summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/pxa25x.c
AgeCommit message (Collapse)AuthorFilesLines
2022-05-07ARM: pxa: move mach/*.h to mach-pxa/Arnd Bergmann1-3/+3
None of the headers are included from outside of the mach-pxa directory, so move them all in there. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-19ARM: pxa: make addr-map.h header localArnd Bergmann1-1/+1
Drivers should not rely on the contents of this file, so move it into the platform directory directly. Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/lkml/87mudkmx8g.fsf@belgarion.home/
2022-04-19watchdog: sa1100: use platform device registrationArnd Bergmann1-1/+1
Rather than relying on machine specific headers to pass down the reboot status and the register locations, use resources and platform_data. Aside from this, keep the changes to a minimum. Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: linux-watchdog@vger.kernel.org Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-19ARM: pxa: split up mach/hardware.hArnd Bergmann1-1/+2
The mach/hardware.h is included in lots of places, and it provides three different things on pxa: - the cpu_is_pxa* macros - an indirect inclusion of mach/addr-map.h - the __REG() and io_pv2() helper macros Split it up into separate <linux/soc/pxa/cpu.h> and mach/pxa-regs.h headers, then change all the files that use mach/hardware.h to include the exact set of those three headers that they actually need, allowing for further more targeted cleanup. linux/soc/pxa/cpu.h can remain permanently exported and is now in a global location along with similar headers. pxa-regs.h and addr-map.h are only used in a very small number of drivers now and can be moved to arch/arm/mach-pxa/ directly when those drivers are to pass the necessary data as resources. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-leds@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: linux-rtc@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-19ARM: pxa: remove mach/dma.hArnd Bergmann1-1/+0
The file no longer contains anything useful, so remove it. Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-18ARM: pxa: add dma slave mapRobert Jarzmik1-1/+37
In order to remove the specific knowledge of the dma mapping from PXA drivers, add a default slave map for pxa architectures. This is the first step, and once all drivers are converted, pxad_filter_fn() will be made static, and the DMA resources removed from device.c. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reported-by: Arnd Bergmann <arnd@arndb.de>
2017-02-28ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbolFlorian Fainelli1-1/+1
All low-level PM/SMP code using virt_to_phys() should actually use __pa_symbol() against kernel symbols. Update code where relevant to move away from virt_to_phys(). Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-11-05ARM: pxa: fix pxa25x interrupt initRobert Jarzmik1-1/+1
In the device-tree case, the root interrupt controller cannot be accessed through the 6th coprocessor, contrary to pxa27x and pxa3xx architectures. Fix it to behave as in non-devicetree builds. Fixes: 32f17997c130 ("ARM: pxa: remove irq init from dt machines") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-09-09ARM: pxa: remove irq init from dt machinesRobert Jarzmik1-3/+8
The init_irq and handle_irq can be declared through standard irqchip declaration and are not necessary in machine descriptions. This is another step towards the generic kernel for the pxa architecture. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Arnd Bergmann <arnd@arndb.de>
2016-08-09ARM: pxa: add pxa25x device-tree supportRobert Jarzmik1-6/+6
Add a device-tree machine entry (DT_MACHINE_START) for pxa25x based platforms. Take the opportunity to sort the file machine descriptions by alphabetical order. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-08-09ARM: pxa: prepare pxa25x interrupts for device-tree platformsRobert Jarzmik1-0/+6
Add the device-tree interrupts initialization function required to have a generic pxa25x device-tree machine. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-08-09ARM: pxa: remove platform dma codeRobert Jarzmik1-3/+0
As the last pxa related driver was converted to dmaengine, it's time to kill the legacy dma code, which is not used anymore. This finishes the pxa dmaengine transition. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-26ARM: pxa: add the number of DMA requestor linesRobert Jarzmik1-1/+1
Declare the number of DMA requestor lines per platform : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines This information will be used to activate the DMA flow control or not. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-12-01ARM: pxa: make more mach/*.h files localArnd Bergmann1-2/+2
