summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/icontrol.c
AgeCommit message (Collapse)AuthorFilesLines
2022-07-22ARM: pxa2xx: Fix GPIO descriptor tablesLinus Walleij1-2/+2
Laurence reports: "Kernel >5.18 on Zaurus has a bug where the power management code can't talk to devices, emitting the following errors: sharpsl-pm sharpsl-pm: Error: AC check failed: voltage -22. sharpsl-pm sharpsl-pm: Charging Error! sharpsl-pm sharpsl-pm: Warning: Cannot read main battery! Looking at the recent changes, I found that commit 31455bbda208 ("spi: pxa2xx_spi: Convert to use GPIO descriptors") replaced the deprecated SPI chip select platform device code with a gpiod lookup table. However, this didn't seem to work until I changed the `dev_id` member from the device name to the bus id. I'm not entirely sure why this is necessary, but I suspect it is related to the fact that in sysfs SPI devices are attached under /sys/devices/.../dev_name/spi_master/spiB/spiB.C, rather than directly to the device." After reviewing the change I conclude that the same fix is needed for all affected boards. Fixes: 31455bbda208 ("spi: pxa2xx_spi: Convert to use GPIO descriptors") Reported-by: Laurence de Bruxelles <lfdebrux@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220722114611.1517414-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-01-31spi: pxa2xx_spi: Convert to use GPIO descriptorsLinus Walleij1-5/+21
This converts the PXA2xx SPI driver to use GPIO descriptors exclusively to retrieve GPIO chip select lines. The device tree and ACPI paths of the driver already use descriptors, hence ->use_gpio_descriptors is already set and this codepath is well tested. Convert all the PXA boards providing chip select GPIOs as platform data and drop the old GPIO chipselect handling in favor of the core managing it exclusively. Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: linux-arm-kernel@lists.infradead.org Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220125005836.494807-1-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-16ARM: pxa: icontrol: Constify the software nodeHeikki Krogerus1-4/+8
When device properties are supplied to the devices, in reality a software fwnode that holds those properties is created which is then assigned to the device. If the device properties are constant the software node can also be constant. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Link: https://lore.kernel.org/r/20210303152814.35070-3-heikki.krogerus@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-05Merge mainline/master into arm/fixesOlof Johansson1-4/+5
This brings in the mainline tree right after armsoc contents was merged this release cycle, so that we can re-run savedefconfig, etc. Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05ARM: pxa: Fix resource propertiesLinus Walleij1-3/+3
The conversion to properties changed one assignment and missed three other assignments in the same file, fix it up so the platform compiles. The bug was reported by a few build bots but noone noticed. I noticed it when making other changes to the PXA platforms. Link: https://lore.kernel.org/r/20191203104117.85517-1-linus.walleij@linaro.org Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: 50ec88120ea1 ("can: mcp251x: get rid of legacy platform data") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-11can: mcp251x: get rid of legacy platform dataAndy Shevchenko1-4/+5
Instead of using legacy platform data, switch to use device properties. For clock frequency we are using well established clock-frequency property. Users, two for now, are also converted here. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-23pxa2xx: replace spi_master with spi_controllerLubomir Rintel1-2/+2
It's also a slave controller driver now, calling it "master" is slightly misleading. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-01ARM: pxa: make more mach/*.h files localArnd Bergmann1-2/+2
Lots of header files are never included outside of a mach-pxa directory and do not need to be made visible in include/mach, so let's just move them all down one level. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-20ARM: pxa: Remove unused clock_enable field from struct pxa2xx_spi_masterJarkko Nikula1-2/+0
Use for struct pxa2xx_spi_master clock_enable field was removed years ago from the pxa2xx-spi driver by the commit 2f1a74e5a2de ("[ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()"). Therefore remove it from structure definition, documentation and from couple affected board files. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-07-16ARM: pxa: fix dm9000 platform data regressionRobert Jarzmik1-0/+3
