| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Qualcomm DTS updates for 6.2
This introduces support for the OnePlus One, on MSM8974Pro, and properly
marks other Pro devices as compatible thereof. Also on MSM8974, the
description of USB devices and their PHYs are cleaned up.
On the binding side compatibles for recently added ARM and ARM64 boards
are added.
* tag 'qcom-dts-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (102 commits)
dt-bindings: arm: qcom: Add zombie
ARM: dts: qcom: msm8974: Add OnePlus One
dt-bindings: arm: qcom: Document oneplus,bacon device
ARM: dts: qcom: msm8974: clean up USB nodes
arm: dts: qcom: use qcom,msm8974pro for pro devices
dt-bindings: arm: qcom: split MSM8974 Pro and MSM8974
ARM: dts: qcom: align LED node names with dtschema
dt-bindings: arm: qcom: Document additional sa8540p device
dt-bindings: arm: qcom: Add Xperia 5 IV (PDX224)
dt-bindings: arm: qcom: Document msm8956 and msm8976 SoC and devices
dt-bindings: arm: add xiaomi,sagit board based on msm8998 chip
dt-bindings: arm: qcom: add sdm670 and pixel 3a compatible
dt-bindings: arm: cpus: add qcom kryo 360 compatible
ARM: dts: qcom-msm8960-cdp: align TLMM pin configuration with DT schema
ARM: dts: qcom-msm8960: use define for interrupt constants
dt-bindings: arm: qcom: Document SM6375 & Xperia 10 IV
ARM: dts: qcom-apq8060: align TLMM pin configuration with DT schema
ARM: dts: qcom: msm8226: Add MMCC node
dt-bindings: arm: qcom: Separate LTE/WIFI SKU for sc7280-evoker
dt-bindings: arm: qcom: Document QDU1000/QRU1000 SoCs and boards
...
Link: https://lore.kernel.org/r/20221207153201.3233015-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
OnePlus One is a smartphone launched in 2014 and is based on the
Snapdragon 801 SoC (-AC variant).
Supported features:
* ADSP
* Charger
* Coincell charger
* Fuel gauge
* Internal storage
* Touchscreen
* UART
* USB
* Wifi/Bluetooth
Signed-off-by: Julian Goldsmith <julian@juliangoldsmith.com>
Co-developed-by: Oleg Chernovskiy <kanedias@keemail.me>
Signed-off-by: Oleg Chernovskiy <kanedias@keemail.me>
Co-developed-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221128172531.828660-2-luca@z3ntu.xyz
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.2, please pull the following:
- Linus adds support for the D-Link DWL-8610AP which is based upon the
BCM53016 SoC and the D-Link DIR-890L routers
- Maxime resolves a long standing issue affecting Raspberry Pi devices
by switching entirely over to the VPU firmware clock provider rather
than mixing the "bare metal" clock driver and VPU
- Rafal corrects the description of the TP-Link router partitions to
use the "safeloader" partition parser
- Stefan fixes a number of invalid underscores in the bcm283x DTS files
and also moves the ACT LED into a separate DTS include file for better
re-use
- Krzysztof aligns the LEDs DT nodes to the proper schema format
- Pierre adds missing cache properties to various SoCs
* tag 'arm-soc/for-6.2/devicetree' of https://github.com/Broadcom/stblinux:
arm: dts: Update cache properties for broadcom
ARM: dts: broadcom: align LED node names with dtschema
ARM: dts: bcm283x: Move ACT LED into separate dtsi
ARM: dts: bcm283x: Fix underscores in node names
ARM: dts: BCM5301X: Correct description of TP-Link partitions
ARM: dts: bcm47094: Add devicetree for D-Link DIR-890L
dt-bindings: ARM: add bindings for the D-Link DIR-890L
ARM: dts: bcm2835-rpi: Use firmware clocks for display
ARM: dts: bcm283x: Remove bcm2835-rpi-common.dtsi from SoC DTSI
ARM: dts: bcm53016: Add devicetree for D-Link DWL-8610AP
dt-bindings: ARM: add bindings for the D-Link DWL-8610AP
Link: https://lore.kernel.org/r/20221129191755.542584-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt for 6.2 (part 1)
Fix assigned-addresses for every PCIe Root Port
Align LED node names with dtschema
Add a new kirkwood based board: Zyxel NSA310S
Fix compatible string for gpios for Armada 38x and 39x
Add interrupts for watchdog on Armada XP
Turris Omnia (Armada 385 based):
- Add switch port 6 node
- Add ethernet aliases
Switch to using gpiod API in pm-board code
* tag 'mvebu-dt-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: armada-xp: add interrupts for watchdog
ARM: dts: armada: align LED node names with dtschema
ARM: mvebu: switch to using gpiod API in pm-board code
ARM: dts: armada-39x: Fix compatible string for gpios
ARM: dts: armada-38x: Fix compatible string for gpios
ARM: dts: turris-omnia: Add switch port 6 node
ARM: dts: turris-omnia: Add ethernet aliases
ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port
ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port
ARM: dts: kirkwood: Add Zyxel NSA310S board
Link: https://lore.kernel.org/r/87cz979adf.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Zyxel NSA310S is a NAS based on Marvell kirkwood SoC.
