c0fac>] kmem_cache_alloc+0x5a4/0x5e8 [ 0.000000] [<8092856c>] prom_soc_init+0x1fc/0x2b4 [ 0.000000] [<80928060>] prom_init+0x44/0xf0 [ 0.000000] [<80929214>] setup_arch+0x4c/0x6a8 [ 0.000000] [<809257e0>] start_kernel+0x88/0x7c0 [ 0.000000] [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 [ 0.000000] printk: bootconsole [early0] enabled Allowing soc_device_register to work exposed oops in the mt7621 phy pci, and pci controller drivers from soc_device_match_attr, due to missing sentinels in the quirks tables. These were fixed with: commit 819b885cd886 ("phy: ralink: mt7621-pci: add sentinel to quirks table") not yet applied ("PCI: mt7621: add sentinel to quirks table") Link: https://lore.kernel.org/linux-mm/becf2ac3-2a90-4f3a-96d9-a70f67c66e4a@app.fastmail.com/ Fixes: 71b9b5e0130d ("MIPS: ralink: mt7621: introduce 'soc_device' initialization") Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-12-01mips: ralink: mt7621: soc queries and tests as functionsJohn Thomson1-25/+61
Move the SoC register value queries and tests to specific functions, to remove repetition of logic No functional changes intended Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-12-01mips: ralink: mt7621: define MT7621_SYSC_BASE with __iomemJohn Thomson1-4/+3
So that MT7621_SYSC_BASE can be used later in multiple functions without needing to repeat this __iomem declaration each time Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-09-19mips: ralink: convert to DEFINE_SHOW_ATTRIBUTELiu Shixin1-13/+2
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-06-21mips: ralink: Fix refcount leak in of.cLiang He1-0/+2
In plat_of_remap_node(), plat_of_remap_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-03-28Merge tag 'staging-5.18-rc1' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big set of staging driver updates for 5.18-rc1. Loads of tiny cleanups for almost all staging drivers in here, nothing major at all. Highlights include: - remove the ashmem Android driver. It is long-dead and if there are any legacy userspace applications still using it, the Android kernel images will maintain it, the community shouldn't care about it anymore - wfx wifi driver major cleanups. Should be ready to merge out of staging soon, and will coordinate with the wifi maintainers after -rc1 is out - major cleanups and unwinding of the layers of the r8188eu driver. It's amazing just how many unneeded layers of abstraction is in there, just when we think it's done, another is found... - lots of tiny coding style cleanups in many other staging drivers. All have been in linux-next for a while with no reported problems" * tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (455 commits) staging: r8188eu: remove unnecessary memset in r8188eu staging: greybus: introduce pwm_ops::apply staging: rts5208: Resolve checkpatch.pl issues. staging: sm750fb: fix naming style staging: fbtft: Consider type of init sequence values in fbtft_init_display() staging: fbtft: Constify buf parameter in fbtft_dbg_hex() staging: mmal-vchiq: clear redundant item named bulk_scratch mips: dts: ralink: add MT7621 SoC staging: r8188eu: remove some unused local ieee80211 macros staging: r8188eu: make rtl8188e_process_phy_info static staging: r8188eu: remove unused function prototype staging: r8188eu: remove three unused receive defines staging: r8188eu: remove unnecessary initializations staging: rtl8192e: Fix spelling mistake "RESQUEST" -> "REQUEST" MAINTAINERS: remove the obsolete file entry for staging in ANDROID DRIVERS staging: r8188eu: proper error handling in rtw_init_drv_sw staging: r8188eu: call _cancel_timer_ex from _rtw_free_recv_priv staging: vt6656: Removed unused variable vt3342_vnt_threshold staging: vt6656: Removed unused variable bb_vga_0 staging: remove ashmem ...
2022-03-25Merge tag 'mips_5.18' of ↵Linus Torvalds2-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - added support for QCN550x (ath79) - enabled KCSAN - removed TX39XX support - various cleanups and fixes * tag 'mips_5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (31 commits) MIPS: Fix build error for loongson64 and sgi-ip27 MIPS: ingenic: correct unit node address MIPS: Fix wrong comments in asm/prom.h MIPS: Remove redundant definitions of device_tree_init() MIPS: Remove redundant check in device_tree_init() MIPS: pgalloc: fix memory leak caused by pgd_free() MIPS: RB532: fix return value of __setup handler MIPS: Only use current_stack_pointer on GCC MIPS: boot/compressed: Use array reference for image bounds mips: cdmm: Fix refcount leak in mips_cdmm_phys_base mips: remove reference to "newer Loongson-3" mips: Always permit to build u-boot images MIPS: Sanitise Cavium switch cases in TLB handler synthesizers DEC: Limit PMAX memory probing to R3k systems mips: DEC: honor CONFIG_MIPS_FP_SUPPORT=n MIPS: fix fortify panic when copying asm exception handlers mips: ralink: fix a refcount leak in ill_acc_of_setup() mips: Implement "current_stack_pointer" MIPS: Remove TX39XX support MIPS: Modernize READ_IMPLIES_EXEC ...
