summaryrefslogtreecommitdiffstats
path: root/arch/mips/configs/generic
AgeCommit message (Collapse)AuthorFilesLines
2022-09-30mips: update config filesLukas Bulwahn1-1/+0
Clean up config files by: - removing configs that were deleted in the past - removing configs not in tree and without recently pending patches - adding new configs that are replacements for old configs in the file For some detailed information, see Link. Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-08-12MIPS: config: generic: Add config for Marduk boardJiaxun Yang1-0/+53
The config is minimal config to allow it boot from SD Card. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-11-13drivers: staging: retire drivers/staging/goldfishRoman Kiryanov1-1/+0
Android Studio Emulator (goldfish) migrated to Intel HDA. Signed-off-by: Roman Kiryanov <rkir@google.com> Link: https://lore.kernel.org/r/20201112234907.3761694-1-rkir@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-02mips: Drop CONFIG_MTD_M25P80 in various defconfig filesBin Meng1-1/+0
Drop CONFIG_MTD_M25P80 that was removed in commit b35b9a10362d ("mtd: spi-nor: Move m25p80 code in spi-nor.c") Signed-off-by: Bin Meng <bin.meng@windriver.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-02-19MIPS: configs: Cleanup old Kconfig optionsKrzysztof Kozlowski1-1/+0
CONFIG_MTD_NAND_IDS is gone and not needed (part of CONFIG_MTD_NAND) since commit f16bd7ca0457 ("mtd: nand: Kill the MTD_NAND_IDS Kconfig option"). CONFIG_IOSCHED_DEADLINE, CONFIG_IOSCHED_CFQ and CONFIG_DEFAULT_NOOP are gone since commit f382fb0bcef4 ("block: remove legacy IO schedulers"). The IOSCHED_DEADLINE was replaced by MQ_IOSCHED_DEADLINE and it will be now enabled by default (along with MQ_IOSCHED_KYBER). The BFQ_GROUP_IOSCHED is the only multiqueue scheduler which comes with group scheduling so select it in configs previously choosing CFQ_GROUP_IOSCHED. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org
2020-01-22MIPS: generic: don't unconditionally select PINCTRLAlexander Lobakin1-0/+1
CONFIG_PINCTRL was converted from hidden selectable to a visible option with commit d219b924611a ("pinctrl: change Kconfig PINCTRL variable to a menuconfig"). Remove unconditional select and enable this symbol in Ocelot config, which currently is the only user among generic boards. Signed-off-by: Alexander Lobakin <alobakin@dlink.ru> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Cc: Will Deacon <will@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Allison Randal <allison@lohutok.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-05-05Merge tag 'nand/for-5.2' of ↵Richard Weinberger2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next NAND core changes: - Support having the bad block markers in either the first, second or last page of a block. The combination of all three location is now possible. - Constification of NAND_OP_PARSER(_PATTERN) elements. - Generic NAND DT bindings changed to yaml format (can be used to check the proposed bindings. First platform to be fully supported: sunxi. - Stopped using several legacy hooks. - Preparation to use the generic NAND layer with the addition of several helpers and the removal of the struct nand_chip from generic functions. - Kconfig cleanup to prepare the introduction of external ECC engines support. - Fallthrough comments. - Introduction of the SPI-mem dirmap API for SPI-NAND devices. Raw NAND controller drivers changes: - nandsim: * Switch to ->exec-op(). - meson: * Misc cleanups and fixes. * New OOB layout. - Sunxi: * A23/A33 NAND DMA support. - Ingenic: * Full reorganization and cleanup. * Clear separation between NAND controller and ECC engine. * Support JZ4740 an JZ4725B. - Denali: * Clear controller/chip separation. * ->exec_op() migration. * Various cleanups. - fsl_elbc: * Enable software ECC support. - Atmel: * Sam9x60 support. - GPMI: * Introduce the GPMI_IS_MXS() macro. - Various trivial/spelling/coding style fixes.
