summaryrefslogtreecommitdiffstats
path: root/arch/arm64/kernel/insn.c
AgeCommit message (Collapse)AuthorFilesLines
2021-05-27arm64: Move instruction encoder/decoder under lib/Julien Thierry1-1458/+0
Aarch64 instruction set encoding and decoding logic can prove useful for some features/tools both part of the kernel and outside the kernel. Isolate the function dealing only with encoding/decoding instructions, with minimal dependency on kernel utilities in order to be able to reuse that code. Code was only moved, no code should have been added, removed nor modifier. Signed-off-by: Julien Thierry <jthierry@redhat.com> Link: https://lore.kernel.org/r/20210303170536.1838032-5-jthierry@redhat.com Signed-off-by: Will Deacon <will@kernel.org>
2021-05-27arm64: Move aarch32 condition check functionsJulien Thierry1-98/+0
The functions to check condition flags for aarch32 execution is only used to emulate aarch32 instructions. Move them from the instruction encoding/decoding code to the trap handling files. Signed-off-by: Julien Thierry <jthierry@redhat.com> Link: https://lore.kernel.org/r/20210303170536.1838032-3-jthierry@redhat.com [will: leave aarch32_opcode_cond_checks where it is] Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2021-05-27arm64: Move patching utilities out of instruction encoding/decodingJulien Thierry1-146/+3
Files insn.[c|h] containt some functions used for instruction patching. In order to reuse the instruction encoder/decoder, move the patching utilities to their own file. Signed-off-by: Julien Thierry <jthierry@redhat.com> Link: https://lore.kernel.org/r/20210303170536.1838032-2-jthierry@redhat.com [will: Include patching.h in insn.h to fix header mess; add __ASSEMBLY__ guards] Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2020-09-14arm64: kprobe: disable probe of fault prone ptrauth instructionAmit Daniel Kachhap1-6/+0
With the addition of ARMv8.3-FPAC feature, the probe of authenticate ptrauth instructions (AUT*) may cause ptrauth fault exception in case of authenticate failure so they cannot be safely single stepped. Hence the probe of authenticate instructions is disallowed but the corresponding pac ptrauth instruction (PAC*) is not affected and they can still be probed. Also AUTH* instructions do not make sense at function entry points so most realistic probes would be unaffected by this change. Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com> Reviewed-by: Dave Martin <dave.martin@arm.com> Link: https://lore.kernel.org/r/20200914083656.21428-6-amit.kachhap@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-09-14arm64: kprobe: add checks for ARMv8.3-PAuth combined instructionsAmit Daniel Kachhap1-1/+4
Currently the ARMv8.3-PAuth combined branch instructions (braa, retaa etc.) are not simulated for out-of-line execution with a handler. Hence the uprobe of such instructions leads to kernel warnings in a loop as they are not explicitly checked and fall into INSN_GOOD categories. Other combined instructions like LDRAA and LDRBB can be probed. The issue of the combined branch instructions is fixed by adding group definitions of all such instructions and rejecting their probes. The instruction groups added are br_auth(braa, brab, braaz and brabz), blr_auth(blraa, blrab, blraaz and blrabz), ret_auth(retaa and retab) and eret_auth(eretaa and eretab). Warning log: WARNING: CPU: 0 PID: 156 at arch/arm64/kernel/probes/uprobes.c:182 uprobe_single_step_handler+0x34/0x50 Modules linked in: CPU: 0 PID: 156 Comm: func Not tainted 5.9.0-rc3 #188 Hardware name: Foundation-v8A (DT) pstate: 804003c9 (Nzcv DAIF +PAN -UAO BTYPE=--) pc : uprobe_single_step_handler+0x34/0x50 lr : single_step_handler+0x70/0xf8 sp : ffff800012af3e30 x29: ffff800012af3e30 x28: ffff000878723b00 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: 0000000060001000 x22: 00000000cb000022 x21: ffff800012065ce8 x20: ffff800012af3ec0 x19: ffff800012068d50 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffff800010085c90 x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff80001205a9c8 x5 : ffff80001205a000 x4 : ffff80001233db80 x3 : ffff8000100a7a60 x2 : 0020000000000003 x1 : 0000fffffffff008 x0 : ffff800012af3ec0 Call trace: uprobe_single_step_handler+0x34/0x50 single_step_handler+0x70/0xf8 do_debug_exception+0xb8/0x130 el0_sync_handler+0x138/0x1b8 el0_sync+0x158/0x180 Fixes: 74afda4016a7 ("arm64: compile the kernel with ptrauth return address signing") Fixes: 04ca3204fa09 ("arm64: enable pointer authentication") Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Link: https://lore.kernel.org/r/20200914083656.21428-2-amit.kachhap@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-06-17maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofaultChristoph Hellwig1-2/+2
Better describe what these functions do. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-28Merge branch 'for-next/bti' into for-next/coreWill Deacon1-10/+22
Support for Branch Target Identification (BTI) in user and kernel (Mark Brown and others) * for-next/bti: (39 commits) arm64: vdso: Fix CFI directives in sigreturn trampoline arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction arm64: bti: Fix support for userspace only BTI arm64: kconfig: Update and comment GCC version check for kernel BTI arm64: vdso: Map the vDSO text with guarded pages when built for BTI arm64: vdso: Force the vDSO to be linked as BTI when built for BTI arm64: vdso: Annotate for BTI arm64: asm: Provide a mechanism for generating ELF note for BTI arm64: bti: Provide Kconfig for kernel mode BTI arm64: mm: Mark executable text as guarded pages arm64: bpf: Annotate JITed code for BTI arm64: Set GP bit in kernel page tables to enable BTI for the kernel arm64: asm: Override SYM_FUNC_START when building the kernel with BTI arm64: bti: Support building kernel C code using BTI arm64: Document why we enable PAC support for leaf functions arm64: insn: Report PAC and BTI instructions as skippable arm64: insn: Don't assume unrecognized HINTs are skippable arm64: insn: Provide a better name for aarch64_insn_is_nop() arm64: insn: Add constants for new HINT instruction decode arm64: Disable old style assembly annotations ...