2022-03-16mips: dts: ralink: add MT7621 SoCArınç ÜNAL1-0/+5
The MT7621 system-on-a-chip includes an 880 MHz MIPS1004Kc dual-core CPU, a 5-port 10/100/1000 switch/PHY and one RGMII. Add the devicetrees for GB-PC1 and GB-PC2 devices which use MT7621 SoC. Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20220315160149.3617-1-arinc.unal@arinc9.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-14MIPS: Remove redundant definitions of device_tree_init()Tiezhu Yang1-5/+0
There exists many same definitions of device_tree_init() for various platforms, add a weak function in arch/mips/kernel/prom.c to clean up the related code. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-03-01mips: ralink: fix a refcount leak in ill_acc_of_setup()Hangyu Hua1-0/+1
of_node_put(np) needs to be called when pdev == NULL. Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-03-01MIPS: ralink: mt7621: use bitwise NOT instead of logicalIlya Lipnitskiy1-1/+1
It was the intention to reverse the bits, not make them all zero by using logical NOT operator. Fixes: cc19db8b312a ("MIPS: ralink: mt7621: do memory detection on KSEG1") Suggested-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-02-16MIPS: ralink: mt7621: do memory detection on KSEG1Chuanhong Guo1-13/+23
It's reported that current memory detection code occasionally detects larger memory under some bootloaders. Current memory detection code tests whether address space wraps around on KSEG0, which is unreliable because it's cached. Rewrite memory size detection to perform the same test on KSEG1 instead. While at it, this patch also does the following two things: 1. use a fixed pattern instead of a random function pointer as the magic value. 2. add an additional memory write and a second comparison as part of the test to prevent possible smaller memory detection result due to leftover values in memory. Fixes: 139c949f7f0a MIPS: ("ralink: mt7621: add memory detection support") Reported-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Tested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-01-16Merge tag 'pci-v5.17-changes' of ↵Linus Torvalds1-0/+31
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Use pci_find_vsec_capability() instead of open-coding it (Andy Shevchenko) - Convert pci_dev_present() stub from macro to static inline to avoid 'unused variable' errors (Hans de Goede) - Convert sysfs slot attributes from default_attrs to default_groups (Greg Kroah-Hartman) - Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum (Rajat Jain) - Remove unnecessary initialization of static variables (Longji Guo) Resource management: - Always write Intel I210 ROM BAR on update to work around device defect (Bjorn Helgaas) PCIe native device hotplug: - Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede) - Fix infinite loop in pciehp IRQ handler on power fault (Lukas Wunner) Power management: - Convert amd64-agp, sis-agp, via-agp from legacy PCI power management to generic power management (Vaibhav Gupta) IOMMU: - Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller so it can work with an IOMMU (Yifeng Li) Error handling: - Add PCI_ERROR_RESPONSE and related definitions for signaling and checking for transaction errors on PCI (Naveen Naidu) - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead of in host controller drivers, when transactions fail on PCI (Naveen Naidu) - Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads (Naveen Naidu) Peer-to-peer DMA: - Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas) ASPM: - Calculate link L0s and L1 exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Calculate device L0s and L1 acceptable exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Remove struct aspm_latency since it's no longer needed (Saheed O. Bolarinwa) APM X-Gene PCIe controller driver: - Fix IB window setup, which was broken by the fact that IB resources are now sorted in address order instead of DT dma-ranges order (Rob Herring) Apple PCIe controller driver: - Enable clock gating to save power (Hector Martin) - Fix REFCLK1 enable/poll logic (Hector Martin) Broadcom STB PCIe controller driver: - Declare bitmap correctly for use by bitmap interfaces (Christophe JAILLET) - Clean up computation of legacy and non-legacy MSI bitmasks (Florian Fainelli) - Update suspend/resume/remove error handling to warn about errors and not fail the operation (Jim Quinlan) - Correct the "pcie" and "msi" interrupt descriptions in DT binding (Jim Quinlan) - Add DT bindings for endpoint voltage regulators (Jim Quinlan) - Split brcm_pcie_setup() into two functions (Jim Quinlan) - Add mechanism for turning on voltage regulators for connected devices (Jim Quinlan) - Turn voltage regulators for connected devices on/off when bus is added or removed (Jim Quinlan) - When suspending, don't turn off voltage regulators for wakeup devices (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Add i.MX8MM support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Use DWC common ops instead of layerscape-specific link-up functions (Hou Zhiqiang) Intel VMD host bridge driver: - Honor platform ACPI _OSC feature negotiation for Root Ports below VMD (Kai-Heng Feng) - Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan) - Reset everything below VMD before enumerating to work around failure to enumerate NVMe devices when guest OS reboots (Nirmal Patel) Bridge emulation (used by Marvell Aardvark and MVEBU): - Make emulated ROM BAR read-only by default (Pali Rohár) - Make some emulated legacy PCI bits read-only for PCIe devices (Pali Rohár) - Update reserved bits in emulated PCIe Capability (Pali Rohár) - Allow drivers to emulate different PCIe Capability versions (Pali Rohár) - Set emulated Capabilities List bit for all PCIe devices, since they must have at least a PCIe Capability (Pali Rohár) Marvell Aardvark PCIe controller driver: - Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2, DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali Rohár) - Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2 registers (Pali Rohár) - Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár) - Disable bus mastering when unbinding host controller driver (Pali Rohár) - Mask all interrupts when unbinding host controller driver (Pali Rohár) - Fix memory leak in host controller unbind (Pali Rohár) - Assert PERST# when unbinding host controller driver (Pali Rohár) - Disable link training when unbinding host controller driver (Pali Rohár) - Disable common PHY when unbinding host controller driver (Pali Rohár) - Fix resource type checking to check only IORESOURCE_MEM, not IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár) Marvell MVEBU PCIe controller driver: - Implement pci_remap_iospace() for ARM so mvebu can use devm_pci_remap_iospace() instead of the previous ARM-specific pci_ioremap_io() interface (Pali Rohár) - Use the standard pci_host_probe() instead of the device-specific mvebu_pci_host_probe() (Pali Rohár) - Replace all uses of ARM-specific pci_ioremap_io() with the ARM implementation of the standard pci_remap_iospace() interface and remove pci_ioremap_io() (Pali Rohár) - Skip initializing invalid Root Ports (Pali Rohár) - Check for errors from pci_bridge_emul_init() (Pali Rohár) - Ignore any bridges at non-zero function numbers (Pali Rohár) - Return ~0 data for invalid config read size (Pali Rohár) - Disallow mapping interrupts on emulated bridges (Pali Rohár) - Clear Root Port Memory & I/O Space Enable and Bus Master Enable at initialization (Pali Rohár) - Make type bits in Root Port I/O Base register read-only (Pali Rohár) - Disable Root Port windows when base/limit set to invalid values (Pali Rohár) - Set controller to Root Complex mode (Pali Rohár) - Set Root Port Class Code to PCI Bridge (Pali Rohár) - Update emulated Root Port secondary bus numbers to better reflect the actual topology (Pali Rohár) - Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so pci_reset_secondary_bus() can reset connected devices (Pali Rohár) - Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root Ports (Pali Rohár) - Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports (Pali Rohár) - Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on Armada XP and newer devices (Pali Rohár) - Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module (Pali Rohár) - Add support for compiling as a module (Pali Rohár) MediaTek PCIe controller driver: - Assert PERST# for 100ms to allow power and clock to stabilize (qizhong cheng) MediaTek PCIe Gen3 controller driver: - Disable Mediatek DVFSRC voltage request since lack of DVFSRC to respond to the request causes failure to exit L1 PM Substate (Jianjun Wang) MediaTek MT7621 PCIe controller driver: - Declare mt7621_pci_ops static (Sergio Paracuellos) - Give pcibios_root_bridge_prepare() access to host bridge windows (Sergio Paracuellos) - Move MIPS I/O coherency unit setup from driver to pcibios_root_bridge_prepare() (Sergio Paracuellos) - Add missing MODULE_LICENSE() (Sergio Paracuellos) - Allow COMPILE_TEST for all arches (Sergio Paracuellos) Microsoft Hyper-V host bridge driver: - Add hv-internal interfaces to encapsulate arch IRQ dependencies (Sunil Muthuswamy) - Add arm64 Hyper-V vPCI support (Sunil Muthuswamy) Qualcomm PCIe controller driver: - Undo PM setup in qcom_pcie_probe() error handling path (Christophe JAILLET) - Use __be16 type to store return value from cpu_to_be16() (Manivannan Sadhasivam) - Constify static dw_pcie_ep_ops (Rikard Falkeborn) Renesas R-Car PCIe controller driver: - Fix aarch32 abort handler so it doesn't check the wrong bus clock before accessing the host controller (Marek Vasut) TI Keystone PCIe controller driver: - Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode DT properties (Kishon Vijay Abraham I) MicroSemi Switchtec management driver: - Add Gen4 automotive device IDs (Kelvin Cao) - Declare state_names[] as static so it's not allocated and initialized for every call (Kelvin Cao) Host controller driver cleanups: - Use of_device_get_match_data(), not of_match_device(), when we only need the device data in altera, artpec6, cadence, designware-plat, dra7xx, keystone, kirin (Fan Fei) - Drop pointless of_device_get_match_data() cast in j721e (Bjorn Helgaas) - Drop redundant struct device * from j721e since struct cdns_pcie already has one (Bjorn Helgaas) - Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4, mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier, xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei) - Fix invalid address space conversions in hisi, spear13xx (Bjorn Helgaas) Miscellaneous: - Sort Intel Device IDs by value (Andy Shevchenko) - Change Capability offsets to hex to match spec (Baruch Siach) - Correct misspellings (Krzysztof Wilczyński) - Terminate statement with semicolon in pci_endpoint_test.c (Ming Wang)" * tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits) PCI: mt7621: Allow COMPILE_TEST for all arches PCI: mt7621: Add missing MODULE_LICENSE() PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare() PCI: Let pcibios_root_bridge_prepare() access bridge->windows PCI: mt7621: Declare mt7621_pci_ops static PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: Add mechanism to turn on subdev regulators PCI: brcmstb: Split brcm_pcie_setup() into two funcs dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map. PCI: brcmstb: Fix function return value handling PCI: brcmstb: Do not use __GENMASK PCI: brcmstb: Declare 'used' as bitmap, not unsigned long PCI: hv: Add arm64 Hyper-V vPCI support PCI: hv: Make the code arch neutral by adding arch specific interfaces PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors x86/PCI: Remove initialization of static variables to false PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum misc: pci_endpoint_test: Terminate statement with semicolon ...
