summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/sh73a0.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2013-12-10ARM: shmobile: sh73a0: fixup sdhi compatible nameKuninori Morimoto1-3/+3
sh73a0 != r8a7740 Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use interrupt macros in SoC DT filesLaurent Pinchart1-63/+65
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: sh73a0: tidyup DT node namingKuninori Morimoto1-4/+4
According to ePAPR spec, this patch tidies up DT node name and related clock. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-14Merge tag 'omap-for-v3.13/quirk-signed' of ↵Kevin Hilman1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt From Tony Lindgren: Changes needed to prepare for making omap3 device tree only: - Always build in board-generic, and add pdata quirks and auxdata support for it so we have all the pdata related quirks in the same place. - Merge of the drivers/pinctrl changes that are needed for PM to continue working on omap3 and also needed for other omaps eventually. The three pinctrl related patches have been acked by Linus Walleij and are pulled into both the pinctrl tree and this branch. - Few defconfig related changes for drivers needed. * tag 'omap-for-v3.13/quirk-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (523 commits) ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies ARM: OMAP2+: Add WLAN modules and of_serial to omap2plus_defconfig ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it ARM: OMAP2+: Add minimal 8250 support for GPMC ARM: OMAP2+: Use pdata quirks for wl12xx for omap3 evm and zoom3 ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap ARM: OMAP2+: Add support for auxdata pinctrl: single: Add support for auxdata pinctrl: single: Add support for wake-up interrupts pinctrl: single: Prepare for supporting SoC specific features ARM: OMAP2+: igep0020: use display init from dss-common ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board +Linux 3.12-rc4 Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-10-08ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boardsGuennadi Liakhovetski1-0/+5
Currently all I2C interfaces in all *.dtsi files for various Renesas SoCs are enabled by default. Switch them all off and only enable populated I2C interfaces in board-specific *.dts files. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-21ARM: shmobile: update SDHI DT compatibility string to the <unit>-<soc> formatGuennadi Liakhovetski1-3/+3
Currently DT compatibility strings of both types can be found in the kernel sources: <unit>-<soc> and <soc>-<unit>, whereas a unique format should be followed and the former one is preferred. This patch converts the SDHI MMC driver and its users to the common standard. This is safe for now, since ATM no real products are using this driver with DT. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Chris Ball <cjb@laptop.org> [Removed r8a7740.dtsi portion as it is not applicable] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-09Merge tag 'renesas-for-linus' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Renesas SoC cleanup, refactoring and more SMP support from Kevin Hilman: "Lots of cleanup and refactoring and some SMP additions for Renesas platforms. Due to some inter-dependencies with other arm-soc branches, this Renesas stuff was separated out for sending after the other branches were merged. Highlights: - remove unused board support and cleanup of unused headers - refactoring of init and device registration - simplify IRQ initialization" * tag 'renesas-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits) ARM: shmobile: Per-CPU SMP boot / sleep code for SCU SoCs ARM: shmobile: Introduce per-CPU SMP boot / sleep code ARM: shmobile: Use shared SCU CPU Hotplug code on r8a7779 ARM: shmobile: Use shared SCU CPU Hotplug code on sh73a0 ARM: shmobile: Add shared SCU CPU Hotplug code ARM: shmobile: Use shared SCU SMP boot code on emev2 ARM: shmobile: Use shared SCU SMP boot code on r8a7779 ARM: shmobile: Use shared SCU SMP boot code on sh73a0 ARM: shmobile: Introduce shared SCU SMP boot code ARM: shmobile: sh73a0: Remove global GPIO_NR definition ARM: shmobile: kzm9d: remove nfsroot settings from bootargs ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs ARM: shmobile: r8a7779: move r8a7779_init_irq_xxx() to setup ARM: shmobile: r8a7740: move r8a7740_init_irq_of() to setup ARM: shmobile: bockw: add missing __initdata ARM: shmobile: r8a7790: add missing __initdata ARM: shmobile: r8a7779: add missing __initdata ARM: shmobile: Remove unused shmobile_init_time() ARM: shmobile: Use clocksource_of_init() on r8a7790 ARM: shmobile: Use default ->init_time() on KZM9G DT ref ...