Since dm9000 driver added support for a vcc regulator, platform data based platforms have their ethernet broken, as the regulator claiming returns -EPROBE_DEFER and prevents dm9000 loading. This patch fixes this for all pxa boards using dm9000, by using the specific regulator_has_full_constraints() function. This was discovered and tested on the cm-x300 board. Fixes: 7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2013-08-21can: mcp251x: Replace power callbacks with regulator APIAlexander Shiyan1-3/+0
This patch replaces power callbacks to the regulator API. To improve the readability of the code, helper for the regulator enable/disable was added. Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-12-24ARM: delete struct sys_timerStephen Warren1-1/+1
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-01-25ARM: pxa: remove NR_IRQSRob Herring1-0/+1
Remove NR_IRQS and add a per machine .nr_irqs setting. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-01-09Merge branch 'samsung/driver' into next/driversArnd Bergmann1-1/+2
Conflicts: arch/arm/mach-mxs/include/mach/common.h Pull in previous samsung conflict merges and do a trivial merge of an mxs double-add conflict. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-05ARM: restart: pxa: use new restart hookRussell King1-1/+2
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-14ARM: pxa: rename gpio_to_irq and irq_to_gpioHaojian Zhuang1-4/+4
Avoid to define gpio_to_irq() and irq_to_gpio() for potential name confliction since multiple architecture will be built together. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-08-21ARM: mach-pxa: convert boot_params to atag_offsetNicolas Pitre1-1/+1
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-07-12ARM: pxa: enable MULTI_IRQ_HANDLER for all boardsEric Miao1-0/+1
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-01-07Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-1/+1
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (77 commits) spi/omap: Fix DMA API usage in OMAP MCSPI driver spi/imx: correct the test on platform_get_irq() return value spi/topcliff: Typo fix threhold to threshold spi/dw_spi Typo change diable to disable. spi/fsl_espi: change the read behaviour of the SPIRF spi/mpc52xx-psc-spi: move probe/remove to proper sections spi/dw_spi: add DMA support spi/dw_spi: change to EXPORT_SYMBOL_GPL for exported APIs spi/dw_spi: Fix too short timeout in spi polling loop spi/pl022: convert running variable spi/pl022: convert busy flag to a bool spi/pl022: pass the returned sglen to the DMA engine spi/pl022: map the buffers on the DMA engine spi/topcliff_pch: Fix data transfer issue spi/imx: remove autodetection spi/pxa2xx: pass of_node to spi device and set a parent device spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes. spi/pxa2xx: Add chipselect support for Sodaville spi/pxa2xx: Consider CE4100's FIFO depth spi/pxa2xx: Add CE4100 support ...
2010-12-16ARM: pxa: Introduce pxa{25x,27x,3xx}_map_io()Marek Vasut1-1/+1
This patch introduces pxa2xx_map_io() and pxa3xx_map_io() to distinguish between PXA25x/PXA27x and PXA3xx memory mapping. Also, fixup for platforms broken after introducing pxa{25x,27x}_map_io() and pxa3xx_map_io() is included. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-01arm/pxa2xx: reorgazine SSP and SPI header filesSebastian Andrzej Siewior1-1/+1
The PXA-SPI driver relies on some files / defines which are arm specific and are within the ARM tree. The CE4100 SoC which is x86 has also the SPI core. This patch moves the ssp and spi files from arm/mach-pxa and plat-pxa to include/linux where the CE4100 can access them. This move got verified by building the following defconfigs: cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig raumfeld_defconfig magician_defconfig Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
2010-10-20arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre1-2/+0
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
2010-03-30Add hotplug support to mcp251x driverMarc Zyngier1-5/+4
Chip model can now be selected directly by matching the modalias name (instead of filling the .model field in platform_data), and allows the module to be auto-loaded. Previous behaviour is of course still supported. Convert the two in-tree users to this feature (icontrol & zeus). Tested on an Zeus platform (mcp2515). Signed-off-by: Marc Zyngier <maz@misterjones.org> Acked-by: Christian Pellegrin <chripell@fsfe.org> Cc: Edwin Peer <epeer@tmtservices.co.za> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02[ARM] pxa: add support for Embedian MXM-8x10Edwin Peer1-0/+202
Signed-off-by: Edwin Peer <epeer@tmtservices.co.za> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-31 00:24:51 +0000