2022-01-14Merge tag 'mips_5.17' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - add support for more BCM47XX based devices - add MIPS support for brcmstb PCIe controller - add Loongson 2K1000 reset driver - remove board support for rbtx4938/rbtx4939 - remove support for TX4939 SoCs - fixes and cleanups * tag 'mips_5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (59 commits) MIPS: ath79: drop _machine_restart again PCI: brcmstb: Augment driver for MIPs SOCs MIPS: bmips: Remove obsolete DMA mapping support MIPS: bmips: Add support PCIe controller device nodes dt-bindings: PCI: Add compatible string for Brcmstb 74[23]5 MIPs SOCs MIPS: compressed: Fix build with ZSTD compression MIPS: BCM47XX: Add support for Netgear WN2500RP v1 & v2 MIPS: BCM47XX: Add support for Netgear R6300 v1 MIPS: BCM47XX: Add LEDs and buttons for Asus RTN-10U MIPS: BCM47XX: Add board entry for Linksys WRT320N v1 MIPS: BCM47XX: Define Linksys WRT310N V2 buttons MIPS: Remove duplicated include in local.h MIPS: retire "asm/llsc.h" MIPS: rework local_t operation on MIPS64 MIPS: fix local_{add,sub}_return on MIPS64 mips/pci: remove redundant ret variable MIPS: Loongson64: Add missing of_node_put() in ls2k_reset_init() MIPS: new Kconfig option ZBOOT_LOAD_ADDRESS MIPS: enable both vmlinux.gz.itb and vmlinuz for generic MIPS: signal: Return immediately if call fails ...
2022-01-12PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare()Sergio Paracuellos1-0/+31
On the MIPS ralink mt7621 platform, we need to set up I/O coherency units based on the host bridge apertures. To remove this arch dependency from the driver itself, move the coherency setup from the driver to pcibios_root_bridge_prepare(). [bhelgaas: squash add/remove into one patch, commit log] Link: https://lore.kernel.org/r/20211207104924.21327-3-sergio.paracuellos@gmail.com Link: https://lore.kernel.org/r/20211207104924.21327-4-sergio.paracuellos@gmail.com Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> # arch/mips Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> # arch/mips
2021-12-16of/fdt: Rework early_init_dt_scan_memory() to call directlyRob Herring1-15/+4
Use of the of_scan_flat_dt() function predates libfdt and is discouraged as libfdt provides a nicer set of APIs. Rework early_init_dt_scan_memory() to be called directly and use libfdt. Cc: John Crispin <john@phrozen.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: linux-mips@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211215150102.1303588-1-robh@kernel.org
2021-12-14mips: ralink: add missing of_node_put() call in ill_acc_of_setup()Wang Qing1-0/+1
of_find_compatible_node() takes a reference to the device_node which needs to be dropped when done. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-10-21PCI: mt7621: Add MediaTek MT7621 PCIe host controller driverSergio Paracuellos1-1/+2
Add driver for the PCIe controller of the MT7621 SoC. [bhelgaas: rename from pci-mt7621.c to pcie-mt7621.c; also rename Kconfig symbol from PCI_MT7621 to PCIE_MT7621] Link: https://lore.kernel.org/r/20210922050035.18162-3-sergio.paracuellos@gmail.com Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12mips: Bulk conversion to generic_handle_domain_irq()Marc Zyngier1-1/+1
Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-07-01Merge tag 'pinctrl-v5.14-1' of ↵Linus Torvalds6-552/+0
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.14 kernel. Not so much going on. No core changes, just drivers. The most interesting would be that MIPS Ralink is migrating to pin control and we have some bindings but not yet code for the Apple M1 pin controller. New drivers: - Last merge window we created a driver for the Ralink RT2880. We are now moving the Ralink SoC pin control drivers out of the MIPS architecture code and into the pin control subsystem. This concerns RT288X, MT7620, RT305X, RT3883 and MT7621. - Qualcomm SM6125 SoC pin control driver. - Qualcomm spmi-gpio support for PM7325. - Qualcomm spmi-mpp also handles PMI8994 (just a compatible string) - Mediatek MT8365 SoC pin controller. - New device HID for the AMD GPIO controller. Improvements: - Pin bias config support for a slew of Renesas pin controllers. - Incremental improvements and non-urgent bug fixes to the Renesas SoC drivers. - Implement irq_set_wake on the AMD pin controller so we can wake up from external pin events. Misc: - Devicetree bindings for the Apple M1 pin controller, we will probably see a proper driver for this soon as well" * tag 'pinctrl-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (54 commits) pinctrl: ralink: rt305x: add missing include pinctrl: stm32: check for IRQ MUX validity during alloc() pinctrl: zynqmp: some code cleanups drivers: qcom: pinctrl: Add pinctrl driver for sm6125 dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver dt-bindings: pinctrl: mcp23s08: add documentation for reset-gpios pinctrl: mcp23s08: Add optional reset GPIO pinctrl: mediatek: fix mode encoding pinctrl: mcp23s08: Fix missing unlock on error in mcp23s08_irq() pinctrl: bcm: Constify static pinmux_ops pinctrl: bcm: Constify static pinctrl_ops pinctrl: ralink: move RT288X SoC pinmux config into a new 'pinctrl-rt288x.c' file pinctrl: ralink: move MT7620 SoC pinmux config into a new 'pinctrl-mt7620.c' file pinctrl: ralink: move RT305X SoC pinmux config into a new 'pinctrl-rt305x.c' file pinctrl: ralink: move RT3883 SoC pinmux config into a new 'pinctrl-rt3883.c' file pinctrl: ralink: move MT7621 SoC pinmux config into a new 'pinctrl-mt7621.c' file pinctrl: ralink: move ralink architecture pinmux header into the driver pinctrl: single: config: enable the pin's input pinctrl: mtk: Fix mt8365 Kconfig dependency pinctrl: mcp23s08: fix race condition in irq handler ...