2019-04-18mtd: rawnand: Clarify Kconfig entry MTD_NANDMiquel Raynal2-2/+2
MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: nand: Clarify Kconfig entry for software Hamming ECC entriesMiquel Raynal1-1/+1
The software Hamming ECC correction implementation is referred as MTD_NAND_ECC which is too generic. Rename it MTD_NAND_ECC_SW_HAMMING. Also rename MTD_NAND_ECC_SMC which is an SMC quirk in the Hamming implementation as MTD_NAND_ECC_SW_HAMMING_SMC. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: nand: Clarify Kconfig entry for software BCH ECC algorithmMiquel Raynal1-1/+1
There is no point in having two distinct entries, merge them and rename the symbol for more clarity: MTD_NAND_ECC_SW_BCH Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-04MIPS: generic: Add switchdev, pinctrl and fit to ocelot_defconfigHoratiu Vultur1-0/+8
Some of the configuration were not selected by default anymore, therefore enable them again. Also remove some configs which are used for MSCC Ocelot. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: <alexandre.belloni@bootlin.com> Cc: <UNGLinuxDriver@microchip.com> Cc: <ralf@linux-mips.org> Cc: <jhogan@kernel.org> Cc: <linux-mips@vger.kernel.org> Cc: <linux-kernel@vger.kernel.org>
2018-10-15MIPS: generic: Add Network, SPI and I2C to ocelot_defconfigAlexandre Belloni1-1/+9
Add support for the integrated switch, and the SPI and I2C controller found on MSCC Ocelot. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20345/ Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org
2018-03-21MIPS: generic: Add support for Microsemi OcelotAlexandre Belloni1-0/+35
Introduce support for the MIPS based Microsemi Ocelot SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Allan Nielsen <Allan.Nielsen@microsemi.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18858/ [jhogan@kernel.org: update ocelot_defconfig specification] Signed-off-by: James Hogan <jhogan@kernel.org>
2018-02-19MIPS: generic: Enable crc32-mips on r6 configsJames Hogan2-0/+4
Enable the crc32-mips module on MIPS generic r6 configs, where the required MIPS r6 CRC instructions may be available. As well as allowing the CRC instructions to be utilised, this should also ensure the module gets some build coverage. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: Marcin Nowakowski <marcin.nowakowski@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18602/
2018-01-22MIPS: ranchu: Add Ranchu as a new generic-based boardMiodrag Dinic1-0/+30
Provide amendments to the MIPS generic platform framework so that the new generic-based board Ranchu can be chosen to be built. The Ranchu board is intended to be used by Android emulator. The name "Ranchu" originates from Android development community. "Goldfish" and "Ranchu" are terms used for two generations of virtual boards used by Android emulator. The name "Ranchu" is a newer one among the two, and this patch deals with Ranchu. However, for historical reasons, some devices/drivers still contain the name "Goldfish". MIPS Ranchu machine includes a number of Goldfish devices. The support for Virtio devices is also included. Ranchu board supports up to 16 Virtio devices which can be attached using Virtio MMIO Bus. This is summarized in the following picture: ABUS ||----MIPS CPU || | IRQs ||----Goldfish PIC------------(32)-------- || | | | | | | | | | ||----Goldfish TTY------ | | | | | | | | || | | | | | | | | ||----Goldfish RTC-------- | | | | | | | || | | | | | | | ||----Goldfish FB----------- | | | | | | || | | | | | | ||----Goldfish Events--------- | | | | | || | | | | | ||----Goldfish Audio------------ | | | | || | | | | ||----Goldfish Battery------------ | | | || | | | ||----Android PIPE------------------ | | || | | ||----Virtio MMIO Bus | | || | | | | | || | | (virtio-block)--------- | || (16) | | || | (virtio-net)------------------ Device Tree is created on the QEMU side based on the information about devices IO map and IRQ numbers. Kernel will load this DTB using UHI boot protocol DTB handover mode. Signed-off-by: Miodrag Dinic <miodrag.dinic@mips.com> Signed-off-by: Goran Ferenc <goran.ferenc@mips.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18138/ Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-08MIPS: generic: Add support for MIPSfpgaZubair Lutfullah Kakakhel1-0/+22
Add support for the MIPSfpga platform to generic kernel. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15846/ [jhogan@kernel.org: Use separate board-xilfpga.its.S. Add 32r2 and little endian requires to board-xilfpga.config] Signed-off-by: James Hogan <jhogan@kernel.org>