Specification:
- Processor Marvell 88F6702 1 GHz
- 256MB RAM
- 128MB NAND
- 1x GBE LAN port (PHY: Marvell 88E1318)
- 2x USB 2.0
- 1x SATA
- 3x button
- 7x leds
- serial on J1 connector (115200 8N1) (GND-NOPIN-RX-TX-VCC)
Tested-by: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Acked-by: Adam Baker <linux@baker-net.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt
ASPEED device tree updates for 6.2
- New machines
* IBM Bonnell AST2600 BMC, for a Power10 server
* Delta AHE-50DC AST1250 BMC, for a 1U Open19 power shelf
- Removed machines
* IBM Mihawk AST2500 BMC, a Power9 server similar to Witherspoon
- Fixes and updates for bletchley, mtjade/mtmitchell, rainier/everest
* tag 'aspeed-6.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: mtjade: Add SMPro nodes
ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes
ARM: dts: aspeed: Add Delta AHE-50DC BMC
dt-bindings: arm: aspeed: document Delta AHE-50DC BMC
ARM: dts: aspeed: rainier: Fix pca9551 nodes
ARM: dts: aspeed: p10bmc: Add occ-hwmon nodes
ARM: dts: aspeed-g6: Add aliases for mdio nodes
ARM: dts: aspeed: Remove Mihawk
ARM: dts: aspeed: rainier,everest: Move reserved memory regions
ARM: dts: aspeed: Add IBM Bonnell system BMC devicetree
ARM: dts: aspeed: bletchley: Enable emmc and ehci1
ARM: dts: aspeed: bletchley: Update and fix gpio-line-names
ARM: dts: aspeed: bletchley: Update fusb302 nodes
ARM: dts: aspeed: bletchley: Bind presence-sledX pins via gpio-keys
ARM: dts: aspeed: bletchley: Disable GPIOV2 pull-down
ARM: dts: aspeed: bletchley: Change LED sys_log_id to active low
Link: https://lore.kernel.org/r/CACPK8Xfsc8BaL_qAgV+3Rk-AFcQoDVfTpMzHvq_rR-UYqwpNNQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.2, round 1
Highlights:
----------
- MPU:
- ST boards:
- Add MCP23017 IO expander support on stm32mp135f-dk board.
- Add stm32g0 support for USB typeC on stm32mp135f-dk
- Add USB (EHCI / OTG) on stm32mp135f-dk
- Add ADC support on stm32mp135f-dk
- Add USB2514B onboard hub on stm32mp157c-ev1
- DH:
- Fix severals Yaml DT validation issues
* tag 'stm32-dt-for-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (28 commits)
ARM: dts: stm32: Rename mdio0 to mdio on DHCOR Testbench board
ARM: dts: stm32: add mcp23017 IO expander on I2C1 on stm32mp135f-dk
ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13
ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk
ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13
ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk
ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk
ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk
ARM: dts: stm32: add USB OTG HS support on stm32mp131
ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131
ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131
ARM: dts: stm32: add PWR fixed regulators on stm32mp131
ARM: dts: stm32: Fix AV96 WLAN regulator gpio property
ARM: dts: stm32: add adc support on stm32mp135f-dk
ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk
ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk
ARM: dts: stm32: add adc support to stm32mp13
ARM: dts: stm32: Drop MMCI interrupt-names
ARM: dts: stm32: update vbus-supply of usbphyc_port0 on stm32mp157c-ev1
ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp157c-ev1
...
Link: https://lore.kernel.org/r/3235e5be-d89f-f76c-5e25-5d1210feb857@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm device tree update for 6.2:
- New device tree for Kobo Aura 2 E-Boot reader which is built on i.MX6SL
SoC.
- Enable backlight and boost support for imx6sl-tolino-shine2hd.
- Enable CYTTSP5 touchscreen support for E60K02.
- Enable Silergy SY7636A EPD PMIC on imx7d-remarkable2 epaper tablet.
- Add watchdog property 'fsl,suspend-in-wait' for i.MX6UL Phytec Phycore
SoM to avoid watchdog triggering in 'freeze' low power mode.
- Correct the polarity of AT86RF233 reset line for vf610-zii-dev-rev-c
board.
- A bunch of Colibri device tree updates from Marcel Ziswiler and Philippe
Schenker, correct USBH_PEN property, remove spurious debounce property,
add USB dual-role switching, and some cosmetic change.
- Other small and random changes.
