summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/am57xx-idk-common.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2022-11-18ARM: dts: omap: trim addresses to 8 digitsKrzysztof Kozlowski1-1/+1
Hex numbers in addresses and sizes should be rather eight digits, not nine. Drop leading zeros. No functional change (same DTB). Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20221115105053.95430-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-04-20ARM: dts: omap: align SPI NOR node name with dtschemaKrzysztof Kozlowski1-1/+1
The node names should be generic and SPI NOR dtschema expects "flash". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220407143304.295610-1-krzysztof.kozlowski@linaro.org
2020-09-10ARM: dts: am57xx-idk: switch to new cpsw switch drvGrygorii Strashko1-5/+9
Switch all am571/2/4-idk boards to use new cpsw switch driver. Those boards have 2 Ext. port wired and configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-13Replace HTTP links with HTTPS ones: OMAP DEVICE TREE SUPPORTAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-06-04Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-0/+58
Pull ARM devicetree updates from Arnd Bergmann: "This is the set of device tree changes, mostly covering new hardware support, with 577 patches touching a little over 500 files. There are five new Arm SoCs supported in this release, all of them for existing SoC families: - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS devices and Android Set-top-box designs, along with the "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4 single-board computer. - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and the iW-RainboW-G21D-Qseven-RZG1H board/SoM - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO Advance game console Newly added machines on already supported SoCs are: - AMLogic S905D based Smartlabs SML-5442TW TV box - AMLogic S905X3 based ODROID-C4 SBC - AMLogic S922XH based Beelink GT-King Pro TV box - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO OpenPower P9 "Nicole" - Marvell Kirkwood based Check Point L-50 router - Mediatek MT8173 based Elm/Hana Chromebook laptops - Microchip SAMA5D2 "Industrial Connectivity Platform" reference board - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit - Octavo OSDMP15x based Linux Automation MC-1 development board - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone - Realtek RTD1295 based Xnano X5 TV Box - STMicroelectronics STM32MP1 based Stinger96 single-board computer and IoT Box - Samsung Exynos4210 based based Samsung Galaxy S2 phone - Socionext Uniphier based Akebi96 SBC - TI Keystone based K2G Evaluation board - TI am5729 based Beaglebone-AI development board Include device descriptions for additional hardware support in existing SoCs and machines based on all major SoC platforms: - AMlogic Meson - Allwinner sunxi - Arm Juno/VFP/Vexpress/Integrator - Broadcom bcm283x/bcm2711 - Hisilicon hi6220 - Marvell EBU - Mediatek MT27xx, MT76xx, MT81xx and MT67xx - Microchip SAMA5D2 - NXP i.MX6/i.MX7/i.MX8 and Layerscape - Nvidia Tegra - Qualcomm Snapdragon - Renesas r8a77961, r8a7791 - Rockchips RK32xx/RK33xx - ST-Ericsson ux500 - STMicroelectronics SMT32 - Samsung Exynos and S5PV210 - Socionext Uniphier - TI OMAP5/DRA7 and Keystone" * tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits) ARM: dts: keystone: Rename "msmram" node to "sram" arm: dts: mt2712: add uart APDMA to device tree arm64: dts: mt8183: add mmc node arm64: dts: mt2712: add ethernet device node arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1 ARM: dts: mmp3: Add the fifth SD HCI ARM: dts: berlin*: Fix up the SDHCI node names ARM: dts: mmp3: Fix USB & USB PHY node names ARM: dts: mmp3: Fix L2 cache controller node name ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa910: Fix the gpio interrupt cell number ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property ARM: dts: pxa168: Fix the gpio interrupt cell number ARM: dts: pxa168: Add missing address/size cells to i2c nodes ARM: dts: dove: Fix interrupt controller node name ARM: dts: kirkwood: Fix interrupt controller node name arm64: dts: Add SC9863A emmc and sd card nodes arm64: dts: Add SC9863A clock nodes arm64: dts: mt6358: add PMIC MT6358 related nodes ...