2020-05-11arm64: insn: Fix two bugs in encoding 32-bit logical immediatesLuke Nelson1-7/+7
This patch fixes two issues present in the current function for encoding arm64 logical immediates when using the 32-bit variants of instructions. First, the code does not correctly reject an all-ones 32-bit immediate, and returns an undefined instruction encoding. Second, the code incorrectly rejects some 32-bit immediates that are actually encodable as logical immediates. The root cause is that the code uses a default mask of 64-bit all-ones, even for 32-bit immediates. This causes an issue later on when the default mask is used to fill the top bits of the immediate with ones, shown here: /* * Pattern: 0..01..10..01..1 * * Fill the unused top bits with ones, and check if * the result is a valid immediate (all ones with a * contiguous ranges of zeroes). */ imm |= ~mask; if (!range_of_ones(~imm)) return AARCH64_BREAK_FAULT; To see the problem, consider an immediate of the form 0..01..10..01..1, where the upper 32 bits are zero, such as 0x80000001. The code checks if ~(imm | ~mask) contains a range of ones: the incorrect mask yields 1..10..01..10..0, which fails the check; the correct mask yields 0..01..10..0, which succeeds. The fix for both issues is to generate a correct mask based on the instruction immediate size, and use the mask to check for all-ones, all-zeroes, and values wider than the mask. Currently, arch/arm64/kvm/va_layout.c is the only user of this function, which uses 64-bit immediates and therefore won't trigger these bugs. We tested the new code against llvm-mc with all 1,302 encodable 32-bit logical immediates and all 5,334 encodable 64-bit logical immediates. Fixes: ef3935eeebff ("arm64: insn: Add encoder for bitwise operations using literals") Suggested-by: Will Deacon <will@kernel.org> Co-developed-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200508181547.24783-2-luke.r.nels@gmail.com Signed-off-by: Will Deacon <will@kernel.org>
2020-05-04arm64: insn: Report PAC and BTI instructions as skippableMark Brown1-0/+17
The PAC and BTI instructions can be safely skipped so report them as such, allowing them to be probed. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20200504131326.18290-5-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-05-04arm64: insn: Don't assume unrecognized HINTs are skippableMark Brown1-7/+3
Currently the kernel assumes that any HINT which it does not explicitly recognise is skippable. This is not robust as new instructions may be added which need special handling, and in any case software should only be using explicit NOP instructions for deliberate NOPs. This has the effect of rendering PAC and BTI instructions unprobeable which means that probes can't be inserted on the first instruction of functions built with those features. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20200504131326.18290-4-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-05-04arm64: insn: Provide a better name for aarch64_insn_is_nop()Mark Brown1-2/+1
The current aarch64_insn_is_nop() has exactly one caller which uses it solely to identify if the instruction is a HINT that can safely be stepped, requiring us to list things that aren't NOPs and make things more confusing than they need to be. Rename the function to reflect the actual usage and make things more clear. Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20200504131326.18290-3-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-05-04arm64: insn: Add constants for new HINT instruction decodeMark Brown1-1/+1
Add constants for decoding newer instructions defined in the HINT space. Since we are now decoding both the op2 and CRm fields rename the enum as well; this is compatible with what the existing users are doing. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20200504131326.18290-2-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2019-12-04arm64: insn: consistently handle exit textMark Rutland1-4/+18
A kernel built with KASAN && FTRACE_WITH_REGS && !MODULES, produces a boot-time splat in the bowels of ftrace: | [ 0.000000] ftrace: allocating 32281 entries in 127 pages | [ 0.000000] ------------[ cut here ]------------ | [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2019 ftrace_bug+0x27c/0x328 | [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-rc3-00008-g7f08ae53a7e3 #13 | [ 0.000000] Hardware name: linux,dummy-virt (DT) | [ 0.000000] pstate: 60000085 (nZCv daIf -PAN -UAO) | [ 0.000000] pc : ftrace_bug+0x27c/0x328 | [ 0.000000] lr : ftrace_init+0x640/0x6cc | [ 0.000000] sp : ffffa000120e7e00 | [ 0.000000] x29: ffffa000120e7e00 x28: ffff00006ac01b10 | [ 0.000000] x27: ffff00006ac898c0 x26: dfffa00000000000 | [ 0.000000] x25: ffffa000120ef290 x24: ffffa0001216df40 | [ 0.000000] x23: 000000000000018d x22: ffffa0001244c700 | [ 0.000000] x21: ffffa00011bf393c x20: ffff00006ac898c0 | [ 0.000000] x19: 00000000ffffffff x18: 0000000000001584 | [ 0.000000] x17: 0000000000001540 x16: 0000000000000007 | [ 0.000000] x15: 0000000000000000 x14: ffffa00010432770 | [ 0.000000] x13: ffff940002483519 x12: 1ffff40002483518 | [ 0.000000] x11: 1ffff40002483518 x10: ffff940002483518 | [ 0.000000] x9 : dfffa00000000000 x8 : 0000000000000001 | [ 0.000000] x7 : ffff940002483519 x6 : ffffa0001241a8c0 | [ 0.000000] x5 : ffff940002483519 x4 : ffff940002483519 | [ 0.000000] x3 : ffffa00011780870 x2 : 0000000000000001 | [ 0.000000] x1 : 1fffe0000d591318 x0 : 0000000000000000 | [ 0.000000] Call trace: | [ 0.000000] ftrace_bug+0x27c/0x328 | [ 0.000000] ftrace_init+0x640/0x6cc | [ 0.000000] start_kernel+0x27c/0x654 | [ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x30/0x60 with crng_init=0 | [ 0.000000] ---[ end trace 0000000000000000 ]--- | [ 0.000000] ftrace faulted on writing | [ 0.000000] [<ffffa00011bf393c>] _GLOBAL__sub_D_65535_0___tracepoint_initcall_level+0x4/0x28 | [ 0.000000] Initializing ftrace call sites | [ 0.000000] ftrace record flags: 0 | [ 0.000000] (0) | [ 0.000000] expected tramp: ffffa000100b3344 This is due to an unfortunate combination of several factors. Building with KASAN results in the compiler generating anonymous functions to register/unregister global variables against the shadow memory. These functions are placed in .text.startup/.text.exit, and given mangled names like _GLOBAL__sub_{I,D}_65535_0_$OTHER_SYMBOL. The kernel linker script places these in .init.text and .exit.text respectively, which are both discarded at runtime as part of initmem. Building with FTRACE_WITH_REGS uses -fpatchable-function-entry=2, which also instruments KASAN's anonymous functions. When these are discarded with the rest of initmem, ftrace removes dangling references to these call sites. Building without MODULES implicitly disables STRICT_MODULE_RWX, and causes arm64's patch_map() function to treat any !core_kernel_text() symbol as something that can be modified in-place. As core_kernel_text() is only true for .text and .init.text, with the latter depending on system_state < SYSTEM_RUNNING, we'll treat .exit.text as something that can be patched in-place. However, .exit.text is mapped read-only. Hence in this configuration the ftrace init code blows up while trying to patch one of the functions generated by KASAN. We could try to filter out the call sites in .exit.text rather than initializing them, but this would be inconsistent with how we handle .init.text, and requires hooking into core bits of ftrace. The behaviour of patch_map() is also inconsistent today, so instead let's clean that up and have it consistently handle .exit.text. This patch teaches patch_map() to handle .exit.text at init time, preventing the boot-time splat above. The flow of patch_map() is reworked to make the logic clearer and minimize redundant conditionality. Fixes: 3b23e4991fb66f6d ("arm64: implement ftrace with regs") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Amit Daniel Kachhap <amit.kachhap@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Torsten Duwe <duwe@suse.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-11-06arm64: insn: add encoder for MOV (register)Mark Rutland1-0/+13
For FTRACE_WITH_REGS, we're going to want to generate a MOV (register) instruction as part of the callsite intialization. As MOV (register) is an alias for ORR (shifted register), we can generate this with aarch64_insn_gen_logical_shifted_reg(), but it's somewhat verbose and difficult to read in-context. Add a aarch64_insn_gen_move_reg() wrapper for this case so that we can write callers in a more straightforward way. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Torsten Duwe <duwe@suse.de> Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com> Tested-by: Torsten Duwe <duwe@suse.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org>
2019-08-13arm64: constify aarch64_insn_encoding_class[]Mark Rutland1-1/+1
The aarch64_insn_encoding_class[] array contains compile-time constant data, and is never intentionally modified, so let's mark it as const. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-26bpf, arm64: use more scalable stadd over ldxr / stxr loop in xaddDaniel Borkmann1-0/+40
Since ARMv8.1 supplement introduced LSE atomic instructions back in 2016, lets add support for STADD and use that in favor of LDXR / STXR loop for the XADD mapping if available. STADD is encoded as an alias for LDADD with XZR as the destination register, therefore add LDADD to the instruction encoder along with STADD as special case and use it in the JIT for CPUs that advertise LSE atomics in CPUID register. If immediate offset in the BPF XADD insn is 0, then use dst register directly instead of temporary one. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-27arm64/insn: add support for emitting ADR/ADRP instructionsArd Biesheuvel1-0/+29