* tag 'imx-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: colibri-imx6ull: Enable dual-role switching
ARM: dts: imx: e60k02: Add touchscreen
ARM: dts: imx6qdl-sabre: Add mmc aliases
ARM: dts: imx6ul/ull: suspend i.MX6UL watchdog in wait mode
ARM: dts: imx7d-remarkable2: Enable silergy,sy7636a
ARM: dts: imx6sl-tolino-shine2hd: Add backlight boost
ARM: dts: imx6sl-tolino-shine2hd: Add backlight
ARM: dts: colibri-imx7: fix confusing naming
ARM: dts: colibri-imx6ull: add -hog to gpio hogs
ARM: dts: colibri-imx6ull: enable default peripherals
ARM: dts: colibri-imx6ull: keep peripherals disabled
ARM: dts: ls1021: correct indentation
ARM: dts: vf610-zii-dev-rev-c: fix polarity of at86rf233 reset line
ARM: dts: imx7-colibri: remove spurious debounce property
ARM: dts: colibri-imx6: specify usbh_pen gpio being active-low
ARM: dts: colibri-imx6: move vbus-supply to module level device tree
ARM: dts: colibri-imx6: usb dual-role switching
ARM: dts: imx: Add devicetree for Kobo Aura 2
Link: https://lore.kernel.org/r/20221119125733.32719-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Initial version of devicetree sources for Pro5 EPCORE and ProEX boards.
These boards have UART, I2C, USB, eMMC and PCI endpoint in common.
Pro5 EPCORE board is a kind of Pro5 reference board with PCIe endpoint
card edge connector.
ProEX board shares peripherals with Linux and other systems, and some
of these ports are available in Linux.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20221117163219.3673-3-hayashi.kunihiko@socionext.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This is a 1U Open19 power shelf with six PSUs and 50 12VDC outputs via
LM25066 efuses. It's managed by a pair of AST1250 BMCs in a redundant
active/active configuration using a PCA9541 on each I2C bus to
arbitrate access between the two.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20221108001551.18175-3-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The platform has been removed from OpenBMC as it is unmaintained.
Link: https://lore.kernel.org/r/20221020224420.635938-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add a devicetree for the new Bonnell system.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Jim Wright <wrightj@linux.ibm.com>
Link: https://lore.kernel.org/r/20220818202422.741275-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This adds a device tree for the D-Link DIR-890L. This device
is very similar to D-Link DIR-885L, the differences are detailed
as a comment in the DTS file.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221107134104.1422169-2-linus.walleij@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
This adds a device tree for the BCM53016-based D-Link DWL-8610AP
access point wireless router.
The TRX-format partitions had to be named "firmware" due to
an OpenWrt patch that only accepts parting such nodes if they
are named "firmware".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221019193449.3036010-2-linus.walleij@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Add support for this smartwatch, based on Snapdragon 400 SoC.
Currently supported functionality:
* Internal storage
* USB
* Charger
* Power button
* Bluetooth
* Wifi
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924152937.4076-2-luca@z3ntu.xyz
|
|
This adds a devicetree for the Kobo Aura 2 Ebook reader. It is based
on boards marked with "37NB-E60QL0+4B1". It is equipped with an i.MX6SL
SoC.
Expected to work:
- Buttons
- Wifi (with external module)
- LED
- uSD
- USB
- RTC
- Fuel Gauge
- Backlight (if the required regulator is probed before the backlight,
specifying a supply is not supported by backlightdriver)
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add DT for DHCOR Testbench board, which is a testbench for testing of
DHCOR SoM during manufacturing. This is effectively a trimmed down
version of AV96 board with CSI-2 bridge, HDMI bridge, WiFi, Audio and
LEDs removed and used as GPIOs instead. Furthermore, the PMIC Buck3
is always configured from PMIC NVM to cater for both 1V8 and 3V3 SoM
variant.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add a device tree for the Samsung Galaxy Tab 4 10.1 (SM-T530) wifi tablet
based on the apq8026 platform.
Currently supported are accelerometer sensor, hall sensor,
internal storage, physical buttons (power & volume), screen
(based on simple-framebuffer set up by the bootloader), sdcard,
touchscreen and USB.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927214940.244480-4-matti.lehtimaki@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 6.1
- New machines
* AMD's DaytonaX AST2600 BMC, for the amd64 server
* Ampre's Mt. Mitchell AST2600 BMC, for the AmpereOne arm64 server
- Fixes and updates for bletchley, mtjade, yosemitev2 and the ast2600-evb
* tag 'aspeed-6.1-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: ast2600-evb-a1: Add compatible
ARM: dts: aspeed: ast2600evb: Fix compatible string
ARM: dts: aspeed: ast2600-evb: Enable Quad SPI RX tranfers
ARM: dts: aspeed-g6: Enable more UART controllers
ARM: dts: aspeed: yosemitev2: Disable the EEPROM driver
ARM: dts: aspeed: Add AMD DaytonaX BMC
dt-bindings: arm: aspeed: document AMD DaytonaX
ARM: dts: aspeed: Yosemite V2: Enable OCP debug card
ARM: dts: aspeed: mtjade: Remove gpio-keys entries
ARM: dts: aspeed: Add device tree for Ampere's Mt. Mitchell BMC
dt-bindings: arm: aspeed: document Ampere Mt.Mitchell BMC compatibles
ARM: dts: aspeed: bletchley: Remove hdc1080 node
ARM: dts: aspeed: bletchley: Add USB debug card IPMB node
ARM: dts: aspeed: ast2600-evb: Update I2C devices
Link: https://lore.kernel.org/r/CACPK8Xepnci+f+7Pi1jtXod8Jmt+OnJYfDRENjiP-xDBQwFCVg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add initial version of device tree for the BMC in the AMD DaytonaX
platform.