2013-07-31ARM: shmobile: sh73a0: add PMU information to sh73a0.dtsiMagnus Damm1-0/+6
Add PMU information to sh73a0.dtsi. With this included KZM9G DT reference may use the PMU. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22ARM: shmobile: sh73a0: Add pin control device to device treeLaurent Pinchart1-0/+8
Add a pfc node to the sh73a0 device tree and remove manual pinmux initialization from the corresponding board files. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-18ARM: shmobile: sh73a0: remove "0x" prefix from DT node namesGuennadi Liakhovetski1-9/+9
The convention for Device Tree node names is <device>@<hex-address>, where the part after '@' shouldn't contain the "0x" prefix. Fix the sh73a0.dtsi DT names. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-03Merge tag 'renesas-pinmux2-for-v3.10' into boards-baseSimon Horman1-0/+81
Second round of Renesas ARM and SH based SoC pinmux updates for v3.10 Highlights: * Compilation fixes for sh7269 and for when CONFIG_BUG is not set * sh-pfc Support for r8a73a4 SoC * Move GPIOs handling from the PFC device to separate GPIO devices on the r8a7779 SoC This pull request is based on a merge of: git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-pinmux-for-v3.10 git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-soc2-for-v3.10 This merge is made to supply run-time dependencies for the following patches that will bea added on top: ARM: shmobile: APE6EVM LAN9220 support ARM: shmobile: APE6EVM PFC support
2013-04-02ARM: shmobile: sh73a0: add irqpin DT nodesGuennadi Liakhovetski1-0/+81
Add DT nodes for the 4 irqpin interrupt controllers on sh73a0. We add them to sh73a0.dtsi, which is also used by configurations, doing all their device instantiation from board the .c code. We rely on the fact, that such configurations don't instantiate devices from the device-tree. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21ARM: shmobile: kzm9g-reference: fix device-tree bindings and device namesGuennadi Liakhovetski1-6/+6
Fix several device-tree bindings, that haven't been updated for newest versions of respective drivers, and device names and pin numbers, left over from non-DT and old pinctrl versions. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsiGuennadi Liakhovetski1-0/+44
To avoid having to repeat common DT node properties in all .dts files move them to SoC's .dtsi file, setting their status to "disabled." Individual boards will pick up devices, that they want to use and change their DT node status to enabled. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-29ARM: mach-shmobile: sh73a0: Add reg and device_type properties to cpusSimon Horman1-0/+7
Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25ARM: mach-shmobile: sh73a0: Minimal setup using DTSimon Horman1-0/+60
Allow a minimal setup of the sh73a0 SoC using a flattened device tree. In particular, Configure the i2c controllers using a flattened device tree. SCI serial controller and CMT clock source, whose drivers do not yet support configuration using a flattened device tree, are still configured using C code in order to allow booting of a board with this SoC. *** Please note that the clock initialisation scheme used in this patch does not currently work with SMP as there is a yet to be resolved lock-up in workqueue initialisation. CONFIG_SMP must be disabled when using this code. *** Includes update from Thierry Reding to no longer use gic_handle_irq() Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> fix
2013-01-25ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DTSimon Horman1-0/+33
This allows the GIC interrupt controller of the sh73a0 SoC to be initialised using a flattened device tree blob. It does not allow the INTC interrupt controller which is also present on the sh73a0 SoC to be enabled via device tree. Nor does it handle sharing of interrupts between the GIC and INTC interrupt controllers. This limits the usefulness of this code to applications which only wish to access devices which use interrupts that can be handled by the GIC interrupt controller. Other applications should, for now, continue using non-device tree initialisation of the sh72a0 interrupt controllers. Includes update to use irqchip_init() by Thierry Reding Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 14:39:37 +0000