Add support for emitting ADR and ADRP instructions so we can switch over our PLT generation code in a subsequent patch. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-07-05arm64: insn: Don't fallback on nosync path for general insn patchingWill Deacon1-55/+1
Patching kernel instructions at runtime requires other CPUs to undergo a context synchronisation event via an explicit ISB or an IPI in order to ensure that the new instructions are visible. This is required even for "hotpatch" instructions such as NOP and BL, so avoid optimising in this case and always go via stop_machine() when performing general patching. ftrace isn't quite as strict, so it can continue to call the nosync code directly. Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-07-05arm64: IPI each CPU after invalidating the I-cache for kernel mappingsWill Deacon1-14/+4
When invalidating the instruction cache for a kernel mapping via flush_icache_range(), it is also necessary to flush the pipeline for other CPUs so that instructions fetched into the pipeline before the I-cache invalidation are discarded. For example, if module 'foo' is unloaded and then module 'bar' is loaded into the same area of memory, a CPU could end up executing instructions from 'foo' when branching into 'bar' if these instructions were fetched into the pipeline before 'foo' was unloaded. Whilst this is highly unlikely to occur in practice, particularly as any exception acts as a context-synchronizing operation, following the letter of the architecture requires us to execute an ISB on each CPU in order for the new instruction stream to be visible. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-19arm64: insn: Allow ADD/SUB (immediate) with LSL #12Marc Zyngier1-2/+16
The encoder for ADD/SUB (immediate) can only cope with 12bit immediates, while there is an encoding for a 12bit immediate shifted by 12 bits to the left. Let's fix this small oversight by allowing the LSL_12 bit to be set. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19arm64; insn: Add encoder for the EXTR instructionMarc Zyngier1-0/+32
Add an encoder for the EXTR instruction, which also implements the ROR variant (where Rn == Rm). Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19arm64: insn: Add encoder for bitwise operations using literalsMarc Zyngier1-0/+136
We lack a way to encode operations such as AND, ORR, EOR that take an immediate value. Doing so is quite involved, and is all about reverse engineering the decoding algorithm described in the pseudocode function DecodeBitMasks(). This has been tested by feeding it all the possible literal values and comparing the output with that of GAS. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19arm64: insn: Add N immediate encodingMarc Zyngier1-0/+4
We're missing the a way to generate the encoding of the N immediate, which is only a single bit used in a number of instruction that take an immediate. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-07-05Merge tag 'arm64-upstream' of ↵Linus Torvalds1-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: - RAS reporting via GHES/APEI (ACPI) - Indirect ftrace trampolines for modules - Improvements to kernel fault reporting - Page poisoning - Sigframe cleanups and preparation for SVE context - Core dump fixes - Sparse fixes (mainly relating to endianness) - xgene SoC PMU v3 driver - Misc cleanups and non-critical fixes * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (75 commits) arm64: fix endianness annotation for 'struct jit_ctx' and friends arm64: cpuinfo: constify attribute_group structures. arm64: ptrace: Fix incorrect get_user() use in compat_vfp_set() arm64: ptrace: Remove redundant overrun check from compat_vfp_set() arm64: ptrace: Avoid setting compat FP[SC]R to garbage if get_user fails arm64: fix endianness annotation for __apply_alternatives()/get_alt_insn() arm64: fix endianness annotation in get_kaslr_seed() arm64: add missing conversion to __wsum in ip_fast_csum() arm64: fix endianness annotation in acpi_parking_protocol.c arm64: use readq() instead of readl() to read 64bit entry_point arm64: fix endianness annotation for reloc_insn_movw() & reloc_insn_imm() arm64: fix endianness annotation for aarch64_insn_write() arm64: fix endianness annotation in aarch64_insn_read() arm64: fix endianness annotation in call_undef_hook() arm64: fix endianness annotation for debug-monitors.c ras: mark stub functions as 'inline' arm64: pass endianness info to sparse arm64: ftrace: fix !CONFIG_ARM64_MODULE_PLTS kernels arm64: signal: Allow expansion of the signal frame acpi: apei: check for pending errors when probing GHES entries ...