AMD DaytonaX platform is a customer reference board (CRB) with an
Aspeed ast2500 BMC manufactured by AMD.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220921210950.10568-3-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The Mt. Mitchell BMC is an ASPEED AST2600-based BMC for the Mt. Mitchell
hardware reference platform with AmpereOne(TM) processor.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220817071539.176110-3-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DTS updates for 6.1
Support for Samsung Galaxy E5, E7 and Grand Max is added, with support
for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value
Edition gains magnetometer support.
MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs.
On SA8295P ADP problems arising from regulators being switched into
low-power mode is worked around by removing this ability, for now.
The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC
related updates are introduced.
On SC7280 support for the CPU and LLC bwmon instances are introduced.
Soundwire, audio codecs and sound introduced for a variety of boards.
Using required-opps the USB controllers votes for a minimum corner on
VDD_CX.
The onboard USB Hub Herobrine is described. A new board, the Google
Evoker is added, as is another revision of Herobrine Villager.
On SC8280XP the USB controllers are marked as wakeup-sources, to keep
them powered during suspend. The CRD has HID devices marked as
wakeup-sources to enable resuming the system. In addition to these
changes the alternative touchpad is introduced on the Lenovo ThinkPad
X13s.
SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350
interconnect providers and GPI DMA is introduced. A description of the
PM7280b PMIC is added to Fairphone FP4 on SM7225.
With the multi-MSI support added in the PCIe controller, SM8250 gets all
its MSI interrupts added.
UFS ICE and the second SDHCI controller is introduced on SM8450. Support
for the Sony Xperia 1 IV is introduced.
Throughout a variety of platforms the TCSR mutex syscon is replaced with
the MMIO-based binding. TCSR nodes gained proper compatibles and halt
syscon nodes are split out from the mutex ranges.
A range of fixes to align with DT bindings are introduced. Among these
are the changes to the follow the TLMM binding and suffix pinctrl states
with -state and subnodes thereof with -pins, another is a number of
changes transitioning to use -gpios and introduction of proper parent
clock references in various clock providers.
* tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (136 commits)
arm64: dts: qcom: sc7280: Add required-opps for USB
arm64: dts: qcom: sm8450: fix UFS PHY serdes size
arm64: dts: qcom: ipq8074: fix PCIe PHY serdes size
arm64: dts: qcom: sa8295p-adp: add missing gpio-ranges in PMIC GPIOs
arm64: dts: qcom: sa8295p-adp: add fallback compatible to PMIC GPIOs
arm64: dts: qcom: msm8996-xiaomi: align PMIC GPIO pin configuration with DT schema
arm64: dts: qcom: msm8994-msft-lumia-octagon: align resin node name with bindings
arm64: dts: qcom: pmi8994: add missing MPP compatible fallback
dt-bindings: pci: QCOM Add missing sc7280 aggre0, aggre1 clocks
arm64: dts: qcom: sc7280: Add missing aggre0, aggre1 clocks
arm64: dts: qcom: sc7280-villager: Adjust LTE SKUs
dt-bindings: arm: qcom: Adjust LTE SKUs for sc7280-villager
arm64: dts: qcom: sc7280-herobrine: Add nodes for onboard USB hub
arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
arm64: dts: qcom: align SDHCI reg-names with DT schema
arm64: dts: qcom: sm8250: provide additional MSI interrupts
arm64: dts: qcom: msm8996: add #clock-cells and XO clock to the HDMI PHY node
arm64: dts: qcom: Use WCD9335 DT bindings
arm64: dts: qcom: msm8994: switch TCSR mutex to MMIO
arm64: dts: qcom: ipq6018: switch TCSR mutex to MMIO
...
Link: https://lore.kernel.org/r/20220921234854.1343238-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree change for 6.1
- A series from Alexander Stein to add missing properties for i.MX6 SRAM.
- Drop 'interrupts' property when 'interrupts-extended' is present. This
fixes a dtbs_check warning with i.MX6 DT.
- Update device trees to use generic name 'dma-controller' for SDMA.
- A set of changes from Krzysztof Kozlowski to align SPI, LED and
gpio-keys node name with dtschema.
- A series of indentation and white-space cleanups from Marcel Ziswiler
to address various checkpatch warnings.
- Add DDR pinmux defines to VF610 DT header.
- A couple of changes from Peng Fan to update clock-names and add IPG
clock for i.MX7ULP LPI2C devices.
- Improve device tree structure for Kontron i.MX6UL/ULL based boards.
