summaryrefslogtreecommitdiffstats
path: root/Documentation
AgeCommit message (Collapse)AuthorFilesLines
2022-03-30Merge tag 'libnvdimm-for-5.18' of ↵Linus Torvalds2-318/+123
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The update for this cycle includes the deprecation of block-aperture mode and a new perf events interface for the papr_scm nvdimm driver. The perf events approach was acked by PeterZ. - Add perf support for nvdimm events, initially only for 'papr_scm' devices. - Deprecate the 'block aperture' support in libnvdimm, it only ever existed in the specification, not in shipping product" * tag 'libnvdimm-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm/blk: Fix title level MAINTAINERS: remove section LIBNVDIMM BLK: MMIO-APERTURE DRIVER powerpc/papr_scm: Fix build failure when drivers/nvdimm: Fix build failure when CONFIG_PERF_EVENTS is not set nvdimm/region: Delete nd_blk_region infrastructure ACPI: NFIT: Remove block aperture support nvdimm/namespace: Delete nd_namespace_blk nvdimm/namespace: Delete blk namespace consideration in shared paths nvdimm/blk: Delete the block-aperture window driver nvdimm/region: Fix default alignment for small regions docs: ABI: sysfs-bus-nvdimm: Document sysfs event format entries for nvdimm pmu powerpc/papr_scm: Add perf interface support drivers/nvdimm: Add perf interface to expose nvdimm performance stats drivers/nvdimm: Add nvdimm pmu structure
2022-03-30PCI/doc: cleanup references to the legacy PCI DMA APIChristoph Hellwig1-7/+7
Mention the regular DMA API calls instead of the now removed PCI DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2022-03-29dt-bindings: net: qcom,ethqos: Document SM8150 SoC compatibleVinod Koul1-1/+3
SM8150 has an ethernet controller and it needs a different configuration, so add a new compatible for this. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> [bhsharma: Massage the commit log] Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20220325200731.1585554-1-bhupesh.sharma@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-29Merge tag 'pm-5.18-rc1-2' of ↵Linus Torvalds13-1189/+954
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These update ARM cpufreq drivers, the OPP (Operating Performance Points) library and the power management documentation. Specifics: - Add per core DVFS support for QCom SoC (Bjorn Andersson), convert to yaml binding (Manivannan Sadhasivam) and various other fixes to the QCom drivers (Luca Weiss). - Add OPP table for imx7s SoC (Denys Drozdov) and minor fixes (Stefan Agner). - Fix CPPC driver's freq/performance conversions (Pierre Gondois). - Minor generic cleanups (Yury Norov). - Introduce opp-microwatt property to the OPP core, bindings, etc (Lukasz Luba). - Convert DT bindings to schema format and various related fixes (Yassine Oudjana). - Expose OPP's OF node in debugfs (Viresh Kumar). - Add Intel uncore frequency scaling documentation file to its MAINTAINERS entry (Srinivas Pandruvada). - Clean up the AMD P-state driver documentation (Jan Engelhardt)" * tag 'pm-5.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits) Documentation: amd-pstate: grammar and sentence structure updates dt-bindings: cpufreq: cpufreq-qcom-hw: Convert to YAML bindings dt-bindings: dvfs: Use MediaTek CPUFREQ HW as an example Documentation: EM: Describe new registration method using DT OPP: Add support of "opp-microwatt" for EM registration PM: EM: add macro to set .active_power() callback conditionally OPP: Add "opp-microwatt" supporting code dt-bindings: opp: Add "opp-microwatt" entry in the OPP MAINTAINERS: Add additional file to uncore frequency control cpufreq: blocklist Qualcomm sc8280xp and sa8540p in cpufreq-dt-platdev cpufreq: qcom-hw: Add support for per-core-dcvs dt-bindings: power: avs: qcom,cpr: Convert to DT schema arm64: dts: qcom: qcs404: Rename CPU and CPR OPP tables arm64: dts: qcom: msm8996: Rename cluster OPP tables dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema dt-bindings: opp: qcom-opp: Convert to DT schema arm64: dts: qcom: msm8996-mtp: Add msm8996 compatible dt-bindings: arm: qcom: Add msm8996 and apq8096 compatibles opp: Expose of-node's name in debugfs cpufreq: CPPC: Fix performance/frequency conversion ...
2022-03-29Documentation: KVM: add API issues sectionPaolo Bonzini1-0/+46
Add a section to document all the different ways in which the KVM API sucks. I am sure there are way more, give people a place to vent so that userspace authors are aware. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220322110712.222449-4-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-29Documentation: KVM: add virtual CPU errata documentationPaolo Bonzini2-0/+40
Add a file to document all the different ways in which the virtual CPU emulation is imperfect. Include an example to show how to document such errata. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Jim Mattson <jmattson@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Message-Id: <20220322110712.222449-3-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-29Documentation: KVM: add separate directories for architecture-specific ↵Paolo Bonzini15-19/+37
documentation ARM already has an arm/ subdirectory, but s390 and x86 do not even though they have a relatively large number of files specific to them. Create new directories in Documentation/virt/kvm for these two architectures as well. While at it, group the API documentation and the developer documentation in the table of contents. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220322110712.222449-2-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-29Documentation: kvm: include new locksPaolo Bonzini1-0/+15
kvm->mn_invalidate_lock and kvm->slots_arch_lock were not included in the documentation, add them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220322110720.222499-3-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-29Documentation: kvm: fixes for locking.rstPaolo Bonzini1-9/+19
Separate the various locks clearly, and include the new names of blocked_vcpu_on_cpu_lock and blocked_vcpu_on_cpu. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220322110720.222499-2-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-29Merge branches 'clk-sifive' and 'clk-visconti' into clk-nextStephen Boyd3-3/+3
* clk-sifive: clk: sifive: Move all stuff into SoCs header files from C files clk: sifive: Add SoCs prefix in each SoCs-dependent data riscv: dts: Change the macro name of prci in each device node dt-bindings: change the macro name of prci in header files and example clk: sifive: duplicate the macro definitions for the time being * clk-visconti: clk: visconti: prevent array overflow in visconti_clk_register_gates()
2022-03-29Merge branches 'clk-range', 'clk-uniphier', 'clk-apple' and 'clk-qcom' into ↵Stephen Boyd14-96/+549
clk-next - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range - Support for NCO blocks on Apple SoCs * clk-range: clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate clk: bcm: rpi: Run some clocks at the minimum rate allowed clk: bcm: rpi: Set a default minimum rate clk: bcm: rpi: Add variant structure clk: Add clk_drop_range clk: Always set the rate on clk_set_range_rate clk: Use clamp instead of open-coding our own clk: Always clamp the rounded rate clk: Enforce that disjoints limits are invalid clk: Introduce Kunit Tests for the framework clk: Fix clk_hw_get_clk() when dev is NULL * clk-uniphier: clk: uniphier: Fix fixed-rate initialization * clk-apple: clk: clk-apple-nco: Allow and fix module building MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE clk: clk-apple-nco: Add driver for Apple NCO dt-bindings: clock: Add Apple NCO * clk-qcom: (61 commits) clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: qcom: Add display clock controller driver for SM6125 dt-bindings: clock: add QCOM SM6125 display clock bindings clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig clk: qcom: gcc: Add emac GDSC support for SM8150 clk: qcom: gcc: sm8150: Fix some identation issues clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150 clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150 clk: qcom: clk-rcg2: Update the frac table for pixel clock clk: qcom: clk-rcg2: Update logic to calculate D value for RCG clk: qcom: smd: Add missing MSM8998 RPM clocks clk: qcom: smd: Add missing RPM clocks for msm8992/4 dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks clk: qcom: gcc-ipq806x: add CryptoEngine resets dt-bindings: reset: add ipq8064 ce5 resets clk: qcom: gcc-ipq806x: add CryptoEngine clocks dt-bindings: clock: add ipq8064 ce5 clk define clk: qcom: gcc-ipq806x: add additional freq for sdc table clk: qcom: clk-rcg: add clk_rcg_floor_ops ops ...