2017-06-29arm64: fix endianness annotation for aarch64_insn_write()Luc Van Oostenryck1-3/+2
aarch64_insn_write() is used to write an instruction. As on ARM64 in-memory instructions are always stored in little-endian order, this function, taking the instruction opcode in native order, correctly convert it to little-endian before sending it to an helper function __aarch64_insn_write() which will do the effective write. This is all good, but the variable and argument holding the converted value are not annotated for a little-endian value but left for native values. Fix this by adjusting the prototype of the helper and directly using the result of cpu_to_le32() without passing by an intermediate variable (which was not a distinct one but the same as the one holding the native value). Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-06-29arm64: fix endianness annotation in aarch64_insn_read()Luc Van Oostenryck1-1/+1
The function arch64_insn_read() is used to read an instruction. On AM64 instructions are always stored in little-endian order and thus the function correctly do a little-to-native endian conversion to the value just read. However, the variable used to hold the value before the conversion is not declared for a little-endian value but for a native one. Fix this by using the correct type for the declaration: __le32 Note: This only works because the function reading the value, probe_kernel_read((), takes a void pointer and void pointers are endian-agnostic. Otherwise probe_kernel_read() should also be properly annotated (or worse, need to be specialized). Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-05-26arm64: Prevent cpu hotplug rwsem recursionThomas Gleixner1-2/+3
The text patching functions which are invoked from jump_label and kprobes code are protected against cpu hotplug at the call sites. Use stop_machine_cpuslocked() to avoid recursion on the cpu hotplug rwsem. stop_machine_cpuslocked() contains a lockdep assertion to catch any unprotected callers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20170524081549.197070135@linutronix.de
2017-05-02bpf, arm64: implement jiting of BPF_XADDDaniel Borkmann1-0/+106
This work adds BPF_XADD for BPF_W/BPF_DW to the arm64 JIT and therefore completes JITing of all BPF instructions, meaning we can thus also remove the 'notyet' label and do not need to fall back to the interpreter when BPF_XADD is used in a program! This now also brings arm64 JIT in line with x86_64, s390x, ppc64, sparc64, where all current eBPF features are supported. BPF_W example from test_bpf: .u.insns_int = { BPF_ALU32_IMM(BPF_MOV, R0, 0x12), BPF_ST_MEM(BPF_W, R10, -40, 0x10), BPF_STX_XADD(BPF_W, R10, R0, -40), BPF_LDX_MEM(BPF_W, R0, R10, -40), BPF_EXIT_INSN(), }, [...] 00000020: 52800247 mov w7, #0x12 // #18 00000024: 928004eb mov x11, #0xffffffffffffffd8 // #-40 00000028: d280020a mov x10, #0x10 // #16 0000002c: b82b6b2a str w10, [x25,x11] // start of xadd mapping: 00000030: 928004ea mov x10, #0xffffffffffffffd8 // #-40 00000034: 8b19014a add x10, x10, x25 00000038: f9800151 prfm pstl1strm, [x10] 0000003c: 885f7d4b ldxr w11, [x10] 00000040: 0b07016b add w11, w11, w7 00000044: 880b7d4b stxr w11, w11, [x10] 00000048: 35ffffab cbnz w11, 0x0000003c // end of xadd mapping: [...] BPF_DW example from test_bpf: .u.insns_int = { BPF_ALU32_IMM(BPF_MOV, R0, 0x12), BPF_ST_MEM(BPF_DW, R10, -40, 0x10), BPF_STX_XADD(BPF_DW, R10, R0, -40), BPF_LDX_MEM(BPF_DW, R0, R10, -40), BPF_EXIT_INSN(), }, [...] 00000020: 52800247 mov w7, #0x12 // #18 00000024: 928004eb mov x11, #0xffffffffffffffd8 // #-40 00000028: d280020a mov x10, #0x10 // #16 0000002c: f82b6b2a str x10, [x25,x11] // start of xadd mapping: 00000030: 928004ea mov x10, #0xffffffffffffffd8 // #-40 00000034: 8b19014a add x10, x10, x25 00000038: f9800151 prfm pstl1strm, [x10] 0000003c: c85f7d4b ldxr x11, [x10] 00000040: 8b07016b add x11, x11, x7 00000044: c80b7d4b stxr w11, x11, [x10] 00000048: 35ffffab cbnz w11, 0x0000003c // end of xadd mapping: [...] Tested on Cavium ThunderX ARMv8, test suite results after the patch: No JIT: [ 3751.855362] test_bpf: Summary: 311 PASSED, 0 FAILED, [0/303 JIT'ed] With JIT: [ 3573.759527] test_bpf: Summary: 311 PASSED, 0 FAILED, [303/303 JIT'ed] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-27kprobes: move kprobe declarations to asm-generic/kprobes.hLuis R. Rodriguez1-0/+1