- A series of changes from Tim Harvey to add CAN regulator for Gateworks
i.MX6QDL boards.
- Various small and random board specific updates.
* tag 'imx-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (40 commits)
ARM: dts: imx6qdl-gw54xx: add CAN regulator
ARM: dts: imx6qdl-gw53xx: add CAN regulator
ARM: dts: imx6qdl-gw52xx: add CAN regulator
ARM: dts: imx: update sdma node name format
ARM: dts: imx6: skov: migrate to resistive-adc-touch
ARM: dts: imx6sx-udoo-neo: don't use multiple blank lines
ARM: dts: imx6sl: use tabs for code indent
ARM: dts: imx6sx: add missing properties for sram
ARM: dts: imx6sll: add missing properties for sram
ARM: dts: imx6sl: add missing properties for sram
ARM: dts: imx6qp: add missing properties for sram
ARM: dts: imx6dl: add missing properties for sram
ARM: dts: imx6q: add missing properties for sram
ARM: dts: imx7ulp: Add IPG clock for lpi2c
ARM: dts: imx7ulp: update the LPI2C clock-names
ARM: dts: vf610: ddr pinmux
ARM: dts: imx6qdl-dhcom: Move IPU iomux node from PDK2 to SoM file
ARM: dts: imx6ul-kontron: Add imx6ull-kontron-bl to Makefile
ARM: dts: imx6ul-kontron: Simplify devicetree structure
ARM: dts: vf610: align SPI node name with dtschema
...
Link: https://lore.kernel.org/r/20220918092806.2152700-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The SAMA5D3-EDS board is an Ethernet Development Platform allowing for
evaluating many Microchip ethernet switch and PHY products. Various
daughter cards can connect via an RGMII connector or an RMII connector.
The EDS board is not intended for stand-alone use and has no ethernet
capabilities when no daughter board is connected. As such, this device
tree is intended to be used with a DT overlay defining the add-on board.
To better ensure consistency, some items are defined here as a form of
documentation so that all add-on overlays will use the same terms.
Link: https://www.microchip.com/en-us/development-tool/SAMA5D3-ETHERNET-DEVELOPMENT-SYSTEM
Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
[claudiu.beznea: s/gpio-inputs/gpio-keys in at91-sama5d3_eds.dts]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220909163022.13022-2-jerry.ray@microchip.com
|
|
After adding all necessary support for MSM8916 SMP/cpuidle without PSCI
on ARM32, build the Samsung Galaxy E5/E7/Grand Max device trees from the
arm64 tree together with the ARM32 include to allow booting this device on
ARM32.
The approach to include device tree files from other architectures is
inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is
used to build the device tree for both ARM32 and ARM64.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724095413.14135-1-linmengbo0689@protonmail.com
|
|
Add basic support for pcb8290. It has 2 lan8814 phys(each phy is a
quad-port) on the external MDIO bus and no SFP ports.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220825065135.1075049-1-horatiu.vultur@microchip.com
|
|
The imx6ull-kontron-bl.dtb wasn't build as part of the
CONFIG_SOC_IMX6UL option. Add it to the list.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
There is no need in differentiating between the different SoM versions
that only differ in memory size, etc. It's much cleaner to simplify
the devicetrees and let them be more generic.
If necessary the bootloader will update the devicetree dynamically
to contain the correct size of the memory.
We also get rid of the N6xxx notation in the compatibles and file
names, as they are not really used anymore and often result in
confusion.
This is a breaking change, but the impact shouldn't be too big and it
makes usage and maintenance easier in the future.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM new SoC support from Arnd Bergmann:
"This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk
drivers that are still under review and will be merged through the
corresponding subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC on the main
chip, plus an I/O chip and memory in the same"
* tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE
arm64: defconfig: Add Nuvoton NPCM family support
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add maintainer
reset: npcm: Add NPCM8XX support
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: using syscon instead of device data
ARM: dts: nuvoton: add reset syscon property
dt-bindings: reset: npcm: add GCR syscon property
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-bindings: timer: npcm: Add npcm845 compatible string
ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig
ARM: sunplus: Add initial support for Sunplus SP7021 SoC
irqchip: Add Sunplus SP7021 interrupt controller driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for v5.20 #4
It contains one new LAN966 based board, namely pcb8309, a cleanup
on Makefile to sort alphabetically LAN966 entries and 2 cleanups
on bindings.