2022-03-29Merge branches 'clk-starfive', 'clk-ti', 'clk-terminate' and 'clk-cleanup' ↵Stephen Boyd1-0/+57
into clk-next - Audio clks on StarFive JH7100 RISC-V SoC - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments * clk-starfive: clk: starfive: Add JH7100 audio clock driver clk: starfive: jh7100: Support more clock types clk: starfive: jh7100: Make hw clock implementation reusable dt-bindings: clock: Add starfive,jh7100-audclk bindings dt-bindings: clock: Add JH7100 audio clock definitions clk: starfive: jh7100: Handle audio_div clock properly clk: starfive: jh7100: Don't round divisor up twice * clk-ti: clk: ti: Drop legacy compatibility clocks for dra7 clk: ti: Drop legacy compatibility clocks for am4 clk: ti: Drop legacy compatibility clocks for am3 clk: ti: Update component clocks to use ti_dt_clk_name() clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name() clk: ti: Add ti_dt_clk_name() helper to use clock-output-names clk: ti: Use clock-output-names for clkctrl clk: ti: Add ti_find_clock_provider() to use clock-output-names clk: ti: Optionally parse IO address from parent clock node clk: ti: Preserve node in ti_dt_clocks_register() clk: ti: Constify clkctrl_name * clk-terminate: clk: actions: Make sentinel elements more obvious clk: clps711x: Terminate clk_div_table with sentinel element clk: hisilicon: Terminate clk_div_table with sentinel element clk: loongson1: Terminate clk_div_table with sentinel element clk: actions: Terminate clk_div_table with sentinel element * clk-cleanup: clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments clk: COMMON_CLK_LAN966X should depend on SOC_LAN966 clk: Use of_device_get_match_data() clk: bcm2835: Remove unused variable clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver clk: cleanup comments clk: socfpga: cleanup spdx tags
2022-03-29Merge branches 'clk-mvebu', 'clk-const', 'clk-imx' and 'clk-rockchip' into ↵Stephen Boyd18-135/+122
clk-next - Mark mux table as const in clk-mux - Make the all_lists array const * clk-mvebu: clk: mvebu: use time_is_before_eq_jiffies() instead of open coding it * clk-const: clk: Mark clk_core_evict_parent_cache_subtree() 'target' const clk: Mark 'all_lists' as const clk: pistachio: Declare mux table as const u32[] clk: qcom: Declare mux table as const u32[] clk: mmp: Declare mux tables as const u32[] clk: hisilicon: Remove unnecessary cast of mux table to u32 * clk: mux: Declare u32 *table parameter as const clk: nxp: Declare mux table parameter as const u32 * clk: nxp: Remove unused variable * clk-imx: (28 commits) dt-bindings: clock: drop useless consumer example clk: imx: Select MXC_CLK for i.MX93 clock driver clk: imx: remove redundant re-assignment of pll->base MAINTAINERS: clk: imx: add git tree and dt-bindings files clk: imx: pll14xx: Support dynamic rates clk: imx: pll14xx: Add pr_fmt clk: imx: pll14xx: explicitly return lowest rate clk: imx: pll14xx: name variables after usage clk: imx: pll14xx: consolidate rate calculation clk: imx: pll14xx: Use FIELD_GET/FIELD_PREP clk: imx: pll14xx: Drop wrong shifting clk: imx: pll14xx: Use register defines consistently clk: imx8mp: remove SYS PLL 1/2 clock gates clk: imx8mn: remove SYS PLL 1/2 clock gates clk: imx8mm: remove SYS PLL 1/2 clock gates clk: imx: add i.MX93 clk clk: imx: support fracn gppll clk: imx: add i.MX93 composite clk dt-bindings: clock: add i.MX93 clock definition dt-bindings: clock: Add imx93 clock support ... * clk-rockchip: clk: rockchip: re-add rational best approximation algorithm to the fractional divider clk/rockchip: Use of_device_get_match_data() clk: rockchip: Add CLK_SET_RATE_PARENT to the HDMI reference clock on rk3568 clk: rockchip: drop CLK_SET_RATE_PARENT from dclk_vop* on rk3568 clk: rockchip: Add more PLL rates for rk3568
2022-03-29Merge branches 'clk-xilinx', 'clk-kunit', 'clk-cs2000' and 'clk-renesas' ↵Stephen Boyd5-28/+208
into clk-next - Kunit tests for clk-gate implementation - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode * clk-xilinx: clk: zynqmp: replace warn_once with pr_debug for failed clock ops * clk-kunit: clk: gate: Add some kunit test suites * clk-cs2000: clk: cs2000-cp: convert driver to regmap clk: cs2000-cp: freeze config during register fiddling clk: cs2000-cp: make clock skip setting configurable clk: cs2000-cp: add support for dynamic mode clk: cs2000-cp: Make aux output function controllable dt-bindings: clock: cs2000-cp: document cirrus,dynamic-mode dt-bindings: clock: cs2000-cp: document cirrus,clock-skip flag dt-bindings: clock: cs2000-cp: document aux-output-source dt-bindings: clock: convert cs2000-cp bindings to yaml * clk-renesas: dt-bindings: clock: renesas: Make example 'clocks' parsable clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: renesas: r8a779f0: Add PFC clock clk: renesas: r8a779f0: Add I2C clocks clk: renesas: r8a779f0: Add WDT clock clk: renesas: r8a779f0: Fix RSW2 clock divider clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC dt-bindings: clock: renesas: Document RZ/V2L SoC dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions clk: renesas: r8a779a0: Add CANFD module clock clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3 clk: renesas: r8a7799[05]: Add MLP clocks clk: renesas: r8a779f0: Add SYS-DMAC clocks
2022-03-29Merge branches 'clk-microchip', 'clk-si', 'clk-mtk', 'clk-at91' and 'clk-st' ↵Stephen Boyd1-0/+58
into clk-next - Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code * clk-microchip: clk: microchip: Add driver for Microchip PolarFire SoC dt-bindings: clk: microchip: Add Microchip PolarFire host binding * clk-si: clk-si5341: replace snprintf in show functions with sysfs_emit clk: si5341: fix reported clk_rate when output divider is 2 * clk-mtk: (32 commits) clk: mediatek: Warn if clk IDs are duplicated clk: mediatek: mt8195: Implement remove functions clk: mediatek: mt8195: Implement error handling in probe functions clk: mediatek: mt8195: Hook up mtk_clk_simple_remove() clk: mediatek: Unregister clks in mtk_clk_simple_probe() error path clk: mediatek: mtk: Implement error handling in register APIs clk: mediatek: pll: Implement error handling in register API clk: mediatek: mux: Implement error handling in register API clk: mediatek: mux: Reverse check for existing clk to reduce nesting level clk: mediatek: gate: Implement error handling in register API clk: mediatek: cpumux: Implement error handling in register API clk: mediatek: mtk: Clean up included headers clk: mediatek: Add mtk_clk_simple_remove() clk: mediatek: Implement mtk_clk_unregister_composites() API clk: mediatek: Implement mtk_clk_unregister_divider_clks() API clk: mediatek: Implement mtk_clk_unregister_factors() API clk: mediatek: Implement mtk_clk_unregister_fixed_clks() API clk: mediatek: pll: Clean up included headers clk: mediatek: pll: Implement unregister API clk: mediatek: pll: Split definitions into separate header file ... * clk-at91: clk: at91: clk-master: remove dead code clk: at91: sama7g5: fix parents of PDMCs' GCLK clk: at91: sama7g5: Allow MCK1 to be exported and referenced in DT clk: at91: allow setting PMC_AUDIOPINCK clock parents via DT * clk-st: clk: stm32mp1: Add parent_data to ETHRX clock clk: stm32mp1: Split ETHCK_K into separate MUX and GATE clock
2022-03-29Merge branch 'pm-docs'Rafael J. Wysocki1-68/+67
Merge additional power management documentation udates for 5.18-rc1: - Add Intel uncore frequency scaling documentation file to its MAINTAINERS entry (Srinivas Pandruvada). - Clean up the AMD P-state driver documentation (Jan Engelhardt). * pm-docs: Documentation: amd-pstate: grammar and sentence structure updates MAINTAINERS: Add additional file to uncore frequency control
2022-03-29Merge branch 'pm-opp'Rafael J. Wysocki10-946/+691