Often all is needed is these small helpers, instead of compiler.h or a full kprobes.h. This is important for asm helpers, in fact even some asm/kprobes.h make use of these helpers... instead just keep a generic asm file with helpers useful for asm code with the least amount of clutter as possible. Likewise we need now to also address what to do about this file for both when architectures have CONFIG_HAVE_KPROBES, and when they do not. Then for when architectures have CONFIG_HAVE_KPROBES but have disabled CONFIG_KPROBES. Right now most asm/kprobes.h do not have guards against CONFIG_KPROBES, this means most architecture code cannot include asm/kprobes.h safely. Correct this and add guards for architectures missing them. Additionally provide architectures that not have kprobes support with the default asm-generic solution. This lets us force asm/kprobes.h on the header include/linux/kprobes.h always, but most importantly we can now safely include just asm/kprobes.h on architecture code without bringing the full kitchen sink of header files. Two architectures already provided a guard against CONFIG_KPROBES on its kprobes.h: sh, arch. The rest of the architectures needed gaurds added. We avoid including any not-needed headers on asm/kprobes.h unless kprobes have been enabled. In a subsequent atomic change we can try now to remove compiler.h from include/linux/kprobes.h. During this sweep I've also identified a few architectures defining a common macro needed for both kprobes and ftrace, that of the definition of the breakput instruction up. Some refer to this as BREAKPOINT_INSTRUCTION. This must be kept outside of the #ifdef CONFIG_KPROBES guard. [mcgrof@kernel.org: fix arm64 build] Link: http://lkml.kernel.org/r/CAB=NE6X1WMByuARS4mZ1g9+W=LuVBnMDnh_5zyN0CLADaVh=Jw@mail.gmail.com [sfr@canb.auug.org.au: fixup for kprobes declarations moving] Link: http://lkml.kernel.org/r/20170214165933.13ebd4f4@canb.auug.org.au Link: http://lkml.kernel.org/r/20170203233139.32682-1-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22Merge tag 'arm64-upstream' of ↵Linus Torvalds1-1/+30
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: - Errata workarounds for Qualcomm's Falkor CPU - Qualcomm L2 Cache PMU driver - Qualcomm SMCCC firmware quirk - Support for DEBUG_VIRTUAL - CPU feature detection for userspace via MRS emulation - Preliminary work for the Statistical Profiling Extension - Misc cleanups and non-critical fixes * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (74 commits) arm64/kprobes: consistently handle MRS/MSR with XZR arm64: cpufeature: correctly handle MRS to XZR arm64: traps: correctly handle MRS/MSR with XZR arm64: ptrace: add XZR-safe regs accessors arm64: include asm/assembler.h in entry-ftrace.S arm64: fix warning about swapper_pg_dir overflow arm64: Work around Falkor erratum 1003 arm64: head.S: Enable EL1 (host) access to SPE when entered at EL2 arm64: arch_timer: document Hisilicon erratum 161010101 arm64: use is_vmalloc_addr arm64: use linux/sizes.h for constants arm64: uaccess: consistently check object sizes perf: add qcom l2 cache perf events driver arm64: remove wrong CONFIG_PROC_SYSCTL ifdef ARM: smccc: Update HVC comment to describe new quirk parameter arm64: do not trace atomic operations ACPI/IORT: Fix the error return code in iort_add_smmu_platform_device() ACPI/IORT: Fix iort_node_get_id() mapping entries indexing arm64: mm: enable CONFIG_HOLES_IN_ZONE for NUMA perf: xgene: Include module.h ...
2017-02-07arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONXLaura Abbott1-1/+1
Both of these options are poorly named. The features they provide are necessary for system security and should not be considered debug only. Change the names to CONFIG_STRICT_KERNEL_RWX and CONFIG_STRICT_MODULE_RWX to better describe what these options do. Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Jessica Yu <jeyu@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-01-12arm64: Use __pa_symbol for kernel symbolsLaura Abbott1-1/+1
__pa_symbol is technically the marcro that should be used for kernel symbols. Switch to this as a pre-requisite for DEBUG_VIRTUAL which will do bounds checking. Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-01-10arm64: Add helper to decode register from instructionSuzuki K Poulose1-0/+29
Add a helper to extract the register field from a given instruction. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-12-02arm64: Get rid of asm/opcodes.hMarc Zyngier1-1/+0
The opcodes.h drags in a lot of definition from the 32bit port, most of which is not required at all. Clean things up a bit by moving the bare minimum of what is required next to the actual users, and drop the include file. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-09-09arm64: insn: Add helpers for adrp offsetsSuzuki K Poulose1-0/+13
Adds helpers for decoding/encoding the PC relative addresses for adrp. This will be used for handling dynamic patching of 'adrp' instructions in alternative code patching. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-08-26arm64: always enable DEBUG_RODATA and remove the Kconfig optionMark Rutland1-1/+1
Follow the example set by x86 in commit 9ccaf77cf05915f5 ("x86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig option"), and make these protections a fundamental security feature rather than an opt-in. This also results in a minor code simplification. For those rare cases when users wish to disable this protection (e.g. for debugging), this can be done by passing 'rodata=off' on the command line. As DEBUG_RODATA_ALIGN is only intended to address a performance/memory tradeoff, and does not affect correctness, this is left user-selectable. DEBUG_MODULE_RONX is also left user-selectable until the core code provides a boot-time option to disable the protection for debugging use-cases. Cc: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-07-19arm64: kprobes instruction simulation supportSandeepa Prabhu1-0/+1