* tag 'at91-dt-5.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
dt-bindings: soc: microchip: use absolute path to other schema
dt-bindings: soc: microchip: drop quotes when not needed
ARM: dts: lan966x: keep lan966 entries alphabetically sorted
ARM: dts: lan966x: add support for pcb8309
dt-bindings: arm: at91: add lan966 pcb8309 board
Link: https://lore.kernel.org/r/20220727075749.2445000-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Keep LAN966 entries alphabetically sorted.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220726084931.1789855-1-claudiu.beznea@microchip.com
|
|
Add basic support for pcb8309. It is similar with pcb8291 with one big
difference that is having 2 SFP cages. Therefore it has 4 network ports.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220722131836.2377720-3-horatiu.vultur@microchip.com
|
|
The board is unmaintained and unused, according to Joel, so simply let's
remove it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/all/CACPK8XfxXi8kQr+vxta8rD6SBgxLf_oBjAH0UkPBacQta552YQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20220623072428.33697-1-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 5.20, please pull the following:
- Stefan drops the unnecessary "#address-cells" and "#size-cells"
properties from the DPI node of BCM283x
- Anand documents and adds support for the 63178 and 6858 SoCs
- William migrates the 63138 platform over to ARCH_BCMBCA and ensures
that it is documented within the BCMBCA Device Tree binding documents.
He updates the 47622 DTS to remove unnecessary PSCI properties, fix
the GIC nodes and some minor cosmetic changes. He finally adds support
for the 63158, 4912, 6846, 6855, 6756, 63146, 6856, 63148, 6813, 6318
SoCs.
- Peter, Nicolas and Stefan adds the necessary Device Tree nodes to the
BCM2711 (Raspberry Pi 4) DTS to enable the use of the V3D GPU on these
platforms.
- Christian adds support for the BCM53015 based Cisco Meraki MR26
Wi-Fi access point.
- Krzysztof updates the Broadcom platforms DTS to add a missing
whitespace between the property name and its value.
* tag 'arm-soc/for-5.20/devicetree' of https://github.com/Broadcom/stblinux: (35 commits)
ARM: dts: Add BCM63138 generic board dts
ARM: dts: update dts files for bcmbca SoC BCM63138
ARM: dts: Move BCM963138DVT board dts to ARCH_BCMBCA
dt-bindings: arm: add BCM63138 SoC
ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node
ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node
dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711
dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names
dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema
ARM: dts: BCM5301X: Add DT for Meraki MR26
dt-bindings: ARM: add bindings for the Meraki MR26
dt-bindings: arm64: Add BCM6813 SoC
ARM: dts: Add DTS files for bcmbca SoC BCM63148
dt-bindings: arm: Add BCM63148 SoC
dt-bindings: arm64: Add BCM6856 SoC
dt-bindings: arm64: Add BCM63146 SoC
ARM: dts: broadcom: correct gpio-keys properties
ARM: dts: broadcom: align gpio-key node names with dtschema
ARM: dts: Add DTS files for bcmbca SoC BCM6756
dt-bindings: arm: Add BCM6756 SoC
...
Link: https://lore.kernel.org/r/20220711164451.3542127-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree change for 5.20:
- A series from Alexander Stein to fix some i.MX6UL dt_binding_check
warnings.
- Replace deprecated 'enable-sdio-wakeup' property with 'wakeup-source'
for a couple of boards.
- A set of imx7-colibri device tree updates from Marcel Ziswiler to
improve devices Display, Touch, Ethernet and SD/MMC, and also adds
Toradex Iris carrier board.
- A few improvements on imx6qdl-colibri board, correct SGTL5000 MCLK
handling, simplify handling of inverted PWM backlight.
- A series from Max Krummenacher (and Oleksandr Suvorov) to improve the
existing i.MX6 Apalis carrier board device trees and adds a new device
tree for the Ixora V1.2 carrier board.
- Add USB dual-role switching using extcon for imx7-colibri board.
- Add SFP node for TA 2.1 devices for LayerScape SoCs.
- Other small and random updates on various boards.
* tag 'imx-dt-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (61 commits)
ARM: dts: layerscape: Add SFP node for TA 2.1 devices
ARM: dts: imx6qdl-prti6q.dtsi: Add applicable properties to usdhc3
ARM: dts: imx6q-bosch-acc: Replace 'enable-sdio-wakeup'
ARM: dts: imx7d-smegw01: Replace 'enable-sdio-wakeup'
ARM: dts: imx6q-apalis: Cleanup
ARM: dts: imx6q-apalis: backlight pwm: Adapt brightness steps
ARM: dts: imx6q-apalis: backlight pwm: Simplify inverted backlight
ARM: dts: imx6q-apalis: Add support for Toradex Ixora V1.2 carrier boards
ARM: dts: imx6q-apalis: Clean-up sd card support
ARM: dts: imx6q-apalis: Add adv7280 video input
ARM: dts: imx6q-apalis: Add ov5640 mipi csi camera
ARM: dts: imx6q-apalis: Disable stmpe touchscreen
ARM: dts: imx6q-apalis: Disable HDMI
ARM: dts: imx6q-apalis: Add LVDS panel support
ARM: dts: imx6q-apalis: move gpio-keys to SoM dtsi
ARM: dts: imx6q-apalis: Move Atmel MXT touch ctrl to SoM dtsi
ARM: dts: imx6q-apalis: Move pinmux groups to SoM dtsi
ARM: dts: imx6q-apalis: Move parallel rgb interface to SoM dtsi
ARM: dts: imx6q-apalis: Command pmic to standby for poweroff
ARM: dts: imx6q-apalis: Add gpio-line-names
...