Merge OPP (Operating Performance Points) changes for 5.18-rc1. * pm-opp: Documentation: EM: Describe new registration method using DT OPP: Add support of "opp-microwatt" for EM registration PM: EM: add macro to set .active_power() callback conditionally OPP: Add "opp-microwatt" supporting code dt-bindings: opp: Add "opp-microwatt" entry in the OPP dt-bindings: power: avs: qcom,cpr: Convert to DT schema arm64: dts: qcom: qcs404: Rename CPU and CPR OPP tables arm64: dts: qcom: msm8996: Rename cluster OPP tables dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema dt-bindings: opp: qcom-opp: Convert to DT schema arm64: dts: qcom: msm8996-mtp: Add msm8996 compatible dt-bindings: arm: qcom: Add msm8996 and apq8096 compatibles opp: Expose of-node's name in debugfs
2022-03-28dt-bindings: Fix missing '/schemas' in $ref pathsRob Herring8-9/+9
Absolute paths in $ref should always begin with '/schemas'. The tools mostly work with it omitted, but for correctness the path should be everything except the hostname as that is taken from the schema's $id value. This scheme is defined in the json-schema spec. Cc: Hector Martin <marcan@marcan.st> Cc: Sven Peter <sven@svenpeter.dev> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mukesh Savaliya <msavaliy@codeaurora.org> Cc: Akash Asthana <akashast@codeaurora.org> Cc: Bayi Cheng <bayi.cheng@mediatek.com> Cc: Chuanhong Guo <gch981213@gmail.com> Cc: Min Guo <min.guo@mediatek.com> Cc: netdev@vger.kernel.org Cc: linux-spi@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Mark Brown <broonie@debian.org> Link: https://lore.kernel.org/r/20220325215652.525383-1-robh@kernel.org
2022-03-28dt-bindings: media: mediatek,vcodec: Fix addressing cell sizesRob Herring1-58/+64
'dma-ranges' in the example is written for cell sizes of 2 cells, but the schema and example specify sizes of 1 cell. As the h/w has a bus address of >32-bits, cell sizes of 2 is correct. Update the schema's '#address-cells' and '#size-cells' to be 2 and adjust the example throughout. There's no error currently because dtc only checks 'dma-ranges' is a correct multiple number of cells (3) and the schema checking is based on bracketing of entries. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220301233501.2110047-1-robh@kernel.org
2022-03-28dt-bindings: net: snps,dwmac: modify available values of PBLBiao Huang1-3/+3
PBL can be any of the following values: 1, 2, 4, 8, 16 or 32 according to the datasheet, so modify available values of PBL in snps,dwmac.yaml. Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220324012112.7016-2-biao.huang@mediatek.com
2022-03-28dt-bindings: display: mediatek: Fix examples on new bindingsAngeloGioacchino Del Regno17-134/+260
To avoid failure of dt_binding_check perform a slight refactoring of the examples: the main block is kept, but that required fixing the address and size cells, plus the inclusion of missing dt-bindings headers, required to parse some of the values assigned to various properties. Fixes: 4ed545e7d100 ("dt-bindings: display: mediatek: disp: split each block to individual yaml") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Tested-by: jason-jh.lin <jason-jh.lin@medaitek.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220309134702.9942-5-jason-jh.lin@mediatek.com
2022-03-28dt-bindings: display: mediatek, ovl: Fix 'iommu' required property typoAngeloGioacchino Del Regno1-1/+1
The property is called 'iommus' and not 'iommu'. Fix this typo. Fixes: 4ed545e7d100 ("dt-bindings: display: mediatek: disp: split each block to individual yaml") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220309134702.9942-4-jason-jh.lin@mediatek.com
2022-03-28dt-bindings: display: mediatek, mutex: Fix mediatek, gce-events typeAngeloGioacchino Del Regno1-1/+1
The mediatek,gce-events property needs as value an array of uint32 corresponding to the CMDQ events to listen to, and not any phandle. Fixes: 4ed545e7d100 ("dt-bindings: display: mediatek: disp: split each block to individual yaml") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220309134702.9942-3-jason-jh.lin@mediatek.com
2022-03-28Revert "dt-bindings: display: mediatek: add ethdr definition for mt8195"jason-jh.lin1-147/+0
This reverts commit e7dcfe64204a5cd9a74a9ca7d9c7a22434dc7fe5. Because examples property of mediatek,ethdr.yaml should base on [1][2]. Reverting it until [1][2] are applied. [1] dt-bindings: mediatek: mt8195: Add binding for MM IOMMU https://patchwork.kernel.org/project/linux-mediatek/patch/20220217113453.13658-2-yong.wu@mediatek.com/ [2] dt-bindings: reset: mt8195: add vdosys1 reset control bit https://patchwork.kernel.org/project/linux-mediatek/patch/20220222100741.30138-5-nancy.lin@mediatek.com/ Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220309134702.9942-2-jason-jh.lin@mediatek.com
2022-03-28Documentation: kunit: Fix cross-referencing warningsDavid Gow1-11/+2
The Architecture chapter of the KUnit documentation tried to include copies of the kernel-doc for a couple of things, despite these already existing in the API documentation. This lead to some warnings: architecture:31: ./include/kunit/test.h:3: WARNING: Duplicate C declaration, also defined at dev-tools/kunit/api/test:66. Declaration is '.. c:struct:: kunit_case'. architecture:163: ./include/kunit/test.h:1217: WARNING: Duplicate C declaration, also defined at dev-tools/kunit/api/test:1217. Declaration is '.. c:macro:: KUNIT_ARRAY_PARAM'. architecture.rst:3: WARNING: Duplicate C declaration, also defined at dev-tools/kunit/api/test:66. Declaration is '.. c:struct:: kunit_case'. architecture.rst:1217: WARNING: Duplicate C declaration, also defined at dev-tools/kunit/api/test:1217. Declaration is '.. c:macro:: KUNIT_ARRAY_PARAM'. Get rid of these, and cleanup the mentions of the struct and macro in question so that sphinx generates a link to the existing copy of the documentation in the api/test document. Fixes: bc145b370c11 ("Documentation: KUnit: Added KUnit Architecture") Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Tested-by: Brendan Higgins <brendanhiggins@google.com> Link: https://lore.kernel.org/r/20220326054414.637293-1-davidgow@google.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-03-28Merge tag 'tty-5.18-rc1' of ↵Linus Torvalds8-11/+135
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver changes for 5.18-rc1. Nothing major, some more good cleanups from Jiri and 2 new serial drivers. Highlights include: - termbits cleanups - export symbol cleanups and other core cleanups from Jiri Slaby - new sunplus and mvebu uart drivers (amazing that people are still creating new uarts...) - samsung serial driver cleanups - ldisc 29 is now "reserved" for experimental/development line disciplines - lots of other tiny fixes and cleanups to serial drivers and bindings All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (104 commits) vt_ioctl: fix potential spectre v1 in VT_DISALLOCATE serial: 8250: fix XOFF/XON sending when DMA is used tty: serial: samsung: Add ARTPEC-8 support dt-bindings: serial: samsung: Add ARTPEC-8 UART serial: sc16is7xx: Clear RS485 bits in the shutdown tty: serial: samsung: simplify getting OF match data tty: serial: samsung: constify variables and pointers tty: serial: samsung: constify s3c24xx_serial_drv_data members tty: serial: samsung: constify UART name tty: serial: samsung: constify s3c24xx_serial_drv_data tty: serial: samsung: reduce number of casts tty: serial: samsung: embed s3c2410_uartcfg in parent structure tty: serial: samsung: embed s3c24xx_uart_info in parent structure serial: 8250_tegra: mark acpi_device_id as unused with !ACPI tty: serial: bcm63xx: use more precise Kconfig symbol serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUS tty: serial: jsm: fix two assignments in if conditions tty: serial: jsm: remove redundant assignments to variable linestatus serial: 8250_mtk: make two read-only arrays static const serial: samsung_tty: do not unlock port->lock for uart_write_wakeup() ...