2017-08-30MIPS: NI 169445: Only include in 32r2el kernelsPaul Burton1-0/+3
The NI 169445 board uses a little endian MIPS32r2 CPU, and therefore including board support in kernels that are unable to run on such a CPU is pointless. Specify requirements in the board config fragment that cause the NI 169445 board support to only be included in generic kernels that target little endian MIPS32r2 CPUs. For example, NI 169445 support will be included when configuring using 32r2el_defconfig but not when using 64r6_defconfig. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Nathan Sullivan <nathan.sullivan@ni.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16945/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-30MIPS: SEAD-3: Only include in 32 bit kernels by defaultPaul Burton1-0/+2
The MIPS SEAD-3 development board has only ever been used with 32 bit CPUs, so including support for it in 64 bit kernels is wasteful since those kernels will never run on a SEAD-3. Specify a requirement in the SEAD-3 board config fragment that ensures the board support is only included in 32 bit kernels, by checking that CONFIG_32BIT=y. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16944/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29MIPS: NI 169445 board supportNathan Sullivan1-0/+27
Support the National Instruments 169445 board. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Acked-by: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16782/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-07-11MIPS: generic: Support MIPS Boston development boardsPaul Burton1-0/+48
Add support for the MIPS Boston development board to generic kernels, which essentially amounts to: - Adding the device tree source for the MIPS Boston board. - Adding a Kconfig fragment which enables the appropriate drivers for the MIPS Boston board. With these changes in place generic kernels will support the board by default, and kernels with only the drivers needed for Boston enabled can be configured by setting BOARDS=boston during configuration. For example: $ make ARCH=mips 64r6el_defconfig BOARDS=boston Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16485/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: generic: Convert SEAD-3 to a generic boardPaul Burton1-0/+32
Convert the MIPS SEAD-3 board support to be a generic board, supported by generic kernels. Because the SEAD-3 boot protocol was defined long ago and we don't want to force a switch to the UHI protocol, SEAD-3 is added as a legacy board which is detected by reading the REVISION register. This may technically not be a valid memory read & future work will include attempting to handle that gracefully. In practice since SEAD-3 is the only legacy board supported by the generic kernel so far the read will only happen on SEAD-3 boards, and even once Malta is converted the same REVISION register exists there too. Other boards such as Boston, Ci20 & Ci40 will use the UHI boot protocol & thus not run any of the legacy board detect functions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14354/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: generic: Introduce generic DT-based board supportPaul Burton9-0/+26
Introduce a "generic" platform, which aims to be board-agnostic by making use of device trees passed by the boot protocol defined in the MIPS UHI (Universal Hosting Interface) specification. Provision is made for supporting boards which use a legacy boot protocol that can't be changed, but adding support for such boards or any others is left to followon patches. Right now the built kernels expect to be loaded to 0x80100000, ie. in kseg0. This is fine for the vast majority of MIPS platforms, but nevertheless it would be good to remove this limitation in the future by mapping the kernel via the TLB such that it can be loaded anywhere & map itself appropriately. Configuration is handled by dynamically generating configs using scripts/kconfig/merge_config.sh, somewhat similar to the way powerpc makes use of it. This allows for variations upon the configuration, eg. differing architecture revisions or subsets of driver support for differing boards, to be handled without having a large number of defconfig files. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14353/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-21 09:05:06 +0000