2020-05-07ARM: dts: am57xx: fix networking on boards with ksz9031 phyGrygorii Strashko1-2/+2
Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") the networking is broken on boards: am571x-idk am572x-idk am574x-idk am57xx-beagle-x15 All above boards have phy-mode = "rgmii" and this is worked before because KSZ9031 PHY started with default RGMII internal delays configuration (TX off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the KSZ9031 PHY starts handling phy mode properly and disables RX delay, as result networking is become broken. Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous behavior. Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Philippe Schenker <philippe.schenker@toradex.com> Fixes: bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-04-21ARM: dts: am57xx-idk-common: add tc358778 bridgeTomi Valkeinen1-0/+58
AM5 IDK boards have TC358778 DPI-to-DSI bridge. Two different DSI panel models are used with the AM5 IDKs, and these panels are added with DT overlays. The AM5 IDKs can also be used without any panel. Add TC358778 data to the am57xx-idk-common.dtsi, but set the status to disabled. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-12ARM: dts: am57xx-idk-common: add HDMI to the common dtsiTomi Valkeinen1-0/+59
AM571x/AM572x/AM574x IDK base boards have HDMI output. Add DT nodes to am57xx-idk-common.dtsi to enable HDMI. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-11-20ARM: dts: am571x-idk: enable for new cpsw switch dev driverGrygorii Strashko1-5/+0
Add DT nodes for new cpsw switchdev driver for am571x-idk board for now to enable testing of the new solution. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-21Merge tag 'spdx-5.2-rc6' of ↵Linus Torvalds1-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull still more SPDX updates from Greg KH: "Another round of SPDX updates for 5.2-rc6 Here is what I am guessing is going to be the last "big" SPDX update for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that were "easy" to determine by pattern matching. The ones after this are going to be a bit more difficult and the people on the spdx list will be discussing them on a case-by-case basis now. Another 5000+ files are fixed up, so our overall totals are: Files checked: 64545 Files with SPDX: 45529 Compared to the 5.1 kernel which was: Files checked: 63848 Files with SPDX: 22576 This is a huge improvement. Also, we deleted another 20000 lines of boilerplate license crud, always nice to see in a diffstat" * tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485 ...
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02ARM: dts: am57xx-idk: Remove support for voltage switching for SD cardFaiz Abbas1-0/+1
If UHS speed modes are enabled, a compatible SD card switches down to 1.8V during enumeration. If after this a software reboot/crash takes place and on-chip ROM tries to enumerate the SD card, the difference in IO voltages (host @ 3.3V and card @ 1.8V) may end up damaging the card. The fix for this is to have support for power cycling the card in hardware (with a PORz/soft-reset line causing a power cycle of the card). Since am571x-, am572x- and am574x-idk don't have this capability, disable voltage switching for these boards. The major effect of this is that the maximum supported speed mode is now high speed(50 MHz) down from SDR104(200 MHz). Cc: <stable@vger.kernel.org> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-24ARM: dts: am57xx-idk-common: Hook smps12 regulator as cpu vdd-supplyKeerthy1-0/+4
am574x-idk has no cpu vdd-supply at the moment. Hence hook smps12 regulator as cpu vdd-supply in am57xx-idk-common as the same regulator feeds on to cpu on am571/2/4-idks. So remove all the individual instances and place that in common place. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-20ARM: dts: am57xx-idk-common: get rid of phy_id propertyGrygorii Strashko1-2/+12
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-02ARM: dts: am57xx-idk: Enable dual role for USB2 portRoger Quadros1-1/+6
Dual-role support was added in v4.12. We should be using it for USB2 port on the am57xx-idk. Cc: <stable@vger.kernel.org> [4.16+] Reported-by: Bin Liu <b-liu@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-05-03ARM: dts: dra7: Use sdhci-omap programming modelKishon Vijay Abraham I1-1/+2
Use sdhci-omap programming model based on the generic sdhci library for programming the eMMC/SD/SDIO controller. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-05-03ARM: dts: am57xx-idk: Use pinctrl group from dra7-mmc-iodelay.dtsi to select ↵Kishon Vijay Abraham I1-11/+0
pulldown commit 18aa0f4bca701cb078a6 ("ARM: dts: am57xx-idk: Select pull down for mmc1_clk line in default mode") modified mmc1_pins_default pinctrl group in am57xx-idk-common.dtsi in order to change the CLK line to PIN_INPUT_PULLDOWN. However instead of modifying the pinctrl group, use the new pinctrl group "mmc1_pins_default_no_clk_pu" in dra7-mmc-iodelay.dtsi added specifically to be used for CLK line without external pull up. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28ARM: dts: am57xx-idk: Select pull down for mmc1_clk line in default modeKishon Vijay Abraham I1-0/+11