2022-03-28scripts/kernel-doc: change the line number meta infoMauro Carvalho Chehab1-1/+1
In order to make it more standard and ReST compatible, change the meta-tag used with --enable-lineno from: #define LINENO to .. LINENO In practice, no functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/40725032b5a4a33db740bf1de397523af958ff8a.1648290305.git.mchehab@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-03-28scripts/get_abi: change the file/line number meta infoMauro Carvalho Chehab1-1/+1
In order to make it more standard and ReST compatible, change the meta-tag used with --enable-lineno from: #define LINENO to .. LINENO In practice, no functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/125ffd31fbc77ad9eee4d6906e1830b8162fa6ca.1648290305.git.mchehab@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-03-28docs: kernel_include.py: add sphinx build dependenciesMauro Carvalho Chehab1-0/+3
The files included by kernel-include should be added as build dependencies, in order for sphinx-build to rebuild the corresponding docs if any changes at the included file happens. Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/d30fc4fa422a13b7e1623d690945c46b58a55e79.1648290305.git.mchehab@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-03-28docs: kernel_abi.py: add sphinx build dependenciesMauro Carvalho Chehab1-0/+4
Ensure that Sphinx-build will handle the files parsed by get_abi.pl as dependencies. This way, if they are touched, the ABI output will be regenerated. Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/10bc3d3bc74f514a539cd3b48b9d287d2b6f99e2.1648290305.git.mchehab@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-03-28docs: kernel_feat.py: add build dependenciesMauro Carvalho Chehab1-2/+18
Ensure that the feature files will be regenerated if any changes happen at the Documentation/features files that were processed by gen_feat.pl. Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/5cdf7a8300019129dcc09d4c2557f75908754445.1648290305.git.mchehab@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-03-28docs: kfigure.py: Don't warn of missing PDF converter in 'make htmldocs'Akira Yokosawa1-3/+5
SVG -> PDF conversion is not required in "make htmldocs". It is pointless to always warn of a missing converter. Demote the log message in setupTools() to verbose. For "make pdfdocs" (or "make latexdocs"), promote the dynamic message of "include SVG raw" to a warn. Expand the message and recommend installing Inkscape or ImageMagick. Fixes: 8ccd05697a9d ("docs: sphinx/kfigure.py: Use inkscape(1) for SVG -> PDF conversion") Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-doc@vger.kernel.org Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/c80e1481-10d4-7151-fe59-e846259eb0d4@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-03-28Merge tag 'staging-5.18-rc1' of ↵Linus Torvalds2-0/+149
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big set of staging driver updates for 5.18-rc1. Loads of tiny cleanups for almost all staging drivers in here, nothing major at all. Highlights include: - remove the ashmem Android driver. It is long-dead and if there are any legacy userspace applications still using it, the Android kernel images will maintain it, the community shouldn't care about it anymore - wfx wifi driver major cleanups. Should be ready to merge out of staging soon, and will coordinate with the wifi maintainers after -rc1 is out - major cleanups and unwinding of the layers of the r8188eu driver. It's amazing just how many unneeded layers of abstraction is in there, just when we think it's done, another is found... - lots of tiny coding style cleanups in many other staging drivers. All have been in linux-next for a while with no reported problems" * tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (455 commits) staging: r8188eu: remove unnecessary memset in r8188eu staging: greybus: introduce pwm_ops::apply staging: rts5208: Resolve checkpatch.pl issues. staging: sm750fb: fix naming style staging: fbtft: Consider type of init sequence values in fbtft_init_display() staging: fbtft: Constify buf parameter in fbtft_dbg_hex() staging: mmal-vchiq: clear redundant item named bulk_scratch mips: dts: ralink: add MT7621 SoC staging: r8188eu: remove some unused local ieee80211 macros staging: r8188eu: make rtl8188e_process_phy_info static staging: r8188eu: remove unused function prototype staging: r8188eu: remove three unused receive defines staging: r8188eu: remove unnecessary initializations staging: rtl8192e: Fix spelling mistake "RESQUEST" -> "REQUEST" MAINTAINERS: remove the obsolete file entry for staging in ANDROID DRIVERS staging: r8188eu: proper error handling in rtw_init_drv_sw staging: r8188eu: call _cancel_timer_ex from _rtw_free_recv_priv staging: vt6656: Removed unused variable vt3342_vnt_threshold staging: vt6656: Removed unused variable bb_vga_0 staging: remove ashmem ...
2022-03-28Merge tag 'driver-core-5.18-rc1' of ↵Linus Torvalds1-6/+26
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.18-rc1. Not much here, primarily it was a bunch of cleanups and small updates: - kobj_type cleanups for default_groups - documentation updates - firmware loader minor changes - component common helper added and take advantage of it in many drivers (the largest part of this pull request). All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits) Documentation: update stable review cycle documentation drivers/base/dd.c : Remove the initial value of the global variable Documentation: update stable tree link Documentation: add link to stable release candidate tree devres: fix typos in comments Documentation: add note block surrounding security patch note samples/kobject: Use sysfs_emit instead of sprintf base: soc: Make soc_device_match() simpler and easier to read driver core: dd: fix return value of __setup handler driver core: Refactor sysfs and drv/bus remove hooks driver core: Refactor multiple copies of device cleanup scripts: get_abi.pl: Fix typo in help message kernfs: fix typos in comments kernfs: remove unneeded #if 0 guard ALSA: hda/realtek: Make use of the helper component_compare_dev_name video: omapfb: dss: Make use of the helper component_compare_dev power: supply: ab8500: Make use of the helper component_compare_dev ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of iommu/mediatek: Make use of the helper component_compare/release_of drm: of: Make use of the helper component_release_of ...