Link: https://lore.kernel.org/r/20220709082951.15123-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add generic bcm963138.dts file.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Use CONFIG_ARCH_BCMBCA to build all the BCMBCA SoC dts and remove
CONFIG_ARCH_BCM_63XX from the makefile
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Add the basic support for Sunplus SP7021-Demo-V3 board.
Signed-off-by: Qin Jian <qinjian@cqplus1.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v5.20, round 1
Highlights:
----------
- MCU:
-Fix whitespace coding style. No functional changes.
- MPU:
- General:
- Remove specific IPCC wakeup interrupt on STM32MP15.
- Enable OPTEE firmware and scmi support (clock/reset) on
STM32MP13. It allows to enable RCC clock driver.
- Add new pins configurations groups.
- DH boards:
- Add DHCOR based DRC Compact board. It embeds: 2xETH, 1xCAN,
uSD, USB, eMMC and SDIO wifi.
- Add ST MIPID02 bindings to AV96 (not enabled by default)
- OSD32:
- Correct vcc-supply for eeprom.
- fix missing internally connected voltage regulator (ldo3
supplied by vdd_ddr).
* tag 'stm32-dt-for-v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (25 commits)
ARM: dts: stm32: Add ST MIPID02 bindings to AV96
ARM: dts: stm32: Add alternate pinmux for RCC pin
ARM: dts: stm32: Add alternate pinmux for DCMI pins
ARM: dts: stm32: Add DHCOR based DRC Compact board
ARM: dts: stm32: Add alternate pinmux for UART5 pins
ARM: dts: stm32: Add alternate pinmux for UART4 pins
ARM: dts: stm32: Add alternate pinmux for UART3 pins
ARM: dts: stm32: Add alternate pinmux for SPI2 pins
ARM: dts: stm32: Add alternate pinmux for CAN1 pins
dt-bindings: arm: stm32: Add compatible string for DH electronics DHCOR DRC Compact
ARM: dts: stm32: Fix SPI2 pinmux pin comments on stm32mp15
ARM: dts: stm32: add optee reserved memory on stm32mp135f-dk
ARM: dts: stm32: add RCC on STM32MP13x SoC family
ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP13
dt-bindings: rcc: stm32: select the "secure" path for stm32mp13
ARM: dts: stm32: correct vcc-supply for eeprom on stm32mp15xx-osd32
ARM: dts: stm32: fix missing internally connected voltage regulator for OSD32MP1
ARM: dts: stm32: adjust whitespace around '=' on MCU boards
ARM: dts: stm32: Move DHCOR BUCK3 VDD 2V9 adjustment to 1V8 DTSI
ARM: dts: stm32: remove the IPCC "wakeup" IRQ on stm32mp151
...
Link: https://lore.kernel.org/r/a250f32b-f67c-2922-0748-e39dc791e95c@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add DT for DH DRC Compact unit, which is a universal controller device.
The system has two ethernet ports, one CAN, RS485 and RS232, USB, uSD
card slot, eMMC and SDIO Wi-Fi.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA dts updates for v5.20
- Clean up the Mercury++ AA1 dts
- Add support the Google Chameleon v3 board
- Add defined GIC interrupt type for Agilex ECC
- Fix coding style around Stratix10 QSPI dts entry
- Add support for Stratix10 SW Virtual platform
- Move clocks entry out of the Stratix10 soc node
* tag 'socfpga_dts_updates_for_v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: altera: socfpga_stratix10: move clocks out of soc node
arm64: dts: Add support for Stratix 10 Software Virtual Platform
dt-bindings: altera: document Stratix 10 SWVP compatibles
arm64: dts: altera: adjust whitespace around '='
arm64: dts: intel: socfpga_agilex: use defined GIC interrupt type for ECC
dt-bindings: altera: Add Chameleon v3 board
ARM: dts: socfpga: Add Google Chameleon v3 devicetree
ARM: dts: socfpga: Add atsha204a node to Mercury+ AA1 dts
ARM: dts: socfpga: Move sdmmc-ecc node to Arria 10 dts
ARM: dts: socfpga: Change Mercury+ AA1 dts to dtsi
Link: https://lore.kernel.org/r/20220626004437.1224820-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Nuvia has been acquired by Qualcomm and the vendor name 'nuvia' will
not be used anymore so rename aspeed-bmc-nuvia-dc-scm.dts to
aspeed-bmc-qcom-dc-scm-v1.dts and change 'nuvia' to 'qcom' as its vendor
name in the file.
Fixes: 7b46aa7c008d ("ARM: dts: aspeed: Add Nuvia DC-SCM BMC")
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220523175640.60155-1-quic_jaehyoo@quicinc.com
Link: https://lore.kernel.org/r/20220624070511.4070659-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Meraki MR26 is an EOL wireless access point featuring a
PoE ethernet port and two dual-band 3x3 MIMO 802.11n
radios and 1x1 dual-band WIFI dedicated to scanning.