During a short period when the bus voltage is switched from 3.3v to 1.8v, (to enumerate UHS mode), the mmc module is disabled and the mmc IO lines are kept in a state according to the programmed pad mux pull type. According to 4.2.4.2 Timing to Switch Signal Voltage in "SD Specifications Part 1 Physical Layer Specification Version 5.00 February 22, 2016", the host should hold CLK low for at least 5ms. In order to keep the card line low during voltage switch, the pad mux of mmc1_clk line should be configured to pull down. This is specific to am57xx-idk (and not all dra72/dra74 based boards) since mmc1_clk line in am57xx-idk is not connected to an external pullup. While at that change the order of header files in am571x-idk.dts and am572x-idk.dts so that the modified pinctrl values in am57xx-idk-common could take effect. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28ARM: dts: am57xx-idk: Add "vqmmc-supply" property for mmc2Kishon Vijay Abraham I1-0/+1
Add "vqmmc-supply" property for mmc2 to indicate the supply connected to the IO lines. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-16ARM: dts: am57xx-idk: Move common MMC/SD properties to common fileSekhar Nori1-0/+8
AM572x IDK and AM571x IDK boards have equivalent design of how SD card and eMMC are connected. The two EVMs mainly differ in IOdelay configuration needed (because of difference in SoC used). Move the common properties to am57xx-idk-common.dtsi file which is common for both EVMs. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-05-09Merge tag 'armsoc-dt' of ↵Linus Torvalds1-0/+24
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Device-tree updates from Olof Johansson: "Device-tree continues to see lots of updates. The majority of patches here are smaller changes for new hardware on existing platforms, and there are a few larger changes worth pointing out. Major new platforms: - Gemini has been ported to DT, so a handful of "new" platforms moved over from board files - Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288 SoM and RDK - A bunch of embedded platforms, several Linksys platforms, Synology DS116, - Motorola Droid4 (really old OMAP-based phone) support is added. Some refactorings, i.e. Allwinner H3/H5 support is commonalized. And lots of smaller changes, cleanups, etc. See shortlog for more description We're adding ability to cross-include DT files between arm and arm64, by creating appropriate links in the dt-include directory, and using arm/ and arm64/ as include prefixes. This will avoid other local hacks such as per-file links between the two arch trees (this broke for external mirroring of DT contents). Now they can just provide their own appropriate dt-include hierarcy per platform" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (349 commits) ARM: dts: exynos: Use - instead of @ for DT OPP entries arm: spear6xx: add DT description of the ADC on SPEAr600 arm: spear6xx: remove unneeded pinctrl properties in spear600-evb arm: spear6xx: switch spear600-evb to the new flash partition DT binding arm: spear6xx: fix spaces in spear600-evb.dts arm: spear6xx: use node labels in spear600-evb.dts arm: spear6xx: add labels to various nodes in spear600.dtsi ARM: dts: vexpress: fix few unit address format warnings ARM: dts: at91: sama5d3_xplained: not all ADC channels are available ARM: dts: at91: sama5d3_xplained: fix ADC vref ARM: dts: at91: add envelope detector mux to the Axentia TSE-850 ARM: dts: armada-38x: label USB and SATA nodes ARM: dts: imx6q-utilite-pro: add hpd gpio ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply ARM: dts: imx6qdl-sabresd: Set LDO regulator supply ARM: dts: imx: add Gateworks Ventana GW5903 support ARM: dts: i.MX25: add AIPS control registers ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators ARM: dts: imx7-colibri: remove 1.8V fixed regulator ARM: dts: imx7-colibri: allow to disable Ethernet rail ...
2017-04-04ARM: dts: am57xx-idk: Add DCAN supportSchuyler Patton1-0/+24
AM571x IDK and the AM572x IDK use CAN1 interface. This patch enables it for both boards. Tested on AM572x IDK using cansequence. Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> [nsekhar@ti.com: move to use DRA7XX_CORE_IOPAD()) Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-02-28Merge branch 'gpio-key-wakeup-fix' into omap-for-v4.11/fixesTony Lindgren1-0/+4
2017-02-28ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPISekhar Nori1-7/+7
commit 50e95b6b854c ("ARM: dts: am57xx-idk: Add Industrial output support") added the TPIC2810 device-tree node under SPI bus instead of I2C1. Fix it. Tested on AM572x IDK by driving on-board LEDs connected to TPIC2810 Fixes: 50e95b6b854c ("ARM: dts: am57xx-idk: Add Industrial output support") Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-29Merge tag 'omap-for-v4.11/dt-signed-v2' of ↵Olof Johansson1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Device tree changes for omaps for v4.11 merge window. These changes add earlycon stdout-path propety for the SoCs so far tested with it. The other changes are addition of BeagleBone green and making WLAN work on BeagleBone black wireless and green wireless. The rest of the changes are the usual enabling features on various devices: - Enable devices on am335x-sl50 - Changes to dra7-evm boards to enable enable irqs for dp83867 eth phys, add pinmux