2022-03-28Merge tag 'char-misc-5.18-rc1' of ↵Linus Torvalds69-369/+2907
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...
2022-03-28Merge tag 'pinctrl-v5.18-1' of ↵Linus Torvalds20-28/+1235
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "No core changes this time. Just new driver code and improvements! New drivers: - New driver for the Broadcom BCM4908 SoC. - New subdriver for Tesla FSD (Full Self Driving) SoC, a derivative of the Samsung Exynos pin control driver. - New driver for the Amlogic Meson S4 SoC. - New driver for the Sunplus SP7021 SoC. - New driver for the Microsemi Ocelot family ServalT SoC. - New subdriver for Intel Alder Lake-M SoC. - New subdriver for Intel Ice Lake-N SoC, including PCH support. - New subdriver for Renesas R8A779F0 SoC. - New subdriver for Mediatek MT8186 SoC. - New subdriver for NXP Freescale i.MX93 SoC. - New driver for Nuvoton WPCM450 SoC. - New driver for Qualcomm SC8280XP SoC. Improvements: - Wakeup support on Samsung Exynos850 and ExynosAutov9. - Serious and voluminous maintenance cleanup and refactoring in the Renesas drivers. Mainly sharing similar data between the different SoC subdrivers. - Qualcomm SM8450 EGPIO support. - Drive strength support on the Mediatek MT8195. - Add some missing groups and functions to the Ralink RT2880" * tag 'pinctrl-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (188 commits) pinctrl: mediatek: common-v1: fix semicolon.cocci warnings pinctrl: nuvoton: wpcm450: Fix build error without OF pinctrl: qcom-pmic-gpio: Add support for pm8450 dt-bindings: pinctrl: aspeed: Update gfx node in example dt-bindings: pinctrl: rt2880: add missing pin groups and functions pinctrl: ingenic: Fix regmap on X series SoCs pinctrl: nuvoton: Fix return value check in wpcm450_gpio_register() pinctrl: nuvoton: wpcm450: off by one in wpcm450_gpio_register() pinctrl: nuvoton: wpcm450: select GENERIC_PINCTRL_GROUPS pinctrl: nuvoton: Fix sparse warning pinctrl: mediatek: mt8186: Account for probe refactoring pinctrl: mediatek: common-v1: Commonize spec_ies_smt_set callback pinctrl: mediatek: common-v1: Commonize spec_pupd callback pinctrl: mediatek: common-v1: Use common probe function pinctrl: mediatek: common-v1: Add common probe function pinctrl: mediatek: paris: Unify probe function by using OF match data pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe pinctrl: berlin: fix error return code of berlin_pinctrl_build_state() pinctrl: qcom: Introduce sc8280xp TLMM driver ...
2022-03-28Reinstate some of "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""Linus Torvalds1-8/+0
Halil Pasic points out [1] that the full revert of that commit (revert in bddac7c1e02b), and that a partial revert that only reverts the problematic case, but still keeps some of the cleanups is probably better.  And that partial revert [2] had already been verified by Oleksandr Natalenko to also fix the issue, I had just missed that in the long discussion. So let's reinstate the cleanups from commit aa6f8dcbab47 ("swiotlb: rework "fix info leak with DMA_FROM_DEVICE""), and effectively only revert the part that caused problems. Link: https://lore.kernel.org/all/20220328013731.017ae3e3.pasic@linux.ibm.com/ [1] Link: https://lore.kernel.org/all/20220324055732.GB12078@lst.de/ [2] Link: https://lore.kernel.org/all/4386660.LvFx2qVVIh@natalenko.name/ [3] Suggested-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Christoph Hellwig" <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-27Merge tag 'mailbox-v5.18' of ↵Linus Torvalds4-4/+90
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: "qcom: - add support for MSM8976 mtk: - enable mt8186 - add ADSP controller driver ti: - use poll mode during suspend tegra: - fix tx channel flush imx: - add i.MX8 SECO MU support - prepare for, and add iMX93 support" * tag 'mailbox-v5.18' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: add definition for mt8186 mailbox: ti-msgmgr: Operate mailbox in polled mode during system suspend mailbox: ti-msgmgr: Refactor message read during interrupt handler mailbox: imx: support i.MX93 S401 MU mailbox: imx: support dual interrupts mailbox: imx: extend irq to an array dt-bindings: mailbox: imx-mu: add i.MX93 S4 MU support dt-bindings: mailbox: imx-mu: add i.MX93 MU mailbox: imx: add i.MX8 SECO MU support mailbox: imx: introduce rxdb callback dt-bindings: mailbox: imx-mu: add i.MX8 SECO MU support mailbox: imx: enlarge timeout while reading/writing messages to SCFW mailbox: imx: fix crash in resume on i.mx8ulp mailbox: imx: fix wakeup failure from freeze mode mailbox: mediatek: add support for adsp mailbox controller dt-bindings: mailbox: mtk,adsp-mbox: add mtk adsp-mbox document mailbox: qcom-apcs-ipc: Add compatible for MSM8976 SoC dt-bindings: mailbox: Add compatible for the MSM8976 mailbox: tegra-hsp: Flush whole channel
2022-03-27Merge tag 'leds-5.18-rc1' of ↵Linus Torvalds2-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "Nothing major here, there are two drivers that need review and did not make it into this round" * tag 'leds-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: pca955x: Allow zero LEDs to be specified leds: pca955x: Make the gpiochip always expose all pins leds: simatic-ipc-leds: Don't directly deref ioremap_resource() returned ptr leds: simatic-ipc-leds: Make simatic_ipc_led_mem_res static leds: lm3692x: Return 0 from remove callback leds: sgm3140: Add ocs,ocp8110 compatible dt-bindings: vendor-prefixes: Add ocs prefix dt-bindings: leds: common: fix unit address in max77693 example
2022-03-27dt-bindings: watchdog: renesas-wdt: Document r8a779f0 supportThanh Quan1-0/+5
Document support for the Watchdog Timer (WDT) Controller in the Renesas R-Car S4-8 (R8A779F0) SoC. Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/cca61a83ae82ecf5c23eb28e30c39f2f661f0e02.1642525158.git.geert+renesas@glider.be Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-26Merge tag 'usb-5.18-rc1' of ↵Linus Torvalds18-131/+617
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 5.18-rc1. Nothing major in here, just lots of little improvements and cleanups and new device support. Highlights are: - list iterator fixups for when we walk past the end of the list (a common problem that was cut/pasted in almost all USB gadget drivers) - xen USB driver "hardening" for malicious hosts - xhci driver updates and fixes for more hardware types - xhci debug cable fixes to make it actually work again - usb gadget audio driver improvements - usb gadget storage fixes to work with OS-X - lots of other small usb gadget fixes and updates - USB DWC3 driver improvements for more hardware types - Lots of other small USB driver improvements - DTS updates for some USB platforms All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue() dt-bindings: usb: mtk-xhci: add compatible for mt8186 usb: dwc3: Issue core soft reset before enabling run/stop usb: gadget: Makefile: remove ccflags-y USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c usb: gadget: eliminate anonymous module_init & module_exit usb: usbip: eliminate anonymous module_init & module_exit xen/usb: harden xen_hcd against malicious backends usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue usb: dwc3: gadget: move cmd_endtransfer to extra function usb: dwc3: gadget: ep_queue simplify isoc start condition xen/usb: don't use arbitrary_virt_to_machine() usb: isp1760: remove redundant max_packet() macro usb: oxu210hp-hcd: remove redundant call to max_packet() macro usb: common: usb-conn-gpio: Make VBUS supply completely optional USB: storage: ums-realtek: fix error code in rts51x_read_mem() usb: early: xhci-dbc: Fix xdbc number parsing usb: early: xhci-dbc: Remove duplicate keep parsing x86/tsc: Be consistent about use_tsc_delay() usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body ...