2021-07-01Merge tag 'clk-for-linus' of ↵Linus Torvalds2-66/+3
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round has a diffstat dominated by Qualcomm clk drivers. Honestly though that's just a bunch of data so the diffstat reflects that. Looking beyond that there's just a bunch of updates all around in various clk drivers. Renesas and NXP (for i.MX) are two SoC vendors that have a lot of patches in here. Overall the driver changes look to be mostly enabling more clks and non-critical fixes that we could hold until the next merge window. I'm especially excited about the series from Arnd that graduates clkdev to be the only implementation of clk_get() and clk_put(). That's a good step in the right direction to migreate eveerything over to the common clk framework. Now we don't have to worry about clkdev specific details, they're just part of the clk API now. Core: - clkdev is now the only option, i.e. clk_get()/clk_put() is implemented in only one place in the kernel instead of in drivers/clk/clkdev.c and in architectures that want their own implementation New Drivers: - Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant Clock Jitter Cleaner With Dual Loop PLLs - Qualcomm MDM9607 GCC - Qualcomm SC8180X display clks - Qualcomm SM6125 GCC - Qualcomm SM8250 CAMCC (camera) - Renesas RZ/G2L SoC - Hisilicon hi3559A SoC Updates: - Stop using clock-output-names in ST clk drivers (yay!) - Support secure mode of STM32MP1 SoCs - Improve clock support for Actions S500 SoC - duty cycle setting support on qcom clks - Add TI am33xx spread spectrum clock support - Use determine_rate() for the Amlogic pll ops instead of round_rate() - Restrict Amlogic gp0/1 and audio plls range on g12a/sm1 - Improve Amlogic axg-audio controller error on deferral - Add NNA clocks on Amlogic g12a - Reduce memory footprint of Rockchip PLL rate tables - A fix for the newly added Rockchip rk3568 clk driver - Exported clock for the newly added Rockchip video decoder - Remove audio ipg clock from i.MX8MP - Remove deprecated legacy clock binding for i.MX SCU clock driver - Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM - Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif, audio, parallel interface) - Add dedicated clock ops for i.MX paralel interface - Different fixes for clocks controlled by ATF on i.MX SoCs - Add A53/A72 frequency scaling support i.MX clk-scu driver - Add special case for DCSS clock on suspend for i.MX clk-scu driver - Add parent save/restore on suspend/resume to i.MX clk-scu driver - Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver - Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their bindings - Tegra clk driver no longer deasserts resets on clk_enable as it gets in the way of certain power-up sequences - Fix compile testing for Tegra clk driver - One patch to fix a divider on the Allwinner v3s Audio PLL - Add support for CPU core clock boost modes on Renesas R-Car Gen3 - Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U - Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate() and improve support for multiple parents - Switch Renesas RZ/N1 divider clocks to .determine_rate() - Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3 - Convert ar7 to common clk framework - Convert ralink to common clk framework" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (161 commits) clk: zynqmp: Handle divider specific read only flag clk: zynqmp: Use firmware specific mux clock flags clk: zynqmp: Use firmware specific divider clock flags clk: zynqmp: Use firmware specific common clock flags clk: lmk04832: Use of match table clk: lmk04832: Depend on SPI clk: stm32mp1: new compatible for secure RCC support dt-bindings: clock: stm32mp1 new compatible for secure rcc dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15 dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15 dt-bindings: clock: add IDs for SCMI clocks on stm32mp15 reset: stm32mp1: remove stm32mp1 reset clk: hisilicon: Add clock driver for hi3559A SoC dt-bindings: Document the hi3559a clock bindings clk: si5341: Add sysfs properties to allow checking/resetting device faults clk: si5341: Add silabs,iovdd-33 property clk: si5341: Add silabs,xaxb-ext-clk property clk: si5341: Allow different output VDD_SEL values clk: si5341: Update initialization magic clk: si5341: Check for input clock presence and PLL lock on startup ...