Lots of header files are never included outside of a mach-pxa directory and do not need to be made visible in include/mach, so let's just move them all down one level. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-07-18ARM: pxa: transition to dmaengine phase 1Robert Jarzmik1-0/+1
In order to slowly transition pxa to dmaengine, the legacy code will now rely on dmaengine to request a channel. This implies that PXA architecture selects DMADEVICES and PXA_DMA, which is not pretty. Yet it enables PXA drivers to be ported one by one, with part of them using dmaengine, and the other part using the legacy code. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-05-12ARM: pxa: Transition pxa25x, pxa27x, pxa3xx to clk frameworkRobert Jarzmik1-1/+0
Transition the PXA25x, PXA27x and PXA3xx CPUs to the clock framework. This transition still enables legacy platforms to run without device tree as before, ie relying on platform data encoded in board specific files. This is the last step of clock framework transition for pxa platforms. It was tested on lubbock (pxa25x), mioa701 (pxa27x) and zylonite (pxa3xx). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-05-12ARM: pxa: Transition pxa25x and pxa27x to clk frameworkRobert Jarzmik1-182/+0
Transition the PXA25x and PXA27x CPUs to the clock framework. This transition still enables legacy platforms to run without device tree as before, ie relying on platform data encoded in board specific files. The transition breaks the previous clocks activation of pin control (gpio11 and gpio12). Machine files should be amended to take that into account. This is the last step of clock framework transition for pxa25x and pxa27x, leaving only pxa3xx for further work. Reviewed-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2014-07-12ARM: pxa: Move UNCACHED_PHYS_0 mapping from generic.c to pxa2[57]x.cLaurent Pinchart1-0/+5
The UNCACHED_PHYS_0 mapping is only needed on PXA25x and PXA27x platforms. Move it to pxa25x.c and pxa27x.c to avoid wasting vmalloc space on PXA3xx. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-12ARM: pxa: Don't hardcode addresses and size in map_desc tablesLaurent Pinchart1-1/+1
The virtual address, physical address and size of all regions for which we create static mappings are defined in PXA headers. Replaced the hardcoded values with macros. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-11ARM: pxa: move PXA_GPIO_TO_IRQ macroHaojian Zhuang1-1/+2
Since PXA_GPIO_TO_IRQ() & MMP_GPIO_TO_IRQ() macro are depended on arch code, move them from gpio driver to platform driver instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-11ARM: pxa: remove cpu_is_xxx in gpio driverHaojian Zhuang1-2/+6
Avoid to use cpu_is_xxx() in pxa gpio driver. Use platform_device_id to identify the difference. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-23ARM: pxa: add dummy SA1100 rtc clock in pxa25xAndrea Adami1-0/+1
* fix failure seen on Zaurus corgi: * sa1100-rtc sa1100-rtc: failed to find rtc clock source * sa1100-rtc: probe of sa1100-rtc failed with error -2 Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-11-21ARM: pxa: fix pxa25x gpio wakeup settingAndrea Adami1-0/+5
* Since 3.3 gpio wakeup is broken on pxa25x (tested on corgi and poodle). * Use gpio_set_wake like done for pxa27x with commit id * b95ace54a23e2f8ebb032744cebb17c9f43bf651 Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-03-06ARM: pxa: remove duplicated registeration on pxa-gpioHaojian Zhuang1-1/+0
Both reboot (via reboot(RB_AUTOBOOT)) and suspend freeze on hx4700. Registration of pxa_gpio_syscore_ops is moved into pxa-gpio driver, but it still exists in arch-pxa directory. It resulsts failure on reboot and suspend. Now remove the registration code in arch-pxa. Reported-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-03-06ARM: pxa: add dummy clock for pxa25x and pxa27xHaojian Zhuang1-0/+1
gpio-pxa driver is shared among arch-pxa and arch-mmp. Clock is the essential component on pxa3xx/pxa95x and arch-mmp. So we need to define dummy clock in pxa25x/pxa27x instead. This regression was introduced by the commit "ARM: pxa: add dummy clock for sa1100-rtc", id a55b5adaf403c4d032e0871ad4ee3367782f4db6. Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2012-02-16arch/arm/mach-pxa/: included linux/gpio.h twiceDanny Kukawka1-1/+0
arch/arm/mach-pxa/pxa25x.c and arch/arm/mach-pxa/saarb.c included 'linux/gpio.h' twice, remove the duplicates. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-01-19Revert "ARM: pxa: add dummy clock for sa1100-rtc"Russell King1-2/+0
This reverts commit 7557c175f60d8d40baf16b22caf79beadef8f081. This revert is necessary to revert the broken "RTC: sa1100: support sa1100, pxa and mmp soc families" change.