2022-03-26Merge branch 'i2c/for-mergewindow' of ↵Linus Torvalds6-1/+107
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - tracepoints when Linux acts as an I2C client - added support for AMD PSP - whole subsystem now uses generic_handle_irq_safe() - piix4 driver gained MMIO access enabling so far missed controllers with AMD chipsets - a bulk of device driver updates, refactorization, and fixes. * 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (61 commits) i2c: mux: demux-pinctrl: do not deactivate a master that is not active i2c: meson: Fix wrong speed use from probe i2c: add tracepoints for I2C slave events i2c: designware: Remove code duplication i2c: cros-ec-tunnel: Fix syntax errors in comments MAINTAINERS: adjust XLP9XX I2C DRIVER after removing the devicetree binding i2c: designware: Mark dw_i2c_plat_{suspend,resume}() as __maybe_unused i2c: mediatek: Add i2c compatible for Mediatek MT8168 dt-bindings: i2c: update bindings for MT8168 SoC i2c: mt65xx: Simplify with clk-bulk i2c: i801: Drop two outdated comments i2c: xiic: Make bus names unique i2c: i801: Add support for the Process Call command i2c: i801: Drop useless masking in i801_access i2c: tegra: Add SMBus block read function i2c: designware: Use the i2c_mark_adapter_suspended/resumed() helpers i2c: designware: Lock the adapter while setting the suspended flag i2c: mediatek: remove redundant null check i2c: mediatek: modify bus speed calculation formula i2c: designware: Fix improper usage of readl ...
2022-03-26Merge tag 'devicetree-for-5.18' of ↵Linus Torvalds191-1924/+4000
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Add Krzysztof Kozlowski as co-maintainer for DT bindings providing much needed help. - DT schema validation now takes DTB files as input rather than intermediate YAML files. This decouples the validation from the source level syntax information. There's a bunch of schema fixes as a result of switching to DTB based validation which exposed some errors and incomplete schemas and examples. - Kbuild improvements to explicitly warn users running 'make dt_binding_check' on missing yamllint - Expand DT_SCHEMA_FILES kbuild variable to take just a partial filename or path instead of the full path to 1 file. - Convert various bindings to schema format: mscc,vsc7514-switch, multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma, msm/mdp4, rda,8810pl-uart - New schemas for u-boot environment variable partition, TI clksel - New compatible strings for Renesas RZ/V2L SoC - Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated HiSilicon - Add/fix schemas for QEMU Arm 'virt' machine - Drop unused of_alias_get_alias_list() function - Add a script to check DT unittest EXPECT message output. Pass messages also now print by default at PR_INFO level to help test automation. * tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (96 commits) dt-bindings: kbuild: Make DT_SCHEMA_LINT a recursive variable dt-bindings: nvmem: add U-Boot environment variables binding dt-bindings: ufs: qcom: Add SM6350 compatible string dt-bindings: dmaengine: sifive,fu540-c000: include generic schema dt-bindings: gpio: pca95xx: drop useless consumer example Revert "of: base: Introduce of_alias_get_alias_list() to check alias IDs" dt-bindings: virtio,mmio: Allow setting devices 'dma-coherent' dt-bindings: gnss: Add two more chips dt-bindings: gnss: Rewrite sirfstar binding in YAML dt-bindings: gnss: Modify u-blox to use common bindings dt-bindings: gnss: Rewrite common bindings in YAML dt-bindings: ata: ahci-platform: Add rk3568-dwc-ahci compatible dt-bindings: ata: ahci-platform: Add power-domains property dt-bindings: ata: ahci-platform: Convert DT bindings to yaml dt-bindings: kbuild: Use DTB files for validation dt-bindings: kbuild: Pass DT_SCHEMA_FILES to dt-validate dt-bindings: Add QEMU virt machine compatible dt-bindings: arm: Convert QEMU fw-cfg to DT schema dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list dt-bindings: i2c: convert i2c-at91 to json-schema ...
2022-03-26Revert "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""Linus Torvalds1-0/+8
This reverts commit aa6f8dcbab473f3a3c7454b74caa46d36cdc5d13. It turns out this breaks at least the ath9k wireless driver, and possibly others. What the ath9k driver does on packet receive is to set up the DMA transfer with: int ath_rx_init(..) .. bf->bf_buf_addr = dma_map_single(sc->dev, skb->data, common->rx_bufsize, DMA_FROM_DEVICE); and then the receive logic (through ath_rx_tasklet()) will fetch incoming packets static bool ath_edma_get_buffers(..) .. dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr, common->rx_bufsize, DMA_FROM_DEVICE); ret = ath9k_hw_process_rxdesc_edma(ah, rs, skb->data); if (ret == -EINPROGRESS) { /*let device gain the buffer again*/ dma_sync_single_for_device(sc->dev, bf->bf_buf_addr, common->rx_bufsize, DMA_FROM_DEVICE); return false; } and it's worth noting how that first DMA sync: dma_sync_single_for_cpu(..DMA_FROM_DEVICE); is there to make sure the CPU can read the DMA buffer (possibly by copying it from the bounce buffer area, or by doing some cache flush). The iommu correctly turns that into a "copy from bounce bufer" so that the driver can look at the state of the packets. In the meantime, the device may continue to write to the DMA buffer, but we at least have a snapshot of the state due to that first DMA sync. But that _second_ DMA sync: dma_sync_single_for_device(..DMA_FROM_DEVICE); is telling the DMA mapping that the CPU wasn't interested in the area because the packet wasn't there. In the case of a DMA bounce buffer, that is a no-op. Note how it's not a sync for the CPU (the "for_device()" part), and it's not a sync for data written by the CPU (the "DMA_FROM_DEVICE" part). Or rather, it _should_ be a no-op. That's what commit aa6f8dcbab47 broke: it made the code bounce the buffer unconditionally, and changed the DMA_FROM_DEVICE to just unconditionally and illogically be DMA_TO_DEVICE. [ Side note: purely within the confines of the swiotlb driver it wasn't entirely illogical: The reason it did that odd DMA_FROM_DEVICE -> DMA_TO_DEVICE conversion thing is because inside the swiotlb driver, it uses just a swiotlb_bounce() helper that doesn't care about the whole distinction of who the sync is for - only which direction to bounce. So it took the "sync for device" to mean that the CPU must have been the one writing, and thought it meant DMA_TO_DEVICE. ] Also note how the commentary in that commit was wrong, probably due to that whole confusion, claiming that the commit makes the swiotlb code "bounce unconditionally (that is, also when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale data from the swiotlb buffer" which is nonsensical for two reasons: - that "also when dir == DMA_TO_DEVICE" is nonsensical, as that was exactly when it always did - and should do - the bounce. - since this is a sync for the device (not for the CPU), we're clearly fundamentally not coping back stale data from the bounce buffers at all, because we'd be copying *to* the bounce buffers. So that commit was just very confused. It confused the direction of the synchronization (to the device, not the cpu) with the direction of the DMA (from the device). Reported-and-bisected-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Olha Cherevyk <olha.cherevyk@gmail.com> Cc: Halil Pasic <pasic@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Kalle Valo <kvalo@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Toke Høiland-Jørgensen <toke@toke.dk> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25Merge tag 'for-linus-5.17-1' of https://github.com/cminyard/linux-ipmiLinus Torvalds1-0/+8
Pull IPMI updates from Corey Minyard: - Little fixes for various things people have noticed. - One enhancement, the IPMI over IPMB (I2c) is modified to allow it to take a separate sender and receiver device. The Raspberry Pi has an I2C slave device that cannot send. * tag 'for-linus-5.17-1' of https://github.com/cminyard/linux-ipmi: ipmi: initialize len variable ipmi: kcs: aspeed: Remove old bindings support ipmi:ipmb: Add the ability to have a separate slave and master device ipmi:ipmi_ipmb: Unregister the SMI on remove ipmi: kcs: aspeed: Add AST2600 compatible string ipmi: ssif: replace strlcpy with strscpy ipmi/watchdog: Constify ident ipmi: Add the git repository to the MAINTAINERS file