2021-06-08mips: ralink: convert to CONFIG_COMMON_CLKArnd Bergmann2-66/+3
ralink only has a very trivial clock implementation, with everything being fixed clocks. Convert it to CONFIG_COMMON_CLK to reduce the number of platforms that rely on legacy clocks. Of course, the clocks really should be read from the device tree instead, but this is a step into that direction. This adds about 50KB to the kernel image size, which is an unfortunate increase, but not as bad as I had feared: text data bss dec hex filename 3778560 1582216 92256 5453032 5334e8 vmlinux-vocore-before 3822148 1601192 92304 5515644 54297c vmlinux-vocore-after 3870226 1644468 200192 5714886 5733c6 vmlinux-rt305x-before 3916727 1668404 200240 5785371 58471b vmlinux-rt305x-after Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-07pinctrl: ralink: move RT288X SoC pinmux config into a new 'pinctrl-rt288x.c' ↵Sergio Paracuellos1-21/+0
file Move all related code for SoC RT288X into a new driver located in 'pinctrl-rt288x.c' source file. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210604115159.8834-7-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-07pinctrl: ralink: move MT7620 SoC pinmux config into a new 'pinctrl-mt7620.c' ↵Sergio Paracuellos1-320/+0
file Move all related code for SoC MT7620 into a new driver located in 'pinctrl-mt7620.c' source file. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210604115159.8834-6-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-07pinctrl: ralink: move RT305X SoC pinmux config into a new 'pinctrl-rt305x.c' ↵Sergio Paracuellos1-77/+0
file Move all related code for SoC RT305X into a new driver located in 'pinctrl-rt305x.c' source file. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210604115159.8834-5-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-07pinctrl: ralink: move RT3883 SoC pinmux config into a new 'pinctrl-rt3883.c' ↵Sergio Paracuellos1-45/+0
file Move all related code for SoC RT3883 into a new driver located in 'pinctrl-rt3883.c' source file Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210604115159.8834-4-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-07pinctrl: ralink: move MT7621 SoC pinmux config into a new 'pinctrl-mt7621.c' ↵Sergio Paracuellos1-88/+0
file Move all related code for SoC MT7621 into a new driver located in 'pinctrl-mt7621.c' source file. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210604115159.8834-3-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-07pinctrl: ralink: move ralink architecture pinmux header into the driverSergio Paracuellos1-1/+0
Ralink architecture is making use of the header located in 'arch/mips/include/asm/mach-ralink/pinmux.h' to stablish the mechanisms to make derived SoCs to set its pin functions and groups. In order to move all architecture pinmux into a more accurate place which is 'drivers/pinctrl/ralink' we have to first of all move this file also there with a small modification which creates 'rt2880_pinmux_init' function to allow SoCs pinctrl drivers to pass its configuration to the common code located in 'pinctrl-rt2880.c' file. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210604115159.8834-2-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-25MIPS: ralink: export rt_sysc_membase for rt2880_wdt.cRandy Dunlap1-0/+2
rt2880_wdt.c uses (well, attempts to use) rt_sysc_membase. However, when this watchdog driver is built as a loadable module, there is a build error since the rt_sysc_membase symbol is not exported. Export it to quell the build error. ERROR: modpost: "rt_sysc_membase" [drivers/watchdog/rt2880_wdt.ko] undefined! Fixes: 473cf939ff34 ("watchdog: add ralink watchdog driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-29Merge tag 'mips_5.13' of ↵Linus Torvalds9-10/+49
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - removed get_fs/set_fs - removed broken/unmaintained MIPS KVM trap and emulate support - added support for Loongson-2K1000 - fixes and cleanups * tag 'mips_5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (107 commits) MIPS: BCM63XX: Use BUG_ON instead of condition followed by BUG. MIPS: select ARCH_KEEP_MEMBLOCK unconditionally mips: Do not include hi and lo in clobber list for R6 MIPS:DTS:Correct the license for Loongson-2K MIPS:DTS:Fix label name and interrupt number of ohci for Loongson-2K MIPS: Avoid handcoded DIVU in `__div64_32' altogether lib/math/test_div64: Correct the spelling of "dividend" lib/math/test_div64: Fix error message formatting mips/bootinfo:correct some comments of fw_arg MIPS: Avoid DIVU in `__div64_32' is result would be zero MIPS: Reinstate platform `__div64_32' handler div64: Correct inline documentation for `do_div' lib/math: Add a `do_div' test module MIPS: Makefile: Replace -pg with CC_FLAGS_FTRACE MIPS: pci-legacy: revert "use generic pci_enable_resources" MIPS: Loongson64: Add kexec/kdump support MIPS: pci-legacy: use generic pci_enable_resources MIPS: pci-legacy: remove busn_resource field MIPS: pci-legacy: remove redundant info messages MIPS: pci-legacy: stop using of_pci_range_to_resource ...