Kprobes needs simulation of instructions that cannot be stepped from a different memory location, e.g.: those instructions that uses PC-relative addressing. In simulation, the behaviour of the instruction is implemented using a copy of pt_regs. The following instruction categories are simulated: - All branching instructions(conditional, register, and immediate) - Literal access instructions(load-literal, adr/adrp) Conditional execution is limited to branching instructions in ARM v8. If conditions at PSTATE do not match the condition fields of opcode, the instruction is effectively NOP. Thanks to Will Cohen for assorted suggested changes. Signed-off-by: Sandeepa Prabhu <sandeepa.s.prabhu@gmail.com> Signed-off-by: William Cohen <wcohen@redhat.com> Signed-off-by: David A. Long <dave.long@linaro.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> [catalin.marinas@arm.com: removed linux/module.h include] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-19arm64: add conditional instruction simulation supportDavid A. Long1-0/+98
Cease using the arm32 arm_check_condition() function and replace it with a local version for use in deprecated instruction support on arm64. Also make the function table used by this available for future use by kprobes and/or uprobes. This function is derived from code written by Sandeepa Prabhu. Signed-off-by: Sandeepa Prabhu <sandeepa.s.prabhu@gmail.com> Signed-off-by: David A. Long <dave.long@linaro.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-19arm64: Add more test functions to insn.cDavid A. Long1-0/+34
Certain instructions are hard to execute correctly out-of-line (as in kprobes). Test functions are added to insn.[hc] to identify these. The instructions include any that use PC-relative addressing, change the PC, or change interrupt masking. For efficiency and simplicity test functions are also added for small collections of related instructions. Signed-off-by: David A. Long <dave.long@linaro.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-04-14arm64: insn: avoid virt_to_page() translations on core kernel symbolsArd Biesheuvel1-1/+1
Before restricting virt_to_page() to the linear mapping, ensure that the text patching code does not use it to resolve references into the core kernel text, which is mapped in the vmalloc area. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-17arm64: insn: remove BUG_ON from codegenZi Shen Lim1-53/+112
During code generation, we used to BUG_ON unknown/unsupported encoding or invalid parameters. Instead, now we report these as errors and simply return the instruction AARCH64_BREAK_FAULT. Users of these codegen helpers should check for and handle this failure condition as appropriate. Otherwise, unhandled codegen failure will result in trapping at run-time due to AARCH64_BREAK_FAULT, which is arguably better than a BUG_ON. Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05arm64: convert patch_lock to raw lockYang Shi1-3/+3
When running kprobe test on arm64 rt kernel, it reports the below warning: root@qemu7:~# modprobe kprobe_example BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917 in_atomic(): 0, irqs_disabled(): 128, pid: 484, name: modprobe CPU: 0 PID: 484 Comm: modprobe Not tainted 4.1.6-rt5 #2 Hardware name: linux,dummy-virt (DT) Call trace: [<ffffffc0000891b8>] dump_backtrace+0x0/0x128 [<ffffffc000089300>] show_stack+0x20/0x30 [<ffffffc00061dae8>] dump_stack+0x1c/0x28 [<ffffffc0000bbad0>] ___might_sleep+0x120/0x198 [<ffffffc0006223e8>] rt_spin_lock+0x28/0x40 [<ffffffc000622b30>] __aarch64_insn_write+0x28/0x78 [<ffffffc000622e48>] aarch64_insn_patch_text_nosync+0x18/0x48 [<ffffffc000622ee8>] aarch64_insn_patch_text_cb+0x70/0xa0 [<ffffffc000622f40>] aarch64_insn_patch_text_sync+0x28/0x48 [<ffffffc0006236e0>] arch_arm_kprobe+0x38/0x48 [<ffffffc00010e6f4>] arm_kprobe+0x34/0x50 [<ffffffc000110374>] register_kprobe+0x4cc/0x5b8 [<ffffffbffc002038>] kprobe_init+0x38/0x7c [kprobe_example] [<ffffffc000084240>] do_one_initcall+0x90/0x1b0 [<ffffffc00061c498>] do_init_module+0x6c/0x1cc [<ffffffc0000fd0c0>] load_module+0x17f8/0x1db0 [<ffffffc0000fd8cc>] SyS_finit_module+0xb4/0xc8 Convert patch_lock to raw loc kto avoid this issue. Although the problem is found on rt kernel, the fix should be applicable to mainline kernel too. Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-07-27arm64: insn: use set_fixmap_offset to make it more clearyalin wang1-3/+2
A little change to patch_map() function, use set_fixmap_offset() to make code more clear. Signed-off-by: yalin wang <yalin.wang2010@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-06-03arm64: insn: Add aarch64_{get,set}_branch_offsetMarc Zyngier1-0/+60