2022-03-25Merge tag 'backlight-next-5.18' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "New Device Support: - Add support for PM6150L to Qualcomm WLED Fix-ups" - Use kcalloc() to avoid open-coding; pwm_bl - Device Tree changes; qcom-wled - Cleanup or simplify code; backlight" * tag 'backlight-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: backlight: Slighly simplify devm_of_find_backlight() backlight: qcom-wled: Add PM6150L compatible dt-bindings: backlight: qcom-wled: Add PM6150L compatible backlight: pwm_bl: Avoid open coded arithmetic in memory allocation
2022-03-25Merge tag 'mfd-next-5.18' of ↵Linus Torvalds18-549/+1181
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for Maxim MAX77714 PMIC Removed Drivers: - Remove support for ST-Ericsson AB8500 DebugFS New Device Support: - Add support for Silergy SY7636A to Simple MFD I2C - Add support for MediaTek MT6366 PMIC to MT6358 IRQ - Add support for Charger to Intel PMIC CRC - Add support for Raptor Lake to Intel LPSS PCI New Functionality: - Add support for Reboot to Rockchip RK808 Fix-ups: - Device Tree changes (includcing YAML conversion) for silergy,sy7636a, maxim,max77843, google,cros-ec, maxim,max14577, maxim,max77802, maxim,max77714, qcom,tcsr, qcom,spmi-pmic, stericsson,ab8500, stericsson,db8500-prcmu, samsung,exynos5433-lpass, mt6397, syscon, brcm,cru - Visible to menuconfig; simple-mfd-i2c - Clean-up or clarify code; max77686, intel_soc_pmic_crc - Improve error handling; mc13xxx-core, stmfx, asic3 - Pass device information to child devices; iqs62x, intel-lpss-acpi - Individually identify IRQ domains; intel_soc_pmic_core - Remove superfluous code; dbx500-prcmu, exynos-lpass - Staticify and constify; arizona-i2c - Mark sometimes used data as __maybe_unused; atmel-flexcom - Account for different ACPI tables on AOSP/Windows platforms; arizona-spi - Use provided (platform) APIs; ab8500-core - Trivial (whitespace, spelling); rohm-bd9576" * tag 'mfd-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits) dt-bindings: mfd: syscon: Add microchip,lan966x-cpu-syscon compatible mfd: bd9576: fix typos in comments mfd: Use platform_get_irq() to get the interrupt mfd: db8500-prcmu: Remove unused inline function mfd: arizona-spi: Add Android board ACPI table handling mfd: arizona-spi: Split Windows ACPI init code into its own function mfd: asic3: Add missing iounmap() on error asic3_mfd_probe MAINTAINERS: Rectify entry for ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS mfd: intel-lpss: Provide an SSP type to the driver dt-bindings: mfd: brcm,cru: Rename pinctrl node dt-bindings: Add compatibles for undocumented trivial syscons mfd: atmel-flexcom: Fix compilation warning dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema mfd: exynos-lpass: Drop unneeded syscon.h include mfd: intel-lpss: Add Intel Raptor Lake PCH-S PCI IDs mfd: ab8500: Drop debugfs module mfd: sta2x11: Use GFP_KERNEL instead of GFP_ATOMIC mfd: ab8500: Rewrite bindings in YAML mfd: qcom-spmi-pmic: Add pm8953 compatible ...
2022-03-25Merge tag 'mtd/changes-for-5.18' of ↵Linus Torvalds12-163/+323
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "There has been a lot of activity in the MTD subsystem recently, with a number of SPI-NOR cleanups as well as the introduction of ECC engines that can be used by SPI controllers (hence a few SPI patches in here). Core MTD changes: - Replace the expert mode symbols with a single helper - Fix misuses of of_match_ptr() - Remove partid and partname debugfs files - tests: Fix eraseblock read speed miscalculation for lower partition sizes - TRX parser: Allow to use on MediaTek MIPS SoCs MTD driver changes: - spear_smi: use GFP_KERNEL - mchp48l640: Add SPI ID table - mchp23k256: Add SPI ID table - blkdevs: Avoid soft lockups with some mtd/spi devices - aspeed-smc: Improve probe resilience Hyperbus changes: - HBMC_AM654 should depend on ARCH_K3 NAND core changes: - ECC: - Add infrastructure to support hardware engines - Add a new helper to retrieve the ECC context - Provide a helper to retrieve a pilelined engine device NAND-ECC changes: - Macronix ECC engine: - Add Macronix external ECC engine support - Support SPI pipelined mode - Make two read-only arrays static const - Fix compile test issue Raw NAND core changes: - Fix misuses of of_match_node() - Rework of_get_nand_bus_width() - Remove of_get_nand_on_flash_bbt() wrapper - Protect access to rawnand devices while in suspend - bindings: Document the wp-gpios property Rax NAND controller driver changes: - atmel: Fix refcount issue in atmel_nand_controller_init - nandsim: - Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern - Merge repeat codes in ns_switch_state - Replace overflow check with kzalloc to single kcalloc - rockchip: Fix platform_get_irq.cocci warning - stm32_fmc2: Add NAND Write Protect support - pl353: Set the nand chip node as the flash node - brcmnand: Fix sparse warnings in bcma_nand - omap_elm: Remove redundant variable 'errors' - gpmi: - Support fast edo timings for mx28 - Validate controller clock rate - Fix controller timings setting - brcmnand: - Add BCMA shim - BCMA controller uses command shift of 0 - Allow platform data instantation - Add platform data structure for BCMA - Allow working without interrupts - Move OF operations out of brcmnand_init_cs() - Avoid pdev in brcmnand_init_cs() - Allow SoC to provide I/O operations - Assign soc as early as possible Onenand changes: - Check for error irq SPI-NAND core changes: - Delay a little bit the dirmap creation - Create direct mapping descriptors for ECC operations SPI-NAND driver changes: - macronix: Use random program load SPI NOR core changes: - Move vendor specific code out of the core into vendor drivers. - Unify all function and object names in the vendor modules. - Make setup() callback optional to improve readability. - Skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash declaration. SPI changes: - Macronix SPI controller: - Fix the transmit path - Create a helper to configure the controller before an operation - Create a helper to ease the start of an operation - Add support for direct mapping - Add support for pipelined ECC operations - spi-mem: - Introduce a capability structure - Check the controller extra capabilities - cadence-quadspi/mxic: Provide capability structures - Kill the spi_mem_dtr_supports_op() helper - Add an ecc parameter to the spi_mem_op structure Binding changes: - Dropped mtd/cortina,gemini-flash.txt - Convert BCM47xx partitions to json-schema - Vendor prefixes: Clarify Macronix prefix - SPI NAND: Convert spi-nand description file to yaml - Raw NAND chip: Create a NAND chip description - Raw NAND controller: - Harmonize the property types - Fix a comment in the examples - Fix the reg property description - Describe Macronix NAND ECC engine - Macronix SPI controller: - Document the nand-ecc-engine property - Convert to yaml - The interrupt property is not mandatory" * tag 'mtd/changes-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (104 commits) mtd: nand: ecc: mxic: Fix compile test issue mtd: nand: mxic-ecc: make two read-only arrays static const mtd: hyperbus: HBMC_AM654 should depend on ARCH_K3 mtd: core: Remove partid and partname debugfs files dt-bindings: mtd: partitions: convert BCM47xx to the json-schema mtd: tests: Fix eraseblock read speed miscalculation for lower partition sizes mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init mtd: rawnand: rockchip: fix platform_get_irq.cocci warning mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set mtd: spi-nor: renumber flags mtd: spi-nor: slightly change code style in spi_nor_sr_ready() mtd: spi-nor: spansion: rename vendor specific functions and defines mtd: spi-nor: spansion: convert USE_CLSR to a manufacturer flag mtd: spi-nor: move all spansion specifics into spansion.c mtd: spi-nor: spansion: slightly rework control flow in late_init() mtd: spi-nor: micron-st: rename vendor specific functions and defines mtd: spi-nor: micron-st: convert USE_FSR to a manufacturer flag mtd: spi-nor: move all micron-st specifics into micron-st.c mtd: spi-nor: xilinx: correct the debug message mtd: spi-nor: xilinx: rename vendor specific functions and defines ...