2021-04-12staging: mt7621-dts: use valid vendor 'mediatek' instead of invalid 'mtk'Sergio Paracuellos1-3/+3
Vendor listed for mediatek in kernel vendor file 'vendor-prefixes.yaml' contains 'mediatek' as a valid vendor string. Some nodes in the device tree are using an invalid vendor string vfor 'mtk' instead. Fix all of them in dts file. Update also ralink mt7621 related code to properly match new strings. Even there are used in the device tree there are some strings that are not referred anywhere but have been also updated with new vendor name. These are 'mtk,mt7621-wdt', 'mtk,mt7621-nand', 'mtk,mt7621-mc', and 'mtk,mt7621-cpc'. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210410055059.13518-4-sergio.paracuellos@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-06MIPS: ralink: rt288x: select MIPS_AUTO_PFN_OFFSETIlya Lipnitskiy1-0/+1
RT288X systems may have a non-zero ramstart causing problems with memory reservations and boot hangs, as well as messages like: Wasting 1048576 bytes for tracking 32768 unused pages Both are alleviated by selecting MIPS_AUTO_PFN_OFFSET for such platforms. Tested on a Belkin F5D8235 v1 RT2880 device. Link: https://lore.kernel.org/linux-mips/20180820233111.xww5232dxbuouf4n@pburton-laptop/ Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Mike Rapoport <rppt@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-29MIPS: ralink: mt7621: add memory detection supportChuanhong Guo3-4/+28
mt7621 has the following memory map: 0x0-0x1c000000: lower 448m memory 0x1c000000-0x2000000: peripheral registers 0x20000000-0x2400000: higher 64m memory detect_memory_region in arch/mips/kernel/setup.c only adds the first memory region and isn't suitable for 512m memory detection because it may accidentally read the memory area for peripheral registers. This commit adds memory detection capability for mt7621: 1. Add the highmem area when 512m is detected. 2. Guard memcmp from accessing peripheral registers: This only happens when a user decided to change kernel load address to 256m or higher address. Since this is a quite unusual case, we just skip 512m testing and return 256m as memory size. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> [Minor commit message reword, make mt7621_memory_detect static] Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-29MIPS: ralink: annotate prom_soc_init() with __initIlya Lipnitskiy6-6/+6
prom_soc_init is only called from prom_init in arch/mips/ralink/prom.c, which is already annotated with __init, so annotate prom_soc_init with __init too. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-25MIPS: ralink: define stubs for clk_set_parent to fix compile testingKrzysztof Kozlowski1-0/+14
The Ralink MIPS platform does not use Common Clock Framework and does not define certain clock operations leading to compile test failures: /usr/bin/mips-linux-gnu-ld: drivers/usb/phy/phy-tegra-usb.o: in function `tegra_usb_phy_init': phy-tegra-usb.c:(.text+0x1dd4): undefined reference to `clk_get_parent' Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: John Crispin <john@phrozen.org> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-04MIPS: ralink: manage low reset linesSander Vanheule1-2/+2
Reset lines with indices smaller than 8 are currently considered invalid by the rt2880-reset reset controller. The MT7621 SoC uses a number of these low reset lines. The DTS defines reset lines "hsdma", "fe", and "mcm" with respective values 5, 6, and 2. As a result of the above restriction, these resets cannot be asserted or de-asserted by the reset controller. In cases where the bootloader does not de-assert these lines, this results in e.g. the MT7621's internal switch staying in reset. Change the reset controller to only ignore the system reset, so all reset lines with index greater than 0 are considered valid. Signed-off-by: Sander Vanheule <sander@svanheule.net> Acked-by: John Crispin <john@phrozen.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-04MIPS: of: Introduce helper function to get DTBThomas Bogendoerfer1-8/+3
Selection of the DTB to be used was burried in more or less readable code in head.S. Move this code into a inline helper function and use it. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2021-01-07MIPS: Remove empty prom_free_prom_memory functionsThomas Bogendoerfer1-4/+0
Most of the prom_free_prom_memory functions are empty. With a new weak prom_free_prom_memory() we can remove all of them. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2021-01-07MIPS: Use address-of operator on section symbolsNathan Chancellor1-1/+1
When building xway_defconfig with clang: arch/mips/lantiq/prom.c:82:23: error: array comparison always evaluates to true [-Werror,-Wtautological-compare] else if (__dtb_start != __dtb_end) ^ 1 error generated. These are not true arrays, they are linker defined symbols, which are just addresses. Using the address of operator silences the warning and does not change the resulting assembly with either clang/ld.lld or gcc/ld (tested with diff + objdump -Dr). Do the same thing across the entire MIPS subsystem to ensure there are no more warnings around this type of comparison. Link: https://github.com/ClangBuiltLinux/linux/issues/1232 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-10-12MIPS: replace add_memory_region with memblockThomas Bogendoerfer1-2/+1
add_memory_region was the old interface for registering memory and was already changed to used memblock internaly. Replace it by directly calling memblock functions. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-06-10Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ...