In order to deal with branches located in alternate sequences, but pointing to the main kernel text, it is required to extract the relative displacement encoded in the instruction, and to be able to update said instruction with a new offset (once it is known). For this, we introduce three new helpers: - aarch64_insn_is_branch_imm is a predicate indicating if the instruction is an immediate branch - aarch64_get_branch_offset returns a signed value representing the byte offset encoded in a branch instruction - aarch64_set_branch_offset takes an instruction and an offset, and returns the corresponding updated instruction. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-03-30arm64: insn: Add aarch64_insn_decode_immediateMarc Zyngier1-16/+65
Patching an instruction sometimes requires extracting the immediate field from this instruction. To facilitate this, and avoid potential duplication of code, add aarch64_insn_decode_immediate as the reciprocal to aarch64_insn_encode_immediate. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-02-26arm64: Fix text patching logic when using fixmapMarc Zyngier1-1/+3
Patch 2f896d586610 ("arm64: use fixmap for text patching") changed the way we patch the kernel text, using a fixmap when the kernel or modules are flagged as read only. Unfortunately, a flaw in the logic makes it fall over when patching modules without CONFIG_DEBUG_SET_MODULE_RONX enabled: [...] [ 32.032636] Call trace: [ 32.032716] [<fffffe00003da0dc>] __copy_to_user+0x2c/0x60 [ 32.032837] [<fffffe0000099f08>] __aarch64_insn_write+0x94/0xf8 [ 32.033027] [<fffffe000009a0a0>] aarch64_insn_patch_text_nosync+0x18/0x58 [ 32.033200] [<fffffe000009c3ec>] ftrace_modify_code+0x58/0x84 [ 32.033363] [<fffffe000009c4e4>] ftrace_make_nop+0x3c/0x58 [ 32.033532] [<fffffe0000164420>] ftrace_process_locs+0x3d0/0x5c8 [ 32.033709] [<fffffe00001661cc>] ftrace_module_init+0x28/0x34 [ 32.033882] [<fffffe0000135148>] load_module+0xbb8/0xfc4 [ 32.034044] [<fffffe0000135714>] SyS_finit_module+0x94/0xc4 [...] This is triggered by the use of virt_to_page() on a module address, which ends to pointing to Nowhereland if you're lucky, or corrupt your precious data if not. This patch fixes the logic by mimicking what is done on arm: - If we're patching a module and CONFIG_DEBUG_SET_MODULE_RONX is set, use vmalloc_to_page(). - If we're patching the kernel and CONFIG_DEBUG_RODATA is set, use virt_to_page(). - Otherwise, use the provided address, as we can write to it directly. Tested on 4.0-rc1 as a KVM guest. Reported-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Laura Abbott <lauraa@codeaurora.org> Tested-by: Richard W.M. Jones <rjones@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-01-22arm64: use fixmap for text patchingLaura Abbott1-1/+46
When kernel text is marked as read only, it cannot be modified directly. Use a fixmap to modify the text instead in a similar manner to x86 and arm. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-12-09Merge tag 'arm64-upstream' of ↵Linus Torvalds1-0/+26
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "Here's the usual mixed bag of arm64 updates, also including some related EFI changes (Acked by Matt) and the MMU gather range cleanup (Acked by you). Changes include: - support for alternative instruction patching from Andre - seccomp from Akashi - some AArch32 instruction emulation, required by the Android folks - optimisations for exception entry/exit code, cmpxchg, pcpu atomics - mmu_gather range calculations moved into core code - EFI updates from Ard, including long-awaited SMBIOS support - /proc/cpuinfo fixes to align with the format used by arch/arm/ - a few non-critical fixes across the architecture" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (70 commits) arm64: remove the unnecessary arm64_swiotlb_init() arm64: add module support for alternatives fixups arm64: perf: Prevent wraparound during overflow arm64/include/asm: Fixed a warning about 'struct pt_regs' arm64: Provide a namespace to NCAPS arm64: bpf: lift restriction on last instruction arm64: Implement support for read-mostly sections arm64: compat: align cacheflush syscall with arch/arm arm64: add seccomp support arm64: add SIGSYS siginfo for compat task arm64: add seccomp syscall for compat task asm-generic: add generic seccomp.h for secure computing mode 1 arm64: ptrace: allow tracer to skip a system call arm64: ptrace: add NT_ARM_SYSTEM_CALL regset arm64: Move some head.text functions to executable section arm64: jump labels: NOP out NOP -> NOP replacement arm64: add support to dump the kernel page tables arm64: Add FIX_HOLE to permanent fixed addresses arm64: alternatives: fix pr_fmt string for consistency arm64: vmlinux.lds.S: don't discard .exit.* sections at link-time ...
2014-11-20arm64: Emulate CP15 Barrier instructionsPunit Agrawal1-0/+13
The CP15 barrier instructions (CP15ISB, CP15DSB and CP15DMB) are deprecated in the ARMv7 architecture, superseded by ISB, DSB and DMB instructions respectively. Some implementations may provide the ability to disable the CP15 barriers by disabling the CP15BEN bit in SCTLR_EL1. If not enabled, the encodings for these instructions become undefined. To support legacy software using these instructions, this patch register hooks to - * emulate CP15 barriers and warn the user about their use * toggle CP15BEN in SCTLR_EL1 Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-23 21:46:37 +0000