2022-03-25Merge tag 'for-v5.18' of ↵Linus Torvalds4-2/+21
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - Introduce "Bypass" charging type used by USB PPS standard - Refactor power_supply_set_input_current_limit_from_supplier() - Add fwnode support to power_supply_get_battery_info() Drivers: - ab8500: continue migrating towards using standard core APIs - axp288 fuel-gauge: refactor driver to be fully resource managed - battery-samsung-sdi: new in-kernel provider for (constant) Samsung battery info - bq24190: disable boost regulator on shutdown - bq24190: add support for battery-info on ACPI based systems - bq25890: prepare driver for usage on ACPI based systems - bq25890: add boost regulator support - cpcap-battery: add NVMEM based battery detection support - injoinic ip5xxx: new driver for power bank IC - upi ug3105: new battery driver - misc small improvements and fixes" * tag 'for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (94 commits) power: ab8500_chargalg: Use CLOCK_MONOTONIC power: supply: Add a driver for Injoinic power bank ICs dt-bindings: trivial-devices: Add Injoinic power bank ICs dt-bindings: vendor-prefixes: Add Injoinic power: supply: ab8500: Remove unused variable power: supply: da9150-fg: Remove unnecessary print function dev_err() power: supply: ab8500: fix a handful of spelling mistakes power: supply: ab8500_fg: Account for line impedance dt-bindings: power: supply: ab8500_fg: Add line impedance power: supply: axp20x_usb_power: fix platform_get_irq.cocci warnings power: supply: axp20x_ac_power: fix platform_get_irq.cocci warning power: supply: wm8350-power: Add missing free in free_charger_irq power: supply: wm8350-power: Handle error for wm8350_register_irq power: supply: Static data for Samsung batteries power: supply: ab8500_fg: Use VBAT-to-Ri if possible power: supply: Support VBAT-to-Ri lookup tables power: supply: ab8500: Standardize BTI resistance power: supply: ab8500: Standardize alert mode charging power: supply: ab8500: Standardize maintenance charging power: supply: bq24190_charger: Delay applying charge_type changes when OTG 5V Vbus boost is on ...
2022-03-25Merge tag 'pci-v5.18-changes' of ↵Linus Torvalds4-9/+53
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Move the VGA arbiter from drivers/gpu to drivers/pci because it's PCI-specific, not GPU-specific (Bjorn Helgaas) - Select the default VGA device consistently whether it's enumerated before or after VGA arbiter init, which fixes arches that enumerate PCI devices late (Huacai Chen) Resource management: - Support BAR sizes up to 8TB (Dongdong Liu) PCIe native device hotplug: - Fix "Command Completed" tracking to avoid spurious timouts when powering off empty slots (Liguang Zhang) - Quirk Qualcomm devices that don't implement Command Completed correctly, again to avoid spurious timeouts (Manivannan Sadhasivam) Peer-to-peer DMA: - Add Intel 3rd Gen Intel Xeon Scalable Processors to whitelist (Michael J. Ruhl) APM X-Gene PCIe controller driver: - Revert generic DT parsing changes that broke some machines in the field (Marc Zyngier) Freescale i.MX6 PCIe controller driver: - Allow controller probe to succeed even when no devices currently present to allow hot-add later (Fabio Estevam) - Enable power management on i.MX6QP (Richard Zhu) - Assert CLKREQ# on i.MX8MM so enumeration doesn't hang when no device is connected (Richard Zhu) Marvell Aardvark PCIe controller driver: - Fix MSI and MSI-X support (Marek Behún, Pali Rohár) - Add support for ERR and PME interrupts (Pali Rohár) Marvell MVEBU PCIe controller driver: - Add DT binding and support for "num-lanes" (Pali Rohár) - Add support for INTx interrupts (Pali Rohár) Microsoft Hyper-V host bridge driver: - Avoid unnecessary hypercalls when unmasking IRQs on ARM64 (Boqun Feng) Qualcomm PCIe controller driver: - Add SM8450 DT binding and driver support (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Help the controller get to the L1 state since the hardware can't do it on its own (Marek Vasut) - Return PCI_ERROR_RESPONSE (~0) for reads that fail on PCIe (Marek Vasut) SiFive FU740 PCIe controller driver: - Drop redundant '-gpios' from DT GPIO lookup (Ben Dooks) - Force 2.5GT/s for initial device probe (Ben Dooks) Socionext UniPhier Pro5 controller driver: - Add NX1 DT binding and driver support (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Restore MSI configuration so MSI works after resume (Jisheng Zhang)" * tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) x86/PCI: Add #includes to asm/pci_x86.h PCI: ibmphp: Remove unused assignments PCI: cpqphp: Remove unused assignments PCI: fu740: Remove unused assignments PCI: kirin: Remove unused assignments PCI: Remove unused assignments PCI: Declare pci_filp_private only when HAVE_PCI_MMAP PCI: Avoid broken MSI on SB600 USB devices PCI: fu740: Force 2.5GT/s for initial device probe PCI: xgene: Revert "PCI: xgene: Fix IB window setup" PCI: xgene: Revert "PCI: xgene: Use inbound resources for setup" PCI: imx6: Assert i.MX8MM CLKREQ# even if no device present PCI: imx6: Invoke the PHY exit function after PHY power off PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read which triggered an exception PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access() PCI: dwc: Restore MSI Receiver mask during resume PCI: fu740: Drop redundant '-gpios' from DT GPIO lookup PCI/VGA: Replace full MIT license text with SPDX identifier PCI/VGA: Use unsigned format string to print lock counts PCI/VGA: Log bridge control messages when adding devices ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-10 20:03:52 +0000