Thank you Amir for the unit and PSU.
Hardware info:
SOC : Broadcom BCM53015A1KFEBG (dual-core Cortex-A9 CPU at 800 MHz)
RAM : SK Hynix Inc. H5TQ1G63EFR, 1 GBit DDR3 SDRAM = 128 MiB
NAND : Spansion S34ML01G100TF100, 1 GBit SLC NAND Flash = 128 MiB
ETH : 1 GBit Ethernet Port - PoE (TPS23754 PoE Interface)
WIFI0 : Broadcom BCM43431KMLG, BCM43431 802.11 abgn (3x3:3)
WIFI1 : Broadcom BCM43431KMLG, BCM43431 802.11 abgn (3x3:3)
WIFI2 : Broadcom BCM43428 "Air Marshal" 802.11 abgn (1x1:1)
BUTTON: One reset key behind a small hole next to the Ethernet Port
LEDS : One amber (fault), one white (indicator) LED, separate RGB-LED
MISC : Atmel AT24C64 8KiB EEPROM i2c
: Ti INA219 26V, 12-bit, i2c output current/voltage/power monitor
SERIAL:
WARNING: The serial port needs a TTL/RS-232 3V3 level converter!
The Serial setting is 115200-8-N-1. The board has a populated
right angle 1x4 0.1" pinheader.
The pinout is: VCC (next to J3, has the pin 1 indicator), RX, TX, GND.
Odd stuff:
- uboot does not support lzma compression, but gzip'd uImage/DTB work.
- uboot claims to support FIT, but fails to pass the DTB to the kernel.
Appending the dtb after the kernel image works.
- RGB-controller is supported through an external userspace program.
- The ubi partition contains a "board-config" volume. It stores the
MAC Address (0x66 in binary) and Serial No. (0x7c alpha-numerical).
- SoC's temperature sensor always reports that it is on fire.
This causes the system to immediately shutdown! Looking at reported
"418 degree Celsius" suggests that this sensor is not working.
WIFI:
b43 is able to initialize all three WIFIs @ 802.11bg.
| b43-phy0: Broadcom 43431 WLAN found (core revision 29)
| bcma-pci-bridge 0000:01:00.0: bus1: Switched to core: 0x812
| b43-phy0: Found PHY: Analog 9, Type 7 (HT), Revision 1
| b43-phy0: Found Radio: Manuf 0x17F, ID 0x2059, Revision 0, Version 1
| b43-phy0 warning: 5 GHz band is unsupported on this PHY
| b43-phy1: Broadcom 43431 WLAN found (core revision 29)
| bcma-pci-bridge 0001:01:00.0: bus2: Switched to core: 0x812
| b43-phy1: Found PHY: Analog 9, Type 7 (HT), Revision 1
| b43-phy1: Found Radio: Manuf 0x17F, ID 0x2059, Revision 0, Version 1
| b43-phy1 warning: 5 GHz band is unsupported on this PHY
| b43-phy2: Broadcom 43228 WLAN found (core revision 30)
| bcma-pci-bridge 0002:01:00.0: bus3: Switched to core: 0x812
| b43-phy2: Found PHY: Analog 9, Type 4 (N), Revision 16
| b43-phy2: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1
| Broadcom 43xx driver loaded [ Features: NL ]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The Ixora V1.2 carrier board adds SW relevant new features compared to
the V1.1 version.
- An I2C EEPROM is added.
- The SD card slot got a switchable 3.3V supply.
- Pull ups on the SD card signals are not assembled to faciliate 1.8V
speed modes.
- The CAN transceivers got a switchable 3.3V supply.
Add a new device tree and, as the differences are so small rework the
device tree for V1.1 to include the V1.2 device tree and adjust as
needed.
Drop adding the toradex,apalis_imx6q-ixora to the dtb compatible to
adhere to the binding yaml document.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add DTS for ARMv7 based broadband SoC BCM63148. bcm63148.dtsi is the SoC
description DTS header and bcm963148.dts is a simple DTS file for
Broadcom BCM963148 Reference board that only enable the UART port.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Add DTS for ARMv7 based broadband SoC BCM6756. bcm6756.dtsi is the SoC
description DTS header and bcm96756.dts is a simple DTS file for
Broadcom BCM96756 Reference board that only enable the UART port.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Add DTS for ARMv7 based broadband SoC BCM6855. bcm6855.dtsi is the SoC
description DTS header and bcm96855.dts is a simple DTS file for
Broadcom BCM96855 Reference board that only enable the UART port.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Add devicetree for the Google Chameleon v3 board.
Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The Mercury+ AA1 is not a standalone board, rather it's a module
with an Arria 10 SoC. Remove status = "okay" and i2c aliases, as they
are routed to the base board and should be enabled from there.
Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add DTS for ARMv7 based broadband SoC BCM6846. bcm6846.dtsi is the
SoC description DTS header and bcm96846.dts is a simple DTS file for
Broadcom BCM96846 Reference board that only enable the UART port.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