configuration for mmc, remov erratum i869 pinmux configurations, disable NAND support because of pin conflict, add pcf8575 used for lcd - Remove NAND partition table for omap3-igep - Configure USB Ethernet MAC from device tree for beagleboard xm, pandaboard, omap5-uevm and igepv5 - Configure am335x-chilisom to wake from RTC-only state - Update Nanobone for external FRAM chip - Clean up n900 dts - Update am335x-phycore and am335x-wega for various devices - Changes for am57xx-beagle-x15 to implement rgmii2 errata * tag 'omap-for-v4.11/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (35 commits) ARM: dts: dra72/1-evm: add pcf8575 used for lcd ARM: dts: dra7xx: Add stdout-path property ARM: dts: am57xx: Add stdout-path property ARM: dts: am43xx: Add stdout-path property ARM: dts: am33xx: Add stdout-path property ARM: dts: am335x-sl50: Enable the Ambient Light Sensor. ARM: dts: am335x-sl50: Enable the MCP23017 GPIO Expander. ARM: dts: am335x-sl50: Enable BQ32000 Real Time Clock. ARM: dts: am335x-sl50: Enable SPI0 interface and Flash Memory. ARM: dts: am335x-sl50: Enable UART1. ARM: dts: am335x-sl50: Remove I2C1 node. ARM: dts: omap3-igep: Remove NAND partition table ARM: dts: am57xx-beagle-x15: implement errata "Ethernet RGMII2 Limited to 10/100 Mbps" ARM: dts: am335x-phycore-som: Remove partition tables ARM: dts: dra72-evm-revc: enable irqs for dp83867 eth phys ARM: dts: Configure BeagleBone peripheral USB VBUS irq ARM: dts: omap5-igep0050: Allow bootloader to configure USB Ethernet MAC ARM: dts: omap5-uevm: Allow bootloader to configure USB Ethernet MAC ARM: dts: pandaboard: Allow bootloader to configure USB Ethernet MAC ARM: omap3: beagleboard-xm: dt: Add ethernet to the device tree ... Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-20ARM: dts: am57xx: Add stdout-path propertyLokesh Vutla1-0/+4
Add stdout-path property in /chosen node so that earlycon can be used by just adding earlycon in bootargs. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: am57xx-idk: Put USB2 port in peripheral modeRoger Quadros1-1/+1
USB2 port can be operated in dual-role mode but till we have dual-role support in dwc3 driver let's limit this port to peripheral mode. If we don't do so it defaults to host mode. USB1 port is meant for host only operation and we don't want both ports in host only mode. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: am57xx-idk: Support VBUS detection on USB2 portRoger Quadros1-0/+7
VBUS detection is available on the board via the palmas PMIC. Use extcon-palmas driver instead of extcon-gpio-usb driver. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-23ARM: dts: am57xx-idk-common: Add overide powerhold propertyKeerthy1-0/+1
The PMICs have POWERHOLD set by default which prevents PMIC shutdown even on DEV_CTRL On bit set to 0 as the Powerhold has higher priority. So to enable pmic power off this property lets one over ride the default value and enable pmic power off. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-18ARM: dts: am57xx-idk: Add Industrial output supportAndrew F. Davis1-0/+59
The TPIC2810 is available on both the AM571x and the AM572x IDKs and is attached to I2C1. Output is attached to the I/O header and 10 LEDs. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-18ARM: dts: am57xx-idk: Add Industrial input supportAndrew F. Davis1-0/+15
The SN65HVS882 is available on both the AM572x and AM571x IDKs and is attached to SPI1. Input is attached to the I/O header. The load trigger is attached to GPIO3_19 on the AM572x IDK. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-26ARM: dts: am57xx-idk-common: Enable support for QSPIVignesh R1-0/+49
AM572x IDK has a Spansion s25fl256s1 QSPI flash on the EVM connected to TI QSPI IP over CS0. Hence, add QSPI and flash slave DT nodes. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-05-12ARM: dts: am57xx-idk-common: Fix input supply namesNishanth Menon1-15/+17
Palmas Regulator is an exception and does not follow the standard "vin-supply" common definitions for all regulators, as a result of this, the input supplies are not reported to regulator framework, with the obvious result of not being appropriately mapped. Fix the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-28ARM: dts: am57xx-idk: Include Industrial grade thermal thresholdsKeerthy1-0/+2
am57xx-idk have Industrial grade samples whose thermal thresholds are different as compared with dra7. Hence correcting the same. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-12ARM: dts: AM572x-IDK Initial SupportSchuyler Patton1-0/+302
The AM572x-IDK board is a board based on TI's AM5728 SOC which has a dual core 1.5GHz A15 processor. This board is a development platform for the Industrial market with: - 2GB of DDR3L - Dual 1Gbps Ethernet - HDMI, - PRU-ICSS - uSD - 16GB eMMC - CAN - RS-485 - PCIe - USB3.0 - Video Input Port - Industrial IO port and expansion connector The link to the data sheet and TRM can be found here: http://www.ti.com/product/AM5728 This patch creates a common dtsi file that will provide a common board dtsi file to define the nodes that are common to AM57xx (including the upcoming AM5718) IDK boards. Initial support is only for basic peripherals Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-29 16:49:21 +0000