2011-12-28Merge branch 'drivers/rtc-sa1100' into next/driversArnd Bergmann1-0/+1
* drivers/rtc-sa1100: ARM: sa1100: clean up of the clock support ARM: pxa: add dummy clock for sa1100-rtc RTC: sa1100: support sa1100, pxa and mmp soc families RTC: sa1100: remove redundant code of setting alarm RTC: sa1100: Clean out ost register Conflicts: arch/arm/mach-pxa/pxa25x.c arch/arm/mach-pxa/pxa27x.c
2011-12-28ARM: pxa: add dummy clock for sa1100-rtcJett.Zhou1-0/+2
Now sa1100-rtc can support sa1100/pxa/mmp soc series, then we need add dummy clock for sa1100-rtc. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-11-15ARM: pxa: add clk support in gpio driverHaojian Zhuang1-0/+1
Support clk in gpio driver. There's no gpio clock in PXA25x and PXA27x. So use dummy clk instead. And move the gpio edge initialization into gpio driver for arch-mmp. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-15ARM: pxa: change gpio to platform deviceHaojian Zhuang1-2/+1
Remove most gpio macros and change gpio driver to platform driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-14ARM: pxa: rename gpio_to_irq and irq_to_gpioHaojian Zhuang1-1/+1
Avoid to define gpio_to_irq() and irq_to_gpio() for potential name confliction since multiple architecture will be built together. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-10-31Merge branch 'depends/rmk/gpio' into next/fixesArnd Bergmann1-1/+2
This sorts out merge conflicts with the arm/gpio branch that already got merged into mainline Linux. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-08ARM: pxa: use correct __iomem annotationsArnd Bergmann1-1/+1
This tries to clear up the confusion between integers and iomem pointers in the marvell pxa platform. MMIO addresses are supposed to be __iomem* values, in order to let the Linux type checking work correctly. This patch moves the cast to __iomem as far back as possible, to the place where the MMIO virtual address windows are defined. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-10-01ARM: 7104/1: plat-pxa: break out GPIO driver specificsLinus Walleij1-0/+1
The <mach/gpio.h> file is included from upper directories and deal with generic GPIO and gpiolib stuff. Break out the platform and driver specific defines and functions into its own header file. Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-08ARM: gpio: convert includes of mach/gpio.h and asm/gpio.h to linux/gpio.hRussell King1-1/+1
Convert arch/arm includes of mach/gpio.h and asm/gpio.h to linux/gpio.h before we start consolidating the individual platform implementations of the gpio header files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-24ARM: pm: hide 1st and 2nd arguments to cpu_suspend from platform codeRussell King1-2/+2
The first and second arguments shouldn't concern platform code, so hide them from each platforms caller. Tested-by: Kevin Hilman <khilman@ti.com> Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-24ARM: pm: pxa: move cpu_suspend into C codeRussell King1-1/+2
We don't need a veneer for cpu_suspend, it can be called directly from C code now. Move it into the PXA CPU suspend functions, along with the accumulator register saving/restoring. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-24ARM / PXA: Use struct syscore_ops for "core" power managementRafael J. Wysocki1-19/+6
Replace sysdev classes and struct sys_device objects used for "core" power management by the PXA platform code with struct syscore_ops objects that are simpler. This reduces the code size and the kernel memory footprint. It also is necessary for removing sysdevs entirely from the kernel in the future. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13ARM: pxa: convert incorrect IRQ_TO_IRQ() to irq_to_gpio()Eric Miao1-1/+1
This fixes the failure to register the IRQ_RTCAlrm alarm as a wakeup event. It is misinterpreted as a gpio irq not a PWER bitmask. Fixed this by converting the incorrect IRQ_TO_IRQ() to a correct version of irq_to_gpio(). Reported-by: Nick Bane <nickbane1@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-03-16Merge branches 'at91', 'ep93xx', 'errata', 'footbridge', 'fncpy', 'gemini', ↵Russell King1-2/+3
'irqdata', 'pm', 'sh', 'smp', 'spear', 'ux500' and 'via' into devel
2011-02-27ARM: pxa: enable pxa-pcm-audio on pxa210/pxa25x platformDmitry Eremin-Solenikov1-0/+1
pxa25x platforms were left out of major ASoC Update patch. Since f0fba2ad1b a registration of pxa-pcm-audio device is required for ASoC to function on pxa platforms. Register one also for pxa210/pxa25x. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-02-22ARM: pm: convert PXA to generic suspend/resume supportRussell King1-2/+2
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-13ARM: PXA SoCs: irq_data conversion.Lennert Buytenhek1-3/+4
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
2010-12-16ARM: pxa: introduce pxa2xx_clock_sysclass for clock suspend/resumeEric Miao1-4/+3
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-16ARM: pxa: remove get_memclk_frequency_10khz()Eric Miao1-10/+10
Introduce 'struct clk' for memory and remove get_memclk_frequency_10khz(). Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-16ARM: pxa: separate the clock support into clock-{pxa2xx,pxa3xx}.cEric Miao1-20/+21
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-16ARM: pxa: Access SMEMC via virtual addressesMarek Vasut1-2/+3
This is important because on PXA3xx, the physical mapping of SMEMC registers differs from the one on PXA2xx. In order to get PCMCIA working on both PXA2xx and PXA320, the PCMCIA driver was adjusted accordingly as well. Also, various places in the kernel had to be patched to use __raw_read/__raw_write. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-16ARM: pxa: Introduce pxa{25x,27x,3xx}_map_io()Marek Vasut1-0/+17
This patch introduces pxa2xx_map_io() and pxa3xx_map_io() to distinguish between PXA25x/PXA27x and PXA3xx memory mapping. Also, fixup for platforms broken after introducing pxa{25x,27x}_map_io() and pxa3xx_map_io() is included. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-31 00:13:22 +0000