2020-05-31MIPS: ralink: drop ralink_clk_init for mt7621Chuanhong Guo1-43/+0
ralink_clk_init is only called in arch/mips/ralink/clk.c which isn't compiled for mt7621. And it doesn't export a proper cpu clock. Drop this unused function. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-31MIPS: ralink: bootrom: mark a function as __init to save some memoryChristophe JAILLET1-1/+1
'bootrom_setup()' is only called via 'postcore_initcall'. It can be marked as __init to save a few bytes of memory. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-15MIPS: ralink: Don't include objects twiceThomas Bogendoerfer1-1/+0
With the change of platform file inclusion object were included via platform-y and core-y. Remove the core-y part to fix it. Fixes: 26bff9eb49201aeb ("MIPS: Only include the platformfile needed") Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-05clk: Allow the common clk framework to be selectableStephen Boyd1-0/+4
Enable build testing and configuration control of the common clk framework so that more code coverage and testing can be done on the common clk framework across various architectures. This also nicely removes the requirement that architectures must select the framework when they don't use it in architecture code. There's one snag with doing this, and that's making sure that randconfig builds don't select this option when some architecture or platform implements 'struct clk' outside of the common clk framework. Introduce a new config option 'HAVE_LEGACY_CLK' to indicate those platforms that haven't migrated to the common clk framework and therefore shouldn't be allowed to select this new config option. Also add a note that we hope one day to remove this config entirely. Based on a patch by Mark Brown <broonie@kernel.org>. Cc: Mark Brown <broonie@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Russell King <linux@armlinux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: <linux-mips@vger.kernel.org> Cc: <linux-c6x-dev@linux-c6x.org> Cc: <linux-m68k@lists.linux-m68k.org> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <linux-sh@vger.kernel.org> Link: https://lore.kernel.org/r/1470915049-15249-1-git-send-email-broonie@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20200409064416.83340-8-sboyd@kernel.org Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2020-03-28MIPS: ralink: mt7621: Fix soc_device introductionThomas Bogendoerfer2-2/+3
Depending on selected SMP config options soc_device didn't get initialised at all. With UP config vmlinux didn't link because of missing soc bus. Fixes: 71b9b5e0130d ("MIPS: ralink: mt7621: introduce 'soc_device' initialization") Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Tested-by: René van Dorst <opensource@vdorst.com>
2020-03-23MIPS: ralink: mt7621: introduce 'soc_device' initializationSergio Paracuellos1-1/+31
mt7621 SoC has its own 'ralink_soc_info' structure with some information about the soc itself. Pcie controller and pcie phy drivers for this soc which are still in staging git tree make uses of 'soc_device_attribute' looking for revision 'E2' in order to know if reset lines are or not inverted. This way of doing things seems to be necessary in order to make things clean and properly. Hence, introduce this 'soc_device' to be able to properly use those attributes in drivers. Also set 'data' pointer points to the struct 'ralink_soc_info' to be able to export also current soc information using this mechanism. Cc: Paul Burton <paul.burton@mips.com> Cc: ralf@linux-mips.org Cc: jhogan@kernel.org Cc: john@phrozen.org Cc: NeilBrown <neil@brown.name> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-mips@vger.kernel.org Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-05MIPS: Replace setup_irq() by request_irq()afzal mohammed1-10/+8
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). remove_irq() has been replaced by free_irq() as well. There were build error's during previous version, couple of which was reported by kbuild test robot <lkp@intel.com> of which one was reported by Thomas Bogendoerfer <tsbogend@alpha.franken.de> as well. There were a few more issues including build errors, those also have been fixed. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-20 14:34:47 +0000